Makefile.in revision c63293b5
1# Makefile.in generated by automake 1.11.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, 6# Inc. 7# This Makefile.in is free software; the Free Software Foundation 8# gives unlimited permission to copy and/or distribute it, 9# with or without modifications, as long as this notice is preserved. 10 11# This program is distributed in the hope that it will be useful, 12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 14# PARTICULAR PURPOSE. 15 16@SET_MAKE@ 17 18# 19# Copyright © 2003 Keith Packard, Noah Levitt 20# 21# Permission to use, copy, modify, distribute, and sell this software and its 22# documentation for any purpose is hereby granted without fee, provided that 23# the above copyright notice appear in all copies and that both that 24# copyright notice and this permission notice appear in supporting 25# documentation, and that the name of Keith Packard not be used in 26# advertising or publicity pertaining to distribution of the software without 27# specific, written prior permission. Keith Packard makes no 28# representations about the suitability of this software for any purpose. It 29# is provided "as is" without express or implied warranty. 30# 31# KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 32# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 33# EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR 34# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 35# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 36# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 37# PERFORMANCE OF THIS SOFTWARE. 38 39VPATH = @srcdir@ 40pkgdatadir = $(datadir)/@PACKAGE@ 41pkgincludedir = $(includedir)/@PACKAGE@ 42pkglibdir = $(libdir)/@PACKAGE@ 43pkglibexecdir = $(libexecdir)/@PACKAGE@ 44am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 45install_sh_DATA = $(install_sh) -c -m 644 46install_sh_PROGRAM = $(install_sh) -c 47install_sh_SCRIPT = $(install_sh) -c 48INSTALL_HEADER = $(INSTALL_DATA) 49transform = $(program_transform_name) 50NORMAL_INSTALL = : 51PRE_INSTALL = : 52POST_INSTALL = : 53NORMAL_UNINSTALL = : 54PRE_UNINSTALL = : 55POST_UNINSTALL = : 56build_triplet = @build@ 57host_triplet = @host@ 58subdir = . 59DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ 60 $(srcdir)/Makefile.in $(srcdir)/config.h.in \ 61 $(srcdir)/xcursor.pc.in $(top_srcdir)/configure AUTHORS \ 62 COPYING ChangeLog INSTALL config.guess config.sub depcomp \ 63 install-sh ltmain.sh missing 64ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 65am__aclocal_m4_deps = $(top_srcdir)/configure.ac 66am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 67 $(ACLOCAL_M4) 68am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 69 configure.lineno config.status.lineno 70mkinstalldirs = $(install_sh) -d 71CONFIG_HEADER = config.h 72CONFIG_CLEAN_FILES = xcursor.pc 73CONFIG_CLEAN_VPATH_FILES = 74AM_V_GEN = $(am__v_GEN_$(V)) 75am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) 76am__v_GEN_0 = @echo " GEN " $@; 77AM_V_at = $(am__v_at_$(V)) 78am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) 79am__v_at_0 = @ 80SOURCES = 81DIST_SOURCES = 82RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 83 html-recursive info-recursive install-data-recursive \ 84 install-dvi-recursive install-exec-recursive \ 85 install-html-recursive install-info-recursive \ 86 install-pdf-recursive install-ps-recursive install-recursive \ 87 installcheck-recursive installdirs-recursive pdf-recursive \ 88 ps-recursive uninstall-recursive 89am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 90am__vpath_adj = case $$p in \ 91 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 92 *) f=$$p;; \ 93 esac; 94am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 95am__install_max = 40 96am__nobase_strip_setup = \ 97 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 98am__nobase_strip = \ 99 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 100am__nobase_list = $(am__nobase_strip_setup); \ 101 for p in $$list; do echo "$$p $$p"; done | \ 102 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 103 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 104 if (++n[$$2] == $(am__install_max)) \ 105 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 106 END { for (dir in files) print dir, files[dir] }' 107am__base_list = \ 108 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 109 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 110am__installdirs = "$(DESTDIR)$(pkgconfigdir)" 111DATA = $(pkgconfig_DATA) 112RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 113 distclean-recursive maintainer-clean-recursive 114AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ 115 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ 116 distdir dist dist-all distcheck 117ETAGS = etags 118CTAGS = ctags 119DIST_SUBDIRS = $(SUBDIRS) 120DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 121distdir = $(PACKAGE)-$(VERSION) 122top_distdir = $(distdir) 123am__remove_distdir = \ 124 { test ! -d "$(distdir)" \ 125 || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 126 && rm -fr "$(distdir)"; }; } 127am__relativize = \ 128 dir0=`pwd`; \ 129 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 130 sed_rest='s,^[^/]*/*,,'; \ 131 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 132 sed_butlast='s,/*[^/]*$$,,'; \ 133 while test -n "$$dir1"; do \ 134 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 135 if test "$$first" != "."; then \ 136 if test "$$first" = ".."; then \ 137 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 138 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 139 else \ 140 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 141 if test "$$first2" = "$$first"; then \ 142 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 143 else \ 144 dir2="../$$dir2"; \ 145 fi; \ 146 dir0="$$dir0"/"$$first"; \ 147 fi; \ 148 fi; \ 149 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 150 done; \ 151 reldir="$$dir2" 152DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 153GZIP_ENV = --best 154distuninstallcheck_listfiles = find . -type f -print 155distcleancheck_listfiles = find . -type f -print 156ACLOCAL = @ACLOCAL@ 157ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 158ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 159AMTAR = @AMTAR@ 160AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 161APP_MAN_DIR = @APP_MAN_DIR@ 162APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 163AR = @AR@ 164AUTOCONF = @AUTOCONF@ 165AUTOHEADER = @AUTOHEADER@ 166AUTOMAKE = @AUTOMAKE@ 167AWK = @AWK@ 168CC = @CC@ 169CCDEPMODE = @CCDEPMODE@ 170CFLAGS = @CFLAGS@ 171CHANGELOG_CMD = @CHANGELOG_CMD@ 172CPP = @CPP@ 173CPPFLAGS = @CPPFLAGS@ 174CWARNFLAGS = @CWARNFLAGS@ 175CYGPATH_W = @CYGPATH_W@ 176DEFS = @DEFS@ 177DEPDIR = @DEPDIR@ 178DLLTOOL = @DLLTOOL@ 179DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 180DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 181DSYMUTIL = @DSYMUTIL@ 182DUMPBIN = @DUMPBIN@ 183ECHO_C = @ECHO_C@ 184ECHO_N = @ECHO_N@ 185ECHO_T = @ECHO_T@ 186EGREP = @EGREP@ 187EXEEXT = @EXEEXT@ 188FGREP = @FGREP@ 189FILE_MAN_DIR = @FILE_MAN_DIR@ 190FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 191GREP = @GREP@ 192ICONDIR = @ICONDIR@ 193INSTALL = @INSTALL@ 194INSTALL_CMD = @INSTALL_CMD@ 195INSTALL_DATA = @INSTALL_DATA@ 196INSTALL_PROGRAM = @INSTALL_PROGRAM@ 197INSTALL_SCRIPT = @INSTALL_SCRIPT@ 198INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 199LD = @LD@ 200LDFLAGS = @LDFLAGS@ 201LIBOBJS = @LIBOBJS@ 202LIBS = @LIBS@ 203LIBTOOL = @LIBTOOL@ 204LIB_MAN_DIR = @LIB_MAN_DIR@ 205LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 206LINT = @LINT@ 207LINT_FLAGS = @LINT_FLAGS@ 208LIPO = @LIPO@ 209LN_S = @LN_S@ 210LTLIBOBJS = @LTLIBOBJS@ 211MAINT = @MAINT@ 212MAKEINFO = @MAKEINFO@ 213MANIFEST_TOOL = @MANIFEST_TOOL@ 214MAN_SUBSTS = @MAN_SUBSTS@ 215MISC_MAN_DIR = @MISC_MAN_DIR@ 216MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 217MKDIR_P = @MKDIR_P@ 218NM = @NM@ 219NMEDIT = @NMEDIT@ 220OBJDUMP = @OBJDUMP@ 