AMIGA revision 1.61.2.7
1 1.61.2.7 skrll # $NetBSD: AMIGA,v 1.61.2.7 2005/02/04 11:44:14 skrll Exp $ 2 1.9 is # 3 1.53 lukem # This file was automatically created. 4 1.53 lukem # Changes will be lost when make is run in this directory. 5 1.9 is # 6 1.61.2.7 skrll # Created from: # NetBSD: GENERIC.in,v 1.30 2005/01/31 16:54:33 hannken Exp $ 7 1.53 lukem # 8 1.53 lukem # GENERIC machine description file 9 1.53 lukem # 10 1.53 lukem # This machine description file is used to generate the default NetBSD 11 1.53 lukem # kernel. The generic kernel does not include all options, subsystems 12 1.53 lukem # and device drivers, but should be useful for most applications. 13 1.53 lukem # 14 1.53 lukem # The machine description file can be customised for your specific 15 1.53 lukem # machine to reduce the kernel size and improve its performance. 16 1.53 lukem # 17 1.53 lukem # For further information on compiling NetBSD kernels, see the config(8) 18 1.53 lukem # man page. 19 1.53 lukem # 20 1.53 lukem # For further information on hardware support for this architecture, see 21 1.53 lukem # the intro(4) man page. For further information about kernel options 22 1.53 lukem # for this architecture, see the options(4) man page. For an explanation 23 1.53 lukem # of each device driver in this file see the section 4 man page for the 24 1.53 lukem # device. 25 1.40 jandberg 26 1.40 jandberg 27 1.9 is include "arch/amiga/conf/std.amiga" 28 1.9 is 29 1.50 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 30 1.50 atatat 31 1.61.2.7 skrll #ident "GENERIC-$Revision: 1.61.2.7 $" 32 1.53 lukem 33 1.25 mhitch 34 1.9 is maxusers 8 35 1.9 is options RTC_OFFSET=0 36 1.9 is 37 1.53 lukem # 38 1.53 lukem # mainboards to support (in addition to Amiga) 39 1.53 lukem # 40 1.9 is options BB060STUPIDROM # You need this, if you have a non-DraCo 41 1.39 lukem # MC68060 with an OS ROM up to (at least) 42 1.12 is # V40 (OS3.1) and want to boot with the 43 1.12 is # bootblock. 44 1.12 is # You do not need this if you have a DraCo, 45 1.12 is # have no 68060 or NEVER use the bootblock 46 1.39 lukem options P5PPC68KBOARD # Phase5 PPC/68K board support 47 1.53 lukem # 48 1.53 lukem # processors this kernel should support 49 1.53 lukem # 50 1.9 is options M68060 # support for 060 51 1.9 is options M060SP # MC68060 software support (Required for 060) 52 1.9 is options M68040 # support for 040 53 1.9 is options FPSP # MC68040 floating point support 54 1.9 is options M68030 # support for 030 55 1.9 is options M68020 # support for 020/851 56 1.9 is options FPU_EMULATE # FPU emulation 57 1.9 is 58 1.53 lukem # 59 1.53 lukem # Networking options 60 1.53 lukem # 61 1.9 is options INET # IP networking support (Required) 62 1.23 is options INET6 # IPV6 63 1.23 is #options IPSEC # IP security 64 1.23 is #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 65 1.23 is #options IPSEC_DEBUG # debug for IP security 66 1.9 is #options GATEWAY # Packet forwarding 67 1.9 is #options DIRECTED_BROADCAST # Broadcast across subnets 68 1.27 is 69 1.9 is #options MROUTING # Multicast routing 70 1.61.2.2 skrll #options PIM # Protocol Independent Multicast 71 1.9 is options NS # XNS 72 1.9 is #options NSIP # XNS tunneling over IP 73 1.9 is options ISO,TPIP # OSI 74 1.29 