xref: /src/sys/arch/evbarm/smdk2xx0/smdk2410_start.S

/*	$NetBSD: smdk2410_start.S,v 1.4 2003/08/29 12:41:12 bsh Exp $ */

/*
 * Copyright (c) 2002, 2003 Fujitsu Component Limited
 * Copyright (c) 2002, 2003 Genetec Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of The Fujitsu Component Limited nor the name of
 *    Genetec corporation may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY FUJITSU COMPONENT LIMITED AND GENETEC
 * CORPORATION ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL FUJITSU COMPONENT LIMITED OR GENETEC
 * CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <machine/asm.h>
#include <arm/armreg.h>
#include <arm/arm32/pte.h>
#include <arm/arm32/pmap.h>		/* for PMAP_DOMAIN_KERNEL */

#include <arm/s3c2xx0/s3c2410reg.h>	/* for S3C2410_SDRAM_START */
#include "opt_smdk2xx0.h"		/* SMDK2XX0_CLOCK_CONFIG */

/*
 * Kernel start routine for Samsung SMDK2410.
 * This code is excuted at the very first after the kernel is loaded
 * by boot program.
 */
	.text

#ifndef	SDRAM_START
#define	SDRAM_START	S3C2410_SDRAM_START
#endif
#define KERNEL_TEXT_ADDR	(SDRAM_START+0x00200000)

	.global	_C_LABEL(smdk2410_start)
_C_LABEL(smdk2410_start):
	/* Disable interrupt */
	mrs	r0, cpsr
	orr	r0, r0, #I32_bit
	msr	cpsr, r0

#ifdef SMDK2XX0_CLOCK_CONFIG
	adr	r4, clock_config_data

	mov	r2, #S3C2410_CLKMAN_BASE
	ldr	r1, [r2, #CLKMAN_CLKSLOW]
	orr	r0, r1, #CLKSLOW_SLOW
	str	r0, [r2, #CLKMAN_CLKSLOW]
	nop
	nop

	ldmia	r4, {r0,r3}
	str	r0, [r2, #CLKMAN_CLKDIVN]

	str	r3, [r2, #CLKMAN_MPLLCON]
	nop
	nop

	str	r1, [r2, #CLKMAN_CLKSLOW]
#endif

	/* Are we running on right place ? */
	adr r0, _C_LABEL(smdk2410_start)
	ldr	r2, =KERNEL_TEXT_ADDR
	cmp	r0, r2
	beq	smdk2410_start_ram

	/*
	 * move me to RAM
	 */
	ldr r1, Lcopy_size
	adr r0, _C_LABEL(smdk2410_start)
	add r1, r1, #3
	mov r1, r1, LSR #2
	mov r4, r2

	cmp r0, r2
	bhs 5f

	/* src < dest. copy from top */
	add r0,r0,r1,LSL #2
	add r2,r2,r1,LSL #2

3:	ldr r3,[r0,#-4]!
	str r3,[r2,#-4]!
	subs r1,r1,#1
	bhi 3b
	b 7f

	/* src >= dest. copy from bottom */
5:	ldr r3,[r0],#4
	str r3,[r2],#4
	subs r1,r1,#1
	bhi 5b

7:
	/* Jump to RAM */
	ldr r0, Lstart_off
	add pc, r4, r0

Lcopy_size:	.word _edata-_C_LABEL(smdk2410_start)
Lstart_off:	.word smdk2410_start_ram-_C_LABEL(smdk2410_start)

smdk2410_start_ram:
	/*
	 *  Kernel is loaded in SDRAM (0x30200000..), and is expected to run
	 *  in VA 0xc0200000..
	 */

	/* Disable MMU for a while */
	mrc	p15, 0, r2, c1, c0, 0
	bic	r2, r2, #CPU_CONTROL_MMU_ENABLE
	mcr	p15, 0, r2, c1, c0, 0

	nop
	nop
	nop

	mov	r0,#SDRAM_START      /* pagetable */
	adr	r4, mmu_init_table
	b	2f
1:
	str	r3, [r0, r2]
	add	r2, r2, #4
	add	r3, r3, #(L1_S_SIZE)
	adds	r1, r1, #-1
	bhi	1b
2:
	ldmia	r4!, {r1,r2,r3}   /* # of sections, PA|attr, VA */
	cmp	r1, #0
	bne	1b

	mcr	p15, 0, r0, c2, c0, 0	/* Set TTB */
	mcr	p15, 0, r0, c8, c7, 0	/* Flush TLB */

	/* Set the Domain Access register.  Very important! */
	mov	r0, #((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT)
	mcr	p15, 0, r0, c3, c0, 0

	/* Enable MMU */
	mrc	p15, 0, r0, c1, c0, 0
	orr	r0, r0, #CPU_CONTROL_MMU_ENABLE
	mcr	p15, 0, r0, c1, c0, 0

	nop
	nop
	nop

	/* Jump to kernel code in TRUE VA */
	adr	r0, Lstart
	ldr	pc, [r0]

Lstart:
	.word	start

	.macro clock_data  hdivn, pdivn, mdiv, pdiv, sdiv
	.word	(\hdivn)<<1 | \pdivn
	.word	(\mdiv)<<PLLCON_MDIV_SHIFT | (\pdiv)<<PLLCON_PDIV_SHIFT | (\sdiv)<<PLLCON_SDIV_SHIFT
	.endm
#ifdef	SMDK2XX0_CLOCK_CONFIG
clock_config_data:
	clock_data SMDK2XX0_CLOCK_CONFIG
#endif

#define MMU_INIT(va,pa,n_sec,attr) \
	.word	n_sec					    ; \
	.word	4*((va)>>L1_S_SHIFT)			    ; \
	.word	(pa)|(attr)				    ;

mmu_init_table:
	/* fill all table VA==PA */
	MMU_INIT(0x00000000, 0x00000000, 1<<(32-L1_S_SHIFT), L1_TYPE_S|L1_S_AP(AP_KRW))
	/* map SDRAM VA==PA, WT cacheable */
	MMU_INIT(SDRAM_START, SDRAM_START, 64, L1_TYPE_S|L1_S_C|L1_S_AP(AP_KRW))
	/* map VA 0xc0000000..0xc3ffffff to PA 0x30000000..0x33ffffff */
	MMU_INIT(0xc0000000, SDRAM_START, 64, L1_TYPE_S|L1_S_C|L1_S_AP(AP_KRW))

	.word 0	/* end of table */