xref: /xsrc/external/mit/libX11/dist/nls/Makefile.in

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
# Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice (including the next
# paragraph) shall be included in all copies or substantial portions of the
# Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
# DEALINGS IN THE SOFTWARE.
#

#							-*- Makefile -*-
# Rules for generating files using the C pre-processor
# (Replaces CppFileTarget from Imake)

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(nobase_dist_x11locale_DATA) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(top_srcdir)/cpprules.in \
	$(top_srcdir)/specs/xmlrules.in
@HAVE_FOP_TRUE@@HAVE_XMLTO_TRUE@am__append_1 = $(doc_sources:.xml=.ps) $(doc_sources:.xml=.pdf)
@HAVE_XMLTO_TEXT_TRUE@@HAVE_XMLTO_TRUE@am__append_2 = $(doc_sources:.xml=.txt)
@HAVE_STYLESHEETS_TRUE@@HAVE_XMLTO_TRUE@am__append_3 = \
@HAVE_STYLESHEETS_TRUE@@HAVE_XMLTO_TRUE@	-m $(XSL_STYLESHEET)	\
@HAVE_STYLESHEETS_TRUE@@HAVE_XMLTO_TRUE@	--stringparam img.src.path=$(abs_builddir)/	\
@HAVE_STYLESHEETS_TRUE@@HAVE_XMLTO_TRUE@	--stringparam html.stylesheet=$(STYLESHEET_SRCDIR)/xorg.css