sommerfe #options EON # OSI tunneling over IP 75 1.9 is options CCITT,LLC,HDLC # X.25 76 1.9 is options NETATALK # AppleTalk networking protocols 77 1.37 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 78 1.27 is 79 1.9 is options PPP_BSDCOMP # BSD-Compress compression support for PPP 80 1.9 is options PPP_DEFLATE # Deflate compression support for PPP 81 1.9 is options PPP_FILTER # Active filter support for PPP (requires bpf) 82 1.9 is options PFIL_HOOKS # pfil(9) packet filter hooks 83 1.9 is options IPFILTER_LOG # ipmon(8) log support 84 1.56 provos #options IPFILTER_DEFAULT_BLOCK # block all packets by default 85 1.9 is 86 1.61.2.1 skrll #options ALTQ # Manipulate network interfaces' output queues 87 1.61.2.1 skrll #options ALTQ_BLUE # Stochastic Fair Blue 88 1.61.2.1 skrll #options ALTQ_CBQ # Class-Based Queueing 89 1.61.2.1 skrll #options ALTQ_CDNR # Diffserv Traffic Conditioner 90 1.61.2.1 skrll #options ALTQ_FIFOQ # First-In First-Out Queue 91 1.61.2.1 skrll #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 92 1.61.2.1 skrll #options ALTQ_HFSC # Hierarchical Fair Service Curve 93 1.61.2.1 skrll #options ALTQ_LOCALQ # Local queueing discipline 94 1.61.2.1 skrll #options ALTQ_PRIQ # Priority Queueing 95 1.61.2.1 skrll #options ALTQ_RED # Random Early Detection 96 1.61.2.1 skrll #options ALTQ_RIO # RED with IN/OUT 97 1.61.2.1 skrll #options ALTQ_WFQ # Weighted Fair Queueing 98 1.61.2.1 skrll 99 1.53 lukem # Filesystems 100 1.9 is file-system FFS # Berkeley fast file system 101 1.15 tron file-system EXT2FS # second extended file system (linux) 102 1.9 is #file-system LFS # log-structured filesystem (experimental) 103 1.27 is 104 1.9 is file-system MFS # Memory based filesystem 105 1.27 is 106 1.9 is file-system NFS # Network File System client side code 107 1.9 is file-system ADOSFS # AmigaDOS file system 108 1.9 is file-system CD9660 # ISO 9660 + Rock Ridge filesystem 109 1.9 is file-system MSDOSFS # MS-DOS filesystem 110 1.27 is 111 1.27 is file-system KERNFS # kernel data-structure filesystem 112 1.27 is 113 1.9 is file-system FDESC # user file descriptor filesystem 114 1.9 is file-system NULLFS # loopback filesystem 115 1.23 is file-system OVERLAY # overlay filesystem 116 1.9 is #file-system PORTAL # Portal filesystem 117 1.9 is file-system PROCFS # /proc filesystem 118 1.9 is file-system UMAPFS # NULLFS + uid and gid remapping 119 1.9 is file-system UNION # union filesystem 120 1.9 is 121 1.53 lukem # Filesystem options 122 1.27 is 123 1.27 is #options FFS_EI # FFS Endian Independant support 124 1.27 is 125 1.9 is options QUOTA # User and group quotas in FFS 126 1.39 lukem options SOFTDEP # FFS soft updates support. 127 1.61.2.7 skrll #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 128 1.15 tron options NFSSERVER # Network File System server side code 129 1.27 is 130 1.15 tron #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 131 1.15 tron # immutable) behave as system flags. 