Searched hist:121 (Results 1 - 22 of 22) sorted by relevance

/src/sys/arch/macppc/macppc/
H A Dstatic_edid.c1.2 Mon Jan 28 02:25:01 GMT 2019 sevan Fake the EDID info for the clamshell iBook G3 so X11 works out of the box.
Obtained from the 2nd (firewire) revision iBook, but it's applied to 1st gen
also.

[ 93.906] (II) R128(0): I2C bus "VGA-0" initialized.
[ 93.907] (II) got 128 bytes worth of EDID from wsdisplay
[ 93.908] (II) R128(0): EDID for output LVDS
[ 93.908] (II) R128(0): Manufacturer: APP Model: 9c05 Serial#: 16843009
[ 93.908] (II) R128(0): Year: 1999 Week: 9
[ 93.908] (II) R128(0): EDID Version: 1.1
[ 93.908] (II) R128(0): Digital Display Input
[ 93.908] (II) R128(0): Max Image Size [cm]: horiz.: 24 vert.: 18
[ 93.908] (II) R128(0): Gamma: 2.28
[ 93.908] (II) R128(0): DPMS capabilities: StandBy Suspend Off
[ 93.909] (II) R128(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 93.909] (II) R128(0): redX: 0.594 redY: 0.345 greenX: 0.317 greenY: 0.494
[ 93.909] (II) R128(0): blueX: 0.155 blueY: 0.146 whiteX: 0.312 whiteY: 0.328
[ 93.909] (II) R128(0): Supported established timings:
[ 93.909] (II) R128(0): 800x600@60Hz
[ 93.909] (II) R128(0): Manufacturer's mask: 0
[ 93.910] (II) R128(0): Supported detailed timing:
[ 93.910] (II) R128(0): clock: 60.0 MHz Image Size: 275 x 199 mm
[ 93.910] (II) R128(0): h_active: 800 h_sync: 840 h_sync_end 968 h_blank_end 1056 h_border: 0
[ 93.910] (II) R128(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): Monitor name: Color LCD
[ 93.910] (II) R128(0): EDID (in hex):
[ 93.910] (II) R128(0): 00ffffffffffff000610059c01010101
[ 93.910] (II) R128(0): 09090101a8181280e816e09858517e27
[ 93.910] (II) R128(0): 25505401000001010101010101010101
[ 93.911] (II) R128(0): 0101010101017017200031581c202880
[ 93.911] (II) R128(0): 140013c710000018000000fe004c5431
[ 93.911] (II) R128(0): 323153552d3132310a20000000fe004c
[ 93.911] (II) R128(0): 5431323153552d3132310a20000000fc
[ 93.911] (II) R128(0): 00436f6c6f72204c43440a2020200037
[ 93.912] (II) R128(0): I2C device "VGA-0:ddc2" registered at address 0xA0.

1.2 Mon Jan 28 02:25:01 GMT 2019 sevan Fake the EDID info for the clamshell iBook G3 so X11 works out of the box.
Obtained from the 2nd (firewire) revision iBook, but it's applied to 1st gen
also.