221OBJEXT = @OBJEXT@ 222OTOOL = @OTOOL@ 223OTOOL64 = @OTOOL64@ 224PACKAGE = @PACKAGE@ 225PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 226PACKAGE_NAME = @PACKAGE_NAME@ 227PACKAGE_STRING = @PACKAGE_STRING@ 228PACKAGE_TARNAME = @PACKAGE_TARNAME@ 229PACKAGE_URL = @PACKAGE_URL@ 230PACKAGE_VERSION = @PACKAGE_VERSION@ 231PATH_SEPARATOR = @PATH_SEPARATOR@ 232PKG_CONFIG = @PKG_CONFIG@ 233RANLIB = @RANLIB@ 234SED = @SED@ 235SET_MAKE = @SET_MAKE@ 236SHELL = @SHELL@ 237STRICT_CFLAGS = @STRICT_CFLAGS@ 238STRIP = @STRIP@ 239VERSION = @VERSION@ 240XCURSORPATH = @XCURSORPATH@ 241XCURSOR_CFLAGS = @XCURSOR_CFLAGS@ 242XCURSOR_LIBS = @XCURSOR_LIBS@ 243XORG_MAN_PAGE = @XORG_MAN_PAGE@ 244abs_builddir = @abs_builddir@ 245abs_srcdir = @abs_srcdir@ 246abs_top_builddir = @abs_top_builddir@ 247abs_top_srcdir = @abs_top_srcdir@ 248ac_ct_AR = @ac_ct_AR@ 249ac_ct_CC = @ac_ct_CC@ 250ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 251am__include = @am__include@ 252am__leading_dot = @am__leading_dot@ 253am__quote = @am__quote@ 254am__tar = @am__tar@ 255am__untar = @am__untar@ 256bindir = @bindir@ 257build = @build@ 258build_alias = @build_alias@ 259build_cpu = @build_cpu@ 260build_os = @build_os@ 261build_vendor = @build_vendor@ 262builddir = @builddir@ 263datadir = @datadir@ 264datarootdir = @datarootdir@ 265docdir = @docdir@ 266dvidir = @dvidir@ 267exec_prefix = @exec_prefix@ 268host = @host@ 269host_alias = @host_alias@ 270host_cpu = @host_cpu@ 271host_os = @host_os@ 272host_vendor = @host_vendor@ 273htmldir = @htmldir@ 274includedir = @includedir@ 275infodir = @infodir@ 276install_sh = @install_sh@ 277libdir = @libdir@ 278libexecdir = @libexecdir@ 279localedir = @localedir@ 280localstatedir = @localstatedir@ 281mandir = @mandir@ 282mkdir_p = @mkdir_p@ 283oldincludedir = @oldincludedir@ 284pdfdir = @pdfdir@ 285prefix = @prefix@ 286program_transform_name = @program_transform_name@ 287psdir = @psdir@ 288sbindir = @sbindir@ 289sharedstatedir = @sharedstatedir@ 290srcdir = @srcdir@ 291sysconfdir = @sysconfdir@ 292target_alias = @target_alias@ 293top_build_prefix = @top_build_prefix@ 294top_builddir = @top_builddir@ 295top_srcdir = @top_srcdir@ 296SUBDIRS = src man 297AM_CFLAGS = $(XRENDER_CFLAGS) $(XFIXES_CFLAGS) $(X_CFLAGS) 298pkgconfigdir = $(libdir)/pkgconfig 299pkgconfig_DATA = xcursor.pc 300MAINTAINERCLEANFILES = ChangeLog INSTALL 301all: config.h 302 $(MAKE) $(AM_MAKEFLAGS) all-recursive 303 304.SUFFIXES: 305am--refresh: 306 @: 307$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 308 @for dep in $?; do \ 309 case '$(am__configure_deps)' in \ 310 *$$dep*) \ 311 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 312 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 313 && exit 0; \ 314 exit 1;; \ 315 esac; \ 316 done; \ 317 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 318 $(am__cd) $(top_srcdir) && \ 319 $(AUTOMAKE) --foreign Makefile 320.PRECIOUS: Makefile 321Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 322 @case '$?' in \ 323 *config.status*) \ 324 echo ' $(SHELL) ./config.status'; \ 325 $(SHELL) ./config.status;; \ 326 *) \ 327 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 328 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 329 esac; 330 331$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 332 $(SHELL) ./config.status --recheck 333 334$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 335 $(am__cd) $(srcdir) && $(AUTOCONF) 336$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 337 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 338$(am__aclocal_m4_deps): 339 340config.h: stamp-h1 341 @if test ! -f $@; then \ 342 rm -f stamp-h1; \ 343 $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ 344 else :; fi 345 346stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 347 @rm -f stamp-h1 348 cd $(top_builddir) && $(SHELL) ./config.status config.h 349$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 350 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 351 rm -f stamp-h1 352 touch $@ 353 354distclean-hdr: 