Makefile.in revision 1a054510 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18# 
19#  Copyright 2005  Red Hat, Inc.
20# 
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30# 
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39VPATH = @srcdir@
40pkgdatadir = $(datadir)/@PACKAGE@
41pkgincludedir = $(includedir)/@PACKAGE@
42pkglibdir = $(libdir)/@PACKAGE@
43pkglibexecdir = $(libexecdir)/@PACKAGE@
44am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
45install_sh_DATA = $(install_sh) -c -m 644
46install_sh_PROGRAM = $(install_sh) -c
47install_sh_SCRIPT = $(install_sh) -c
48INSTALL_HEADER = $(INSTALL_DATA)
49transform = $(program_transform_name)
50NORMAL_INSTALL = :
51PRE_INSTALL = :
52POST_INSTALL = :
53NORMAL_UNINSTALL = :
54PRE_UNINSTALL = :
55POST_UNINSTALL = :
56build_triplet = @build@
57host_triplet = @host@
58bin_PROGRAMS = smproxy$(EXEEXT)
59subdir = .
60DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
61	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
62	$(top_srcdir)/configure COPYING ChangeLog INSTALL config.guess \
63	config.sub depcomp install-sh missing
64ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
65am__aclocal_m4_deps = $(top_srcdir)/configure.ac
66am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
67	$(ACLOCAL_M4)
68am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
69 configure.lineno config.status.lineno
70mkinstalldirs = $(install_sh) -d
71CONFIG_HEADER = config.h
72CONFIG_CLEAN_FILES =
73CONFIG_CLEAN_VPATH_FILES =
74am__installdirs = "$(DESTDIR)$(bindir)"
75PROGRAMS = $(bin_PROGRAMS)
76am_smproxy_OBJECTS = save.$(OBJEXT) smproxy.$(OBJEXT)
77smproxy_OBJECTS = $(am_smproxy_OBJECTS)
78am__DEPENDENCIES_1 =
79smproxy_DEPENDENCIES = $(am__DEPENDENCIES_1)
80DEFAULT_INCLUDES = -I.@am__isrc@
81depcomp = $(SHELL) $(top_srcdir)/depcomp
82am__depfiles_maybe = depfiles
83am__mv = mv -f
84COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
85	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
86AM_V_CC = $(am__v_CC_$(V))
87am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
88am__v_CC_0 = @echo "  CC    " $@;
89AM_V_at = $(am__v_at_$(V))
90am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
91am__v_at_0 = @
92CCLD = $(CC)
93LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
94AM_V_CCLD = $(am__v_CCLD_$(V))
95am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
96am__v_CCLD_0 = @echo "  CCLD  " $@;
97AM_V_GEN = $(am__v_GEN_$(V))
98am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
99am__v_GEN_0 = @echo "  GEN   " $@;
100SOURCES = $(smproxy_SOURCES)
101DIST_SOURCES = $(smproxy_SOURCES)
102RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
103	html-recursive info-recursive install-data-recursive \
104	install-dvi-recursive install-exec-recursive \
105	install-html-recursive install-info-recursive \
106	install-pdf-recursive install-ps-recursive install-recursive \
107	installcheck-recursive installdirs-recursive pdf-recursive \
108	ps-recursive uninstall-recursive
109RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
110  distclean-recursive maintainer-clean-recursive
111AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
112	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
113	distdir dist dist-all distcheck
114ETAGS = etags
115CTAGS = ctags
116DIST_SUBDIRS = $(SUBDIRS)
117DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
118distdir = $(PACKAGE)-$(VERSION)
119top_distdir = $(distdir)
120am__remove_distdir = \
121  { test ! -d "$(distdir)" \
122    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
123         && rm -fr "$(distdir)"; }; }
124am__relativize = \
125  dir0=`pwd`; \
126  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
127  sed_rest='s,^[^/]*/*,,'; \
128  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
129  sed_butlast='s,/*[^/]*$$,,'; \
130  while test -n "$$dir1"; do \
131    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
132    if test "$$first" != "."; then \
133      if test "$$first" = ".."; then \
134        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
135        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
136      else \
137        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
138        if test "$$first2" = "$$first"; then \
139          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
140        else \