[ 93.906] (II) R128(0): I2C bus "VGA-0" initialized.
[ 93.907] (II) got 128 bytes worth of EDID from wsdisplay
[ 93.908] (II) R128(0): EDID for output LVDS
[ 93.908] (II) R128(0): Manufacturer: APP Model: 9c05 Serial#: 16843009
[ 93.908] (II) R128(0): Year: 1999 Week: 9
[ 93.908] (II) R128(0): EDID Version: 1.1
[ 93.908] (II) R128(0): Digital Display Input
[ 93.908] (II) R128(0): Max Image Size [cm]: horiz.: 24 vert.: 18
[ 93.908] (II) R128(0): Gamma: 2.28
[ 93.908] (II) R128(0): DPMS capabilities: StandBy Suspend Off
[ 93.909] (II) R128(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 93.909] (II) R128(0): redX: 0.594 redY: 0.345 greenX: 0.317 greenY: 0.494
[ 93.909] (II) R128(0): blueX: 0.155 blueY: 0.146 whiteX: 0.312 whiteY: 0.328
[ 93.909] (II) R128(0): Supported established timings:
[ 93.909] (II) R128(0): 800x600@60Hz
[ 93.909] (II) R128(0): Manufacturer's mask: 0
[ 93.910] (II) R128(0): Supported detailed timing:
[ 93.910] (II) R128(0): clock: 60.0 MHz Image Size: 275 x 199 mm
[ 93.910] (II) R128(0): h_active: 800 h_sync: 840 h_sync_end 968 h_blank_end 1056 h_border: 0
[ 93.910] (II) R128(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): Monitor name: Color LCD
[ 93.910] (II) R128(0): EDID (in hex):
[ 93.910] (II) R128(0): 00ffffffffffff000610059c01010101
[ 93.910] (II) R128(0): 09090101a8181280e816e09858517e27
[ 93.910] (II) R128(0): 25505401000001010101010101010101
[ 93.911] (II) R128(0): 0101010101017017200031581c202880
[ 93.911] (II) R128(0): 140013c710000018000000fe004c5431
[ 93.911] (II) R128(0): 323153552d3132310a20000000fe004c
[ 93.911] (II) R128(0): 5431323153552d3132310a20000000fc
[ 93.911] (II) R128(0): 00436f6c6f72204c43440a2020200037
[ 93.912] (II) R128(0): I2C device "VGA-0:ddc2" registered at address 0xA0.

H A Dstatic_edid.h1.2 Mon Jan 28 02:25:01 GMT 2019 sevan Fake the EDID info for the clamshell iBook G3 so X11 works out of the box.
Obtained from the 2nd (firewire) revision iBook, but it's applied to 1st gen
also.

[ 93.906] (II) R128(0): I2C bus "VGA-0" initialized.
[ 93.907] (II) got 128 bytes worth of EDID from wsdisplay
[ 93.908] (II) R128(0): EDID for output LVDS
[ 93.908] (II) R128(0): Manufacturer: APP Model: 9c05 Serial#: 16843009
[ 93.908] (II) R128(0): Year: 1999 Week: 9
[ 93.908] (II) R128(0): EDID Version: 1.1
[ 93.908] (II) R128(0): Digital Display Input
[ 93.908] (II) R128(0): Max Image Size [cm]: horiz.: 24 vert.: 18
[ 93.908] (II) R128(0): Gamma: 2.28
[ 93.908] (II) R128(0): DPMS capabilities: StandBy Suspend Off
[ 93.909] (II) R128(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 93.909] (II) R128(0): redX: 0.594 redY: 0.345 greenX: 0.317 greenY: 0.494
[ 93.909] (II) R128(0): blueX: 0.155 blueY: 0.146 whiteX: 0.312 whiteY: 0.328
[ 93.909] (II) R128(0): Supported established timings:
[ 93.909] (II) R128(0): 800x600@60Hz
[ 93.909] (II) R128(0): Manufacturer's mask: 0
[ 93.910] (II) R128(0): Supported detailed timing:
[ 93.910] (II) R128(0): clock: 60.0 MHz Image Size: 275 x 199 mm
[ 93.910] (II) R128(0): h_active: 800 h_sync: 840 h_sync_end 968 h_blank_end 1056 h_border: 0
[ 93.910] (II) R128(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): Monitor name: Color LCD
[ 93.910] (II) R128(0): EDID (in hex):
[ 93.910] (II) R128(0): 00ffffffffffff000610059c01010101
[ 93.910] (II) R128(0): 09090101a8181280e816e09858517e27
[ 93.910] (II) R128(0): 25505401000001010101010101010101
[ 93.911] (II) R128(0): 0101010101017017200031581c202880
[ 93.911] (II) R128(0): 140013c710000018000000fe004c5431
[ 93.911] (II) R128(0): 323153552d3132310a20000000fe004c
[ 93.911] (II) R128(0): 5431323153552d3132310a20000000fc
[ 93.911] (II) R128(0): 00436f6c6f72204c43440a2020200037
[ 93.912] (II) R128(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
1.2 Mon Jan 28 02:25:01 GMT 2019 sevan Fake the EDID info for the clamshell iBook G3 so X11 works out of the box.
Obtained from the 2nd (firewire) revision iBook, but it's applied to 1st gen
also.