132 1.9 is 133 1.53 lukem # 134 1.53 lukem # Compatibility options for various existing systems 135 1.53 lukem # 136 1.9 is 137 1.37 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 138 1.9 is options COMPAT_43 # compatibility with 4.3BSD interfaces 139 1.9 is options COMPAT_09 # compatibility with NetBSD 0.9 140 1.9 is options COMPAT_10 # compatibility with NetBSD 1.0 141 1.9 is options COMPAT_12 # compatibility with NetBSD 1.2 142 1.9 is options COMPAT_13 # compatibility with NetBSD 1.3 143 1.21 augustss options COMPAT_14 # compatibility with NetBSD 1.4 144 1.61.2.1 skrll options COMPAT_15 # compatibility with NetBSD 1.5 145 1.61.2.1 skrll options COMPAT_16 # compatibility with NetBSD 1.6 146 1.10 is options COMPAT_SUNOS # Support to run Sun (m68k) executables 147 1.15 tron options COMPAT_SVR4 # Support to run SVR4 (m68k) executables 148 1.9 is options COMPAT_NOMID # allow nonvalid machine id executables 149 1.10 is #options COMPAT_LINUX # Support to run Linux/m68k executables 150 1.45 is 151 1.45 is options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x) 152 1.46 is options COMPAT_AOUT_M68K # actually make some system calls work. 153 1.61.2.4 skrll options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 154 1.9 is 155 1.53 lukem # 156 1.53 lukem # Support for System V IPC facilities. 157 1.53 lukem # 158 1.9 is options SYSVSHM # System V-like shared memory 159 1.9 is options SYSVMSG # System V-like messages 160 1.9 is options SYSVSEM # System V-like semaphores 161 1.39 lukem #options SEMMNI=10 # number of semaphore identifiers 162 1.39 lukem #options SEMMNS=60 # number of semaphores in system 163 1.39 lukem #options SEMUME=10 # max number of undo entries per process 164 1.39 lukem #options SEMMNU=30 # number of undo structures in system 165 1.61.2.1 skrll options P1003_1B_SEMAPHORE # p1003.1b semaphore support 166 1.9 is 167 1.53 lukem # 168 1.53 lukem # Support for various kernel options 169 1.53 lukem # 170 1.9 is 171 1.9 is options KTRACE # system call tracing support 172 1.56 provos options SYSTRACE # system call vetting via systrace(1) 173 1.9 is options LKM # Loadable kernel modules 174 1.42 jdolecek #options INSECURE # disable kernel security levels 175 1.42 jdolecek options SCSIVERBOSE # human readable SCSI error messages 176 1.55 lukem options USERCONF # userconf(4) support 177 1.9 is options NTP # NTP phase/frequency locked loop 178 1.53 lukem #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 179 1.58 wiz 180 1.58 wiz # Enable experimental buffer queue strategy for better responsiveness under 181 1.58 wiz # high disk I/O load. Use it with caution - it's not proven to be stable yet. 182 1.58 wiz #options NEW_BUFQ_STRATEGY 183 1.9 is 184 1.53 lukem # 185 1.53 lukem # Misc. debugging options 186 1.53 lukem # 187 1.9 is options DDB # Kernel debugger 188 1.9 is #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 189 1.9 is options DIAGNOSTIC # Extra kernel sanity checks 190 1.9 is #options DEBUG # Enable misc. kernel debugging code 191 1.9 is #options SYSCALL_DEBUG # debug all syscalls. 192 1.9 is #options SCSIDEBUG # Add SCSI debugging statements 193 1.51 thorpej #options PANICBUTTON # Forced crash via keypress (?) 194 1.9 is 195 1.53 lukem # 196 1.53 lukem # Amiga specific options 197 1.53 lukem # 198 1.10 is #options LIMITMEM=24 # Do not use more than LIMITMEM MB of the 199 1.12 is # first bank of RAM. (default: unlimited) 200 1.39 lukem #options NKPTADD=4 # set this for 4 additional KPT pages 201 1.39 lukem #options NKPTADDSHIFT=24 # set this for 1 additional KPT page 202 1.12 is # per 16 MB (1<<24 bytes) of RAM 203 1.42 jdolecek # uncomment and decrease this, or uncomment and 204 1.39 lukem # increase NKPTADD if you get "out of PT pages" 205 1.39 lukem # panics. 