355 -rm -f config.h stamp-h1 356xcursor.pc: $(top_builddir)/config.status $(srcdir)/xcursor.pc.in 357 cd $(top_builddir) && $(SHELL) ./config.status $@ 358 359mostlyclean-libtool: 360 -rm -f *.lo 361 362clean-libtool: 363 -rm -rf .libs _libs 364 365distclean-libtool: 366 -rm -f libtool config.lt 367install-pkgconfigDATA: $(pkgconfig_DATA) 368 @$(NORMAL_INSTALL) 369 test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" 370 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 371 for p in $$list; do \ 372 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 373 echo "$$d$$p"; \ 374 done | $(am__base_list) | \ 375 while read files; do \ 376 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ 377 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ 378 done 379 380uninstall-pkgconfigDATA: 381 @$(NORMAL_UNINSTALL) 382 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 383 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 384 test -n "$$files" || exit 0; \ 385 echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ 386 cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files 387 388# This directory's subdirectories are mostly independent; you can cd 389# into them and run `make' without going through this Makefile. 390# To change the values of `make' variables: instead of editing Makefiles, 391# (1) if the variable is set in `config.status', edit `config.status' 392# (which will cause the Makefiles to be regenerated when you run `make'); 393# (2) otherwise, pass the desired values on the `make' command line. 394$(RECURSIVE_TARGETS): 395 @fail= failcom='exit 1'; \ 396 for f in x $$MAKEFLAGS; do \ 397 case $$f in \ 398 *=* | --[!k]*);; \ 399 *k*) failcom='fail=yes';; \ 400 esac; \ 401 done; \ 402 dot_seen=no; \ 403 target=`echo $@ | sed s/-recursive//`; \ 404 list='$(SUBDIRS)'; for subdir in $$list; do \ 405 echo "Making $$target in $$subdir"; \ 406 if test "$$subdir" = "."; then \ 407 dot_seen=yes; \ 408 local_target="$$target-am"; \ 409 else \ 410 local_target="$$target"; \ 411 fi; \ 412 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 413 || eval $$failcom; \ 414 done; \ 415 if test "$$dot_seen" = "no"; then \ 416 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 417 fi; test -z "$$fail" 418 419$(RECURSIVE_CLEAN_TARGETS): 420 @fail= failcom='exit 1'; \ 421 for f in x $$MAKEFLAGS; do \ 422 case $$f in \ 423 *=* | --[!k]*);; \ 424 *k*) failcom='fail=yes';; \ 425 esac; \ 426 done; \ 427 dot_seen=no; \ 428 case "$@" in \ 429 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 430 *) list='$(SUBDIRS)' ;; \ 431 esac; \ 432 rev=''; for subdir in $$list; do \ 433 if test "$$subdir" = "."; then :; else \ 434 rev="$$subdir $$rev"; \ 435 fi; \ 436 done; \ 437 rev="$$rev ."; \ 438 target=`echo $@ | sed s/-recursive//`; \ 439 for subdir in $$rev; do \ 440 echo "Making $$target in $$subdir"; \ 441 if test "$$subdir" = "."; then \ 442 local_target="$$target-am"; \ 443 else \ 444 local_target="$$target"; \ 445 fi; \ 446 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 447 || eval $$failcom; \ 448 done && test -z "$$fail" 449tags-recursive: 450 list='$(SUBDIRS)'; for subdir in $$list; do \ 451 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 452 done 453ctags-recursive: 454 list='$(SUBDIRS)'; for subdir in $$list; do \ 455 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 456 done 457 458ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 459 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 460 unique=`for i in $$list; do \ 461 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 462 done | \ 463 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 464 END { if (nonempty) { for (i in files) print i; }; }'`; \ 465 mkid -fID $$unique 466tags: TAGS 467 468TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 469 $(TAGS_FILES) $(LISP) 470 set x; \ 471 here=`pwd`; \ 472 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 473 include_option=--etags-include; \ 474 empty_fix=.; \ 475 else \ 476 include_option=--include; \ 