Changes in ad.earmv7hf

Changes in ad.earmv7hf http://nxr.netbsd.org/rss/src/distrib/sets/lists/dtb/ad.earmv7hf en Copyright 2005 Java regenerate dtb lists /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.14 Tue Mar 31 00:10:25 UTC 2026 yurix Update to handle the new DTS import. - Arm re-organisation - new dtb/dtbo files - removal of local additions where upstream has caught up /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.13 Sun Jan 18 05:50:27 UTC 2026 skrll Pandaboard work from Rui-Xiang Guo via port-arm with updates from me. https://github.com/picohive/netbsd-pandaboard /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.12 Tue Dec 16 00:20:22 UTC 2025 skrll Add a device tree for the Red Pitaya SDRlab 122-16. To boot NetBSD on the 122-16, copy the .dtb built from zynq-red-pitays-122-16.dts, the first-stage bootloader (called boot.bin) and U-Boot that came with the 122-16 and a kernel image, netbsd.ub, built for earmv7hf to an MS-DOS partition on an MBR-partitioned SD card. At the U-Boot prompt, "Zynq> ", type these commands: i2c dev 0 eeprom read 0 0x50 0 0x1804 0x400 env import -b 0 0x400 hw_rev serial ethaddr setenv bootargs "root=ld0a" fatload mmc 0 0x01f00000 device~1.dtb fatload mmc 0 0x02000000 netbsd.ub fdt addr 0x01f00000 fdt set /axi/ethernet@e000b000 local-mac-address $ethaddr bootm 0x02000000 - 0x01f00000 Note that the ethernet PHY will not attach unless you have applied the patches from Lloyd Parkes in kern/58083. /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.11 Sat May 04 02:21:48 UTC 2024 dyoung Add imx6sx dtb files /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.10 Thu May 04 13:41:46 UTC 2023 bouyer branches: 1.9.2; distrib/sets: remove duplicate entries /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.9 Sat Sep 10 15:54:11 UTC 2022 rillig regen /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.8 Fri Nov 12 21:55:46 UTC 2021 jmcneill dtb: Re-generate set lists for 5.15 /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.7 Sun Nov 07 17:11:05 UTC 2021 jmcneill Install a copy of rk3399-pinebook-pro.dtb to the base dtb directory for compatibility with the factory firmware. Normally this is frowned upon, but this is the only easy way to boot NetBSD on this board without having to crack open the case and/or hook up a serial console. /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.6 Wed Jun 02 10:31:18 UTC 2021 jmcneill Build i.MX7D dtbs for armv7 /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.5 Wed Jun 10 18:53:31 UTC 2020 jmcneill imx6 kernels are part of GENERIC now /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.4 Sat May 23 13:24:08 UTC 2020 skrll Regen /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.3 Fri May 22 23:58:22 UTC 2020 rin Sort /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.2 Fri May 22 15:55:51 UTC 2020 skrll Separate devicetree .dts -> .dtb building from kernel builds. They are now part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This defaults to yes for earmv[67]* and aarch64, and no everywhere else. /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.1 Mon May 18 21:19:34 UTC 2020 jmcneill Pull up following revision(s) (requested by bouyer in ticket #182): sys/arch/arm/nxp/imx6_platform.c: revision 1.8 (via patch) sys/arch/arm/nxp/imx6_platform.c: revision 1.9 (via patch) sys/arch/arm/nxp/imx6_ccmvar.h: revision 1.2 sys/arch/arm/nxp/imx6_ccmvar.h: revision 1.3 