job.h revision 1.20
1/*	$NetBSD: job.h,v 1.20 2003/08/07 11:14:52 agc Exp $	*/
2
3/*
4 * Copyright (c) 1988, 1989, 1990 The Regents of the University of California.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to Berkeley by
8 * Adam de Boor.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 *    notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 *    notice, this list of conditions and the following disclaimer in the
17 *    documentation and/or other materials provided with the distribution.
18 * 3. Neither the name of the University nor the names of its contributors
19 *    may be used to endorse or promote products derived from this software
20 *    without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 * SUCH DAMAGE.
33 *
34 *	from: @(#)job.h	8.1 (Berkeley) 6/6/93
35 */
36
37/*
38 * Copyright (c) 1988, 1989 by Adam de Boor
39 * Copyright (c) 1989 by Berkeley Softworks
40 * All rights reserved.
41 *
42 * This code is derived from software contributed to Berkeley by
43 * Adam de Boor.
44 *
45 * Redistribution and use in source and binary forms, with or without
46 * modification, are permitted provided that the following conditions
47 * are met:
48 * 1. Redistributions of source code must retain the above copyright
49 *    notice, this list of conditions and the following disclaimer.
50 * 2. Redistributions in binary form must reproduce the above copyright
51 *    notice, this list of conditions and the following disclaimer in the
52 *    documentation and/or other materials provided with the distribution.
53 * 3. All advertising materials mentioning features or use of this software
54 *    must display the following acknowledgement:
55 *	This product includes software developed by the University of
56 *	California, Berkeley and its contributors.
57 * 4. Neither the name of the University nor the names of its contributors
58 *    may be used to endorse or promote products derived from this software
59 *    without specific prior written permission.
60 *
61 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
62 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
63 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
64 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
65 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
66 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
67 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
68 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
69 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
70 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
71 * SUCH DAMAGE.
72 *
73 *	from: @(#)job.h	8.1 (Berkeley) 6/6/93
74 */
75
76/*-
77 * job.h --
78 *	Definitions pertaining to the running of jobs in parallel mode.
79 *	Exported from job.c for the use of remote-execution modules.
80 */
81#ifndef _JOB_H_
82#define _JOB_H_
83
84#define TMPPAT	"/tmp/makeXXXXXX"
85
86#ifdef USE_SELECT
87/*
88 * Emulate poll() in terms of select().  This is not a complete
89 * emulation but it is sufficient for make's purposes.
90 */
91
92#define poll emul_poll
93#define pollfd emul_pollfd
94
95struct emul_pollfd {
96    int fd;
97    short events;
98    short revents;
99};
100
101#define	POLLIN		0x0001
102#define	POLLOUT		0x0004
103
104int
105emul_poll(struct pollfd *fd, int nfd, int timeout);
106#endif
107
108/*
109 * The POLL_MSEC constant determines the maximum number of milliseconds spent
110 * in poll before coming out to see if a child has finished.
111 */
112#define POLL_MSEC	5000
113
114
115/*-
116 * Job Table definitions.
117 *
118 * Each job has several things associated with it:
119 *	1) The process id of the child shell
120 *	2) The graph node describing the target being made by this job
121 *	3) A LstNode for the first command to be saved after the job
122 *	   completes. This is NILLNODE if there was no "..." in the job's
123 *	   commands.
124 *	4) An FILE* for writing out the commands. This is only
125 *	   used before the job is actually started.
126 *	5) A union of things used for handling the shell's output. Different
127 *	   parts of the union are used based on the value of the usePipes
128 *	   flag. If it is true, the output is being caught via a pipe and
129 *	   the descriptors of our pipe, an array in which output is line
130 *	   buffered and the current position in that buffer are all
131 *	   maintained for each job. If, on the other hand, usePipes is false,
132 *	   the output is routed to a temporary file and all that is kept
133 *	   is the name of the file and the descriptor open to the file.
134 *	6) An identifier provided by and for the exclusive use of the
135 *	   Rmt module.
