Makefile.in revision cdce750a 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#
18#  Copyright © 2003 Keith Packard, Noah Levitt
19#
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Keith Packard not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Keith Packard makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29#
30#  KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112subdir = .
113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
114am__aclocal_m4_deps = $(top_srcdir)/configure.ac
115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
116	$(ACLOCAL_M4)
117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
118	$(am__configure_deps) $(am__DIST_COMMON)
119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
120 configure.lineno config.status.lineno
121mkinstalldirs = $(install_sh) -d
122CONFIG_HEADER = config.h $(top_builddir)/include/X11/Xcursor/Xcursor.h
123CONFIG_CLEAN_FILES = xcursor.pc
124CONFIG_CLEAN_VPATH_FILES =
125AM_V_P = $(am__v_P_@AM_V@)
126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
127am__v_P_0 = false
128am__v_P_1 = :
129AM_V_GEN = $(am__v_GEN_@AM_V@)
130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
131am__v_GEN_0 = @echo "  GEN     " $@;
132am__v_GEN_1 = 
133AM_V_at = $(am__v_at_@AM_V@)
134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
135am__v_at_0 = @
136am__v_at_1 = 
137SOURCES =
138DIST_SOURCES =
139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
140	ctags-recursive dvi-recursive html-recursive info-recursive \
141	install-data-recursive install-dvi-recursive \
142	install-exec-recursive install-html-recursive \
143	install-info-recursive install-pdf-recursive \
144	install-ps-recursive install-recursive installcheck-recursive \
145	installdirs-recursive pdf-recursive ps-recursive \
146	tags-recursive uninstall-recursive
147am__can_run_installinfo = \
148  case $$AM_UPDATE_INFO_DIR in \
149    n|no|NO) false;; \
150    *) (install-info --version) >/dev/null 2>&1;; \
151  esac
152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
153am__vpath_adj = case $$p in \
154    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
155    *) f=$$p;; \
156  esac;
157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
158am__install_max = 40
159am__nobase_strip_setup = \
160  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
161am__nobase_strip = \
162  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
163am__nobase_list = $(am__nobase_strip_setup); \
164  for p in $$list; do echo "$$p $$p"; done | \
165  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
166  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
167    if (++n[$$2] == $(am__install_max)) \
168      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
169    END { for (dir in files) print dir, files[dir] }'
170am__base_list = \
171  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
172  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
173am__uninstall_files_from_dir = { \
174  test -z "$$files" \
175    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
176    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
177         $(am__cd) "$$dir" && rm -f $$files; }; \
178  }
179am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
180DATA = $(pkgconfig_DATA)
181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
182  distclean-recursive maintainer-clean-recursive
183am__recursive_targets = \
184  $(RECURSIVE_TARGETS) \
185  $(RECURSIVE_CLEAN_TARGETS) \
186  $(am__extra_recursive_targets)
187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
188	cscope distdir dist dist-all distcheck
189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
190	$(LISP)config.h.in
191# Read a list of newline-separated strings from the standard input,
192# and print each of them once, without duplicates.  Input order is
193# *not* preserved.
194am__uniquify_input = $(AWK) '\
195  BEGIN { nonempty = 0; } \
196  { items[$$0] = 1; nonempty = 1; } \
197  END { if (nonempty) { for (i in items) print i; }; } \
198'
199# Make sure the list of sources is unique.  This is necessary because,
200# e.g., the same source file might be shared among _SOURCES variables
201# for different programs/libraries.