[ 93.906] (II) R128(0): I2C bus "VGA-0" initialized.
[ 93.907] (II) got 128 bytes worth of EDID from wsdisplay
[ 93.908] (II) R128(0): EDID for output LVDS
[ 93.908] (II) R128(0): Manufacturer: APP Model: 9c05 Serial#: 16843009
[ 93.908] (II) R128(0): Year: 1999 Week: 9
[ 93.908] (II) R128(0): EDID Version: 1.1
[ 93.908] (II) R128(0): Digital Display Input
[ 93.908] (II) R128(0): Max Image Size [cm]: horiz.: 24 vert.: 18
[ 93.908] (II) R128(0): Gamma: 2.28
[ 93.908] (II) R128(0): DPMS capabilities: StandBy Suspend Off
[ 93.909] (II) R128(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 93.909] (II) R128(0): redX: 0.594 redY: 0.345 greenX: 0.317 greenY: 0.494
[ 93.909] (II) R128(0): blueX: 0.155 blueY: 0.146 whiteX: 0.312 whiteY: 0.328
[ 93.909] (II) R128(0): Supported established timings:
[ 93.909] (II) R128(0): 800x600@60Hz
[ 93.909] (II) R128(0): Manufacturer's mask: 0
[ 93.910] (II) R128(0): Supported detailed timing:
[ 93.910] (II) R128(0): clock: 60.0 MHz Image Size: 275 x 199 mm
[ 93.910] (II) R128(0): h_active: 800 h_sync: 840 h_sync_end 968 h_blank_end 1056 h_border: 0
[ 93.910] (II) R128(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): Monitor name: Color LCD
[ 93.910] (II) R128(0): EDID (in hex):
[ 93.910] (II) R128(0): 00ffffffffffff000610059c01010101
[ 93.910] (II) R128(0): 09090101a8181280e816e09858517e27
[ 93.910] (II) R128(0): 25505401000001010101010101010101
[ 93.911] (II) R128(0): 0101010101017017200031581c202880
[ 93.911] (II) R128(0): 140013c710000018000000fe004c5431
[ 93.911] (II) R128(0): 323153552d3132310a20000000fe004c
[ 93.911] (II) R128(0): 5431323153552d3132310a20000000fc
[ 93.911] (II) R128(0): 00436f6c6f72204c43440a2020200037
[ 93.912] (II) R128(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
H A Dmachdep.c1.169 Mon Jan 28 02:25:01 GMT 2019 sevan Fake the EDID info for the clamshell iBook G3 so X11 works out of the box.
Obtained from the 2nd (firewire) revision iBook, but it's applied to 1st gen
also.

[ 93.906] (II) R128(0): I2C bus "VGA-0" initialized.
[ 93.907] (II) got 128 bytes worth of EDID from wsdisplay
[ 93.908] (II) R128(0): EDID for output LVDS
[ 93.908] (II) R128(0): Manufacturer: APP Model: 9c05 Serial#: 16843009
[ 93.908] (II) R128(0): Year: 1999 Week: 9
[ 93.908] (II) R128(0): EDID Version: 1.1
[ 93.908] (II) R128(0): Digital Display Input
[ 93.908] (II) R128(0): Max Image Size [cm]: horiz.: 24 vert.: 18
[ 93.908] (II) R128(0): Gamma: 2.28
[ 93.908] (II) R128(0): DPMS capabilities: StandBy Suspend Off
[ 93.909] (II) R128(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 93.909] (II) R128(0): redX: 0.594 redY: 0.345 greenX: 0.317 greenY: 0.494
[ 93.909] (II) R128(0): blueX: 0.155 blueY: 0.146 whiteX: 0.312 whiteY: 0.328
[ 93.909] (II) R128(0): Supported established timings:
[ 93.909] (II) R128(0): 800x600@60Hz
[ 93.909] (II) R128(0): Manufacturer's mask: 0
[ 93.910] (II) R128(0): Supported detailed timing:
[ 93.910] (II) R128(0): clock: 60.0 MHz Image Size: 275 x 199 mm
[ 93.910] (II) R128(0): h_active: 800 h_sync: 840 h_sync_end 968 h_blank_end 1056 h_border: 0
[ 93.910] (II) R128(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): Monitor name: Color LCD
[ 93.910] (II) R128(0): EDID (in hex):
[ 93.910] (II) R128(0): 00ffffffffffff000610059c01010101
[ 93.910] (II) R128(0): 09090101a8181280e816e09858517e27
[ 93.910] (II) R128(0): 25505401000001010101010101010101
[ 93.911] (II) R128(0): 0101010101017017200031581c202880
[ 93.911] (II) R128(0): 140013c710000018000000fe004c5431
[ 93.911] (II) R128(0): 323153552d3132310a20000000fe004c
[ 93.911] (II) R128(0): 5431323153552d3132310a20000000fc
[ 93.911] (II) R128(0): 00436f6c6f72204c43440a2020200037
[ 93.912] (II) R128(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
1.169 Mon Jan 28 02:25:01 GMT 2019 sevan Fake the EDID info for the clamshell iBook G3 so X11 works out of the box.
Obtained from the 2nd (firewire) revision iBook, but it's applied to 1st gen
also.