136 *	7) A word of flags which determine how the module handles errors,
137 *	   echoing, etc. for the job
138 *
139 * The job "table" is kept as a linked Lst in 'jobs', with the number of
140 * active jobs maintained in the 'nJobs' variable. At no time will this
141 * exceed the value of 'maxJobs', initialized by the Job_Init function.
142 *
143 * When a job is finished, the Make_Update function is called on each of the
144 * parents of the node which was just remade. This takes care of the upward
145 * traversal of the dependency graph.
146 */
147#ifndef RMT_WILL_WATCH
148struct pollfd;
149#endif
150
151#define JOB_BUFSIZE	1024
152typedef struct Job {
153    int       	pid;	    /* The child's process ID */
154    GNode    	*node;      /* The target the child is making */
155    LstNode 	tailCmds;   /* The node of the first command to be
156			     * saved when the job has been run */
157    FILE 	*cmdFILE;   /* When creating the shell script, this is
158			     * where the commands go */
159    int    	rmtID;     /* ID returned from Rmt module */
160    short      	flags;	    /* Flags to control treatment of job */
161#define	JOB_IGNERR	0x001	/* Ignore non-zero exits */
162#define	JOB_SILENT	0x002	/* no output */
163#define JOB_SPECIAL	0x004	/* Target is a special one. i.e. run it locally
164				 * if we can't export it and maxLocal is 0 */
165#define JOB_IGNDOTS	0x008  	/* Ignore "..." lines when processing
166				 * commands */
167#define JOB_REMOTE	0x010	/* Job is running remotely */
168#define JOB_FIRST	0x020	/* Job is first job for the node */
169#define JOB_REMIGRATE	0x040	/* Job needs to be remigrated */
170#define JOB_RESTART	0x080	/* Job needs to be completely restarted */
171#define JOB_RESUME	0x100	/* Job needs to be resumed b/c it stopped,
172				 * for some reason */
173#define JOB_CONTINUING	0x200	/* We are in the process of resuming this job.
174				 * Used to avoid infinite recursion between
175				 * JobFinish and JobRestart */
176#define JOB_TRACED	0x400	/* we've sent 'set -x' */
177
178    union {
179	struct {
180	    int	  	op_inPipe;	/* Input side of pipe associated
181					 * with job's output channel */
182#ifndef RMT_WILL_WATCH
183	    struct pollfd *op_inPollfd;	/* pollfd associated with inPipe */
184#endif
185	    int   	op_outPipe;	/* Output side of pipe associated with
186					 * job's output channel */
187	    char  	op_outBuf[JOB_BUFSIZE + 1];
188	    	  	    	    	/* Buffer for storing the output of the
189					 * job, line by line */
190	    int   	op_curPos;	/* Current position in op_outBuf */
191	}   	    o_pipe;	    /* data used when catching the output via
192				     * a pipe */
193	struct {
194	    char  	of_outFile[sizeof(TMPPAT)+2];
195	    	  	    	    	/* Name of file to which shell output
196					 * was rerouted */
197	    int	    	of_outFd;	/* Stream open to the output
198					 * file. Used to funnel all
199					 * from a single job to one file
200					 * while still allowing
201					 * multiple shell invocations */
202	}   	    o_file;	    /* Data used when catching the output in
203				     * a temporary file */
204    }       	output;	    /* Data for tracking a shell's output */
205} Job;
206
207#define outPipe	  	output.o_pipe.op_outPipe
208#define inPipe	  	output.o_pipe.op_inPipe
209#define inPollfd	output.o_pipe.op_inPollfd
210#define outBuf		output.o_pipe.op_outBuf
211#define curPos		output.o_pipe.op_curPos
212#define outFile		output.o_file.of_outFile
213#define outFd	  	output.o_file.of_outFd
214
215
216/*-
217 * Shell Specifications:
218 * Each shell type has associated with it the following information:
219 *	1) The string which must match the last character of the shell name
220 *	   for the shell to be considered of this type. The longest match
221 *	   wins.