206 1.12 is 207 1.53 lukem # ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete 208 1.53 lukem # before the 10 secondinterval ends, or that KBDRESET does work at all. 209 1.9 is #options KBDRESET # sync on Ctrl-Amiga-Amiga 210 1.9 is 211 1.53 lukem # These options improve performance with the built-in serial port 212 1.53 lukem # on slower Amigas. Try the larger buffers first then lev6_defer. 213 1.9 is #options SERIBUF_SIZE=4096 214 1.9 is #options SEROBUF_SIZE=32 215 1.9 is #options LEV6_DEFER # defers l6 to l4 (below serial l5) 216 1.61 is 217 1.61 is #options DEVRELOAD # implement /dev/reload 218 1.61 is # # currently only works for a.out kernels 219 1.9 is 220 1.9 is options RETINACONSOLE # enable code to allow retina to be console 221 1.9 is options ULOWELLCONSOLE # enable code to allow a2410 to be console 222 1.9 is options CL5426CONSOLE # Cirrus console 223 1.9 is options CV64CONSOLE # CyberVision console 224 1.9 is options TSENGCONSOLE # Tseng console 225 1.9 is options CV3DCONSOLE # CyberVision 64/3D console 226 1.9 is 227 1.9 is options GRF_ECS # Enhanced Chip Set 228 1.9 is options GRF_NTSC # NTSC 229 1.9 is options GRF_PAL # PAL 230 1.9 is options GRF_A2024 # Support for the A2024 231 1.9 is options GRF_AGA # AGA Chip Set 232 1.12 is options GRF_AGA_VGA # AGA VGAONLY timing 233 1.9 is options GRF_SUPER72 # AGA Super-72 234 1.9 is #options KFONT_8X11 # 8x11 font 235 1.9 is 236 1.53 lukem # select a font for the console according to the character set and keymap 237 1.53 lukem # you want to use 238 1.49 heinz options KFONT_CONS_ISO8859_1 239 1.49 heinz #options KFONT_CONS_ISO8859_2 240 1.49 heinz 241 1.53 lukem # This is how you would tell the kernel the A2410 oscillator frequencies: 242 1.53 lukem # The used frequencies are the defaults, and do not need option setting 243 1.9 is #options ULOWELL_OSC1=36000000 244 1.9 is #options ULOWELL_OSC2=66667000 245 1.9 is 246 1.53 lukem # This is how you specify the blitting speed, higher values may speed up blits 247 1.53 lukem # a littel bit. If you raise this value too much some trash may appear. 248 1.53 lukem # the commented version is the default. 249 1.9 is #options RH_MEMCLK=61000000 250 1.53 lukem # this option enables the 64 bit sprite which does not work 251 1.53 lukem # for quite a few people. E.g. The cursor sprite will turn to a block 252 1.53 lukem # when moved to the top of the screen in X. 253 1.9 is #options RH_64BIT_SPRITE 254 1.53 lukem # enables fast scroll code appears to now work on 040 systems. 255 1.9 is #options RETINA_SPEED_HACK 256 1.53 lukem # enables the Hardwarecursor which does not work on some systems. 257 1.9 is #options RH_HARDWARECURSOR 258 1.9 is 259 1.53 lukem # wscons aware interface to amiga custom chips. 260 1.53 lukem # If you enable it enable also wskbd. 261 1.53 lukem # 262 1.35 is 263 1.35 is #amidisplaycc0 at mainbus0 # wscons interface to custom chips 264 1.35 is #wsdisplay0 at amidisplaycc0 console ? 