[ 93.906] (II) R128(0): I2C bus "VGA-0" initialized.
[ 93.907] (II) got 128 bytes worth of EDID from wsdisplay
[ 93.908] (II) R128(0): EDID for output LVDS
[ 93.908] (II) R128(0): Manufacturer: APP Model: 9c05 Serial#: 16843009
[ 93.908] (II) R128(0): Year: 1999 Week: 9
[ 93.908] (II) R128(0): EDID Version: 1.1
[ 93.908] (II) R128(0): Digital Display Input
[ 93.908] (II) R128(0): Max Image Size [cm]: horiz.: 24 vert.: 18
[ 93.908] (II) R128(0): Gamma: 2.28
[ 93.908] (II) R128(0): DPMS capabilities: StandBy Suspend Off
[ 93.909] (II) R128(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 93.909] (II) R128(0): redX: 0.594 redY: 0.345 greenX: 0.317 greenY: 0.494
[ 93.909] (II) R128(0): blueX: 0.155 blueY: 0.146 whiteX: 0.312 whiteY: 0.328
[ 93.909] (II) R128(0): Supported established timings:
[ 93.909] (II) R128(0): 800x600@60Hz
[ 93.909] (II) R128(0): Manufacturer's mask: 0
[ 93.910] (II) R128(0): Supported detailed timing:
[ 93.910] (II) R128(0): clock: 60.0 MHz Image Size: 275 x 199 mm
[ 93.910] (II) R128(0): h_active: 800 h_sync: 840 h_sync_end 968 h_blank_end 1056 h_border: 0
[ 93.910] (II) R128(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): LT121SU-121
[ 93.910] (II) R128(0): Monitor name: Color LCD
[ 93.910] (II) R128(0): EDID (in hex):
[ 93.910] (II) R128(0): 00ffffffffffff000610059c01010101
[ 93.910] (II) R128(0): 09090101a8181280e816e09858517e27
[ 93.910] (II) R128(0): 25505401000001010101010101010101
[ 93.911] (II) R128(0): 0101010101017017200031581c202880
[ 93.911] (II) R128(0): 140013c710000018000000fe004c5431
[ 93.911] (II) R128(0): 323153552d3132310a20000000fe004c
[ 93.911] (II) R128(0): 5431323153552d3132310a20000000fc
[ 93.911] (II) R128(0): 00436f6c6f72204c43440a2020200037
[ 93.912] (II) R128(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
/src/distrib/virt68k/liveimage/
H A DMakefile1.1 Sun Jan 19 04:58:42 GMT 2025 tsutsui Add "build.sh live-image" support for virt68k.

