job.h revision 1.32
1/*	$NetBSD: job.h,v 1.32 2006/10/09 14:36:41 dsl Exp $	*/
2
3/*
4 * Copyright (c) 1988, 1989, 1990 The Regents of the University of California.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to Berkeley by
8 * Adam de Boor.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 *    notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 *    notice, this list of conditions and the following disclaimer in the
17 *    documentation and/or other materials provided with the distribution.
18 * 3. Neither the name of the University nor the names of its contributors
19 *    may be used to endorse or promote products derived from this software
20 *    without specific prior written permission.
21 *
22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32 * SUCH DAMAGE.
33 *
34 *	from: @(#)job.h	8.1 (Berkeley) 6/6/93
35 */
36
37/*
38 * Copyright (c) 1988, 1989 by Adam de Boor
39 * Copyright (c) 1989 by Berkeley Softworks
40 * All rights reserved.
41 *
42 * This code is derived from software contributed to Berkeley by
43 * Adam de Boor.
44 *
45 * Redistribution and use in source and binary forms, with or without
46 * modification, are permitted provided that the following conditions
47 * are met:
48 * 1. Redistributions of source code must retain the above copyright
49 *    notice, this list of conditions and the following disclaimer.
50 * 2. Redistributions in binary form must reproduce the above copyright
51 *    notice, this list of conditions and the following disclaimer in the
52 *    documentation and/or other materials provided with the distribution.
53 * 3. All advertising materials mentioning features or use of this software
54 *    must display the following acknowledgement:
55 *	This product includes software developed by the University of
56 *	California, Berkeley and its contributors.
57 * 4. Neither the name of the University nor the names of its contributors
58 *    may be used to endorse or promote products derived from this software
59 *    without specific prior written permission.
60 *
61 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
62 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
63 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
64 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
65 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
66 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
67 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
68 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
69 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
70 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
71 * SUCH DAMAGE.
72 *
73 *	from: @(#)job.h	8.1 (Berkeley) 6/6/93
74 */
75
76/*-
77 * job.h --
78 *	Definitions pertaining to the running of jobs in parallel mode.
79 */
80#ifndef _JOB_H_
81#define _JOB_H_
82
83#define TMPPAT	"/tmp/makeXXXXXX"
84
85#ifdef USE_SELECT
86/*
87 * Emulate poll() in terms of select().  This is not a complete
88 * emulation but it is sufficient for make's purposes.
89 */
90
91#define poll emul_poll
92#define pollfd emul_pollfd
93
94struct emul_pollfd {
95    int fd;
96    short events;
97    short revents;
98};
99
100#define	POLLIN		0x0001
101#define	POLLOUT		0x0004
102
103int
104emul_poll(struct pollfd *fd, int nfd, int timeout);
105#endif
106
107/*
108 * The POLL_MSEC constant determines the maximum number of milliseconds spent
109 * in poll before coming out to see if a child has finished.
110 */
111#define POLL_MSEC	5000
112
113
114/*-
115 * Job Table definitions.
116 *
117 * Each job has several things associated with it:
118 *	1) The process id of the child shell
119 *	2) The graph node describing the target being made by this job
120 *	3) A LstNode for the first command to be saved after the job
121 *	   completes. This is NILLNODE if there was no "..." in the job's
122 *	   commands.
123 *	4) An FILE* for writing out the commands. This is only
124 *	   used before the job is actually started.
125 *	5) The output is being caught via a pipe and
126 *	   the descriptors of our pipe, an array in which output is line
127 *	   buffered and the current position in that buffer are all
128 *	   maintained for each job.
129 *	6) A word of flags which determine how the module handles errors,
130 *	   echoing, etc. for the job
131 *
132 * The job "table" is kept as a linked Lst in 'jobs', with the number of
133 * active jobs maintained in the 'nJobs' variable. At no time will this
134 * exceed the value of 'maxJobs', initialized by the Job_Init function.
135 *
136 * When a job is finished, the Make_Update function is called on each of the
137 * parents of the node which was just remade. This takes care of the upward
138 * traversal of the dependency graph.
