Makefile.in revision 6fc0178d 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17
18
19VPATH = @srcdir@
20am__is_gnu_make = { \
21  if test -z '$(MAKELEVEL)'; then \
22    false; \
23  elif test -n '$(MAKE_HOST)'; then \
24    true; \
25  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
26    true; \
27  else \
28    false; \
29  fi; \
30}
31am__make_running_with_option = \
32  case $${target_option-} in \
33      ?) ;; \
34      *) echo "am__make_running_with_option: internal error: invalid" \
35              "target option '$${target_option-}' specified" >&2; \
36         exit 1;; \
37  esac; \
38  has_opt=no; \
39  sane_makeflags=$$MAKEFLAGS; \
40  if $(am__is_gnu_make); then \
41    sane_makeflags=$$MFLAGS; \
42  else \
43    case $$MAKEFLAGS in \
44      *\\[\ \	]*) \
45        bs=\\; \
46        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
47          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
48    esac; \
49  fi; \
50  skip_next=no; \
51  strip_trailopt () \
52  { \
53    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
54  }; \
55  for flg in $$sane_makeflags; do \
56    test $$skip_next = yes && { skip_next=no; continue; }; \
57    case $$flg in \
58      *=*|--*) continue;; \
59        -*I) strip_trailopt 'I'; skip_next=yes;; \
60      -*I?*) strip_trailopt 'I';; \
61        -*O) strip_trailopt 'O'; skip_next=yes;; \
62      -*O?*) strip_trailopt 'O';; \
63        -*l) strip_trailopt 'l'; skip_next=yes;; \
64      -*l?*) strip_trailopt 'l';; \
65      -[dEDm]) skip_next=yes;; \
66      -[JT]) skip_next=yes;; \
67    esac; \
68    case $$flg in \
69      *$$target_option*) has_opt=yes; break;; \
70    esac; \
71  done; \
72  test $$has_opt = yes
73am__make_dryrun = (target_option=n; $(am__make_running_with_option))
74am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
75pkgdatadir = $(datadir)/@PACKAGE@
76pkgincludedir = $(includedir)/@PACKAGE@
77pkglibdir = $(libdir)/@PACKAGE@
78pkglibexecdir = $(libexecdir)/@PACKAGE@
79am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
80install_sh_DATA = $(install_sh) -c -m 644
81install_sh_PROGRAM = $(install_sh) -c
82install_sh_SCRIPT = $(install_sh) -c
83INSTALL_HEADER = $(INSTALL_DATA)
84transform = $(program_transform_name)
85NORMAL_INSTALL = :
86PRE_INSTALL = :
87POST_INSTALL = :
88NORMAL_UNINSTALL = :
89PRE_UNINSTALL = :
90POST_UNINSTALL = :
91build_triplet = @build@
92host_triplet = @host@
93subdir = .
94ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
95am__aclocal_m4_deps = $(top_srcdir)/configure.ac
96am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97	$(ACLOCAL_M4)
98DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
99	$(am__configure_deps) $(xdmcpinclude_HEADERS) \
100	$(am__DIST_COMMON)
101am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
102 configure.lineno config.status.lineno
103mkinstalldirs = $(install_sh) -d
104CONFIG_HEADER = config.h
105CONFIG_CLEAN_FILES = xdmcp.pc
106CONFIG_CLEAN_VPATH_FILES =
107am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
108am__vpath_adj = case $$p in \
109    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
110    *) f=$$p;; \
111  esac;
112am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
113am__install_max = 40
114am__nobase_strip_setup = \
115  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
116am__nobase_strip = \
117  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
118am__nobase_list = $(am__nobase_strip_setup); \
119  for p in $$list; do echo "$$p $$p"; done | \
120  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
121  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
122    if (++n[$$2] == $(am__install_max)) \
123      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
124    END { for (dir in files) print dir, files[dir] }'
125am__base_list = \
126  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
127  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
128am__uninstall_files_from_dir = { \
129  test -z "$$files" \
130    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
131    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
132         $(am__cd) "$$dir" && rm -f $$files; }; \
133  }
134am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(lintlibdir)" \
135	"$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xdmcpincludedir)"
136LTLIBRARIES = $(lib_LTLIBRARIES)
137am__DEPENDENCIES_1 =
138libXdmcp_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
139am_libXdmcp_la_OBJECTS = Array.lo Fill.lo Flush.lo Key.lo Read.lo \
140	Unwrap.lo Wrap.lo Write.lo
141@HASXDMAUTH_TRUE@nodist_libXdmcp_la_OBJECTS = Wraphelp.lo
142libXdmcp_la_OBJECTS = $(am_libXdmcp_la_OBJECTS) \
143	$(nodist_libXdmcp_la_OBJECTS)
144AM_V_lt = $(am__v_lt_@AM_V@)
145am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
146am__v_lt_0 = --silent
147am__v_lt_1 = 
148libXdmcp_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
149	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
150	$(libXdmcp_la_LDFLAGS) $(LDFLAGS) -o $@
151AM_V_P = $(am__v_P_@AM_V@)
152am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
153am__v_P_0 = false
154am__v_P_1 = :
155AM_V_GEN = $(am__v_GEN_@AM_V@)
156am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
157am__v_GEN_0 = @echo "  GEN     " $@;
158am__v_GEN_1 = 
159AM_V_at = $(am__v_at_@AM_V@)
160am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
161am__v_at_0 = @
162am__v_at_1 = 
163DEFAULT_INCLUDES = -I.@am__isrc@
164depcomp = $(SHELL) $(top_srcdir)/depcomp
165am__depfiles_maybe = depfiles
166am__mv = mv -f
167COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
168	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
169LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
170	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
171	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
172	$(AM_CFLAGS) $(CFLAGS)
173AM_V_CC = $(am__v_CC_@AM_V@)
174am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
175am__v_CC_0 = @echo "  CC      " $@;
176am__v_CC_1 = 
177CCLD = $(CC)
178LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
179	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
180	$(AM_LDFLAGS) $(LDFLAGS) -o $@
181AM_V_CCLD = $(am__v_CCLD_@AM_V@)
182am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
183am__v_CCLD_0 = @echo "  CCLD    " $@;
184am__v_CCLD_1 = 
185SOURCES = $(libXdmcp_la_SOURCES) $(nodist_libXdmcp_la_SOURCES)
186DIST_SOURCES = $(libXdmcp_la_SOURCES)
187RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
188	ctags-recursive dvi-recursive html-recursive info-recursive \
189	install-data-recursive install-dvi-recursive \
190	install-exec-recursive install-html-recursive \
191	install-info-recursive install-pdf-recursive \
192	install-ps-recursive install-recursive installcheck-recursive \
193	installdirs-recursive pdf-recursive ps-recursive \
194	tags-recursive uninstall-recursive
195am__can_run_installinfo = \
196  case $$AM_UPDATE_INFO_DIR in \
197    n|no|NO) false;; \
198    *) (install-info --version) >/dev/null 2>&1;; \
199  esac
200DATA = $(lintlib_DATA) $(pkgconfig_DATA)
201HEADERS = $(xdmcpinclude_HEADERS)
202RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
203  distclean-recursive maintainer-clean-recursive
204am__recursive_targets = \
205  $(RECURSIVE_TARGETS) \
206  $(RECURSIVE_CLEAN_TARGETS) \
207  $(am__extra_recursive_targets)
208AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
209	cscope distdir dist dist-all distcheck
210am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
211	$(LISP)config.h.in
212# Read a list of newline-separated strings from the standard input,
213# and print each of them once, without duplicates.  Input order is
214# *not* preserved.
215am__uniquify_input = $(AWK) '\
216  BEGIN { nonempty = 0; } \
217  { items[$$0] = 1; nonempty = 1; } \
218  END { if (nonempty) { for (i in items) print i; }; } \
219'
220# Make sure the list of sources is unique.  This is necessary because,
221# e.g., the same source file might be shared among _SOURCES variables
222# for different programs/libraries.
223am__define_uniq_tagged_files = \
224  list='$(am__tagged_files)'; \
225  unique=`for i in $$list; do \
226    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
227  done | $(am__uniquify_input)`
228ETAGS = etags
229CTAGS = ctags
230CSCOPE = cscope
231DIST_SUBDIRS = $(SUBDIRS)
232am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
233	$(srcdir)/xdmcp.pc.in AUTHORS COPYING ChangeLog INSTALL \
234	compile config.guess config.sub depcomp install-sh ltmain.sh \
235	missing
236DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
237distdir = $(PACKAGE)-$(VERSION)
238top_distdir = $(distdir)
239am__remove_distdir = \
240  if test -d "$(distdir)"; then \
241    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
242      && rm -rf "$(distdir)" \
243      || { sleep 5 && rm -rf "$(distdir)"; }; \
244  else :; fi
245am__post_remove_distdir = $(am__remove_distdir)
246am__relativize = \
247  dir0=`pwd`; \
248  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
249  sed_rest='s,^[^/]*/*,,'; \
250  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
251  sed_butlast='s,/*[^/]*$$,,'; \
252  while test -n "$$dir1"; do \
253    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
254    if test "$$first" != "."; then \
255      if test "$$first" = ".."; then \
256        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
257        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
258      else \
259        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
260        if test "$$first2" = "$$first"; then \
261          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
262        else \
263          dir2="../$$dir2"; \
264        fi; \
265        dir0="$$dir0"/"$$first"; \
266      fi; \
267    fi; \
268    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
269  done; \
270  reldir="$$dir2"
271DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
272GZIP_ENV = --best
273DIST_TARGETS = dist-bzip2 dist-gzip
274distuninstallcheck_listfiles = find . -type f -print
275am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
276  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
277distcleancheck_listfiles = find . -type f -print
278ACLOCAL = @ACLOCAL@
279ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
280ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
281AMTAR = @AMTAR@
282AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
283APP_MAN_DIR = @APP_MAN_DIR@
284APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
285AR = @AR@
286AS = @AS@
287AUTOCONF = @AUTOCONF@
288AUTOHEADER = @AUTOHEADER@
289AUTOMAKE = @AUTOMAKE@
290AWK = @AWK@
291BASE_CFLAGS = @BASE_CFLAGS@
292CC = @CC@
293CCDEPMODE = @CCDEPMODE@
294CFLAGS = @CFLAGS@
295CHANGELOG_CMD = @CHANGELOG_CMD@
296CPP = @CPP@
297CPPFLAGS = @CPPFLAGS@
298CWARNFLAGS = @CWARNFLAGS@
299CYGPATH_W = @CYGPATH_W@
300DEFS = @DEFS@
301DEPDIR = @DEPDIR@
302DLLTOOL = @DLLTOOL@
303DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
304DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
305DSYMUTIL = @DSYMUTIL@
306DUMPBIN = @DUMPBIN@
307ECHO_C = @ECHO_C@
308ECHO_N = @ECHO_N@
309ECHO_T = @ECHO_T@
310EGREP = @EGREP@
311EXEEXT = @EXEEXT@
312FGREP = @FGREP@
313FILE_MAN_DIR = @FILE_MAN_DIR@
314FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
315FOP = @FOP@
316GREP = @GREP@
317INSTALL = @INSTALL@
318INSTALL_CMD = @INSTALL_CMD@
319INSTALL_DATA = @INSTALL_DATA@
320INSTALL_PROGRAM = @INSTALL_PROGRAM@
321INSTALL_SCRIPT = @INSTALL_SCRIPT@
322INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
323LD = @LD@
324LDFLAGS = @LDFLAGS@
325LIBOBJS = @LIBOBJS@
326LIBS = @LIBS@
327LIBTOOL = @LIBTOOL@
328LIB_MAN_DIR = @LIB_MAN_DIR@
329LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
330LINT = @LINT@
331LINTLIB = @LINTLIB@
332LINT_FLAGS = @LINT_FLAGS@
333LIPO = @LIPO@
334LN_S = @LN_S@
335LTLIBOBJS = @LTLIBOBJS@
336LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
337MAKEINFO = @MAKEINFO@
338MANIFEST_TOOL = @MANIFEST_TOOL@
339MAN_SUBSTS = @MAN_SUBSTS@
340MISC_MAN_DIR = @MISC_MAN_DIR@
341MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
342MKDIR_P = @MKDIR_P@
343NM = @NM@
344NMEDIT = @NMEDIT@
345OBJDUMP = @OBJDUMP@
346OBJEXT = @OBJEXT@
347OTOOL = @OTOOL@
348OTOOL64 = @OTOOL64@
349PACKAGE = @PACKAGE@
350PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
351PACKAGE_NAME = @PACKAGE_NAME@
352PACKAGE_STRING = @PACKAGE_STRING@
353PACKAGE_TARNAME = @PACKAGE_TARNAME@
354PACKAGE_URL = @PACKAGE_URL@
355PACKAGE_VERSION = @PACKAGE_VERSION@
356PATH_SEPARATOR = @PATH_SEPARATOR@
357PKG_CONFIG = @PKG_CONFIG@
358PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
359PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
360RANLIB = @RANLIB@
361SED = @SED@
362SET_MAKE = @SET_MAKE@
363SHELL = @SHELL@
364STRICT_CFLAGS = @STRICT_CFLAGS@
365STRIP = @STRIP@
366STYLESHEET_SRCDIR = @STYLESHEET_SRCDIR@
367VERSION = @VERSION@
368XDMCP_CFLAGS = @XDMCP_CFLAGS@
369XDMCP_LIBS = @XDMCP_LIBS@
370XMLTO = @XMLTO@
371XORG_MALLOC_DEBUG_ENV = @XORG_MALLOC_DEBUG_ENV@
372XORG_MAN_PAGE = @XORG_MAN_PAGE@
373XORG_SGML_PATH = @XORG_SGML_PATH@
374XSLTPROC = @XSLTPROC@
375XSL_STYLESHEET = @XSL_STYLESHEET@
376abs_builddir = @abs_builddir@
377abs_srcdir = @abs_srcdir@
378abs_top_builddir = @abs_top_builddir@
379abs_top_srcdir = @abs_top_srcdir@
380ac_ct_AR = @ac_ct_AR@
381ac_ct_CC = @ac_ct_CC@
382ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
383am__include = @am__include@
384am__leading_dot = @am__leading_dot@
385am__quote = @am__quote@
386am__tar = @am__tar@
387am__untar = @am__untar@
388bindir = @bindir@
389build = @build@
390build_alias = @build_alias@
391build_cpu = @build_cpu@
392build_os = @build_os@
393build_vendor = @build_vendor@
394builddir = @builddir@
395datadir = @datadir@
396datarootdir = @datarootdir@
397docdir = @docdir@
398dvidir = @dvidir@
399exec_prefix = @exec_prefix@
400host = @host@
401host_alias = @host_alias@
402host_cpu = @host_cpu@
403host_os = @host_os@
404host_vendor = @host_vendor@
405htmldir = @htmldir@
406includedir = @includedir@
407infodir = @infodir@
408install_sh = @install_sh@
409libdir = @libdir@
410libexecdir = @libexecdir@
411localedir = @localedir@
412localstatedir = @localstatedir@
413mandir = @mandir@
414mkdir_p = @mkdir_p@
415oldincludedir = @oldincludedir@
416pdfdir = @pdfdir@
417prefix = @prefix@
418program_transform_name = @program_transform_name@
419psdir = @psdir@
420sbindir = @sbindir@
421sharedstatedir = @sharedstatedir@
422srcdir = @srcdir@
423sysconfdir = @sysconfdir@
424target_alias = @target_alias@
425top_build_prefix = @top_build_prefix@
426top_builddir = @top_builddir@
427top_srcdir = @top_srcdir@
428SUBDIRS = doc . test
429lib_LTLIBRARIES = libXdmcp.la
430AM_CPPFLAGS = -I${top_srcdir}/include
431AM_CFLAGS = \
432	$(XDMCP_CFLAGS) \
433	$(CWARNFLAGS)
434
435libXdmcp_la_LDFLAGS = -version-number 6:0:0 -no-undefined
436libXdmcp_la_LIBADD = $(XDMCP_LIBS)
437libXdmcp_la_SOURCES = \
438	Array.c \
439	Fill.c \
440	Flush.c \
441	Key.c \
442	Read.c \
443	Unwrap.c \
444	Wrap.c \
445	Wrap.h \
446	Write.c
447
448@HASXDMAUTH_TRUE@nodist_libXdmcp_la_SOURCES = Wraphelp.c
449xdmcpincludedir = $(includedir)/X11
450xdmcpinclude_HEADERS = \
451	include/X11/Xdmcp.h
452
453pkgconfigdir = $(libdir)/pkgconfig
454pkgconfig_DATA = xdmcp.pc
455MAINTAINERCLEANFILES = ChangeLog INSTALL
456EXTRA_DIST = autogen.sh Wraphelp.c Wraphelp.README.crypto README.md
457@LINT_TRUE@ALL_LINT_FLAGS = $(LINT_FLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
458@LINT_TRUE@		$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS)
459
460@MAKE_LINT_LIB_TRUE@lintlibdir = $(libdir)
461@MAKE_LINT_LIB_TRUE@lintlib_DATA = $(LINTLIB)
462CLEANFILES = $(lintlib_DATA)
463all: config.h
464	$(MAKE) $(AM_MAKEFLAGS) all-recursive
465
466.SUFFIXES:
467.SUFFIXES: .c .lo .o .obj
468am--refresh: Makefile
469	@:
470$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
471	@for dep in $?; do \
472	  case '$(am__configure_deps)' in \
473	    *$$dep*) \
474	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
475	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
476		&& exit 0; \
477	      exit 1;; \
478	  esac; \
479	done; \
480	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
481	$(am__cd) $(top_srcdir) && \
482	  $(AUTOMAKE) --foreign Makefile
483Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
484	@case '$?' in \
485	  *config.status*) \
486	    echo ' $(SHELL) ./config.status'; \
487	    $(SHELL) ./config.status;; \
488	  *) \
489	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
490	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
491	esac;
492
493$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
494	$(SHELL) ./config.status --recheck
495
496$(top_srcdir)/configure:  $(am__configure_deps)
497	$(am__cd) $(srcdir) && $(AUTOCONF)
498$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
499	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
500$(am__aclocal_m4_deps):
501
502config.h: stamp-h1
503	@test -f $@ || rm -f stamp-h1
504	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
505
506stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
507	@rm -f stamp-h1
508	cd $(top_builddir) && $(SHELL) ./config.status config.h
509$(srcdir)/config.h.in:  $(am__configure_deps) 
510	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
511	rm -f stamp-h1
512	touch $@
513
514distclean-hdr:
515	-rm -f config.h stamp-h1
516xdmcp.pc: $(top_builddir)/config.status $(srcdir)/xdmcp.pc.in
517	cd $(top_builddir) && $(SHELL) ./config.status $@
518
519install-libLTLIBRARIES: $(lib_LTLIBRARIES)
520	@$(NORMAL_INSTALL)
521	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
522	list2=; for p in $$list; do \
523	  if test -f $$p; then \
524	    list2="$$list2 $$p"; \
525	  else :; fi; \
526	done; \
527	test -z "$$list2" || { \
528	  echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
529	  $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
530	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
531	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
532	}
533
534uninstall-libLTLIBRARIES:
535	@$(NORMAL_UNINSTALL)
536	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
537	for p in $$list; do \
538	  $(am__strip_dir) \
539	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
540	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
541	done
542
543clean-libLTLIBRARIES:
544	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
545	@list='$(lib_LTLIBRARIES)'; \
546	locs=`for p in $$list; do echo $$p; done | \
547	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
548	      sort -u`; \
549	test -z "$$locs" || { \
550	  echo rm -f $${locs}; \
551	  rm -f $${locs}; \
552	}
553
554libXdmcp.la: $(libXdmcp_la_OBJECTS) $(libXdmcp_la_DEPENDENCIES) $(EXTRA_libXdmcp_la_DEPENDENCIES) 
555	$(AM_V_CCLD)$(libXdmcp_la_LINK) -rpath $(libdir) $(libXdmcp_la_OBJECTS) $(libXdmcp_la_LIBADD) $(LIBS)
556
557mostlyclean-compile:
558	-rm -f *.$(OBJEXT)
559
560distclean-compile:
561	-rm -f *.tab.c
562
563@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Array.Plo@am__quote@
564@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Fill.Plo@am__quote@
565@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Flush.Plo@am__quote@
566@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Key.Plo@am__quote@
567@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Read.Plo@am__quote@
568@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Unwrap.Plo@am__quote@
569@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Wrap.Plo@am__quote@
570@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Wraphelp.Plo@am__quote@
571@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Write.Plo@am__quote@
572
573.c.o:
574@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
575@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
576@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
577@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
578@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
579
580.c.obj:
581@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
582@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
583@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
584@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
585@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
586
587.c.lo:
588@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
589@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
590@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
591@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
592@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
593
594mostlyclean-libtool:
595	-rm -f *.lo
596
597clean-libtool:
598	-rm -rf .libs _libs
599
600distclean-libtool:
601	-rm -f libtool config.lt
602install-lintlibDATA: $(lintlib_DATA)
603	@$(NORMAL_INSTALL)
604	@list='$(lintlib_DATA)'; test -n "$(lintlibdir)" || list=; \
605	if test -n "$$list"; then \
606	  echo " $(MKDIR_P) '$(DESTDIR)$(lintlibdir)'"; \
607	  $(MKDIR_P) "$(DESTDIR)$(lintlibdir)" || exit 1; \
608	fi; \
609	for p in $$list; do \
610	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
611	  echo "$$d$$p"; \
612	done | $(am__base_list) | \
613	while read files; do \
614	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(lintlibdir)'"; \
615	  $(INSTALL_DATA) $$files "$(DESTDIR)$(lintlibdir)" || exit $$?; \
616	done
617
618uninstall-lintlibDATA:
619	@$(NORMAL_UNINSTALL)
620	@list='$(lintlib_DATA)'; test -n "$(lintlibdir)" || list=; \
621	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
622	dir='$(DESTDIR)$(lintlibdir)'; $(am__uninstall_files_from_dir)
623install-pkgconfigDATA: $(pkgconfig_DATA)
624	@$(NORMAL_INSTALL)
625	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
626	if test -n "$$list"; then \
627	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
628	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
629	fi; \
630	for p in $$list; do \
631	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
632	  echo "$$d$$p"; \
633	done | $(am__base_list) | \
634	while read files; do \
635	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
636	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
637	done
638
639uninstall-pkgconfigDATA:
640	@$(NORMAL_UNINSTALL)
641	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
642	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
643	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
644install-xdmcpincludeHEADERS: $(xdmcpinclude_HEADERS)
645	@$(NORMAL_INSTALL)
646	@list='$(xdmcpinclude_HEADERS)'; test -n "$(xdmcpincludedir)" || list=; \
647	if test -n "$$list"; then \
648	  echo " $(MKDIR_P) '$(DESTDIR)$(xdmcpincludedir)'"; \
649	  $(MKDIR_P) "$(DESTDIR)$(xdmcpincludedir)" || exit 1; \
650	fi; \
651	for p in $$list; do \
652	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
653	  echo "$$d$$p"; \
654	done | $(am__base_list) | \
655	while read files; do \
656	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(xdmcpincludedir)'"; \
657	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(xdmcpincludedir)" || exit $$?; \
658	done
659
660uninstall-xdmcpincludeHEADERS:
661	@$(NORMAL_UNINSTALL)
662	@list='$(xdmcpinclude_HEADERS)'; test -n "$(xdmcpincludedir)" || list=; \
663	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
664	dir='$(DESTDIR)$(xdmcpincludedir)'; $(am__uninstall_files_from_dir)
665
666# This directory's subdirectories are mostly independent; you can cd
667# into them and run 'make' without going through this Makefile.
668# To change the values of 'make' variables: instead of editing Makefiles,
669# (1) if the variable is set in 'config.status', edit 'config.status'
670#     (which will cause the Makefiles to be regenerated when you run 'make');
671# (2) otherwise, pass the desired values on the 'make' command line.
672$(am__recursive_targets):
673	@fail=; \
674	if $(am__make_keepgoing); then \
675	  failcom='fail=yes'; \
676	else \
677	  failcom='exit 1'; \
678	fi; \
679	dot_seen=no; \
680	target=`echo $@ | sed s/-recursive//`; \
681	case "$@" in \
682	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
683	  *) list='$(SUBDIRS)' ;; \
684	esac; \
685	for subdir in $$list; do \
686	  echo "Making $$target in $$subdir"; \
687	  if test "$$subdir" = "."; then \
688	    dot_seen=yes; \
689	    local_target="$$target-am"; \
690	  else \
691	    local_target="$$target"; \
692	  fi; \
693	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
694	  || eval $$failcom; \
695	done; \
696	if test "$$dot_seen" = "no"; then \
697	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
698	fi; test -z "$$fail"
699
700ID: $(am__tagged_files)
701	$(am__define_uniq_tagged_files); mkid -fID $$unique
702tags: tags-recursive
703TAGS: tags
704
705tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
706	set x; \
707	here=`pwd`; \
708	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
709	  include_option=--etags-include; \
710	  empty_fix=.; \
711	else \
712	  include_option=--include; \
713	  empty_fix=; \
714	fi; \
715	list='$(SUBDIRS)'; for subdir in $$list; do \
716	  if test "$$subdir" = .; then :; else \
717	    test ! -f $$subdir/TAGS || \
718	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
719	  fi; \
720	done; \
721	$(am__define_uniq_tagged_files); \
722	shift; \
723	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
724	  test -n "$$unique" || unique=$$empty_fix; \
725	  if test $$# -gt 0; then \
726	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
727	      "$$@" $$unique; \
728	  else \
729	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
730	      $$unique; \
731	  fi; \
732	fi
733ctags: ctags-recursive
734
735CTAGS: ctags
736ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
737	$(am__define_uniq_tagged_files); \
738	test -z "$(CTAGS_ARGS)$$unique" \
739	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
740	     $$unique
741
742GTAGS:
743	here=`$(am__cd) $(top_builddir) && pwd` \
744	  && $(am__cd) $(top_srcdir) \
745	  && gtags -i $(GTAGS_ARGS) "$$here"
746cscope: cscope.files
747	test ! -s cscope.files \
748	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
749clean-cscope:
750	-rm -f cscope.files
751cscope.files: clean-cscope cscopelist
752cscopelist: cscopelist-recursive
753
754cscopelist-am: $(am__tagged_files)
755	list='$(am__tagged_files)'; \
756	case "$(srcdir)" in \
757	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
758	  *) sdir=$(subdir)/$(srcdir) ;; \
759	esac; \
760	for i in $$list; do \
761	  if test -f "$$i"; then \
762	    echo "$(subdir)/$$i"; \
763	  else \
764	    echo "$$sdir/$$i"; \
765	  fi; \
766	done >> $(top_builddir)/cscope.files
767
768distclean-tags:
769	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
770	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
771
772distdir: $(DISTFILES)
773	$(am__remove_distdir)
774	test -d "$(distdir)" || mkdir "$(distdir)"
775	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
776	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
777	list='$(DISTFILES)'; \
778	  dist_files=`for file in $$list; do echo $$file; done | \
779	  sed -e "s|^$$srcdirstrip/||;t" \
780	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
781	case $$dist_files in \
782	  */*) $(MKDIR_P) `echo "$$dist_files" | \
783			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
784			   sort -u` ;; \
785	esac; \
786	for file in $$dist_files; do \
787	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
788	  if test -d $$d/$$file; then \
789	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
790	    if test -d "$(distdir)/$$file"; then \
791	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
792	    fi; \
793	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
794	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
795	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
796	    fi; \
797	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
798	  else \
799	    test -f "$(distdir)/$$file" \
800	    || cp -p $$d/$$file "$(distdir)/$$file" \
801	    || exit 1; \
802	  fi; \
803	done
804	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
805	  if test "$$subdir" = .; then :; else \
806	    $(am__make_dryrun) \
807	      || test -d "$(distdir)/$$subdir" \
808	      || $(MKDIR_P) "$(distdir)/$$subdir" \
809	      || exit 1; \
810	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
811	    $(am__relativize); \
812	    new_distdir=$$reldir; \
813	    dir1=$$subdir; dir2="$(top_distdir)"; \
814	    $(am__relativize); \
815	    new_top_distdir=$$reldir; \
816	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
817	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
818	    ($(am__cd) $$subdir && \
819	      $(MAKE) $(AM_MAKEFLAGS) \
820	        top_distdir="$$new_top_distdir" \
821	        distdir="$$new_distdir" \
822		am__remove_distdir=: \
823		am__skip_length_check=: \
824		am__skip_mode_fix=: \
825	        distdir) \
826	      || exit 1; \
827	  fi; \
828	done
829	$(MAKE) $(AM_MAKEFLAGS) \
830	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
831	  dist-hook
832	-test -n "$(am__skip_mode_fix)" \
833	|| find "$(distdir)" -type d ! -perm -755 \
834		-exec chmod u+rwx,go+rx {} \; -o \
835	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
836	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
837	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
838	|| chmod -R a+r "$(distdir)"
839dist-gzip: distdir
840	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
841	$(am__post_remove_distdir)
842dist-bzip2: distdir
843	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
844	$(am__post_remove_distdir)
845
846dist-lzip: distdir
847	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
848	$(am__post_remove_distdir)
849
850dist-xz: distdir
851	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
852	$(am__post_remove_distdir)
853
854dist-tarZ: distdir
855	@echo WARNING: "Support for distribution archives compressed with" \
856		       "legacy program 'compress' is deprecated." >&2
857	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
858	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
859	$(am__post_remove_distdir)
860
861dist-shar: distdir
862	@echo WARNING: "Support for shar distribution archives is" \
863	               "deprecated." >&2
864	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
865	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
866	$(am__post_remove_distdir)
867
868dist-zip: distdir
869	-rm -f $(distdir).zip
870	zip -rq $(distdir).zip $(distdir)
871	$(am__post_remove_distdir)
872
873dist dist-all:
874	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
875	$(am__post_remove_distdir)
876
877# This target untars the dist file and tries a VPATH configuration.  Then
878# it guarantees that the distribution is self-contained by making another
879# tarfile.
880distcheck: dist
881	case '$(DIST_ARCHIVES)' in \
882	*.tar.gz*) \
883	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
884	*.tar.bz2*) \
885	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
886	*.tar.lz*) \
887	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
888	*.tar.xz*) \
889	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
890	*.tar.Z*) \
891	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
892	*.shar.gz*) \
893	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
894	*.zip*) \
895	  unzip $(distdir).zip ;;\
896	esac
897	chmod -R a-w $(distdir)
898	chmod u+w $(distdir)
899	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
900	chmod a-w $(distdir)
901	test -d $(distdir)/_build || exit 0; \
902	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
903	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
904	  && am__cwd=`pwd` \
905	  && $(am__cd) $(distdir)/_build/sub \
906	  && ../../configure \
907	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
908	    $(DISTCHECK_CONFIGURE_FLAGS) \
909	    --srcdir=../.. --prefix="$$dc_install_base" \
910	  && $(MAKE) $(AM_MAKEFLAGS) \
911	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
912	  && $(MAKE) $(AM_MAKEFLAGS) check \
913	  && $(MAKE) $(AM_MAKEFLAGS) install \
914	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
915	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
916	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
917	        distuninstallcheck \
918	  && chmod -R a-w "$$dc_install_base" \
919	  && ({ \
920	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
921	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
922	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
923	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
924	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
925	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
926	  && rm -rf "$$dc_destdir" \
927	  && $(MAKE) $(AM_MAKEFLAGS) dist \
928	  && rm -rf $(DIST_ARCHIVES) \
929	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
930	  && cd "$$am__cwd" \
931	  || exit 1
932	$(am__post_remove_distdir)
933	@(echo "$(distdir) archives ready for distribution: "; \
934	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
935	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
936distuninstallcheck:
937	@test -n '$(distuninstallcheck_dir)' || { \
938	  echo 'ERROR: trying to run $@ with an empty' \
939	       '$$(distuninstallcheck_dir)' >&2; \
940	  exit 1; \
941	}; \
942	$(am__cd) '$(distuninstallcheck_dir)' || { \
943	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
944	  exit 1; \
945	}; \
946	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
947	   || { echo "ERROR: files left after uninstall:" ; \
948	        if test -n "$(DESTDIR)"; then \
949	          echo "  (check DESTDIR support)"; \
950	        fi ; \
951	        $(distuninstallcheck_listfiles) ; \
952	        exit 1; } >&2
953distcleancheck: distclean
954	@if test '$(srcdir)' = . ; then \
955	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
956	  exit 1 ; \
957	fi
958	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
959	  || { echo "ERROR: files left in build directory after distclean:" ; \
960	       $(distcleancheck_listfiles) ; \
961	       exit 1; } >&2
962check-am: all-am
963check: check-recursive
964all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS) config.h
965installdirs: installdirs-recursive
966installdirs-am:
967	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(lintlibdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xdmcpincludedir)"; do \
968	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
969	done
970install: install-recursive
971install-exec: install-exec-recursive
972install-data: install-data-recursive
973uninstall: uninstall-recursive
974
975install-am: all-am
976	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
977
978installcheck: installcheck-recursive
979install-strip:
980	if test -z '$(STRIP)'; then \
981	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
982	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
983	      install; \
984	else \
985	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
986	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
987	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
988	fi
989mostlyclean-generic:
990
991clean-generic:
992	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
993
994distclean-generic:
995	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
996	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
997
998maintainer-clean-generic:
999	@echo "This command is intended for maintainers to use"
1000	@echo "it deletes files that may require special tools to rebuild."
1001	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
1002clean: clean-recursive
1003
1004clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
1005	mostlyclean-am
1006
1007distclean: distclean-recursive
1008	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1009	-rm -rf ./$(DEPDIR)
1010	-rm -f Makefile
1011distclean-am: clean-am distclean-compile distclean-generic \
1012	distclean-hdr distclean-libtool distclean-tags
1013
1014dvi: dvi-recursive
1015
1016dvi-am:
1017
1018html: html-recursive
1019
1020html-am:
1021
1022info: info-recursive
1023
1024info-am:
1025
1026install-data-am: install-lintlibDATA install-pkgconfigDATA \
1027	install-xdmcpincludeHEADERS
1028
1029install-dvi: install-dvi-recursive
1030
1031install-dvi-am:
1032
1033install-exec-am: install-libLTLIBRARIES
1034
1035install-html: install-html-recursive
1036
1037install-html-am:
1038
1039install-info: install-info-recursive
1040
1041install-info-am:
1042
1043install-man:
1044
1045install-pdf: install-pdf-recursive
1046
1047install-pdf-am:
1048
1049install-ps: install-ps-recursive
1050
1051install-ps-am:
1052
1053installcheck-am:
1054
1055maintainer-clean: maintainer-clean-recursive
1056	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
1057	-rm -rf $(top_srcdir)/autom4te.cache
1058	-rm -rf ./$(DEPDIR)
1059	-rm -f Makefile
1060maintainer-clean-am: distclean-am maintainer-clean-generic
1061
1062mostlyclean: mostlyclean-recursive
1063
1064mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1065	mostlyclean-libtool
1066
1067pdf: pdf-recursive
1068
1069pdf-am:
1070
1071ps: ps-recursive
1072
1073ps-am:
1074
1075uninstall-am: uninstall-libLTLIBRARIES uninstall-lintlibDATA \
1076	uninstall-pkgconfigDATA uninstall-xdmcpincludeHEADERS
1077
1078.MAKE: $(am__recursive_targets) all install-am install-strip
1079
1080.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1081	am--refresh check check-am clean clean-cscope clean-generic \
1082	clean-libLTLIBRARIES clean-libtool cscope cscopelist-am ctags \
1083	ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \
1084	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
1085	distclean distclean-compile distclean-generic distclean-hdr \
1086	distclean-libtool distclean-tags distcleancheck distdir \
1087	distuninstallcheck dvi dvi-am html html-am info info-am \
1088	install install-am install-data install-data-am install-dvi \
1089	install-dvi-am install-exec install-exec-am install-html \
1090	install-html-am install-info install-info-am \
1091	install-libLTLIBRARIES install-lintlibDATA install-man \
1092	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
1093	install-ps-am install-strip install-xdmcpincludeHEADERS \
1094	installcheck installcheck-am installdirs installdirs-am \
1095	maintainer-clean maintainer-clean-generic mostlyclean \
1096	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
1097	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
1098	uninstall-libLTLIBRARIES uninstall-lintlibDATA \
1099	uninstall-pkgconfigDATA uninstall-xdmcpincludeHEADERS
1100
1101.PRECIOUS: Makefile
1102
1103
1104@LINT_TRUE@lint:
1105@LINT_TRUE@	$(LINT) $(ALL_LINT_FLAGS) $(libXdmcp_la_SOURCES) $(nodist_libXdmcp_la_SOURCES) $(LIBS) $(XDMCP_LIBS)
1106
1107@MAKE_LINT_LIB_TRUE@$(LINTLIB): $(libXdmcp_la_SOURCES) $(nodist_libXdmcp_la_SOURCES)
1108@MAKE_LINT_LIB_TRUE@	$(LINT) -y -oXdmcp -x $(ALL_LINT_FLAGS) $(libXdmcp_la_SOURCES) $(nodist_libXdmcp_la_SOURCES)
1109
1110.PHONY: ChangeLog INSTALL
1111
1112INSTALL:
1113	$(INSTALL_CMD)
1114
1115ChangeLog:
1116	$(CHANGELOG_CMD)
1117
1118dist-hook: ChangeLog INSTALL
1119
1120# Tell versions [3.59,3.63) of GNU make to not export all variables.
1121# Otherwise a system limit (for SysV at least) may be exceeded.
1122.NOEXPORT:
1123