distrib/sets/lists/dtb/ad.earmv7hf: revision 1.10 sys/arch/arm/nxp/imx6sx_clk.c: revision 1.1 sys/arch/arm/nxp/imx6_ccm.c: revision 1.3 sys/arch/arm/nxp/imx6sx_clk.c: revision 1.2 sys/arch/arm/nxp/imx6_ccm.c: revision 1.4 sys/arch/arm/nxp/imx6sx_clk.c: revision 1.3 sys/arch/arm/nxp/imx6_spi.c: revision 1.8 sys/arch/arm/nxp/imx_sdhc.c: revision 1.8 sys/arch/arm/imx/imxusb.c: revision 1.19 sys/arch/arm/nxp/imx6_usb.c: revision 1.7 sys/arch/arm/nxp/imx6_usb.c: revision 1.8 sys/arch/arm/nxp/files.imx: revision 1.3 sys/arch/arm/nxp/imx6_clk.c: revision 1.5 sys/arch/arm/nxp/imx6_clk.c: revision 1.6 sys/arch/arm/nxp/imx6_reg.h: revision 1.2 sys/arch/arm/nxp/imx6_gpc.c: revision 1.4 sys/arch/arm/imx/imx23_usb.c: revision 1.6 sys/dtb/arm/Makefile: revision 1.6 sys/arch/arm/imx/imxusbvar.h: revision 1.7 sys/arch/evbarm/conf/GENERIC: revision 1.119 sys/arch/arm/nxp/imx6_ccmreg.h: revision 1.2 sys/arch/arm/nxp/imx6_iomux.c: revision 1.3 sys/arch/arm/nxp/imx6_usbphy.c: revision 1.3 sys/arch/arm/nxp/imx6_pcie.c: revision 1.7 In preparation of imx6sx support, move imx6q-specific definitions from imx6_ccm.c to imx6_clk.c, and prefix with IMX6Q/imx6q: - Clock IDs and related struct imx_clock_id - Clock Parents and Divider Tables - struct imx6_clk and related static functions Add a pointer to struct imx6_clk, and it's size to imx6ccm_softc Pass a pointer to imx6ccm_softc to all functions from imx6_ccm.c NFCI i.mx6sx CPU support in the CCM module: the clock tree si different from the i.mx6q - move i.mx6q-specific functions and data to imx6_clk.c - add i.mx6sx specific imx6sx_clk.c - add a imx6sxccm device i.mx6sx platform support: - the i.mx6sx has a third AIPS, so KERNEL_IO_IOREG map has to be larger - the uart clock is at 24Mhz instead of 80. Add i.mx6sx compatible entries to drivers that should work as is. Fix typo, preventing i2c4 from attaching remove commented out entries, leftover from the imx6q ccm code. introduce imx6sx_platform_bootstrap(), which calls imx_platform_bootstrap() and then checks for an "arm,cortex-a9-twd-timer" compatible entry in the fdt. If not present, create one so that a9ptmr will attach. We need this entry as this is the only timer we support for this platform, but the upstream imx6sx.dtsi is missing the entry for it (and all A9 CPUs have it anyway). Thanks to Jared McNeill for advices and review. Also build dtb files for CONFIG_SOC_IMX6SX experimental IMX6SX support: - add options SOC_IMX6SX - add imx6sxccm device tested on a UDOO Neo Full board. known to work: - uart (console) - sdmmc0 - ethernet (enet0) known to not work: - USB (device not detected). needs a modified device tree at this time (add arm,cortex-a9-twd-timer entry copied from the imx6qdl dtsi); for unkown reason the imx6sx.dtsi file lacks an entry for the a9ptmr although it is present in the soc (and, from what I understood, in all cortex A9 SoCs). Add imx6sx dtb files The i.mx6sx has 2 OTG and one host-only USB controller, while the 6q has only one OTG. Add a "uintptr_t data" argument to all sc_*_md_hook callbacks, which gets the sc_md_hook_data value when called. In imx6_usb.c use this to pass the number of OTG controllers to the callbacks. imx6_usb_init() can then properly call init_otg() or init_h1() for unit 1. In imx6_usb_attach(), test if there is a vbus-supply property in the fdt, and enable the regulator if present. Now the USB port of the UDOO Neo works. /src/distrib/sets/lists/dtb/ad.earmv7hf - 1.9.2.1 Sun May 28 10:14:36 UTC 2023 martin