@HAVE_XMLTO_TRUE@am__append_4 = $(spec_DATA) html
@HAVE_XMLTO_TRUE@am__append_5 = .xml .ps .pdf .txt .html
@HAVE_PERL_TRUE@am__append_6 = $(COMPOSE_CHARTS) $(doc_sources)
@HAVE_PERL_TRUE@am__append_7 = -o $(@D)
subdir = nls
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_define_dir.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/config.h \
	$(top_builddir)/include/X11/XlibConf.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(x11localedir)" \
	"$(DESTDIR)$(x11localedir)" "$(DESTDIR)$(specdir)" \
	"$(DESTDIR)$(x11localedir)"
DATA = $(nobase_dist_x11locale_DATA) $(nobase_x11locale_DATA) \
	$(spec_DATA) $(x11locale_DATA)
am__tty_colors = \
red=; grn=; lgn=; blu=; std=
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BIGFONT_CFLAGS = @BIGFONT_CFLAGS@
BIGFONT_LIBS = @BIGFONT_LIBS@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
CHANGELOG_CMD = @CHANGELOG_CMD@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@
CWARNFLAGS = @CWARNFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
FOP = @FOP@
GREP = @GREP@
I18N_MODULE_LIBS = @I18N_MODULE_LIBS@
INSTALL = @INSTALL@
INSTALL_CMD = @INSTALL_CMD@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KEYSYMDEFS = @KEYSYMDEFS@
LAUNCHD = @LAUNCHD@
LD = @LD@
LDFLAGS = @LDFLAGS@
LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIB_MAN_DIR = @LIB_MAN_DIR@
LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
LINT = @LINT@
LINTLIB = @LINTLIB@
LINT_FLAGS = @LINT_FLAGS@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MALLOC_ZERO_CFLAGS = @MALLOC_ZERO_CFLAGS@
MANIFEST_TOOL = @MANIFEST_TOOL@
MAN_SUBSTS = @MAN_SUBSTS@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
RAWCPP = @RAWCPP@
RAWCPPFLAGS = @RAWCPPFLAGS@
SED = sed
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
VERSION = @VERSION@
WCHAR32 = @WCHAR32@
X11_CFLAGS = @X11_CFLAGS@
X11_DATADIR = @X11_DATADIR@
X11_EXTRA_DEPS = @X11_EXTRA_DEPS@
X11_LIBDIR = @X11_LIBDIR@
X11_LIBS = @X11_LIBS@
X11_LOCALEDATADIR = @X11_LOCALEDATADIR@
X11_LOCALEDIR = @X11_LOCALEDIR@
X11_LOCALELIBDIR = @X11_LOCALELIBDIR@
XERRORDB = @XERRORDB@
XKBPROTO_REQUIRES = @XKBPROTO_REQUIRES@
XKEYSYMDB = @XKEYSYMDB@
XLOCALEDATADIR = @XLOCALEDATADIR@
XLOCALEDIR = @XLOCALEDIR@
XLOCALELIBDIR = @XLOCALELIBDIR@
XMALLOC_ZERO_CFLAGS = @XMALLOC_ZERO_CFLAGS@
XMLTO = @XMLTO@
XORG_MAN_PAGE = @XORG_MAN_PAGE@
XORG_SGML_PATH = @XORG_SGML_PATH@
XSL_STYLESHEET = @XSL_STYLESHEET@
XTHREADLIB = @XTHREADLIB@
XTHREAD_CFLAGS = @XTHREAD_CFLAGS@
XTMALLOC_ZERO_CFLAGS = @XTMALLOC_ZERO_CFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
x11localedir = $(X11_LOCALEDATADIR)
specdir = $(docdir)/Compose
CLEANFILES = $(am__append_4) locale.alias locale.alias.l1 \
	locale.alias.l2 compose.dir compose.dir.l1 compose.dir.l2 \
	locale.dir locale.dir.l1 locale.dir.l2 XLC_LOCALE \
	$(nobase_x11locale_DATA) $(am__append_6)
SUFFIXES = $(am__append_5) .pre
XMLTO_FLAGS = $(am__append_3) $(am__append_7)
@HAVE_XMLTO_TRUE@spec_DATA = $(doc_sources:.xml=.html) $(am__append_1) \
@HAVE_XMLTO_TRUE@	$(am__append_2)
EXTRA_DIST = locale.alias.pre compose.dir.pre locale.dir.pre \
	compose-check.pl compose-chart.pl \
	$(nobase_x11locale_DATA:%=%.pre)
x11locale_DATA = locale.alias locale.dir compose.dir
locales = \
	am_ET.UTF-8		\
	armscii-8		\
	C			\
	el_GR.UTF-8		\
	en_US.UTF-8		\
	fi_FI.UTF-8		\
	georgian-academy	\
	georgian-ps		\
	ibm-cp1133		\
	iscii-dev		\
	isiri-3342		\
	iso8859-1		\
	iso8859-10		\
	iso8859-11		\
	iso8859-13		\
	iso8859-14		\
	iso8859-15		\
	iso8859-2		\
	iso8859-3		\
	iso8859-4		\
	iso8859-5		\
	iso8859-6		\
	iso8859-7		\
	iso8859-8		\
	iso8859-9		\
	iso8859-9e		\
	ja			\
	ja.JIS			\
	ja_JP.UTF-8		\
	ja.S90			\
	ja.SJIS			\
	ja.U90			\
	ko			\
	koi8-c			\
	koi8-r			\
	koi8-u			\
	ko_KR.UTF-8		\
	microsoft-cp1251	\
	microsoft-cp1255	\
	microsoft-cp1256	\
	mulelao-1		\
	nokhchi-1		\
	pt_BR.UTF-8		\
	ru_RU.UTF-8		\
	tatar-cyr		\
	th_TH			\
	th_TH.UTF-8		\
	tscii-0			\
	vi_VN.tcvn		\
	vi_VN.viscii		\
	zh_CN			\
	zh_CN.gb18030		\
	zh_CN.gbk		\
	zh_CN.UTF-8		\
	zh_HK.big5		\
	zh_HK.big5hkscs		\
	zh_HK.UTF-8		\
	zh_TW			\
	zh_TW.big5		\
	zh_TW.UTF-8

WCHAR32_FLAGS = -DWCHAR32=@WCHAR32@
CPP_FILES_FLAGS = $(WCHAR32_FLAGS)