265 1.53 lukem #options WSEMUL_VT100 266 1.53 lukem #options FONT_VT220L8x10 267 1.61.2.1 skrll #options FONT_VT220ISO8x16 268 1.35 is 269 1.9 is grfcc0 at mainbus0 # custom chips 270 1.9 is grfrt0 at zbus0 # retina II 271 1.9 is grfrh0 at zbus0 # retina III 272 1.49 heinz grfcl* at zbus0 # Picasso II/Piccolo/Spectrum 273 1.9 is grful0 at zbus0 # A2410 274 1.9 is grfcv0 at zbus0 # CyberVision 64 275 1.9 is grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin) 276 1.9 is grfcv3d0 at zbus0 # CyberVision 64/3D 277 1.9 is 278 1.9 is grf0 at grfcc0 279 1.9 is grf1 at grfrt0 280 1.9 is grf2 at grfrh0 281 1.9 is grf3 at grfcl? 282 1.9 is grf4 at grful0 283 1.9 is grf5 at grfcv0 284 1.9 is grf6 at grfet? 285 1.9 is grf7 at grfcv3d0 286 1.10 is ite0 at grf0 # terminal emulators for grfs 287 1.10 is ite1 at grf1 # terminal emulators for grfs 288 1.10 is ite2 at grf2 # terminal emulators for grfs 289 1.10 is ite3 at grf3 # terminal emulators for grfs 290 1.10 is ite4 at grf4 # terminal emulators for grfs 291 1.10 is ite5 at grf5 # terminal emulators for grfs 292 1.10 is ite6 at grf6 # terminal emulators for grfs 293 1.10 is ite7 at grf7 # terminal emulators for grfs 294 1.9 is 295 1.9 is msc0 at zbus0 # A2232 MSC multiport serial. 296 1.9 is mfc0 at zbus0 # MultiFaceCard I/O board 297 1.9 is mfcs0 at mfc0 unit 0 # MFC serial 298 1.9 is mfcs1 at mfc0 unit 1 # MFC serial 299 1.9 is #mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] 300 1.9 is #mfc1 at zbus0 # MultiFaceCard 2nd I/O board 301 1.9 is #mfcs2 at mfc1 unit 0 302 1.9 is #mfcs3 at mfc1 unit 1 303 1.9 is #mfcp1 at mfc1 unit 0 304 1.9 is 305 1.16 is hyper* at zbus? # zbus HyperCom3/3+/4/4+ 306 1.9 is #hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3 307 1.9 is com* at hyper? port ? # Hypercom3/4 serial ports 308 1.16 is lpt* at hyper? port ? # Hypercom3+/4+ parallel port 309 1.9 is 310 1.39 lukem #options IOBZCLOCK=22118400 # default, uncomment the next line 311 1.39 lukem #options IOBZCLOCK=24000000 # if needed. 312 1.35 is 313 1.35 is iobl* at zbus? # zbus IOBlix 314 1.35 is com* at iobl? port ? # IOBlix serial ports 315 1.35 is lpt* at iobl? port ? # IOBlix parallel ports 316 1.35 is 317 1.53 lukem 318 1.53 lukem # 319 1.53 lukem # Keyboard device. Optionally can attach a wskbd. 320 1.53 lukem # wskbd works together with a wsdisplay so enable them both if you will. 321 1.53 lukem # Don't enable wskbd if you use ite. 322 1.50 atatat # 323 1.53 lukem # XXX in std.amiga: kbd0 at mainbus0 324 1.53 lukem 325 1.35 is #wskbd0 at kbd0 console ? 326 1.27 is 327 1.53 lukem 328 1.53 lukem # 329 1.53 lukem # Amiga Mainboard devices (sans graphics and keyboard) 330 1.53 lukem # 331 1.9 is 332 1.9 is ser0 at mainbus0 # Amiga onboard serial 333 1.9 is par0 at mainbus0 # Amiga onboard parallel 334 1.9 is ms* at mainbus0 # Amiga mice 335 1.9 is fdc0 at mainbus0 # Amiga FDC 336 1.9 is fd* at fdc0 unit ? # floppy disks on the later 337 1.9 is a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock 338 1.9 is a2kbbc0 at mainbus0 # A2000 battery backed clock 339 1.9 is aucc* at mainbus0 # Amiga CC audio 340 1.9 is audio* at aucc? 341 1.9 is 342 1.9 is 343 1.61.2.1 skrll #wsmouse* at ms? 344 1.61.2.1 skrll 345 1.61.2.1 skrll 346 1.53 lukem # 347 1.53 lukem # Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics) 348 1.53 lukem # 349 1.53 lukem 350 1.53 lukem # Alas, Melody-Z2 dont configure in the DraCo bus. 351 1.9 is melody* at zbus0 # Melody MPEG audio decoder 352 1.9 is audio* at melody? 