477 empty_fix=; \ 478 fi; \ 479 list='$(SUBDIRS)'; for subdir in $$list; do \ 480 if test "$$subdir" = .; then :; else \ 481 test ! -f $$subdir/TAGS || \ 482 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 483 fi; \ 484 done; \ 485 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 486 unique=`for i in $$list; do \ 487 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 488 done | \ 489 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 490 END { if (nonempty) { for (i in files) print i; }; }'`; \ 491 shift; \ 492 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 493 test -n "$$unique" || unique=$$empty_fix; \ 494 if test $$# -gt 0; then \ 495 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 496 "$$@" $$unique; \ 497 else \ 498 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 499 $$unique; \ 500 fi; \ 501 fi 502ctags: CTAGS 503CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ 504 $(TAGS_FILES) $(LISP) 505 list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ 506 unique=`for i in $$list; do \ 507 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 508 done | \ 509 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 510 END { if (nonempty) { for (i in files) print i; }; }'`; \ 511 test -z "$(CTAGS_ARGS)$$unique" \ 512 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 513 $$unique 514 515GTAGS: 516 here=`$(am__cd) $(top_builddir) && pwd` \ 517 && $(am__cd) $(top_srcdir) \ 518 && gtags -i $(GTAGS_ARGS) "$$here" 519 520distclean-tags: 521 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 522 523distdir: $(DISTFILES) 524 $(am__remove_distdir) 525 test -d "$(distdir)" || mkdir "$(distdir)" 526 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 527 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 528 list='$(DISTFILES)'; \ 529 dist_files=`for file in $$list; do echo $$file; done | \ 530 sed -e "s|^$$srcdirstrip/||;t" \ 531 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 532 case $$dist_files in \ 533 */*) $(MKDIR_P) `echo "$$dist_files" | \ 534 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 535 sort -u` ;; \ 536 esac; \ 537 for file in $$dist_files; do \ 538 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 539 if test -d $$d/$$file; then \ 540 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 541 if test -d "$(distdir)/$$file"; then \ 542 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 543 fi; \ 544 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 545 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 546 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 547 fi; \ 548 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 549 else \ 550 test -f "$(distdir)/$$file" \ 551 || cp -p $$d/$$file "$(distdir)/$$file" \ 552 || exit 1; \ 553 fi; \ 554 done 555 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 556 if test "$$subdir" = .; then :; else \ 557 test -d "$(distdir)/$$subdir" \ 558 || $(MKDIR_P) "$(distdir)/$$subdir" \ 559 || exit 1; \ 560 fi; \ 561 done 562 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 563 if test "$$subdir" = .; then :; else \ 564 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 565 $(am__relativize); \ 566 new_distdir=$$reldir; \ 567 dir1=$$subdir; dir2="$(top_distdir)"; \ 568 $(am__relativize); \ 569 new_top_distdir=$$reldir; \ 570 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 571 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 572 ($(am__cd) $$subdir && \ 573 $(MAKE) $(AM_MAKEFLAGS) \ 574 top_distdir="$$new_top_distdir" \ 575 distdir="$$new_distdir" \ 576 am__remove_distdir=: \ 577 am__skip_length_check=: \ 578 am__skip_mode_fix=: \ 579 distdir) \ 580 || exit 1; \ 581 fi; \ 582 done 583 $(MAKE) $(AM_MAKEFLAGS) \ 584 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 585 dist-hook 586 -test -n "$(am__skip_mode_fix)" \ 587 || find "$(distdir)" -type d ! -perm -755 \ 588 -exec chmod u+rwx,go+rx {} \; -o \ 589 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 590 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 