Briefly tested with qemu-system-m68k 9.1.2:
---
% qemu-system-m68k -machine virt \
-drive file=NetBSD-10.99.12-virt68k-live.img,if=none,format=raw,id=disk \
-device virtio-blk-device,drive=disk \
-netdev user,id=net -device virtio-net-device,netdev=net \
-kernel netbsd.virt68k -append root=ld0 -nographic
[ 1.0000000] Initialized Goldfish TTY console @ 0xff008000
[ 1.0000000] Memory segment 0: addr=0x00442000 size=0x07bbe000
[ 1.0000000] entropy: ready
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 10.99.12 (GENERIC) #1: Sun Jan 19 12:45:27 JST 2025
[ 1.0000000] tsutsui@mirage:/s/cvs/src/sys/arch/virt68k/compile/GENERIC
[ 1.0000000] Qemu 9.1.2: MC68040+MMU+FPU, 4k+4k on-chip physical I/D caches
[ 1.0000000] total memory = 128 MB
[ 1.0000000] avail memory = 121 MB
[ 1.0000000] mainbus0 (root)

:

[ 1.2800030] root on ld0a dumps on ld0b
[ 1.3000030] root file system type: ffs
[ 1.3100030] kern.module.path=/stand/virt68k/10.99.12/modules
Sun Jan 19 04:55:45 UTC 2025
Starting root file system check:
/dev/rld0a: file system is clean; not checking

:

Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Sun Jan 19 04:56:06 UTC 2025

NetBSD/virt68k (Amnesiac) (constty)

login:
---

/src/distrib/virt68k/liveimage/emuimage/
H A DMakefile1.1 Sun Jan 19 04:58:43 GMT 2025 tsutsui Add "build.sh live-image" support for virt68k.

Briefly tested with qemu-system-m68k 9.1.2:
---
% qemu-system-m68k -machine virt \
-drive file=NetBSD-10.99.12-virt68k-live.img,if=none,format=raw,id=disk \
-device virtio-blk-device,drive=disk \
-netdev user,id=net -device virtio-net-device,netdev=net \
-kernel netbsd.virt68k -append root=ld0 -nographic
[ 1.0000000] Initialized Goldfish TTY console @ 0xff008000
[ 1.0000000] Memory segment 0: addr=0x00442000 size=0x07bbe000
[ 1.0000000] entropy: ready
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 10.99.12 (GENERIC) #1: Sun Jan 19 12:45:27 JST 2025
[ 1.0000000] tsutsui@mirage:/s/cvs/src/sys/arch/virt68k/compile/GENERIC
[ 1.0000000] Qemu 9.1.2: MC68040+MMU+FPU, 4k+4k on-chip physical I/D caches
[ 1.0000000] total memory = 128 MB
[ 1.0000000] avail memory = 121 MB
[ 1.0000000] mainbus0 (root)

:

[ 1.2800030] root on ld0a dumps on ld0b
[ 1.3000030] root file system type: ffs
[ 1.3100030] kern.module.path=/stand/virt68k/10.99.12/modules
Sun Jan 19 04:55:45 UTC 2025
Starting root file system check:
/dev/rld0a: file system is clean; not checking

:

Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Sun Jan 19 04:56:06 UTC 2025

NetBSD/virt68k (Amnesiac) (constty)

login:
---

/src/distrib/virt68k/
H A DMakefile1.2 Sun Jan 19 04:58:42 GMT 2025 tsutsui Add "build.sh live-image" support for virt68k.

Briefly tested with qemu-system-m68k 9.1.2:
---
% qemu-system-m68k -machine virt \
-drive file=NetBSD-10.99.12-virt68k-live.img,if=none,format=raw,id=disk \
-device virtio-blk-device,drive=disk \
-netdev user,id=net -device virtio-net-device,netdev=net \
-kernel netbsd.virt68k -append root=ld0 -nographic
[ 1.0000000] Initialized Goldfish TTY console @ 0xff008000
[ 1.0000000] Memory segment 0: addr=0x00442000 size=0x07bbe000
[ 1.0000000] entropy: ready
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.

[ 1.0000000] NetBSD 10.99.12 (GENERIC) #1: Sun Jan 19 12:45:27 JST 2025
[ 1.0000000] tsutsui@mirage:/s/cvs/src/sys/arch/virt68k/compile/GENERIC
[ 1.0000000] Qemu 9.1.2: MC68040+MMU+FPU, 4k+4k on-chip physical I/D caches
[ 1.0000000] total memory = 128 MB
[ 1.0000000] avail memory = 121 MB
[ 1.0000000] mainbus0 (root)

:

[ 1.2800030] root on ld0a dumps on ld0b
[ 1.3000030] root file system type: ffs
[ 1.3100030] kern.module.path=/stand/virt68k/10.99.12/modules
Sun Jan 19 04:55:45 UTC 2025
Starting root file system check:
/dev/rld0a: file system is clean; not checking

:

Starting inetd.
Starting cron.
The following components reported failures:
/etc/rc.d/postfix
See /var/run/rc.log for more information.
Sun Jan 19 04:56:06 UTC 2025

NetBSD/virt68k (Amnesiac) (constty)

login:
---

/src/bin/sh/
H A Dexpand.h1.22 Sat Jun 03 10:31:16 GMT 2017 kre branches: 1.22.2;
Fixes to shell expand (that is, $ stuff) from FreeBSD (implemented
differently...)

In particular ${01} is now $1 not $0 (for ${0any-digits})

${4294967297} is most probably now ""
(unless you have a very large number of params)
it is no longer an alias for $1 (4294967297 & 0xFFFFFFFF) == 1

$(( expr $(( more )) stuff )) is no longer the same as
$(( expr (( more )) stuff )) which was sometimes OK, as in:
$(( 3 + $(( 2 - 1 )) * 3 ))
but not always as in:
$(( 1$((1 + 1))1 ))
which should be 121, but was an arith syntax error as
1((1 + 1))1
is meaningless.

Probably some more. This also sprinkles a little const, splits a big
func that had 2 (kind of unrelated) purposes into two simpler ones,
and avoids some (semi-dubious) modifications (and restores) in the input
string to insert \0's when they were needed.

H A Dmemalloc.h1.16 Sat Jun 03 10:31:16 GMT 2017 kre branches: 1.16.2;
Fixes to shell expand (that is, $ stuff) from FreeBSD (implemented
differently...)

In particular ${01} is now $1 not $0 (for ${0any-digits})

${4294967297} is most probably now ""
(unless you have a very large number of params)
it is no longer an alias for $1 (4294967297 & 0xFFFFFFFF) == 1

$(( expr $(( more )) stuff )) is no longer the same as
$(( expr (( more )) stuff )) which was sometimes OK, as in:
$(( 3 + $(( 2 - 1 )) * 3 ))
but not always as in:
$(( 1$((1 + 1))1 ))
which should be 121, but was an arith syntax error as
1((1 + 1))1
is meaningless.

Probably some more. This also sprinkles a little const, splits a big
func that had 2 (kind of unrelated) purposes into two simpler ones,
and avoids some (semi-dubious) modifications (and restores) in the input
string to insert \0's when they were needed.

H A Dexpand.c1.107 Sat Jun 03 10:31:16 GMT 2017 kre Fixes to shell expand (that is, $ stuff) from FreeBSD (implemented
differently...)

In particular ${01} is now $1 not $0 (for ${0any-digits})

${4294967297} is most probably now ""
(unless you have a very large number of params)
it is no longer an alias for $1 (4294967297 & 0xFFFFFFFF) == 1

$(( expr $(( more )) stuff )) is no longer the same as
$(( expr (( more )) stuff )) which was sometimes OK, as in:
$(( 3 + $(( 2 - 1 )) * 3 ))
but not always as in:
$(( 1$((1 + 1))1 ))
which should be 121, but was an arith syntax error as
1((1 + 1))1
is meaningless.

Probably some more. This also sprinkles a little const, splits a big
func that had 2 (kind of unrelated) purposes into two simpler ones,
and avoids some (semi-dubious) modifications (and restores) in the input
string to insert \0's when they were needed.
H A Dparser.c1.131 Sat Jun 03 10:31:16 GMT 2017 kre Fixes to shell expand (that is, $ stuff) from FreeBSD (implemented
differently...)

In particular ${01} is now $1 not $0 (for ${0any-digits})

${4294967297} is most probably now ""
(unless you have a very large number of params)
it is no longer an alias for $1 (4294967297 & 0xFFFFFFFF) == 1

$(( expr $(( more )) stuff )) is no longer the same as
$(( expr (( more )) stuff )) which was sometimes OK, as in:
$(( 3 + $(( 2 - 1 )) * 3 ))
but not always as in:
$(( 1$((1 + 1))1 ))
which should be 121, but was an arith syntax error as
1((1 + 1))1
is meaningless.