# Translate XCOMM into pound sign with sed, rather than passing -DXCOMM=XCOMM
# to cpp, because that trick does not work on all ANSI C preprocessors.
# Delete line numbers from the cpp output (-P is not portable, I guess).
# Allow XCOMM to be preceded by whitespace and provide a means of generating
# output lines with trailing backslashes.
# Allow XHASH to always be substituted, even in cases where XCOMM isn't.
CPP_SED_MAGIC = $(SED) -e '/^\#  *[0-9][0-9]*  *.*$$/d' \
                       -e '/^\#line  *[0-9][0-9]*  *.*$$/d' \
                       -e '/^[         ]*XCOMM$$/s/XCOMM/\#/' \
                       -e '/^[         ]*XCOMM[^a-zA-Z0-9_]/s/XCOMM/\#/' \
                       -e '/^[         ]*XHASH/s/XHASH/\#/' \
                       -e 's,X11_LOCALEDATADIR,$(X11_LOCALEDATADIR),g' \
                       -e '/\@\@$$/s/\@\@$$/\\/'

@HAVE_PERL_TRUE@doc_sources = Compose/index.xml \
@HAVE_PERL_TRUE@	$(locales:%=Compose/%.xml)

# Per-locale data files
nobase_dist_x11locale_DATA = $(locales:%=%/XI18N_OBJS)
nobase_x11locale_DATA = $(locales:%=%/XLC_LOCALE) $(locales:%=%/Compose)
@HAVE_PERL_TRUE@TESTS_ENVIRONMENT = $(PERL)
@HAVE_PERL_TRUE@TESTS = $(srcdir)/compose-check.pl
@HAVE_PERL_TRUE@COMPOSE_CHARTS = $(locales:%=%/Compose.xml)
all: all-am

.SUFFIXES:
.SUFFIXES: .xml .ps .pdf .txt .html .pre
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/specs/xmlrules.in $(top_srcdir)/cpprules.in $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign nls/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign nls/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-nobase_dist_x11localeDATA: $(nobase_dist_x11locale_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(x11localedir)" || $(MKDIR_P) "$(DESTDIR)$(x11localedir)"
	@list='$(nobase_dist_x11locale_DATA)'; test -n "$(x11localedir)" || list=; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo "$(MKDIR_P) '$(DESTDIR)$(x11localedir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(x11localedir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(x11localedir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(x11localedir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_dist_x11localeDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_dist_x11locale_DATA)'; test -n "$(x11localedir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(x11localedir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(x11localedir)" && rm -f $$files
install-nobase_x11localeDATA: $(nobase_x11locale_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(x11localedir)" || $(MKDIR_P) "$(DESTDIR)$(x11localedir)"
	@list='$(nobase_x11locale_DATA)'; test -n "$(x11localedir)" || list=; \
	$(am__nobase_list) | while read dir files; do \
	  xfiles=; for file in $$files; do \
	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
	  test -z "$$xfiles" || { \
	    test "x$$dir" = x. || { \
	      echo "$(MKDIR_P) '$(DESTDIR)$(x11localedir)/$$dir'"; \
	      $(MKDIR_P) "$(DESTDIR)$(x11localedir)/$$dir"; }; \
	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(x11localedir)/$$dir'"; \
	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(x11localedir)/$$dir" || exit $$?; }; \
	done

uninstall-nobase_x11localeDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(nobase_x11locale_DATA)'; test -n "$(x11localedir)" || list=; \
	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(x11localedir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(x11localedir)" && rm -f $$files
install-specDATA: $(spec_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(specdir)" || $(MKDIR_P) "$(DESTDIR)$(specdir)"
	@list='$(spec_DATA)'; test -n "$(specdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(specdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(specdir)" || exit $$?; \
	done

uninstall-specDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(spec_DATA)'; test -n "$(specdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(specdir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(specdir)" && rm -f $$files
install-x11localeDATA: $(x11locale_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(x11localedir)" || $(MKDIR_P) "$(DESTDIR)$(x11localedir)"
	@list='$(x11locale_DATA)'; test -n "$(x11localedir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(x11localedir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(x11localedir)" || exit $$?; \
	done