202am__define_uniq_tagged_files = \
203  list='$(am__tagged_files)'; \
204  unique=`for i in $$list; do \
205    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
206  done | $(am__uniquify_input)`
207ETAGS = etags
208CTAGS = ctags
209CSCOPE = cscope
210DIST_SUBDIRS = $(SUBDIRS)
211am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
212	$(srcdir)/xcursor.pc.in \
213	$(top_srcdir)/include/X11/Xcursor/Xcursor.h.in AUTHORS COPYING \
214	ChangeLog INSTALL compile config.guess config.sub install-sh \
215	ltmain.sh missing
216DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
217distdir = $(PACKAGE)-$(VERSION)
218top_distdir = $(distdir)
219am__remove_distdir = \
220  if test -d "$(distdir)"; then \
221    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
222      && rm -rf "$(distdir)" \
223      || { sleep 5 && rm -rf "$(distdir)"; }; \
224  else :; fi
225am__post_remove_distdir = $(am__remove_distdir)
226am__relativize = \
227  dir0=`pwd`; \
228  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
229  sed_rest='s,^[^/]*/*,,'; \
230  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
231  sed_butlast='s,/*[^/]*$$,,'; \
232  while test -n "$$dir1"; do \
233    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
234    if test "$$first" != "."; then \
235      if test "$$first" = ".."; then \
236        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
237        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
238      else \
239        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
240        if test "$$first2" = "$$first"; then \
241          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
242        else \
243          dir2="../$$dir2"; \
244        fi; \
245        dir0="$$dir0"/"$$first"; \
246      fi; \
247    fi; \
248    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
249  done; \
250  reldir="$$dir2"
251DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
252GZIP_ENV = --best
253DIST_TARGETS = dist-bzip2 dist-gzip
254distuninstallcheck_listfiles = find . -type f -print
255am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
256  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
257distcleancheck_listfiles = find . -type f -print
258ACLOCAL = @ACLOCAL@
259ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
260ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
261AMTAR = @AMTAR@
262AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
263APP_MAN_DIR = @APP_MAN_DIR@
264APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
265AR = @AR@
266AUTOCONF = @AUTOCONF@
267AUTOHEADER = @AUTOHEADER@
268AUTOMAKE = @AUTOMAKE@
269AWK = @AWK@
270BASE_CFLAGS = @BASE_CFLAGS@
271CC = @CC@
272CCDEPMODE = @CCDEPMODE@
273CFLAGS = @CFLAGS@
274CHANGELOG_CMD = @CHANGELOG_CMD@
275CPP = @CPP@
276CPPFLAGS = @CPPFLAGS@
277CWARNFLAGS = @CWARNFLAGS@
278CYGPATH_W = @CYGPATH_W@
279DEFS = @DEFS@
280DEPDIR = @DEPDIR@
281DLLTOOL = @DLLTOOL@
282DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
283DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
284DSYMUTIL = @DSYMUTIL@
285DUMPBIN = @DUMPBIN@
286ECHO_C = @ECHO_C@
287ECHO_N = @ECHO_N@
288ECHO_T = @ECHO_T@
289EGREP = @EGREP@
290EXEEXT = @EXEEXT@
291FGREP = @FGREP@
292FILE_MAN_DIR = @FILE_MAN_DIR@
293FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
294GREP = @GREP@
295ICONDIR = @ICONDIR@
296INSTALL = @INSTALL@
297INSTALL_CMD = @INSTALL_CMD@
298INSTALL_DATA = @INSTALL_DATA@
299INSTALL_PROGRAM = @INSTALL_PROGRAM@
