# $NetBSD: dot.profile,v 1.13 2000/10/31 20:53:04 pk Exp $
#
# Copyright (c) 2000 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Paul Kranenburg.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#        This product includes software developed by the NetBSD
#        Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
export PATH
HOME=/
export HOME

umask 022

INSTFS_MP=/instfs
MINIROOT_FSSIZE=10000

if [ "${BOOTFS_DONEPROFILE}" != "YES" ]; then

	BOOTFS_DONEPROFILE=YES
	export BOOTFS_DONEPROFILE

	# mount root read-write
	mount_ffs -o update /dev/md0a /

	# mount /instfs
	mount_mfs -s $MINIROOT_FSSIZE swap $INSTFS_MP
fi

# A cat simulator
cat()
{
	local l
	while read l; do
		echo "$l"
	done
}

_resp=""
getresp() {
	read _resp
	if [ "$_resp" = "" ]; then
		_resp=$1
	fi
}

# Load instfs

floppy()
{
	local dev
	cat <<EOF
First, remove the boot disk from the floppy station.

Next, insert the floppy disk labeled \`instfs' into the disk drive.
The question below allows you to specify the device name of the floppy
drive.  Usually, the default device will do just fine.
EOF
	dev="/dev/rfd0a"
	echo -n "Floppy device to load the installation utilities from [$dev]: "
	getresp "$dev"; dev="$_resp"

	echo "Extracting installation utilities... "
	(cd $INSTFS_MP && tar zxpf $dev) || return 1
}

tape()
{
	local dev fn bsa
	cat <<EOF
By default, the installation utilities are located in the second tape file
on the NetBSD/sparc installation tape. In case your tape layout is different,
choose the appropriate tape file number below.

EOF
	dev="/dev/nrst0"
	echo -n "Tape device to load the installation utilities from [$dev]: "
	getresp "$dev"; dev="$_resp"

	fn=2
	echo -n "Tape file number [$fn]: "
	getresp "$fn"; fn="$_resp"

	echo -n "Tape block size (use only if you know you need it): "
	getresp ""; if [ "$_resp" != "" ]; then
		bsa="-b $_resp"
	fi

	echo "Positioning tape... "
	mt -f $dev asf $(($fn - 1))
	[ $? = 0 ] || return 1

	echo "Extracting installation utilities... "
	(cd $INSTFS_MP && tar $bsa -z -x -p -f $dev) || return 1
}

cdrom()
{
	local dev tf rval
	cat <<EOF
The installation utilities are located on the ISO CD9660 filesystem on the
NetBSD/sparc CD-ROM. We need to mount the filesystem from the CD-ROM device
which you can specify below. Note: after the installation utilities are
extracted this filesystem will be unmounted again.

EOF

	rval=0
	dev="/dev/cd0a"
	echo -n "CD-ROM device to use [$dev]: "
	getresp "$dev"; dev="$_resp"

	mount_cd9660 -o rdonly $dev /cdrom || return 1

	tf=/cdrom/installation/bootfs/instfs.tgz
	(cd $INSTFS_MP && tar zxpf $tf) || rval=1
	umount /cdrom
	return $rval
}

cat <<EOF
Welcome to the NetBSD/sparc microroot setup utility.

We've just completed the first stage of a two-stage procedure to load a
fully functional NetBSD installation environment on your machine.  In the
second stage which is to follow now, a set of additional installation
utilities must be load from your NetBSD/sparc installation medium.

EOF

while :; do
	cat <<EOF
This procedure supports one of the following media:

	1) cdrom
	2) tape
	3) floppy

EOF
	echo -n "Installation medium to load the additional utilities from: "
	read answer
	echo ""
	case "$answer" in
		1|cdrom)	_func=cdrom;;
		2|tape)		_func=tape;;
		3|floppy)	_func=floppy;;
		*)		echo "option not supported"; continue;;
	esac
	$_func && break
done

# switch to /instfs, and pretend we logged in there.
chroot $INSTFS_MP /bin/sh /.profile

#
echo "Back in microroot; halting machine..."
halt