uninstall-x11localeDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(x11locale_DATA)'; test -n "$(x11localedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	test -n "$$files" || exit 0; \
	echo " ( cd '$(DESTDIR)$(x11localedir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(x11localedir)" && rm -f $$files
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


check-TESTS: $(TESTS)
	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
	srcdir=$(srcdir); export srcdir; \
	list=' $(TESTS) '; \
	$(am__tty_colors); \
	if test -n "$$list"; then \
	  for tst in $$list; do \
	    if test -f ./$$tst; then dir=./; \
	    elif test -f $$tst; then dir=; \
	    else dir="$(srcdir)/"; fi; \
	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xpass=`expr $$xpass + 1`; \
		failed=`expr $$failed + 1`; \
		col=$$red; res=XPASS; \
	      ;; \
	      *) \
		col=$$grn; res=PASS; \
	      ;; \
	      esac; \
	    elif test $$? -ne 77; then \
	      all=`expr $$all + 1`; \
	      case " $(XFAIL_TESTS) " in \
	      *[\ \	]$$tst[\ \	]*) \
		xfail=`expr $$xfail + 1`; \
		col=$$lgn; res=XFAIL; \
	      ;; \
	      *) \
		failed=`expr $$failed + 1`; \
		col=$$red; res=FAIL; \
	      ;; \
	      esac; \
	    else \
	      skip=`expr $$skip + 1`; \
	      col=$$blu; res=SKIP; \
	    fi; \
	    echo "$${col}$$res$${std}: $$tst"; \
	  done; \
	  if test "$$all" -eq 1; then \
	    tests="test"; \
	    All=""; \
	  else \
	    tests="tests"; \
	    All="All "; \
	  fi; \
	  if test "$$failed" -eq 0; then \
	    if test "$$xfail" -eq 0; then \
	      banner="$$All$$all $$tests passed"; \
	    else \
	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
	    fi; \
	  else \
	    if test "$$xpass" -eq 0; then \
	      banner="$$failed of $$all $$tests failed"; \
	    else \
	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
	    fi; \
	  fi; \
	  dashes="$$banner"; \
	  skipped=""; \
	  if test "$$skip" -ne 0; then \
	    if test "$$skip" -eq 1; then \
	      skipped="($$skip test was not run)"; \
	    else \
	      skipped="($$skip tests were not run)"; \
	    fi; \
	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$skipped"; \
	  fi; \
	  report=""; \
	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
	    report="Please report to $(PACKAGE_BUGREPORT)"; \
	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
	      dashes="$$report"; \
	  fi; \
	  dashes=`echo "$$dashes" | sed s/./=/g`; \
	  if test "$$failed" -eq 0; then \
	    echo "$$grn$$dashes"; \
	  else \
	    echo "$$red$$dashes"; \
	  fi; \
	  echo "$$banner"; \
	  test -z "$$skipped" || echo "$$skipped"; \
	  test -z "$$report" || echo "$$report"; \
	  echo "$$dashes$$std"; \
	  test "$$failed" -eq 0; \
	else :; fi

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
all-am: Makefile $(DATA)
installdirs:
	for dir in "$(DESTDIR)$(x11localedir)" "$(DESTDIR)$(x11localedir)" "$(DESTDIR)$(specdir)" "$(DESTDIR)$(x11localedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
@HAVE_PERL_FALSE@clean-local:
clean: clean-am

clean-am: clean-generic clean-libtool clean-local mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-nobase_dist_x11localeDATA \
	install-nobase_x11localeDATA install-specDATA \
	install-x11localeDATA

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-nobase_dist_x11localeDATA \
	uninstall-nobase_x11localeDATA uninstall-specDATA \
	uninstall-x11localeDATA

.MAKE: check-am install-am install-strip

.PHONY: all all-am check check-TESTS check-am clean clean-generic \
	clean-libtool clean-local distclean distclean-generic \
	distclean-libtool distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-nobase_dist_x11localeDATA install-nobase_x11localeDATA \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-specDATA install-strip install-x11localeDATA \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-nobase_dist_x11localeDATA \
	uninstall-nobase_x11localeDATA uninstall-specDATA \
	uninstall-x11localeDATA