300INSTALL_SCRIPT = @INSTALL_SCRIPT@
301INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
302LD = @LD@
303LDFLAGS = @LDFLAGS@
304LIBOBJS = @LIBOBJS@
305LIBS = @LIBS@
306LIBTOOL = @LIBTOOL@
307LIB_MAN_DIR = @LIB_MAN_DIR@
308LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
309LINT = @LINT@
310LINT_FLAGS = @LINT_FLAGS@
311LIPO = @LIPO@
312LN_S = @LN_S@
313LTLIBOBJS = @LTLIBOBJS@
314LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
315MAKEINFO = @MAKEINFO@
316MANIFEST_TOOL = @MANIFEST_TOOL@
317MAN_SUBSTS = @MAN_SUBSTS@
318MISC_MAN_DIR = @MISC_MAN_DIR@
319MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
320MKDIR_P = @MKDIR_P@
321NM = @NM@
322NMEDIT = @NMEDIT@
323OBJDUMP = @OBJDUMP@
324OBJEXT = @OBJEXT@
325OTOOL = @OTOOL@
326OTOOL64 = @OTOOL64@
327PACKAGE = @PACKAGE@
328PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
329PACKAGE_NAME = @PACKAGE_NAME@
330PACKAGE_STRING = @PACKAGE_STRING@
331PACKAGE_TARNAME = @PACKAGE_TARNAME@
332PACKAGE_URL = @PACKAGE_URL@
333PACKAGE_VERSION = @PACKAGE_VERSION@
334PATH_SEPARATOR = @PATH_SEPARATOR@
335PKG_CONFIG = @PKG_CONFIG@
336PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
337PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
338RANLIB = @RANLIB@
339SED = @SED@
340SET_MAKE = @SET_MAKE@
341SHELL = @SHELL@
342STRICT_CFLAGS = @STRICT_CFLAGS@
343STRIP = @STRIP@
344VERSION = @VERSION@
345XCURSORPATH = @XCURSORPATH@
346XCURSOR_CFLAGS = @XCURSOR_CFLAGS@
347XCURSOR_LIBS = @XCURSOR_LIBS@
348XORG_MAN_PAGE = @XORG_MAN_PAGE@
349abs_builddir = @abs_builddir@
350abs_srcdir = @abs_srcdir@
351abs_top_builddir = @abs_top_builddir@
352abs_top_srcdir = @abs_top_srcdir@
353ac_ct_AR = @ac_ct_AR@
354ac_ct_CC = @ac_ct_CC@
355ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
356am__include = @am__include@
357am__leading_dot = @am__leading_dot@
358am__quote = @am__quote@
359am__tar = @am__tar@
360am__untar = @am__untar@
361bindir = @bindir@
362build = @build@
363build_alias = @build_alias@
364build_cpu = @build_cpu@
365build_os = @build_os@
366build_vendor = @build_vendor@
367builddir = @builddir@
368datadir = @datadir@
369datarootdir = @datarootdir@
370docdir = @docdir@
371dvidir = @dvidir@
372exec_prefix = @exec_prefix@
373host = @host@
374host_alias = @host_alias@
375host_cpu = @host_cpu@
376host_os = @host_os@
377host_vendor = @host_vendor@
378htmldir = @htmldir@
379includedir = @includedir@
380infodir = @infodir@
381install_sh = @install_sh@
382libdir = @libdir@
383libexecdir = @libexecdir@
384localedir = @localedir@
385localstatedir = @localstatedir@
386mandir = @mandir@
387mkdir_p = @mkdir_p@
388oldincludedir = @oldincludedir@
389pdfdir = @pdfdir@
390prefix = @prefix@
391program_transform_name = @program_transform_name@
392psdir = @psdir@
393sbindir = @sbindir@
394sharedstatedir = @sharedstatedir@
395srcdir = @srcdir@
396sysconfdir = @sysconfdir@
397target_alias = @target_alias@
398top_build_prefix = @top_build_prefix@
399top_builddir = @top_builddir@
400top_srcdir = @top_srcdir@
401SUBDIRS = src man
402AM_CFLAGS = $(XRENDER_CFLAGS) $(XFIXES_CFLAGS) $(X_CFLAGS)
403pkgconfigdir = $(libdir)/pkgconfig
404pkgconfig_DATA = xcursor.pc
405MAINTAINERCLEANFILES = ChangeLog INSTALL
406EXTRA_DIST = README.md
407all: config.h
408	$(MAKE) $(AM_MAKEFLAGS) all-recursive
409
410.SUFFIXES:
411am--refresh: Makefile
412	@:
413$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
414	@for dep in $?; do \
415	  case '$(am__configure_deps)' in \