141          dir2="../$$dir2"; \
142        fi; \
143        dir0="$$dir0"/"$$first"; \
144      fi; \
145    fi; \
146    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
147  done; \
148  reldir="$$dir2"
149DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
150GZIP_ENV = --best
151distuninstallcheck_listfiles = find . -type f -print
152distcleancheck_listfiles = find . -type f -print
153ACLOCAL = @ACLOCAL@
154ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
155ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
156AMTAR = @AMTAR@
157AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
158APP_MAN_DIR = @APP_MAN_DIR@
159APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
160AUTOCONF = @AUTOCONF@
161AUTOHEADER = @AUTOHEADER@
162AUTOMAKE = @AUTOMAKE@
163AWK = @AWK@
164CC = @CC@
165CCDEPMODE = @CCDEPMODE@
166CFLAGS = @CFLAGS@
167CHANGELOG_CMD = @CHANGELOG_CMD@
168CPP = @CPP@
169CPPFLAGS = @CPPFLAGS@
170CWARNFLAGS = @CWARNFLAGS@
171CYGPATH_W = @CYGPATH_W@
172DEFS = @DEFS@
173DEPDIR = @DEPDIR@
174DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
175DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
176ECHO_C = @ECHO_C@
177ECHO_N = @ECHO_N@
178ECHO_T = @ECHO_T@
179EGREP = @EGREP@
180EXEEXT = @EXEEXT@
181FILE_MAN_DIR = @FILE_MAN_DIR@
182FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
183GREP = @GREP@
184INSTALL = @INSTALL@
185INSTALL_CMD = @INSTALL_CMD@
186INSTALL_DATA = @INSTALL_DATA@
187INSTALL_PROGRAM = @INSTALL_PROGRAM@
188INSTALL_SCRIPT = @INSTALL_SCRIPT@
189INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
190LDFLAGS = @LDFLAGS@
191LIBOBJS = @LIBOBJS@
192LIBS = @LIBS@
193LIB_MAN_DIR = @LIB_MAN_DIR@
194LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
195LTLIBOBJS = @LTLIBOBJS@
196MAINT = @MAINT@
197MAKEINFO = @MAKEINFO@
198MAN_SUBSTS = @MAN_SUBSTS@
199MISC_MAN_DIR = @MISC_MAN_DIR@
200MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
201MKDIR_P = @MKDIR_P@
202OBJEXT = @OBJEXT@
203PACKAGE = @PACKAGE@
204PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
205PACKAGE_NAME = @PACKAGE_NAME@
206PACKAGE_STRING = @PACKAGE_STRING@
207PACKAGE_TARNAME = @PACKAGE_TARNAME@
208PACKAGE_URL = @PACKAGE_URL@
209PACKAGE_VERSION = @PACKAGE_VERSION@
210PATH_SEPARATOR = @PATH_SEPARATOR@
211PKG_CONFIG = @PKG_CONFIG@
212SED = @SED@
213SET_MAKE = @SET_MAKE@
214SHELL = @SHELL@
215SMPROXY_CFLAGS = @SMPROXY_CFLAGS@
216SMPROXY_LIBS = @SMPROXY_LIBS@
217STRICT_CFLAGS = @STRICT_CFLAGS@
218STRIP = @STRIP@
219VERSION = @VERSION@
220XORG_MAN_PAGE = @XORG_MAN_PAGE@
221abs_builddir = @abs_builddir@
222abs_srcdir = @abs_srcdir@
223abs_top_builddir = @abs_top_builddir@
224abs_top_srcdir = @abs_top_srcdir@
225ac_ct_CC = @ac_ct_CC@
226am__include = @am__include@
227am__leading_dot = @am__leading_dot@
228am__quote = @am__quote@
229am__tar = @am__tar@
230am__untar = @am__untar@
231bindir = @bindir@
232build = @build@
233build_alias = @build_alias@
234build_cpu = @build_cpu@
235build_os = @build_os@
236build_vendor = @build_vendor@
237builddir = @builddir@
238datadir = @datadir@
239datarootdir = @datarootdir@
240docdir = @docdir@
241dvidir = @dvidir@
242exec_prefix = @exec_prefix@
243host = @host@
244host_alias = @host_alias@
245host_cpu = @host_cpu@
246host_os = @host_os@
247host_vendor = @host_vendor@
248htmldir = @htmldir@
249includedir = @includedir@
250infodir = @infodir@
251install_sh = @install_sh@
252libdir = @libdir@
253libexecdir = @libexecdir@
254localedir = @localedir@
255localstatedir = @localstatedir@
256mandir = @mandir@
257mkdir_p = @mkdir_p@
258oldincludedir = @oldincludedir@
259pdfdir = @pdfdir@
260prefix = @prefix@
261program_transform_name = @program_transform_name@
262psdir = @psdir@
263sbindir = @sbindir@
264sharedstatedir = @sharedstatedir@
265srcdir = @srcdir@
266sysconfdir = @sysconfdir@
267target_alias = @target_alias@
268top_build_prefix = @top_build_prefix@
269top_builddir = @top_builddir@
270top_srcdir = @top_srcdir@
271SUBDIRS = man
272AM_CFLAGS = $(CWARNFLAGS) $(SMPROXY_CFLAGS)
273smproxy_LDADD = $(SMPROXY_LIBS)
274smproxy_SOURCES = \
275        save.c \
276        smproxy.c \
277        smproxy.h
278
279MAINTAINERCLEANFILES = ChangeLog INSTALL
280all: config.h
281	$(MAKE) $(AM_MAKEFLAGS) all-recursive
282
283.SUFFIXES:
284.SUFFIXES: .c .o .obj
285am--refresh:
286	@:
287$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
288	@for dep in $?; do \