Probably some more. This also sprinkles a little const, splits a big
func that had 2 (kind of unrelated) purposes into two simpler ones,
and avoids some (semi-dubious) modifications (and restores) in the input
string to insert \0's when they were needed.
/src/etc/
H A Dservices1.54 Thu May 23 04:34:39 GMT 2002 simonb Add port 121/udp (erpc).
/src/sys/arch/mac68k/conf/
H A DINSTALL1.58 Thu Jan 05 18:48:13 GMT 2023 tsutsui Disable (comment out) options DIAGNOSTIC in INSTALL kernels.

It has been there since the initial revision 1.1 while
it was disabled in GENERIC in revision 1.121 back in 2002:
http://cvsweb.netbsd.org/bsdweb.cgi/src/sys/arch/mac68k/conf/GENERIC#rev1.121

Briefly discussed in PR/57107, and maybe should be pulled up to
netbsd-9 and netbsd-10.
/src/usr.bin/indent/
H A Dindent.h1.23 Sat Sep 25 19:49:13 GMT 2021 rillig indent: reduce code and data size for lexing of numbers

Instead of having a table of strings (121 pointers + 121 data
relocations), reduce that table to the actual character data and use a
secondary table for looking up the correct row in the main table.

No functional change.
1.23 Sat Sep 25 19:49:13 GMT 2021 rillig indent: reduce code and data size for lexing of numbers

Instead of having a table of strings (121 pointers + 121 data
relocations), reduce that table to the actual character data and use a
secondary table for looking up the correct row in the main table.

No functional change.
H A Dlexi.c1.56 Sat Sep 25 19:49:13 GMT 2021 rillig indent: reduce code and data size for lexing of numbers

Instead of having a table of strings (121 pointers + 121 data
relocations), reduce that table to the actual character data and use a
secondary table for looking up the correct row in the main table.

No functional change.
1.56 Sat Sep 25 19:49:13 GMT 2021 rillig indent: reduce code and data size for lexing of numbers

Instead of having a table of strings (121 pointers + 121 data
relocations), reduce that table to the actual character data and use a
secondary table for looking up the correct row in the main table.

No functional change.
H A Dindent.c1.77 Sat Sep 25 19:49:13 GMT 2021 rillig indent: reduce code and data size for lexing of numbers

Instead of having a table of strings (121 pointers + 121 data
relocations), reduce that table to the actual character data and use a
secondary table for looking up the correct row in the main table.

No functional change.
1.77 Sat Sep 25 19:49:13 GMT 2021 rillig indent: reduce code and data size for lexing of numbers

Instead of having a table of strings (121 pointers + 121 data
relocations), reduce that table to the actual character data and use a
secondary table for looking up the correct row in the main table.

No functional change.
/src/sys/dev/usb/
H A Dif_urtwn.c1.85 Sat Apr 04 08:46:01 GMT 2020 skrll branches: 1.85.2;
Add D-Link DWA-121 rev B1 to list of supported devices

From Miguel Landaeta in kern/55140
H A Dusbdevs1.778 Sat Apr 04 08:43:23 GMT 2020 skrll Add D-Link DWA-121 rev B1

From Miguel Landaeta in kern/55140
/src/tests/usr.bin/xlint/lint1/
H A Dt_integration.sh1.48 Mon May 03 03:50:43 GMT 2021 rillig branches: 1.48.2;
tests/lint: remove outdated comment

The test d_gcc_extension is already activated in line 121.
/src/
H A Dbuild.sh1.396 Tue May 13 01:09:55 GMT 2025 riastradh build.sh: Clarify revisionid a little bit.

1. Put the CVS tag back -- this was lost in 1.393, and I suspect it
was unintentional (martin: feel free to correct me if my suspicion
is wrong and you really meant to nix the CVS tag).

2. Identify the revision control system in the commit id so you don't
have to wonder if you are just missing this changeset id or you're
mixing up git and hg.

3. Separate with spaces rather than hyphens so there is a chance to
parse this later -- tags/branches tend to allow hyphens but not
spaces. (If there's a reason not to use spaces, it's not clear to
me.)