416	    *$$dep*) \
417	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
418	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
419		&& exit 0; \
420	      exit 1;; \
421	  esac; \
422	done; \
423	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
424	$(am__cd) $(top_srcdir) && \
425	  $(AUTOMAKE) --foreign Makefile
426Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
427	@case '$?' in \
428	  *config.status*) \
429	    echo ' $(SHELL) ./config.status'; \
430	    $(SHELL) ./config.status;; \
431	  *) \
432	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
433	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
434	esac;
435
436$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
437	$(SHELL) ./config.status --recheck
438
439$(top_srcdir)/configure:  $(am__configure_deps)
440	$(am__cd) $(srcdir) && $(AUTOCONF)
441$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
442	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
443$(am__aclocal_m4_deps):
444
445config.h: stamp-h1
446	@test -f $@ || rm -f stamp-h1
447	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
448
449stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
450	@rm -f stamp-h1
451	cd $(top_builddir) && $(SHELL) ./config.status config.h
452$(srcdir)/config.h.in:  $(am__configure_deps) 
453	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
454	rm -f stamp-h1
455	touch $@
456
457include/X11/Xcursor/Xcursor.h: include/X11/Xcursor/stamp-h2
458	@test -f $@ || rm -f include/X11/Xcursor/stamp-h2
459	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/X11/Xcursor/stamp-h2
460
461include/X11/Xcursor/stamp-h2: $(top_srcdir)/include/X11/Xcursor/Xcursor.h.in $(top_builddir)/config.status
462	@rm -f include/X11/Xcursor/stamp-h2
463	cd $(top_builddir) && $(SHELL) ./config.status include/X11/Xcursor/Xcursor.h
464
465distclean-hdr:
466	-rm -f config.h stamp-h1 include/X11/Xcursor/Xcursor.h include/X11/Xcursor/stamp-h2
467xcursor.pc: $(top_builddir)/config.status $(srcdir)/xcursor.pc.in
468	cd $(top_builddir) && $(SHELL) ./config.status $@
469
470mostlyclean-libtool:
471	-rm -f *.lo
472
473clean-libtool:
474	-rm -rf .libs _libs
475
476distclean-libtool:
477	-rm -f libtool config.lt
478install-pkgconfigDATA: $(pkgconfig_DATA)
479	@$(NORMAL_INSTALL)
480	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
481	if test -n "$$list"; then \
482	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
483	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
484	fi; \
485	for p in $$list; do \
486	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
487	  echo "$$d$$p"; \
488	done | $(am__base_list) | \
489	while read files; do \
490	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
491	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
492	done
493
494uninstall-pkgconfigDATA:
495	@$(NORMAL_UNINSTALL)
496	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
497	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
498	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
499
500# This directory's subdirectories are mostly independent; you can cd
501# into them and run 'make' without going through this Makefile.
502# To change the values of 'make' variables: instead of editing Makefiles,
503# (1) if the variable is set in 'config.status', edit 'config.status'
504#     (which will cause the Makefiles to be regenerated when you run 'make');
505# (2) otherwise, pass the desired values on the 'make' command line.