289	  case '$(am__configure_deps)' in \
290	    *$$dep*) \
291	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
292	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
293		&& exit 0; \
294	      exit 1;; \
295	  esac; \
296	done; \
297	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
298	$(am__cd) $(top_srcdir) && \
299	  $(AUTOMAKE) --foreign Makefile
300.PRECIOUS: Makefile
301Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
302	@case '$?' in \
303	  *config.status*) \
304	    echo ' $(SHELL) ./config.status'; \
305	    $(SHELL) ./config.status;; \
306	  *) \
307	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
308	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
309	esac;
310
311$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
312	$(SHELL) ./config.status --recheck
313
314$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
315	$(am__cd) $(srcdir) && $(AUTOCONF)
316$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
317	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
318$(am__aclocal_m4_deps):
319
320config.h: stamp-h1
321	@if test ! -f $@; then \
322	  rm -f stamp-h1; \
323	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
324	else :; fi
325
326stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
327	@rm -f stamp-h1
328	cd $(top_builddir) && $(SHELL) ./config.status config.h
329$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
330	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
331	rm -f stamp-h1
332	touch $@
333
334distclean-hdr:
335	-rm -f config.h stamp-h1
336install-binPROGRAMS: $(bin_PROGRAMS)
337	@$(NORMAL_INSTALL)
338	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
339	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
340	for p in $$list; do echo "$$p $$p"; done | \
341	sed 's/$(EXEEXT)$$//' | \
342	while read p p1; do if test -f $$p; \
343	  then echo "$$p"; echo "$$p"; else :; fi; \
344	done | \
345	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
346	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
347	sed 'N;N;N;s,\n, ,g' | \
348	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
349	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
350	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
351	    else { print "f", $$3 "/" $$4, $$1; } } \
352	  END { for (d in files) print "f", d, files[d] }' | \
353	while read type dir files; do \
354	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
355	    test -z "$$files" || { \
356	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
357	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
358	    } \
359	; done
360
361uninstall-binPROGRAMS:
362	@$(NORMAL_UNINSTALL)
363	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
364	files=`for p in $$list; do echo "$$p"; done | \
365	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
366	      -e 's/$$/$(EXEEXT)/' `; \
367	test -n "$$list" || exit 0; \
368	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
369	cd "$(DESTDIR)$(bindir)" && rm -f $$files
370
371clean-binPROGRAMS:
372	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
373smproxy$(EXEEXT): $(smproxy_OBJECTS) $(smproxy_DEPENDENCIES) 
374	@rm -f smproxy$(EXEEXT)
375	$(AM_V_CCLD)$(LINK) $(smproxy_OBJECTS) $(smproxy_LDADD) $(LIBS)
376
377mostlyclean-compile:
378	-rm -f *.$(OBJEXT)
379
380distclean-compile:
381	-rm -f *.tab.c
382
383@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/save.Po@am__quote@
384@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/smproxy.Po@am__quote@
385
386.c.o:
387@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
388@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
389@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
390@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
391@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
392@am__fastdepCC_FALSE@	$(COMPILE) -c $<
393
394.c.obj:
395@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
396@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
397@am__fastdepCC_FALSE@	$(AM_V_CC) @AM_BACKSLASH@
398@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
399@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
400@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
401
402# This directory's subdirectories are mostly independent; you can cd
403# into them and run `make' without going through this Makefile.