353 1.38 is 354 1.38 is repulse* at zbus0 # ALiENDESiGN Repulse 355 1.38 is audio* at repulse? 356 1.43 is 357 1.43 is toccata* at zbus0 # MacroSystem GmbH Toccata 358 1.43 is audio* at toccata? 359 1.9 is 360 1.53 lukem # Ethernet cards: 361 1.9 is le* at zbus0 # A2065, Ameristar, Ariadne 362 1.33 is ne* at zbus0 # AriadneII, X-surf 363 1.17 is ed* at zbus0 # Hydra, ASDG LanRover 364 1.17 is es* at zbus0 # CEI A4066 EthernetPLUS 365 1.17 is qn* at zbus0 # Quicknet 366 1.9 is 367 1.53 lukem # Arcnet 368 1.9 is bah* at zbus0 # C=/Ameristar A2060 / 560 369 1.9 is 370 1.53 lukem # Greater Valley Product Bus 371 1.9 is gvpbus* at zbus0 372 1.9 is 373 1.53 lukem # scsi stuff, all possible 374 1.9 is gtsc0 at gvpbus? # GVP series II scsi 375 1.9 is scsibus* at gtsc0 376 1.9 is ahsc0 at mainbus0 # A3000 scsi 377 1.9 is scsibus* at ahsc0 378 1.9 is atzsc0 at zbus0 # A2091 scsi 379 1.9 is scsibus* at atzsc0 380 1.9 is wstsc0 at zbus0 # Wordsync II scsi 381 1.9 is scsibus* at wstsc0 382 1.9 is ivsc0 at zbus0 # IVS scsi 383 1.9 is scsibus* at ivsc0 384 1.9 is mlhsc0 at zbus0 # Hacker scsi 385 1.9 is scsibus* at mlhsc0 386 1.9 is otgsc0 at zbus0 # 12 gauge scsi 387 1.9 is scsibus* at otgsc0 388 1.9 is zssc0 at zbus0 # Zeus scsi 389 1.9 is scsibus* at zssc0 390 1.9 is mgnsc0 at zbus0 # Magnum scsi 391 1.9 is scsibus* at mgnsc0 392 1.9 is wesc0 at zbus0 # Warp Engine scsi 393 1.9 is scsibus* at wesc0 394 1.9 is afsc0 at zbus0 # A4091 scsi 395 1.9 is scsibus* at afsc0 396 1.9 is aftsc0 at mainbus0 # A4000T scsi 397 1.9 is scsibus* at aftsc0 398 1.9 is flsc0 at zbus0 # FastlaneZ3 scsi 399 1.9 is scsibus* at flsc0 400 1.39 lukem bzsc0 at zbus0 # Blizzard 1230 I,II scsi 401 1.9 is scsibus* at bzsc0 402 1.39 lukem bzivsc0 at zbus0 # Blizzard 12x0 IV scsi 403 1.9 is scsibus* at bzivsc0 404 1.9 is bztzsc0 at zbus0 # Blizzard 2060 scsi 405 1.9 is scsibus* at bztzsc0 406 1.9 is cbsc0 at zbus0 # CyberSCSI I 407 1.9 is scsibus* at cbsc0 408 1.9 is cbiisc0 at zbus0 # CyberSCSI II 409 1.9 is scsibus* at cbiisc0 410 1.10 is cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI 411 1.10 is scsibus* at cbiiisc0 412 1.9 is empsc0 at zbus0 # Emplant scsi 413 1.9 is scsibus* at empsc0 414 1.25 mhitch 415 1.34 is wdc0 at mainbus0 # A4000 & A1200 IDE bus 416 1.61.2.1 skrll atabus* at wdc? channel ? # ATA bus 417 1.61.2.1 skrll wd* at atabus? drive ? # + drives 418 1.61.2.1 skrll atapibus* at atabus? # ATAPI bus 419 1.34 is cd* at atapibus? drive ? # ATAPI CD-ROM drives 420 1.34 is sd* at atapibus? drive ? # ATAPI disk drives 421 1.34 is 422 1.34 is pccard0 at mainbus0 423 1.34 is pcmcia* at pccard0 424 1.34 is com* at pcmcia? function ? # Modems and serial cards 425 1.34 is pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 426 1.34 is aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 427 1.34 is wdc* at pcmcia? function ? 