506$(am__recursive_targets):
507	@fail=; \
508	if $(am__make_keepgoing); then \
509	  failcom='fail=yes'; \
510	else \
511	  failcom='exit 1'; \
512	fi; \
513	dot_seen=no; \
514	target=`echo $@ | sed s/-recursive//`; \
515	case "$@" in \
516	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
517	  *) list='$(SUBDIRS)' ;; \
518	esac; \
519	for subdir in $$list; do \
520	  echo "Making $$target in $$subdir"; \
521	  if test "$$subdir" = "."; then \
522	    dot_seen=yes; \
523	    local_target="$$target-am"; \
524	  else \
525	    local_target="$$target"; \
526	  fi; \
527	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
528	  || eval $$failcom; \
529	done; \
530	if test "$$dot_seen" = "no"; then \
531	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
532	fi; test -z "$$fail"
533
534ID: $(am__tagged_files)
535	$(am__define_uniq_tagged_files); mkid -fID $$unique
536tags: tags-recursive
537TAGS: tags
538
539tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
540	set x; \
541	here=`pwd`; \
542	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
543	  include_option=--etags-include; \
544	  empty_fix=.; \
545	else \
546	  include_option=--include; \
547	  empty_fix=; \
548	fi; \
549	list='$(SUBDIRS)'; for subdir in $$list; do \
550	  if test "$$subdir" = .; then :; else \
551	    test ! -f $$subdir/TAGS || \
552	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
553	  fi; \
554	done; \
555	$(am__define_uniq_tagged_files); \
556	shift; \
557	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
558	  test -n "$$unique" || unique=$$empty_fix; \
559	  if test $$# -gt 0; then \
560	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
561	      "$$@" $$unique; \
562	  else \
563	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
564	      $$unique; \
565	  fi; \
566	fi
567ctags: ctags-recursive
568
569CTAGS: ctags
570ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
571	$(am__define_uniq_tagged_files); \
572	test -z "$(CTAGS_ARGS)$$unique" \
573	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
574	     $$unique
575
576GTAGS:
577	here=`$(am__cd) $(top_builddir) && pwd` \
578	  && $(am__cd) $(top_srcdir) \
579	  && gtags -i $(GTAGS_ARGS) "$$here"
580cscope: cscope.files
581	test ! -s cscope.files \
582	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
583clean-cscope:
584	-rm -f cscope.files
585cscope.files: clean-cscope cscopelist
586cscopelist: cscopelist-recursive
587
588cscopelist-am: $(am__tagged_files)
589	list='$(am__tagged_files)'; \
590	case "$(srcdir)" in \
591	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
592	  *) sdir=$(subdir)/$(srcdir) ;; \
593	esac; \
594	for i in $$list; do \
595	  if test -f "$$i"; then \
596	    echo "$(subdir)/$$i"; \
597	  else \
598	    echo "$$sdir/$$i"; \
599	  fi; \
600	done >> $(top_builddir)/cscope.files
601
602distclean-tags:
603	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
604	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
605
606distdir: $(DISTFILES)
607	$(am__remove_distdir)
608	test -d "$(distdir)" || mkdir "$(distdir)"
609	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
610	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
611	list='$(DISTFILES)'; \
612	  dist_files=`for file in $$list; do echo $$file; done | \
613	  sed -e "s|^$$srcdirstrip/||;t" \
614	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
615	case $$dist_files in \
616	  */*) $(MKDIR_P) `echo "$$dist_files" | \
617			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
618			   sort -u` ;; \
619	esac; \
620	for file in $$dist_files; do \
621	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
622	  if test -d $$d/$$file; then \
623	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
624	    if test -d "$(distdir)/$$file"; then \
625	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
626	    fi; \
627	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
628	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
629	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
630	    fi; \
631	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
632	  else \
633	    test -f "$(distdir)/$$file" \
634	    || cp -p $$d/$$file "$(distdir)/$$file" \
635	    || exit 1; \
636	  fi; \
637	done
638	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
639	  if test "$$subdir" = .; then :; else \
640	    $(am__make_dryrun) \
641	      || test -d "$(distdir)/$$subdir" \
642	      || $(MKDIR_P) "$(distdir)/$$subdir" \
643	      || exit 1; \
644	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
645	    $(am__relativize); \
646	    new_distdir=$$reldir; \
647	    dir1=$$subdir; dir2="$(top_distdir)"; \
648	    $(am__relativize); \
649	    new_top_distdir=$$reldir; \
650	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
651	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
652	    ($(am__cd) $$subdir && \
653	      $(MAKE) $(AM_MAKEFLAGS) \
654	        top_distdir="$$new_top_distdir" \
655	        distdir="$$new_distdir" \
656		am__remove_distdir=: \
657		am__skip_length_check=: \
658		am__skip_mode_fix=: \
659	        distdir) \
660	      || exit 1; \
661	  fi; \
662	done
663	$(MAKE) $(AM_MAKEFLAGS) \
664	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
665	  dist-hook
666	-test -n "$(am__skip_mode_fix)" \
667	|| find "$(distdir)" -type d ! -perm -755 \
668		-exec chmod u+rwx,go+rx {} \; -o \
669	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
670	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
671	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
672	|| chmod -R a+r "$(distdir)"
673dist-gzip: distdir
674	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
675	$(am__post_remove_distdir)
676dist-bzip2: distdir
677	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
678	$(am__post_remove_distdir)