222 *	2) A command to issue to turn off echoing of command lines
223 *	3) A command to issue to turn echoing back on again
224 *	4) What the shell prints, and its length, when given the echo-off
225 *	   command. This line will not be printed when received from the shell
226 *	5) A boolean to tell if the shell has the ability to control
227 *	   error checking for individual commands.
228 *	6) The string to turn this checking on.
229 *	7) The string to turn it off.
230 *	8) The command-flag to give to cause the shell to start echoing
231 *	   commands right away.
232 *	9) The command-flag to cause the shell to Lib_Exit when an error is
233 *	   detected in one of the commands.
234 *
235 * Some special stuff goes on if a shell doesn't have error control. In such
236 * a case, errCheck becomes a printf template for echoing the command,
237 * should echoing be on and ignErr becomes another printf template for
238 * executing the command while ignoring the return status. If either of these
239 * strings is empty when hasErrCtl is FALSE, the command will be executed
240 * anyway as is and if it causes an error, so be it.
241 */
242typedef struct Shell {
243    const char	 *name;		/* the name of the shell. For Bourne and C
244				 * shells, this is used only to find the
245				 * shell description when used as the single
246				 * source of a .SHELL target. For user-defined
247				 * shells, this is the full path of the shell.
248				 */
249    Boolean 	  hasEchoCtl;	/* True if both echoOff and echoOn defined */
250    const char   *echoOff;	/* command to turn off echo */
251    const char   *echoOn;	/* command to turn it back on again */
252    const char   *noPrint;	/* command to skip when printing output from
253				 * shell. This is usually the command which
254				 * was executed to turn off echoing */
255    int           noPLen;	/* length of noPrint command */
256    Boolean	  hasErrCtl;	/* set if can control error checking for
257				 * individual commands */
258    const char	 *errCheck;	/* string to turn error checking on */
259    const char	 *ignErr;	/* string to turn off error checking */
260    /*
261     * command-line flags
262     */
263    const char   *echo;		/* echo commands */
264    const char   *exit;		/* exit on error */
265}               Shell;
266
267extern const char *shellPath;
268extern const char *shellName;
269
270extern int	job_pipe[2];	/* token pipe for jobs. */
271extern int	jobTokensRunning; /* tokens currently "out" */
272extern int	jobTokensFree;	/* tokens free but not yet released to pipe */
273
274#ifdef REMOTE
275extern char 	*targFmt;   	/* Format string for banner that separates
276				 * output from multiple jobs. Contains a
277				 * single %s where the name of the node being
278				 * made should be put. */
279extern GNode	*lastNode;  	/* Last node for which a banner was printed.
280				 * If Rmt module finds it necessary to print
281				 * a banner, it should set this to the node
282				 * for which the banner was printed */
283extern int  	nJobs;	    	/* Number of jobs running (local and remote) */
284extern int  	nLocal;	    	/* Number of jobs running locally */
285extern Lst  	jobs;	    	/* List of active job descriptors */
286extern Lst  	stoppedJobs;	/* List of jobs that are stopped or didn't
287				 * quite get started */
288#endif
289
290void Shell_Init(void);
291void Job_Touch(GNode *, Boolean);
292Boolean Job_CheckCommands(GNode *, void (*abortProc )(const char *, ...));
293void Job_CatchChildren(Boolean);
294void Job_CatchOutput(void);
295void Job_Make(GNode *);
296void Job_Init(int, int);
297Boolean Job_Full(void);
298Boolean Job_Empty(void);
299ReturnStatus Job_ParseShell(char *);
300int Job_Finish(void);
301void Job_End(void);
302void Job_Wait(void);
303void Job_AbortAll(void);
304void JobFlagForMigration(int);
305void Job_TokenReturn(void);
306void Job_TokenFlush(void);
307Boolean Job_TokenWithdraw(void);
308void Job_ServerStart(int);
309
310#endif /* _JOB_H_ */
311