Evenutally I would like to change this to an even more semantically
meaningful identifier, something like

hg identify -T '{latesttag}-{changessincelatesttag}{ifeq(phase,"public","","!{phase")}-hg-{id}{dirty}'

so it would come out as something like:

netbsd-11.99.3-121-hg-0123abcd4567ef

if this is a public commit on trunk with a clean working tree, or

netbsd-11.99.3-123!draft-hg-89ab01cd23ef45+

if this is a draft commit on trunk with a dirty working tree. But
for this to be useful we have to have the tags assigned, which is not
currently done in the ongoing conversion -- to be fixed in the final
migration.
1.396 Tue May 13 01:09:55 GMT 2025 riastradh build.sh: Clarify revisionid a little bit.

1. Put the CVS tag back -- this was lost in 1.393, and I suspect it
was unintentional (martin: feel free to correct me if my suspicion
is wrong and you really meant to nix the CVS tag).

2. Identify the revision control system in the commit id so you don't
have to wonder if you are just missing this changeset id or you're
mixing up git and hg.

3. Separate with spaces rather than hyphens so there is a chance to
parse this later -- tags/branches tend to allow hyphens but not
spaces. (If there's a reason not to use spaces, it's not clear to
me.)

Evenutally I would like to change this to an even more semantically
meaningful identifier, something like

hg identify -T '{latesttag}-{changessincelatesttag}{ifeq(phase,"public","","!{phase")}-hg-{id}{dirty}'

so it would come out as something like:

netbsd-11.99.3-121-hg-0123abcd4567ef

if this is a public commit on trunk with a clean working tree, or

netbsd-11.99.3-123!draft-hg-89ab01cd23ef45+

if this is a draft commit on trunk with a dirty working tree. But
for this to be useful we have to have the tags assigned, which is not
currently done in the ongoing conversion -- to be fixed in the final
migration.
/src/lib/libpthread/
H A Dpthread_int.h1.114 Wed Apr 02 14:23:34 GMT 2025 riastradh pthread_cancel(3): Use _Atomic consistently with C11 atomics.

Should fix clang build:

/home/source/ab/HEAD-llvm/src/lib/libpthread/pthread.c:1264:8: error: address argument to atomic operation must be a pointer to _Atomic type ('volatile unsigned int *' invalid)
(atomic_load_relaxed(&self->pt_cancel) &
^ ~~~~~~~~~~~~~~~~
/home/source/ab/HEAD-llvm/src/lib/libpthread/pthread.c:74:2: note: expanded from macro 'atomic_load_relaxed'
atomic_load_explicit(p, memory_order_relaxed)
^ ~
/home/builds/ab/HEAD-llvm/amd64/202504020240Z-dest/usr/include/clang-13.0/stdatomic.h:121:30: note: expanded from macro 'atomic_load_explicit'
#define atomic_load_explicit __c11_atomic_load

PR lib/59134: POSIX-1.2024: pthread_setcancelstate must be
async-signal-safe

H A Dpthread.c1.187 Wed Apr 02 14:23:34 GMT 2025 riastradh pthread_cancel(3): Use _Atomic consistently with C11 atomics.

Should fix clang build:

/home/source/ab/HEAD-llvm/src/lib/libpthread/pthread.c:1264:8: error: address argument to atomic operation must be a pointer to _Atomic type ('volatile unsigned int *' invalid)
(atomic_load_relaxed(&self->pt_cancel) &
^ ~~~~~~~~~~~~~~~~
/home/source/ab/HEAD-llvm/src/lib/libpthread/pthread.c:74:2: note: expanded from macro 'atomic_load_relaxed'
atomic_load_explicit(p, memory_order_relaxed)
^ ~
/home/builds/ab/HEAD-llvm/amd64/202504020240Z-dest/usr/include/clang-13.0/stdatomic.h:121:30: note: expanded from macro 'atomic_load_explicit'
#define atomic_load_explicit __c11_atomic_load

PR lib/59134: POSIX-1.2024: pthread_setcancelstate must be
async-signal-safe
/src/distrib/sets/lists/base/
H A Dshl.mi1.276 Sat Jul 03 14:35:29 GMT 2004 tron The minor of "libc" was bumped to 121.

Completed in 286 milliseconds