679
680dist-lzip: distdir
681	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
682	$(am__post_remove_distdir)
683
684dist-xz: distdir
685	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
686	$(am__post_remove_distdir)
687
688dist-tarZ: distdir
689	@echo WARNING: "Support for distribution archives compressed with" \
690		       "legacy program 'compress' is deprecated." >&2
691	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
692	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
693	$(am__post_remove_distdir)
694
695dist-shar: distdir
696	@echo WARNING: "Support for shar distribution archives is" \
697	               "deprecated." >&2
698	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
699	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
700	$(am__post_remove_distdir)
701
702dist-zip: distdir
703	-rm -f $(distdir).zip
704	zip -rq $(distdir).zip $(distdir)
705	$(am__post_remove_distdir)
706
707dist dist-all:
708	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
709	$(am__post_remove_distdir)
710
711# This target untars the dist file and tries a VPATH configuration.  Then
712# it guarantees that the distribution is self-contained by making another
713# tarfile.
714distcheck: dist
715	case '$(DIST_ARCHIVES)' in \
716	*.tar.gz*) \
717	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
718	*.tar.bz2*) \
719	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
720	*.tar.lz*) \
721	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
722	*.tar.xz*) \
723	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
724	*.tar.Z*) \
725	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
726	*.shar.gz*) \
727	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
728	*.zip*) \
729	  unzip $(distdir).zip ;;\
730	esac
731	chmod -R a-w $(distdir)
732	chmod u+w $(distdir)
733	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
734	chmod a-w $(distdir)
735	test -d $(distdir)/_build || exit 0; \
736	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
737	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
738	  && am__cwd=`pwd` \
739	  && $(am__cd) $(distdir)/_build/sub \
740	  && ../../configure \
741	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
742	    $(DISTCHECK_CONFIGURE_FLAGS) \
743	    --srcdir=../.. --prefix="$$dc_install_base" \
744	  && $(MAKE) $(AM_MAKEFLAGS) \
745	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
746	  && $(MAKE) $(AM_MAKEFLAGS) check \
747	  && $(MAKE) $(AM_MAKEFLAGS) install \
748	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
749	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
750	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
751	        distuninstallcheck \
752	  && chmod -R a-w "$$dc_install_base" \
753	  && ({ \
754	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
755	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
756	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
757	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
758	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
759	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
760	  && rm -rf "$$dc_destdir" \
761	  && $(MAKE) $(AM_MAKEFLAGS) dist \
762	  && rm -rf $(DIST_ARCHIVES) \
763	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
764	  && cd "$$am__cwd" \
765	  || exit 1
766	$(am__post_remove_distdir)
767	@(echo "$(distdir) archives ready for distribution: "; \
768	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
769	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
770distuninstallcheck:
771	@test -n '$(distuninstallcheck_dir)' || { \
772	  echo 'ERROR: trying to run $@ with an empty' \
773	       '$$(distuninstallcheck_dir)' >&2; \
774	  exit 1; \
775	}; \
776	$(am__cd) '$(distuninstallcheck_dir)' || { \
777	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
778	  exit 1; \
779	}; \
780	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
781	   || { echo "ERROR: files left after uninstall:" ; \
782	        if test -n "$(DESTDIR)"; then \
783	          echo "  (check DESTDIR support)"; \
784	        fi ; \
785	        $(distuninstallcheck_listfiles) ; \
786	        exit 1; } >&2
787distcleancheck: distclean
788	@if test '$(srcdir)' = . ; then \
789	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
790	  exit 1 ; \
791	fi
792	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
793	  || { echo "ERROR: files left in build directory after distclean:" ; \
794	       $(distcleancheck_listfiles) ; \
795	       exit 1; } >&2
796check-am: all-am
797check: check-recursive
798all-am: Makefile $(DATA) config.h
799installdirs: installdirs-recursive
800installdirs-am:
801	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
802	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
803	done
804install: install-recursive
805install-exec: install-exec-recursive
806install-data: install-data-recursive
807uninstall: uninstall-recursive
808
809install-am: all-am
810	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
811
812installcheck: installcheck-recursive
813install-strip:
814	if test -z '$(STRIP)'; then \
815	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
816	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
817	      install; \
818	else \
819	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
820	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
821	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
822	fi
823mostlyclean-generic:
824
825clean-generic:
826
827distclean-generic:
828	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
829	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
830
831maintainer-clean-generic:
832	@echo "This command is intended for maintainers to use"
833	@echo "it deletes files that may require special tools to rebuild."