404# To change the values of `make' variables: instead of editing Makefiles,
405# (1) if the variable is set in `config.status', edit `config.status'
406#     (which will cause the Makefiles to be regenerated when you run `make');
407# (2) otherwise, pass the desired values on the `make' command line.
408$(RECURSIVE_TARGETS):
409	@fail= failcom='exit 1'; \
410	for f in x $$MAKEFLAGS; do \
411	  case $$f in \
412	    *=* | --[!k]*);; \
413	    *k*) failcom='fail=yes';; \
414	  esac; \
415	done; \
416	dot_seen=no; \
417	target=`echo $@ | sed s/-recursive//`; \
418	list='$(SUBDIRS)'; for subdir in $$list; do \
419	  echo "Making $$target in $$subdir"; \
420	  if test "$$subdir" = "."; then \
421	    dot_seen=yes; \
422	    local_target="$$target-am"; \
423	  else \
424	    local_target="$$target"; \
425	  fi; \
426	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
427	  || eval $$failcom; \
428	done; \
429	if test "$$dot_seen" = "no"; then \
430	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
431	fi; test -z "$$fail"
432
433$(RECURSIVE_CLEAN_TARGETS):
434	@fail= failcom='exit 1'; \
435	for f in x $$MAKEFLAGS; do \
436	  case $$f in \
437	    *=* | --[!k]*);; \
438	    *k*) failcom='fail=yes';; \
439	  esac; \
440	done; \
441	dot_seen=no; \
442	case "$@" in \
443	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
444	  *) list='$(SUBDIRS)' ;; \
445	esac; \
446	rev=''; for subdir in $$list; do \
447	  if test "$$subdir" = "."; then :; else \
448	    rev="$$subdir $$rev"; \
449	  fi; \
450	done; \
451	rev="$$rev ."; \
452	target=`echo $@ | sed s/-recursive//`; \
453	for subdir in $$rev; do \
454	  echo "Making $$target in $$subdir"; \
455	  if test "$$subdir" = "."; then \
456	    local_target="$$target-am"; \
457	  else \
458	    local_target="$$target"; \
459	  fi; \
460	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
461	  || eval $$failcom; \
462	done && test -z "$$fail"
463tags-recursive:
464	list='$(SUBDIRS)'; for subdir in $$list; do \
465	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
466	done
467ctags-recursive:
468	list='$(SUBDIRS)'; for subdir in $$list; do \
469	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
470	done
471
472ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
473	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
474	unique=`for i in $$list; do \
475	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
476	  done | \
477	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
478	      END { if (nonempty) { for (i in files) print i; }; }'`; \
479	mkid -fID $$unique
480tags: TAGS
481
482TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
483		$(TAGS_FILES) $(LISP)
484	set x; \
485	here=`pwd`; \
486	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
487	  include_option=--etags-include; \
488	  empty_fix=.; \
489	else \
490	  include_option=--include; \
491	  empty_fix=; \
492	fi; \
493	list='$(SUBDIRS)'; for subdir in $$list; do \
494	  if test "$$subdir" = .; then :; else \
495	    test ! -f $$subdir/TAGS || \
496	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
497	  fi; \
498	done; \
499	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
500	unique=`for i in $$list; do \
501	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
502	  done | \
503	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
504	      END { if (nonempty) { for (i in files) print i; }; }'`; \
505	shift; \
506	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
507	  test -n "$$unique" || unique=$$empty_fix; \
508	  if test $$# -gt 0; then \
509	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
510	      "$$@" $$unique; \
511	  else \
512	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
513	      $$unique; \
514	  fi; \
515	fi
516ctags: CTAGS
517CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
518		$(TAGS_FILES) $(LISP)
519	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
520	unique=`for i in $$list; do \
521	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
522	  done | \
523	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
524	      END { if (nonempty) { for (i in files) print i; }; }'`; \
525	test -z "$(CTAGS_ARGS)$$unique" \
526	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
527	     $$unique
528
529GTAGS:
530	here=`$(am__cd) $(top_builddir) && pwd` \
531	  && $(am__cd) $(top_srcdir) \
532	  && gtags -i $(GTAGS_ARGS) "$$here"
533
534distclean-tags:
535	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
536
