LIBERO revision 1.3
1# 	$NetBSD: LIBERO,v 1.3 2000/02/12 03:34:41 thorpej Exp $
2
3#	NEWS1750 config file;
4#
5#	"The far way to the eventual news68k port"
6#
7include		"arch/news68k/conf/std.news68k"
8
9maxusers	8
10
11options 	news1700		# news1[4567]00 support
12options 	CPU_SINGLE		# Will IOP be supported eventually?
13#options 	FPU_EMULATE
14
15# Standard system options
16options 	NTP			# NTP phase/frequency locked loop
17options 	KTRACE			# system call tracing support
18options 	SYSVMSG			# System V message queues
19options 	SYSVSEM			# System V semaphores
20options 	SYSVSHM			# System V shared memory
21#optoins 	SHMMAXPGS=1024		# 1024 pages is the default
22options 	LKM			# loadable kernel modules
23#options 	UCONSOLE		# users can redirect console (unsafe)
24
25# Debugging options
26options 	DDB			# kernel dynamic debugger
27#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
28#options 	DEBUG			# extra kernel debugging support
29options 	DIAGNOSTIC		# extra kernel sanity checking
30options 	SCSIVERBOSE		# Verbose SCSI errors
31#options 	SCSIDEBUG		#
32
33# Compatibility options
34options 	COMPAT_43		# compatibility with 4.3BSD binaries
35options 	COMPAT_13		# NetBSD 1.3 binary compatibility
36options 	COMPAT_14		# NetBSD 1.4 binary compatibility
37#options 	TCP_COMPAT_42		# compatibility with 4.2BSD TCP/IP
38
39# Filesystem options
40file-system	FFS		# Berkeley Fast Filesystem
41file-system	NFS		# Sun NFS-compatible filesystem client
42file-system	MFS		# memory-based filesystem
43file-system	CD9660		# ISO 9660 + Rock Ridge file system
44file-system	MSDOSFS		# MS-DOS FAT file system
45file-system	KERNFS		# /kern
46file-system	PROCFS		# /proc
47file-system	FDESC		# /dev/fd/*
48#file-system	NULLFS		# loopback file system
49#file-system	UNION		# union file system 
50
51options 	NFSSERVER	# nfs server support
52#options 	QUOTA		# ffs quotas
53#options 	FFS_EI		# ffs endian independant support
54options 	SOFTDEP		# ffs soft updates support
55
56# Pull in config fragments for kernel crypto. This is required for
57# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
58# one of these, based on whether you use crypto-us or crypto-intl, and
59# adjust the prefixes as necessary.
60
61#prefix ../crypto-us/sys
62#cinclude "conf/files.crypto-us"
63#prefix
64
65#prefix ../crypto-intl/sys
66#cinclude "conf/files.crypto-intl"
67#prefix
68
69# Networking options
70options 	INET		# Internet protocols
71options 	INET6		# IPv6
72#options 	IPSEC		# IP security
73#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
74#options 	IPSEC_DEBUG	# debug for IP security
75#options 	GATEWAY		# IP packet forwarding
76#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
77#options 	IPFILTER_LOG	# ipmon(8) log support
78options 	NFS_BOOT_BOOTPARAM
79
80config	netbsd root on ? type ?
81#config	netbsd root on ? type nfs
82
83#
84# device declarations
85#
86
87mainbus0 at root
88
89# NEWS HYPER-BUS
90hb0	at mainbus0 systype NEWS1700
91
92# MK48T02 realtime clock
93clock0	at hb0 addr 0xe0d807f8 ipl 6
94
95# onboard LANCE ethernet
96le0	at hb0 addr 0xe0f00000 ipl 4
97
98# keyboard/mouse; not yet
99#kb0	at hb0 addr 0xe0d00000 ipl 5
100#ms0	at hb0 addr 0xe0d00005 ipl 5
101
102# onboard z8530 SCC
103zsc0	at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0
104zstty0	at zsc0 channel 0
105zstty1	at zsc0 channel 1 
106
107# Frame buffer devices; not yet
108#fb0	at hb0 addr 0xf0700000			# NWB225
109#fb1	at hb0 addr 0xf0f00000			# NWB512
110
111# onboard uPD72067 FDC; not yet
112#fdc0	at hb0 addr 0xe0c80000 ipl 3
113#fd*	at fdc0
114
115# onboard CXD1180 SCSI controller
116#
117# This driver has several flags which may be enabled using
118# the "flags" directive.  Valid flags are:
119#
120# 0x000ff	Set (1<<target) to disable disconnect/reselect
121# 0x0ff00	Set (1<<(target+8)) to disable parity checking
122# 0x10000	Set this bit to disable DMA interrupts (poll)
123# 0x20000	Set this bit to disable DMA entirely (use PIO)
124#
125# For example: "flags 0x1000f" would disable DMA interrupts,
126# and disable disconnect/reselect for targets 0-3
127#
128si0	at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
129scsibus* at si0	
130
131sd*	at scsibus? target ? lun ?		# SCSI disks
132st*	at scsibus? target ? lun ?		# SCSI tapes
133cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
134#ch*	at scsibus? target ? lun ?		# SCSI changer devices
135#ss*	at scsibus? target ? lun ?		# SCSI scanners
136#uk*	at scsibus? target ? lun ?		# unknown SCSI devices
137
138# Misc.
139pseudo-device	loop			# loopback interface; required
140pseudo-device	pty		32	# pseudo-terminals
141pseudo-device	md		1	# memory disk device
142pseudo-device	vnd		4	# disk-like interface to files
143#pseudo-device	ccd		4	# concatenated and striped disks
144#pseudo-device	raid		4	# RAIDframe disk driver
145#pseudo-device	sl		2	# SLIP interfaces
146pseudo-device	ppp		2	# PPP interfaces
147#pseudo-device	tun		4	# Network "tunnel" device
148#pseudo-device	gre		2	# generic L3 over IP tunnel
149pseudo-device	bpfilter	16	# Berkeley Packet Filter
150pseudo-device	ipfilter		# ip filter
151#pseudo-device	strip		1	# Starmode Radio IP (Metricom)
152#pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)
153pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
154#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
155pseudo-device	rnd			# /dev/random and in-kernle generator
156