428 1.34 is awi* at pcmcia? function ? # BayStack 650 (802.11FH) 429 1.34 is ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 430 1.34 is mbe* at pcmcia? function ? # MB8696x based Ethernet 431 1.34 is ne* at pcmcia? function ? # NE2000-compatible Ethernet 432 1.34 is sm* at pcmcia? function ? # Megahertz Ethernet 433 1.39 lukem mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards 434 1.34 is com* at mhzc? 435 1.34 is sm* at mhzc? 436 1.9 is 437 1.53 lukem 438 1.53 lukem 439 1.53 lukem 440 1.53 lukem # each hard drive from low target to high 441 1.53 lukem # will configure to the next available sd unit number 442 1.9 is sd* at scsibus? target ? lun ? # scsi disks 443 1.9 is st* at scsibus? target ? lun ? # scsi tapes 444 1.10 is cd* at scsibus? target ? lun ? # scsi cds 445 1.29 sommerfe ch* at scsibus? target ? lun ? # scsi autochangers 446 1.9 is ss* at scsibus? target ? lun ? # scsi scanner 447 1.9 is uk* at scsibus? target ? lun ? # scsi unknown 448 1.9 is 449 1.9 is pseudo-device loop # loopback network interface 450 1.9 is pseudo-device sl 1 # SLIP network interfaces 451 1.9 is pseudo-device ppp 1 # PPP network interfaces 452 1.40 jandberg pseudo-device pppoe # PPP over Ethernet (RFC 2516) 453 1.9 is pseudo-device tun 1 # network tunnel line discipline 454 1.61.2.6 skrll pseudo-device tap # virtual Ethernet 455 1.9 is #pseudo-device gre 2 # generic L3 over IP tunnel 456 1.9 is pseudo-device bpfilter 16 # Berkeley packet filter 457 1.9 is pseudo-device ipfilter # IP Filter package 458 1.23 is pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 459 1.23 is #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 460 1.29 sommerfe #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 461 1.33 is pseudo-device vlan # IEEE 802.1q encapsulation 462 1.40 jandberg pseudo-device bridge # simple inter-network bridging 463 1.59 perseant #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 464 1.61.2.1 skrll #pseudo-device pf # PF packet filter 465 1.61.2.1 skrll #pseudo-device pflog # PF log if 466 1.61.2.7 skrll #pseudo-device fss 4 # file system snapshot device 467 1.9 is 468 1.19 is pseudo-device view 4 # views (needed for grfcc) 469 1.31 jdolecek pseudo-device pty # pseudo-terminals 470 1.52 lukem pseudo-device clockctl # user control of clock subsystem 471 1.9 is 472 1.61.2.1 skrll #pseudo-device wsfont # wsfont(4) dynamic font loading support 473 1.61.2.1 skrll 474 1.9 is pseudo-device vnd 4 # vnode pseudo-disks 475 1.9 is pseudo-device ccd 4 # concatenated disk devices 476 1.57 elric #pseudo-device cgd 4 # cryptographic disk devices 477 1.42 jdolecek pseudo-device raid 8 # RAIDframe disk driver 478 1.42 jdolecek options RAID_AUTOCONFIG # auto-configuration of RAID components 479 1.53 lukem # Options to enable various other RAIDframe RAID types. 480 1.53 lukem # options RF_INCLUDE_EVENODD=1 481 1.53 lukem # options RF_INCLUDE_RAID5_RS=1 482 1.53 lukem # options RF_INCLUDE_PARITYLOGGING=1 483 1.53 lukem # options RF_INCLUDE_CHAINDECLUSTER=1 484 1.53 lukem # options RF_INCLUDE_INTERDECLUSTER=1 485 1.53 lukem # options RF_INCLUDE_PARITY_DECLUSTERING=1 486 1.53 lukem # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 487 1.9 is 488 1.39 lukem pseudo-device rnd # /dev/random and in-kernel generator 489 1.39 lukem #options RND_COM # use "com" randomness as well (BROKEN) 490 1.9 is 491 1.61.2.1 skrll pseudo-device ksyms # /dev/ksyms (kernel symbols) 492 1.61.2.1 skrll 493 1.9 is config netbsd root on ? type ? 494
Indexes created Sat Nov 01 21:09:44 GMT 2025