834	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
835clean: clean-recursive
836
837clean-am: clean-generic clean-libtool mostlyclean-am
838
839distclean: distclean-recursive
840	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
841	-rm -f Makefile
842distclean-am: clean-am distclean-generic distclean-hdr \
843	distclean-libtool distclean-tags
844
845dvi: dvi-recursive
846
847dvi-am:
848
849html: html-recursive
850
851html-am:
852
853info: info-recursive
854
855info-am:
856
857install-data-am: install-pkgconfigDATA
858
859install-dvi: install-dvi-recursive
860
861install-dvi-am:
862
863install-exec-am:
864
865install-html: install-html-recursive
866
867install-html-am:
868
869install-info: install-info-recursive
870
871install-info-am:
872
873install-man:
874
875install-pdf: install-pdf-recursive
876
877install-pdf-am:
878
879install-ps: install-ps-recursive
880
881install-ps-am:
882
883installcheck-am:
884
885maintainer-clean: maintainer-clean-recursive
886	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
887	-rm -rf $(top_srcdir)/autom4te.cache
888	-rm -f Makefile
889maintainer-clean-am: distclean-am maintainer-clean-generic
890
891mostlyclean: mostlyclean-recursive
892
893mostlyclean-am: mostlyclean-generic mostlyclean-libtool
894
895pdf: pdf-recursive
896
897pdf-am:
898
899ps: ps-recursive
900
901ps-am:
902
903uninstall-am: uninstall-pkgconfigDATA
904
905.MAKE: $(am__recursive_targets) all install-am install-strip
906
907.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
908	am--refresh check check-am clean clean-cscope clean-generic \
909	clean-libtool cscope cscopelist-am ctags ctags-am dist \
910	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
911	dist-tarZ dist-xz dist-zip distcheck distclean \
912	distclean-generic distclean-hdr distclean-libtool \
913	distclean-tags distcleancheck distdir distuninstallcheck dvi \
914	dvi-am html html-am info info-am install install-am \
915	install-data install-data-am install-dvi install-dvi-am \
916	install-exec install-exec-am install-html install-html-am \
917	install-info install-info-am install-man install-pdf \
918	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
919	install-strip installcheck installcheck-am installdirs \
920	installdirs-am maintainer-clean maintainer-clean-generic \
921	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
922	ps ps-am tags tags-am uninstall uninstall-am \
923	uninstall-pkgconfigDATA
924
925.PRECIOUS: Makefile
926
927
928@LINT_TRUE@lint:
929@LINT_TRUE@	(cd src && $(MAKE) $(MFLAGS) lint)
930
931.PHONY: ChangeLog INSTALL
932
933INSTALL:
934	$(INSTALL_CMD)
935
936ChangeLog:
937	$(CHANGELOG_CMD)
938
939dist-hook: ChangeLog INSTALL
940
941# Tell versions [3.59,3.63) of GNU make to not export all variables.
942# Otherwise a system limit (for SysV at least) may be exceeded.
943.NOEXPORT:
944