591 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 592 || chmod -R a+r "$(distdir)" 593dist-gzip: distdir 594 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 595 $(am__remove_distdir) 596dist-bzip2: distdir 597 tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 598 $(am__remove_distdir) 599 600dist-lzma: distdir 601 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma 602 $(am__remove_distdir) 603 604dist-xz: distdir 605 tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz 606 $(am__remove_distdir) 607 608dist-tarZ: distdir 609 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 610 $(am__remove_distdir) 611 612dist-shar: distdir 613 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 614 $(am__remove_distdir) 615 616dist-zip: distdir 617 -rm -f $(distdir).zip 618 zip -rq $(distdir).zip $(distdir) 619 $(am__remove_distdir) 620 621dist dist-all: distdir 622 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 623 tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 624 $(am__remove_distdir) 625 626# This target untars the dist file and tries a VPATH configuration. Then 627# it guarantees that the distribution is self-contained by making another 628# tarfile. 629distcheck: dist 630 case '$(DIST_ARCHIVES)' in \ 631 *.tar.gz*) \ 632 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 633 *.tar.bz2*) \ 634 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 635 *.tar.lzma*) \ 636 lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ 637 *.tar.xz*) \ 638 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 639 *.tar.Z*) \ 640 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 641 *.shar.gz*) \ 642 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 643 *.zip*) \ 644 unzip $(distdir).zip ;;\ 645 esac 646 chmod -R a-w $(distdir); chmod a+w $(distdir) 647 mkdir $(distdir)/_build 648 mkdir $(distdir)/_inst 649 chmod a-w $(distdir) 650 test -d $(distdir)/_build || exit 0; \ 651 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 652 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 653 && am__cwd=`pwd` \ 654 && $(am__cd) $(distdir)/_build \ 655 && ../configure --srcdir=.. --prefix="$$dc_install_base" \ 656 $(DISTCHECK_CONFIGURE_FLAGS) \ 657 && $(MAKE) $(AM_MAKEFLAGS) \ 658 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 659 && $(MAKE) $(AM_MAKEFLAGS) check \ 660 && $(MAKE) $(AM_MAKEFLAGS) install \ 661 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 662 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 663 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 664 distuninstallcheck \ 665 && chmod -R a-w "$$dc_install_base" \ 666 && ({ \ 667 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 668 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 669 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 670 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 671 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 672 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 673 && rm -rf "$$dc_destdir" \ 674 && $(MAKE) $(AM_MAKEFLAGS) dist \ 675 && rm -rf $(DIST_ARCHIVES) \ 676 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 677 && cd "$$am__cwd" \ 678 || exit 1 679 $(am__remove_distdir) 680 @(echo "$(distdir) archives ready for distribution: "; \ 681 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 682 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 683distuninstallcheck: 684 @$(am__cd) '$(distuninstallcheck_dir)' \ 685 && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ 686 || { echo "ERROR: files left after uninstall:" ; \ 687 if test -n "$(DESTDIR)"; then \ 688 echo " (check DESTDIR support)"; \ 689 fi ; \ 690 $(distuninstallcheck_listfiles) ; \ 691 exit 1; } >&2 692distcleancheck: distclean 693 @if test '$(srcdir)' = . ; then \ 694 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 695 exit 1 ; \ 696 fi 697 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 698 || { echo "ERROR: files left in build directory after distclean:" ; \ 699 $(distcleancheck_listfiles) ; \ 700 exit 1; } >&2 701check-am: all-am 702check: check-recursive 703all-am: Makefile $(DATA) config.h 704installdirs: installdirs-recursive 705installdirs-am: 706 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ 707 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 708 done 709install: install-recursive 710install-exec: install-exec-recursive 711install-data: install-data-recursive 712uninstall: uninstall-recursive 713 714install-am: all-am 715 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 716 717installcheck: installcheck-recursive 718install-strip: 719 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 720 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 721 `test -z '$(STRIP)' || \ 722 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 723mostlyclean-generic: 724 725clean-generic: 726 727distclean-generic: 728 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 729 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 730 731maintainer-clean-generic: 732 @echo "This command is intended for maintainers to use" 733 @echo "it deletes files that may require special tools to rebuild." 734 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 735clean: clean-recursive 736 737clean-am: clean-generic clean-libtool mostlyclean-am 738 739distclean: distclean-recursive 740 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 741 -rm -f Makefile 742distclean-am: clean-am distclean-generic distclean-hdr \ 743 distclean-libtool distclean-tags 744 745dvi: dvi-recursive 746 747dvi-am: 748 749html: html-recursive 750 751html-am: 752 753info: info-recursive 754 755info-am: 756 757install-data-am: install-pkgconfigDATA 758 759install-dvi: install-dvi-recursive 760 761install-dvi-am: 762 763install-exec-am: 764 765install-html: install-html-recursive 766 767install-html-am: 768 769install-info: install-info-recursive 770 771install-info-am: 772 773install-man: 774 775install-pdf: install-pdf-recursive 776 777install-pdf-am: 778 779install-ps: install-ps-recursive 780 781install-ps-am: 782 783installcheck-am: 784 785maintainer-clean: maintainer-clean-recursive 786 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 787 -rm -rf $(top_srcdir)/autom4te.cache 788 -rm -f Makefile 789maintainer-clean-am: distclean-am maintainer-clean-generic 790 791mostlyclean: mostlyclean-recursive 792 793mostlyclean-am: mostlyclean-generic mostlyclean-libtool 794 795pdf: pdf-recursive 796 797pdf-am: 798 799ps: ps-recursive 800 801ps-am: 802 803uninstall-am: uninstall-pkgconfigDATA 804 805.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ 806 ctags-recursive install-am install-strip tags-recursive 807 808.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 809 all all-am am--refresh check check-am clean clean-generic \ 810 clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ 811 dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \ 812 dist-zip distcheck distclean distclean-generic distclean-hdr \ 813 distclean-libtool distclean-tags distcleancheck distdir \ 814 distuninstallcheck dvi dvi-am html html-am info info-am \ 815 install install-am install-data install-data-am install-dvi \ 816 install-dvi-am install-exec install-exec-am install-html \ 817 install-html-am install-info install-info-am install-man \ 818 install-pdf install-pdf-am install-pkgconfigDATA install-ps \ 819 install-ps-am install-strip installcheck installcheck-am \ 820 installdirs installdirs-am maintainer-clean \ 821 maintainer-clean-generic mostlyclean mostlyclean-generic \ 822 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ 823 uninstall uninstall-am uninstall-pkgconfigDATA 824 825 826@LINT_TRUE@lint: 827@LINT_TRUE@ (cd src && $(MAKE) $(MFLAGS) lint) 828 829.PHONY: ChangeLog INSTALL 830 831INSTALL: 832 $(INSTALL_CMD) 833 834ChangeLog: 835 $(CHANGELOG_CMD) 836 837dist-hook: ChangeLog INSTALL 838 839# Tell versions [3.59,3.63) of GNU make to not export all variables. 840# Otherwise a system limit (for SysV at least) may be exceeded. 841.NOEXPORT: 842