139 */
140struct pollfd;
141
142#define JOB_BUFSIZE	1024
143typedef struct Job {
144    int       	pid;	    /* The child's process ID */
145    GNode    	*node;      /* The target the child is making */
146    LstNode 	tailCmds;   /* The node of the first command to be
147			     * saved when the job has been run */
148    FILE 	*cmdFILE;   /* When creating the shell script, this is
149			     * where the commands go */
150    int		exit_status; /* from wait4() in signal handler */
151    char        job_state;  /* status of the job entry */
152#define JOB_ST_FREE	0	/* Job is available */
153#define JOB_ST_SETUP	1	/* Job is allocated but otherwise invalid */
154#define JOB_ST_RUNNING	3	/* Job is running, pid valid */
155#define JOB_ST_FINISHED	4	/* Job is done (ie after SIGCHILD) */
156    char        job_suspended;
157    short      	flags;	    /* Flags to control treatment of job */
158#define	JOB_IGNERR	0x001	/* Ignore non-zero exits */
159#define	JOB_SILENT	0x002	/* no output */
160#define JOB_SPECIAL	0x004	/* Target is a special one. i.e. run it locally
161				 * if we can't export it and maxLocal is 0 */
162#define JOB_IGNDOTS	0x008  	/* Ignore "..." lines when processing
163				 * commands */
164#define JOB_TRACED	0x400	/* we've sent 'set -x' */
165
166    int	  	inPipe;		/* Input side of pipe associated
167				 * with job's output channel */
168    struct pollfd *inPollfd;	/* pollfd associated with inPipe */
169    int   	outPipe;	/* Output side of pipe associated with
170				 * job's output channel */
171    char  	outBuf[JOB_BUFSIZE + 1];
172				/* Buffer for storing the output of the
173				 * job, line by line */
174    int   	curPos;	/* Current position in op_outBuf */
175} Job;
176
177
178/*-
179 * Shell Specifications:
180 * Each shell type has associated with it the following information:
181 *	1) The string which must match the last character of the shell name
182 *	   for the shell to be considered of this type. The longest match
183 *	   wins.
184 *	2) A command to issue to turn off echoing of command lines
185 *	3) A command to issue to turn echoing back on again
186 *	4) What the shell prints, and its length, when given the echo-off
187 *	   command. This line will not be printed when received from the shell
188 *	5) A boolean to tell if the shell has the ability to control
189 *	   error checking for individual commands.
190 *	6) The string to turn this checking on.
191 *	7) The string to turn it off.
192 *	8) The command-flag to give to cause the shell to start echoing
193 *	   commands right away.
194 *	9) The command-flag to cause the shell to Lib_Exit when an error is
195 *	   detected in one of the commands.
196 *
197 * Some special stuff goes on if a shell doesn't have error control. In such
198 * a case, errCheck becomes a printf template for echoing the command,
199 * should echoing be on and ignErr becomes another printf template for
200 * executing the command while ignoring the return status. Finally errOut
201 * is a printf template for running the command and causing the shell to
202 * exit on error. If any of these strings are empty when hasErrCtl is FALSE,
203 * the command will be executed anyway as is and if it causes an error, so be
204 * it. Any templates setup to echo the command will escape any '$ ` \ "'i
205 * characters in the command string to avoid common problems with
206 * echo "%s\n" as a template.
207 */
208typedef struct Shell {
209    const char	 *name;		/* the name of the shell. For Bourne and C
210				 * shells, this is used only to find the
211				 * shell description when used as the single
212				 * source of a .SHELL target. For user-defined
213				 * shells, this is the full path of the shell.
214				 */
215    Boolean 	  hasEchoCtl;	/* True if both echoOff and echoOn defined */
216    const char   *echoOff;	/* command to turn off echo */
217    const char   *echoOn;	/* command to turn it back on again */
218    const char   *noPrint;	/* command to skip when printing output from
219				 * shell. This is usually the command which
220				 * was executed to turn off echoing */
221    int           noPLen;	/* length of noPrint command */
222    Boolean	  hasErrCtl;	/* set if can control error checking for
223				 * individual commands */
224    const char	 *errCheck;	/* string to turn error checking on */
225    const char	 *ignErr;	/* string to turn off error checking */
226    const char	 *errOut;	/* string to use for testing exit code */
227    const char	 *newline;	/* string literal that results in a newline
228				 * character when it appears outside of any
229				 * 'quote' or "quote" characters */
230    char   commentChar;		/* character used by shell for comment lines */
231
232    /*
233     * command-line flags
234     */
235    const char   *echo;		/* echo commands */
236    const char   *exit;		/* exit on error */
237}               Shell;
238
239extern const char *shellPath;
240extern const char *shellName;
241
242extern int	job_pipe[2];	/* token pipe for jobs. */
243extern int	jobTokensRunning; /* tokens currently "out" */
244extern int	maxJobs;	/* Max jobs we can run */
245extern int	maxJobTokens;	/* Number of token for the job pipe */
246
247void Shell_Init(void);
248const char *Shell_GetNewline(void);
249void Job_Touch(GNode *, Boolean);
250Boolean Job_CheckCommands(GNode *, void (*abortProc )(const char *, ...));
251#define CATCH_BLOCK	1
252void Job_CatchChildren(void);
253void Job_CatchOutput(void);
254void Job_Make(GNode *);
255void Job_Init(void);
256Boolean Job_Full(void);
257Boolean Job_Empty(void);
258ReturnStatus Job_ParseShell(char *);
259int Job_Finish(void);
260void Job_End(void);
261void Job_Wait(void);
262void Job_AbortAll(void);
263void JobFlagForMigration(int);
264void Job_TokenReturn(void);
265Boolean Job_TokenWithdraw(void);
266void Job_ServerStart(void);
267
268#endif /* _JOB_H_ */
269