@HAVE_XMLTO_TRUE@%.txt: %.xml $(dist_spec_DATA)
@HAVE_XMLTO_TRUE@	$(AM_V_GEN)$(XMLTO) $(XMLTO_FLAGS) txt $<

@HAVE_XMLTO_TRUE@%.html: %.xml $(dist_spec_DATA)
@HAVE_XMLTO_TRUE@	$(AM_V_GEN)$(XMLTO) $(XMLTO_FLAGS) xhtml-nochunks $<

@HAVE_XMLTO_TRUE@%.pdf: %.xml $(dist_spec_DATA)
@HAVE_XMLTO_TRUE@	$(AM_V_GEN)$(XMLTO) $(XMLTO_FLAGS) --with-fop pdf $<

@HAVE_XMLTO_TRUE@%.ps: %.xml $(dist_spec_DATA)
@HAVE_XMLTO_TRUE@	$(AM_V_GEN)$(XMLTO) $(XMLTO_FLAGS) --with-fop ps $<

@HAVE_XMLTO_TRUE@chunked-html: $(doc_sources)
@HAVE_XMLTO_TRUE@	$(AM_V_GEN)$(XMLTO) $(XMLTO_FLAGS) -o html xhtml $(doc_sources)

.pre:
	@$(MKDIR_P) $(@D)
	$(AM_V_GEN)$(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $< | $(CPP_SED_MAGIC) > $@

# Global data files

locale.alias: locale.alias.pre
	$(AM_V_GEN)$(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $(srcdir)/locale.alias.pre | $(CPP_SED_MAGIC) > locale.alias.l1
	sed -e '/^[^#][^        ]*:/s/://' -e '/^[^#].*[        ].*:/d' \
        < locale.alias.l1 > locale.alias.l2
	cat locale.alias.l2 locale.alias.l1 > locale.alias

compose.dir: compose.dir.pre
	$(AM_V_GEN)$(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $(srcdir)/compose.dir.pre | $(CPP_SED_MAGIC) > compose.dir.l1
	sed -e '/^[^#][^        ]*:/s/://' -e '/^[^#].*[        ].*:/d' \
        < compose.dir.l1 > compose.dir.l2
	cat compose.dir.l2 compose.dir.l1 > compose.dir

locale.dir: locale.dir.pre
	$(AM_V_GEN)$(RAWCPP) $(RAWCPPFLAGS) $(CPP_FILES_FLAGS) < $(srcdir)/locale.dir.pre | $(CPP_SED_MAGIC) > locale.dir.l1
	sed -e '/^[^#][^        ]*:/s/://' -e '/^[^#].*[        ].*:/d' \
        < locale.dir.l1 > locale.dir.l2
	cat locale.dir.l2 locale.dir.l1 > locale.dir

@HAVE_PERL_TRUE@Compose/index.xml:
@HAVE_PERL_TRUE@	@$(MKDIR_P) $(@D)
@HAVE_PERL_TRUE@	$(AM_V_GEN)$(PERL) $(srcdir)/compose-chart.pl \
@HAVE_PERL_TRUE@	 --index --output="$@" $(locales)

@HAVE_PERL_TRUE@clean-local: clean-Compose-dir
@HAVE_PERL_TRUE@clean-Compose-dir:
@HAVE_PERL_TRUE@	-rm -rf Compose

@HAVE_PERL_TRUE@%/Compose.xml: %/Compose
@HAVE_PERL_TRUE@	$(AM_V_GEN)$(PERL) $(srcdir)/compose-chart.pl \
@HAVE_PERL_TRUE@	 --locale="$(@D)" --output="$@" $<

@HAVE_PERL_TRUE@Compose/%.xml: %/Compose.xml
@HAVE_PERL_TRUE@	$(AM_V_GEN)cp $< $@

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: