Makefile.in revision 52fd71cd 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#
18#  Copyright 2005  Red Hat, Inc.
19#
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29#
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112subdir = .
113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
114am__aclocal_m4_deps = $(top_srcdir)/configure.ac
115am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
116	$(ACLOCAL_M4)
117DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
118	$(am__configure_deps) $(am__DIST_COMMON)
119am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
120 configure.lineno config.status.lineno
121mkinstalldirs = $(install_sh) -d
122CONFIG_HEADER = config.h
123CONFIG_CLEAN_FILES = fontenc.pc
124CONFIG_CLEAN_VPATH_FILES =
125AM_V_P = $(am__v_P_@AM_V@)
126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
127am__v_P_0 = false
128am__v_P_1 = :
129AM_V_GEN = $(am__v_GEN_@AM_V@)
130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
131am__v_GEN_0 = @echo "  GEN     " $@;
132am__v_GEN_1 = 
133AM_V_at = $(am__v_at_@AM_V@)
134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
135am__v_at_0 = @
136am__v_at_1 = 
137SOURCES =
138DIST_SOURCES =
139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
140	ctags-recursive dvi-recursive html-recursive info-recursive \
141	install-data-recursive install-dvi-recursive \
142	install-exec-recursive install-html-recursive \
143	install-info-recursive install-pdf-recursive \
144	install-ps-recursive install-recursive installcheck-recursive \
145	installdirs-recursive pdf-recursive ps-recursive \
146	tags-recursive uninstall-recursive
147am__can_run_installinfo = \
148  case $$AM_UPDATE_INFO_DIR in \
149    n|no|NO) false;; \
150    *) (install-info --version) >/dev/null 2>&1;; \
151  esac
152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
153am__vpath_adj = case $$p in \
154    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
155    *) f=$$p;; \
156  esac;
157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
158am__install_max = 40
159am__nobase_strip_setup = \
160  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
161am__nobase_strip = \
162  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
163am__nobase_list = $(am__nobase_strip_setup); \
164  for p in $$list; do echo "$$p $$p"; done | \
165  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
166  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
167    if (++n[$$2] == $(am__install_max)) \
168      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
169    END { for (dir in files) print dir, files[dir] }'
170am__base_list = \
171  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
172  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
173am__uninstall_files_from_dir = { \
174  test -z "$$files" \
175    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
176    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
177         $(am__cd) "$$dir" && rm -f $$files; }; \
178  }
179am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
180DATA = $(pkgconfig_DATA)
181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
182  distclean-recursive maintainer-clean-recursive
183am__recursive_targets = \
184  $(RECURSIVE_TARGETS) \
185  $(RECURSIVE_CLEAN_TARGETS) \
186  $(am__extra_recursive_targets)
187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
188	cscope distdir dist dist-all distcheck
189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
190	$(LISP)config.h.in
191# Read a list of newline-separated strings from the standard input,
192# and print each of them once, without duplicates.  Input order is
193# *not* preserved.
194am__uniquify_input = $(AWK) '\
195  BEGIN { nonempty = 0; } \
196  { items[$$0] = 1; nonempty = 1; } \
197  END { if (nonempty) { for (i in items) print i; }; } \
198'
199# Make sure the list of sources is unique.  This is necessary because,
200# e.g., the same source file might be shared among _SOURCES variables
201# for different programs/libraries.
202am__define_uniq_tagged_files = \
203  list='$(am__tagged_files)'; \
204  unique=`for i in $$list; do \
205    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
206  done | $(am__uniquify_input)`
207ETAGS = etags
208CTAGS = ctags
209CSCOPE = cscope
210DIST_SUBDIRS = $(SUBDIRS)
211am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
212	$(srcdir)/fontenc.pc.in COPYING ChangeLog INSTALL compile \
213	config.guess config.sub install-sh ltmain.sh missing
214DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
215distdir = $(PACKAGE)-$(VERSION)
216top_distdir = $(distdir)
217am__remove_distdir = \
218  if test -d "$(distdir)"; then \
219    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
220      && rm -rf "$(distdir)" \
221      || { sleep 5 && rm -rf "$(distdir)"; }; \
222  else :; fi
223am__post_remove_distdir = $(am__remove_distdir)
224am__relativize = \
225  dir0=`pwd`; \
226  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
227  sed_rest='s,^[^/]*/*,,'; \
228  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
229  sed_butlast='s,/*[^/]*$$,,'; \
230  while test -n "$$dir1"; do \
231    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
232    if test "$$first" != "."; then \
233      if test "$$first" = ".."; then \
234        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
235        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
236      else \
237        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
238        if test "$$first2" = "$$first"; then \
239          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
240        else \
241          dir2="../$$dir2"; \
242        fi; \
243        dir0="$$dir0"/"$$first"; \
244      fi; \
245    fi; \
246    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
247  done; \
248  reldir="$$dir2"
249DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
250GZIP_ENV = --best
251DIST_TARGETS = dist-bzip2 dist-gzip
252distuninstallcheck_listfiles = find . -type f -print
253am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
254  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
255distcleancheck_listfiles = find . -type f -print
256ACLOCAL = @ACLOCAL@
257ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
258ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
259AMTAR = @AMTAR@
260AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
261APP_MAN_DIR = @APP_MAN_DIR@
262APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
263AR = @AR@
264AUTOCONF = @AUTOCONF@
265AUTOHEADER = @AUTOHEADER@
266AUTOMAKE = @AUTOMAKE@
267AWK = @AWK@
268BASE_CFLAGS = @BASE_CFLAGS@
269CC = @CC@
270CCDEPMODE = @CCDEPMODE@
271CFLAGS = @CFLAGS@
272CHANGELOG_CMD = @CHANGELOG_CMD@
273CPP = @CPP@
274CPPFLAGS = @CPPFLAGS@
275CWARNFLAGS = @CWARNFLAGS@
276CYGPATH_W = @CYGPATH_W@
277DEFS = @DEFS@
278DEPDIR = @DEPDIR@
279DLLTOOL = @DLLTOOL@
280DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
281DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
282DSYMUTIL = @DSYMUTIL@
283DUMPBIN = @DUMPBIN@
284ECHO_C = @ECHO_C@
285ECHO_N = @ECHO_N@
286ECHO_T = @ECHO_T@
287EGREP = @EGREP@
288ENCODINGSDIR = @ENCODINGSDIR@
289EXEEXT = @EXEEXT@
290FGREP = @FGREP@
291FILE_MAN_DIR = @FILE_MAN_DIR@
292FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
293FONTENC_CFLAGS = @FONTENC_CFLAGS@
294FONTENC_LIBS = @FONTENC_LIBS@
295FONTROOTDIR = @FONTROOTDIR@
296GREP = @GREP@
297INSTALL = @INSTALL@
298INSTALL_CMD = @INSTALL_CMD@
299INSTALL_DATA = @INSTALL_DATA@
300INSTALL_PROGRAM = @INSTALL_PROGRAM@
301INSTALL_SCRIPT = @INSTALL_SCRIPT@
302INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
303LD = @LD@
304LDFLAGS = @LDFLAGS@
305LIBOBJS = @LIBOBJS@
306LIBS = @LIBS@
307LIBTOOL = @LIBTOOL@
308LIB_MAN_DIR = @LIB_MAN_DIR@
309LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
310LINT = @LINT@
311LINT_FLAGS = @LINT_FLAGS@
312LIPO = @LIPO@
313LN_S = @LN_S@
314LTLIBOBJS = @LTLIBOBJS@
315LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
316MAKEINFO = @MAKEINFO@
317MANIFEST_TOOL = @MANIFEST_TOOL@
318MAN_SUBSTS = @MAN_SUBSTS@
319MISC_MAN_DIR = @MISC_MAN_DIR@
320MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
321MKDIR_P = @MKDIR_P@
322NM = @NM@
323NMEDIT = @NMEDIT@
324OBJDUMP = @OBJDUMP@
325OBJEXT = @OBJEXT@
326OTOOL = @OTOOL@
327OTOOL64 = @OTOOL64@
328PACKAGE = @PACKAGE@
329PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
330PACKAGE_NAME = @PACKAGE_NAME@
331PACKAGE_STRING = @PACKAGE_STRING@
332PACKAGE_TARNAME = @PACKAGE_TARNAME@
333PACKAGE_URL = @PACKAGE_URL@
334PACKAGE_VERSION = @PACKAGE_VERSION@
335PATH_SEPARATOR = @PATH_SEPARATOR@
336PKG_CONFIG = @PKG_CONFIG@
337PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
338PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
339RANLIB = @RANLIB@
340SED = @SED@
341SET_MAKE = @SET_MAKE@
342SHELL = @SHELL@
343STRICT_CFLAGS = @STRICT_CFLAGS@
344STRIP = @STRIP@
345VERSION = @VERSION@
346XORG_MAN_PAGE = @XORG_MAN_PAGE@
347abs_builddir = @abs_builddir@
348abs_srcdir = @abs_srcdir@
349abs_top_builddir = @abs_top_builddir@
350abs_top_srcdir = @abs_top_srcdir@
351ac_ct_AR = @ac_ct_AR@
352ac_ct_CC = @ac_ct_CC@
353ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
354am__include = @am__include@
355am__leading_dot = @am__leading_dot@
356am__quote = @am__quote@
357am__tar = @am__tar@
358am__untar = @am__untar@
359bindir = @bindir@
360build = @build@
361build_alias = @build_alias@
362build_cpu = @build_cpu@
363build_os = @build_os@
364build_vendor = @build_vendor@
365builddir = @builddir@
366datadir = @datadir@
367datarootdir = @datarootdir@
368docdir = @docdir@
369dvidir = @dvidir@
370exec_prefix = @exec_prefix@
371host = @host@
372host_alias = @host_alias@
373host_cpu = @host_cpu@
374host_os = @host_os@
375host_vendor = @host_vendor@
376htmldir = @htmldir@
377includedir = @includedir@
378infodir = @infodir@
379install_sh = @install_sh@
380libdir = @libdir@
381libexecdir = @libexecdir@
382localedir = @localedir@
383localstatedir = @localstatedir@
384mandir = @mandir@
385mkdir_p = @mkdir_p@
386oldincludedir = @oldincludedir@
387pdfdir = @pdfdir@
388prefix = @prefix@
389program_transform_name = @program_transform_name@
390psdir = @psdir@
391sbindir = @sbindir@
392sharedstatedir = @sharedstatedir@
393srcdir = @srcdir@
394sysconfdir = @sysconfdir@
395target_alias = @target_alias@
396top_build_prefix = @top_build_prefix@
397top_builddir = @top_builddir@
398top_srcdir = @top_srcdir@
399SUBDIRS = src
400pkgconfigdir = $(libdir)/pkgconfig
401pkgconfig_DATA = fontenc.pc
402MAINTAINERCLEANFILES = ChangeLog INSTALL
403EXTRA_DIST = README.md
404all: config.h
405	$(MAKE) $(AM_MAKEFLAGS) all-recursive
406
407.SUFFIXES:
408am--refresh: Makefile
409	@:
410$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
411	@for dep in $?; do \
412	  case '$(am__configure_deps)' in \
413	    *$$dep*) \
414	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
415	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
416		&& exit 0; \
417	      exit 1;; \
418	  esac; \
419	done; \
420	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
421	$(am__cd) $(top_srcdir) && \
422	  $(AUTOMAKE) --foreign Makefile
423Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
424	@case '$?' in \
425	  *config.status*) \
426	    echo ' $(SHELL) ./config.status'; \
427	    $(SHELL) ./config.status;; \
428	  *) \
429	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
430	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
431	esac;
432
433$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
434	$(SHELL) ./config.status --recheck
435
436$(top_srcdir)/configure:  $(am__configure_deps)
437	$(am__cd) $(srcdir) && $(AUTOCONF)
438$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
439	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
440$(am__aclocal_m4_deps):
441
442config.h: stamp-h1
443	@test -f $@ || rm -f stamp-h1
444	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
445
446stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
447	@rm -f stamp-h1
448	cd $(top_builddir) && $(SHELL) ./config.status config.h
449$(srcdir)/config.h.in:  $(am__configure_deps) 
450	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
451	rm -f stamp-h1
452	touch $@
453
454distclean-hdr:
455	-rm -f config.h stamp-h1
456fontenc.pc: $(top_builddir)/config.status $(srcdir)/fontenc.pc.in
457	cd $(top_builddir) && $(SHELL) ./config.status $@
458
459mostlyclean-libtool:
460	-rm -f *.lo
461
462clean-libtool:
463	-rm -rf .libs _libs
464
465distclean-libtool:
466	-rm -f libtool config.lt
467install-pkgconfigDATA: $(pkgconfig_DATA)
468	@$(NORMAL_INSTALL)
469	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
470	if test -n "$$list"; then \
471	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
472	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
473	fi; \
474	for p in $$list; do \
475	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
476	  echo "$$d$$p"; \
477	done | $(am__base_list) | \
478	while read files; do \
479	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
480	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
481	done
482
483uninstall-pkgconfigDATA:
484	@$(NORMAL_UNINSTALL)
485	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
486	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
487	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
488
489# This directory's subdirectories are mostly independent; you can cd
490# into them and run 'make' without going through this Makefile.
491# To change the values of 'make' variables: instead of editing Makefiles,
492# (1) if the variable is set in 'config.status', edit 'config.status'
493#     (which will cause the Makefiles to be regenerated when you run 'make');
494# (2) otherwise, pass the desired values on the 'make' command line.
495$(am__recursive_targets):
496	@fail=; \
497	if $(am__make_keepgoing); then \
498	  failcom='fail=yes'; \
499	else \
500	  failcom='exit 1'; \
501	fi; \
502	dot_seen=no; \
503	target=`echo $@ | sed s/-recursive//`; \
504	case "$@" in \
505	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
506	  *) list='$(SUBDIRS)' ;; \
507	esac; \
508	for subdir in $$list; do \
509	  echo "Making $$target in $$subdir"; \
510	  if test "$$subdir" = "."; then \
511	    dot_seen=yes; \
512	    local_target="$$target-am"; \
513	  else \
514	    local_target="$$target"; \
515	  fi; \
516	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
517	  || eval $$failcom; \
518	done; \
519	if test "$$dot_seen" = "no"; then \
520	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
521	fi; test -z "$$fail"
522
523ID: $(am__tagged_files)
524	$(am__define_uniq_tagged_files); mkid -fID $$unique
525tags: tags-recursive
526TAGS: tags
527
528tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
529	set x; \
530	here=`pwd`; \
531	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
532	  include_option=--etags-include; \
533	  empty_fix=.; \
534	else \
535	  include_option=--include; \
536	  empty_fix=; \
537	fi; \
538	list='$(SUBDIRS)'; for subdir in $$list; do \
539	  if test "$$subdir" = .; then :; else \
540	    test ! -f $$subdir/TAGS || \
541	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
542	  fi; \
543	done; \
544	$(am__define_uniq_tagged_files); \
545	shift; \
546	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
547	  test -n "$$unique" || unique=$$empty_fix; \
548	  if test $$# -gt 0; then \
549	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
550	      "$$@" $$unique; \
551	  else \
552	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
553	      $$unique; \
554	  fi; \
555	fi
556ctags: ctags-recursive
557
558CTAGS: ctags
559ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
560	$(am__define_uniq_tagged_files); \
561	test -z "$(CTAGS_ARGS)$$unique" \
562	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
563	     $$unique
564
565GTAGS:
566	here=`$(am__cd) $(top_builddir) && pwd` \
567	  && $(am__cd) $(top_srcdir) \
568	  && gtags -i $(GTAGS_ARGS) "$$here"
569cscope: cscope.files
570	test ! -s cscope.files \
571	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
572clean-cscope:
573	-rm -f cscope.files
574cscope.files: clean-cscope cscopelist
575cscopelist: cscopelist-recursive
576
577cscopelist-am: $(am__tagged_files)
578	list='$(am__tagged_files)'; \
579	case "$(srcdir)" in \
580	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
581	  *) sdir=$(subdir)/$(srcdir) ;; \
582	esac; \
583	for i in $$list; do \
584	  if test -f "$$i"; then \
585	    echo "$(subdir)/$$i"; \
586	  else \
587	    echo "$$sdir/$$i"; \
588	  fi; \
589	done >> $(top_builddir)/cscope.files
590
591distclean-tags:
592	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
593	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
594
595distdir: $(DISTFILES)
596	$(am__remove_distdir)
597	test -d "$(distdir)" || mkdir "$(distdir)"
598	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
599	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
600	list='$(DISTFILES)'; \
601	  dist_files=`for file in $$list; do echo $$file; done | \
602	  sed -e "s|^$$srcdirstrip/||;t" \
603	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
604	case $$dist_files in \
605	  */*) $(MKDIR_P) `echo "$$dist_files" | \
606			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
607			   sort -u` ;; \
608	esac; \
609	for file in $$dist_files; do \
610	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
611	  if test -d $$d/$$file; then \
612	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
613	    if test -d "$(distdir)/$$file"; then \
614	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
615	    fi; \
616	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
617	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
618	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
619	    fi; \
620	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
621	  else \
622	    test -f "$(distdir)/$$file" \
623	    || cp -p $$d/$$file "$(distdir)/$$file" \
624	    || exit 1; \
625	  fi; \
626	done
627	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
628	  if test "$$subdir" = .; then :; else \
629	    $(am__make_dryrun) \
630	      || test -d "$(distdir)/$$subdir" \
631	      || $(MKDIR_P) "$(distdir)/$$subdir" \
632	      || exit 1; \
633	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
634	    $(am__relativize); \
635	    new_distdir=$$reldir; \
636	    dir1=$$subdir; dir2="$(top_distdir)"; \
637	    $(am__relativize); \
638	    new_top_distdir=$$reldir; \
639	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
640	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
641	    ($(am__cd) $$subdir && \
642	      $(MAKE) $(AM_MAKEFLAGS) \
643	        top_distdir="$$new_top_distdir" \
644	        distdir="$$new_distdir" \
645		am__remove_distdir=: \
646		am__skip_length_check=: \
647		am__skip_mode_fix=: \
648	        distdir) \
649	      || exit 1; \
650	  fi; \
651	done
652	$(MAKE) $(AM_MAKEFLAGS) \
653	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
654	  dist-hook
655	-test -n "$(am__skip_mode_fix)" \
656	|| find "$(distdir)" -type d ! -perm -755 \
657		-exec chmod u+rwx,go+rx {} \; -o \
658	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
659	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
660	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
661	|| chmod -R a+r "$(distdir)"
662dist-gzip: distdir
663	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
664	$(am__post_remove_distdir)
665dist-bzip2: distdir
666	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
667	$(am__post_remove_distdir)
668
669dist-lzip: distdir
670	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
671	$(am__post_remove_distdir)
672
673dist-xz: distdir
674	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
675	$(am__post_remove_distdir)
676
677dist-tarZ: distdir
678	@echo WARNING: "Support for distribution archives compressed with" \
679		       "legacy program 'compress' is deprecated." >&2
680	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
681	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
682	$(am__post_remove_distdir)
683
684dist-shar: distdir
685	@echo WARNING: "Support for shar distribution archives is" \
686	               "deprecated." >&2
687	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
688	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
689	$(am__post_remove_distdir)
690
691dist-zip: distdir
692	-rm -f $(distdir).zip
693	zip -rq $(distdir).zip $(distdir)
694	$(am__post_remove_distdir)
695
696dist dist-all:
697	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
698	$(am__post_remove_distdir)
699
700# This target untars the dist file and tries a VPATH configuration.  Then
701# it guarantees that the distribution is self-contained by making another
702# tarfile.
703distcheck: dist
704	case '$(DIST_ARCHIVES)' in \
705	*.tar.gz*) \
706	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
707	*.tar.bz2*) \
708	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
709	*.tar.lz*) \
710	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
711	*.tar.xz*) \
712	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
713	*.tar.Z*) \
714	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
715	*.shar.gz*) \
716	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
717	*.zip*) \
718	  unzip $(distdir).zip ;;\
719	esac
720	chmod -R a-w $(distdir)
721	chmod u+w $(distdir)
722	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
723	chmod a-w $(distdir)
724	test -d $(distdir)/_build || exit 0; \
725	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
726	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
727	  && am__cwd=`pwd` \
728	  && $(am__cd) $(distdir)/_build/sub \
729	  && ../../configure \
730	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
731	    $(DISTCHECK_CONFIGURE_FLAGS) \
732	    --srcdir=../.. --prefix="$$dc_install_base" \
733	  && $(MAKE) $(AM_MAKEFLAGS) \
734	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
735	  && $(MAKE) $(AM_MAKEFLAGS) check \
736	  && $(MAKE) $(AM_MAKEFLAGS) install \
737	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
738	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
739	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
740	        distuninstallcheck \
741	  && chmod -R a-w "$$dc_install_base" \
742	  && ({ \
743	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
744	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
745	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
746	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
747	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
748	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
749	  && rm -rf "$$dc_destdir" \
750	  && $(MAKE) $(AM_MAKEFLAGS) dist \
751	  && rm -rf $(DIST_ARCHIVES) \
752	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
753	  && cd "$$am__cwd" \
754	  || exit 1
755	$(am__post_remove_distdir)
756	@(echo "$(distdir) archives ready for distribution: "; \
757	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
758	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
759distuninstallcheck:
760	@test -n '$(distuninstallcheck_dir)' || { \
761	  echo 'ERROR: trying to run $@ with an empty' \
762	       '$$(distuninstallcheck_dir)' >&2; \
763	  exit 1; \
764	}; \
765	$(am__cd) '$(distuninstallcheck_dir)' || { \
766	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
767	  exit 1; \
768	}; \
769	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
770	   || { echo "ERROR: files left after uninstall:" ; \
771	        if test -n "$(DESTDIR)"; then \
772	          echo "  (check DESTDIR support)"; \
773	        fi ; \
774	        $(distuninstallcheck_listfiles) ; \
775	        exit 1; } >&2
776distcleancheck: distclean
777	@if test '$(srcdir)' = . ; then \
778	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
779	  exit 1 ; \
780	fi
781	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
782	  || { echo "ERROR: files left in build directory after distclean:" ; \
783	       $(distcleancheck_listfiles) ; \
784	       exit 1; } >&2
785check-am: all-am
786check: check-recursive
787all-am: Makefile $(DATA) config.h
788installdirs: installdirs-recursive
789installdirs-am:
790	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
791	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
792	done
793install: install-recursive
794install-exec: install-exec-recursive
795install-data: install-data-recursive
796uninstall: uninstall-recursive
797
798install-am: all-am
799	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
800
801installcheck: installcheck-recursive
802install-strip:
803	if test -z '$(STRIP)'; then \
804	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
805	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
806	      install; \
807	else \
808	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
809	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
810	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
811	fi
812mostlyclean-generic:
813
814clean-generic:
815
816distclean-generic:
817	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
818	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
819
820maintainer-clean-generic:
821	@echo "This command is intended for maintainers to use"
822	@echo "it deletes files that may require special tools to rebuild."
823	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
824clean: clean-recursive
825
826clean-am: clean-generic clean-libtool mostlyclean-am
827
828distclean: distclean-recursive
829	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
830	-rm -f Makefile
831distclean-am: clean-am distclean-generic distclean-hdr \
832	distclean-libtool distclean-tags
833
834dvi: dvi-recursive
835
836dvi-am:
837
838html: html-recursive
839
840html-am:
841
842info: info-recursive
843
844info-am:
845
846install-data-am: install-pkgconfigDATA
847
848install-dvi: install-dvi-recursive
849
850install-dvi-am:
851
852install-exec-am:
853
854install-html: install-html-recursive
855
856install-html-am:
857
858install-info: install-info-recursive
859
860install-info-am:
861
862install-man:
863
864install-pdf: install-pdf-recursive
865
866install-pdf-am:
867
868install-ps: install-ps-recursive
869
870install-ps-am:
871
872installcheck-am:
873
874maintainer-clean: maintainer-clean-recursive
875	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
876	-rm -rf $(top_srcdir)/autom4te.cache
877	-rm -f Makefile
878maintainer-clean-am: distclean-am maintainer-clean-generic
879
880mostlyclean: mostlyclean-recursive
881
882mostlyclean-am: mostlyclean-generic mostlyclean-libtool
883
884pdf: pdf-recursive
885
886pdf-am:
887
888ps: ps-recursive
889
890ps-am:
891
892uninstall-am: uninstall-pkgconfigDATA
893
894.MAKE: $(am__recursive_targets) all install-am install-strip
895
896.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
897	am--refresh check check-am clean clean-cscope clean-generic \
898	clean-libtool cscope cscopelist-am ctags ctags-am dist \
899	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
900	dist-tarZ dist-xz dist-zip distcheck distclean \
901	distclean-generic distclean-hdr distclean-libtool \
902	distclean-tags distcleancheck distdir distuninstallcheck dvi \
903	dvi-am html html-am info info-am install install-am \
904	install-data install-data-am install-dvi install-dvi-am \
905	install-exec install-exec-am install-html install-html-am \
906	install-info install-info-am install-man install-pdf \
907	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
908	install-strip installcheck installcheck-am installdirs \
909	installdirs-am maintainer-clean maintainer-clean-generic \
910	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
911	ps ps-am tags tags-am uninstall uninstall-am \
912	uninstall-pkgconfigDATA
913
914.PRECIOUS: Makefile
915
916
917.PHONY: ChangeLog INSTALL
918
919INSTALL:
920	$(INSTALL_CMD)
921
922ChangeLog:
923	$(CHANGELOG_CMD)
924
925dist-hook: ChangeLog INSTALL
926
927@LINT_TRUE@lint:
928@LINT_TRUE@	(cd src && $(MAKE) $(MFLAGS) lint)
929
930# Tell versions [3.59,3.63) of GNU make to not export all variables.
931# Otherwise a system limit (for SysV at least) may be exceeded.
932.NOEXPORT:
933