537distdir: $(DISTFILES)
538	$(am__remove_distdir)
539	test -d "$(distdir)" || mkdir "$(distdir)"
540	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
541	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
542	list='$(DISTFILES)'; \
543	  dist_files=`for file in $$list; do echo $$file; done | \
544	  sed -e "s|^$$srcdirstrip/||;t" \
545	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
546	case $$dist_files in \
547	  */*) $(MKDIR_P) `echo "$$dist_files" | \
548			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
549			   sort -u` ;; \
550	esac; \
551	for file in $$dist_files; do \
552	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
553	  if test -d $$d/$$file; then \
554	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
555	    if test -d "$(distdir)/$$file"; then \
556	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
557	    fi; \
558	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
559	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
560	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
561	    fi; \
562	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
563	  else \
564	    test -f "$(distdir)/$$file" \
565	    || cp -p $$d/$$file "$(distdir)/$$file" \
566	    || exit 1; \
567	  fi; \
568	done
569	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
570	  if test "$$subdir" = .; then :; else \
571	    test -d "$(distdir)/$$subdir" \
572	    || $(MKDIR_P) "$(distdir)/$$subdir" \
573	    || exit 1; \
574	  fi; \
575	done
576	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
577	  if test "$$subdir" = .; then :; else \
578	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
579	    $(am__relativize); \
580	    new_distdir=$$reldir; \
581	    dir1=$$subdir; dir2="$(top_distdir)"; \
582	    $(am__relativize); \
583	    new_top_distdir=$$reldir; \
584	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
585	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
586	    ($(am__cd) $$subdir && \
587	      $(MAKE) $(AM_MAKEFLAGS) \
588	        top_distdir="$$new_top_distdir" \
589	        distdir="$$new_distdir" \
590		am__remove_distdir=: \
591		am__skip_length_check=: \
592		am__skip_mode_fix=: \
593	        distdir) \
594	      || exit 1; \
595	  fi; \
596	done
597	$(MAKE) $(AM_MAKEFLAGS) \
598	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
599	  dist-hook
600	-test -n "$(am__skip_mode_fix)" \
601	|| find "$(distdir)" -type d ! -perm -755 \
602		-exec chmod u+rwx,go+rx {} \; -o \
603	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
604	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
605	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
606	|| chmod -R a+r "$(distdir)"
607dist-gzip: distdir
608	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
609	$(am__remove_distdir)
610dist-bzip2: distdir
611	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
612	$(am__remove_distdir)
613
614dist-lzma: distdir
615	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
616	$(am__remove_distdir)
617
618dist-xz: distdir
619	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
620	$(am__remove_distdir)
621
622dist-tarZ: distdir
623	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
624	$(am__remove_distdir)
625
626dist-shar: distdir
627	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
628	$(am__remove_distdir)
629
630dist-zip: distdir
631	-rm -f $(distdir).zip
632	zip -rq $(distdir).zip $(distdir)
633	$(am__remove_distdir)
634
635dist dist-all: distdir
636	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
637	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
638	$(am__remove_distdir)
639
640# This target untars the dist file and tries a VPATH configuration.  Then
641# it guarantees that the distribution is self-contained by making another
642# tarfile.
643distcheck: dist
644	case '$(DIST_ARCHIVES)' in \
645	*.tar.gz*) \
646	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
647	*.tar.bz2*) \
648	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
649	*.tar.lzma*) \
650	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
651	*.tar.xz*) \
652	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
653	*.tar.Z*) \
654	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
655	*.shar.gz*) \
656	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
657	*.zip*) \
658	  unzip $(distdir).zip ;;\
659	esac
660	chmod -R a-w $(distdir); chmod a+w $(distdir)
661	mkdir $(distdir)/_build
662	mkdir $(distdir)/_inst
663	chmod a-w $(distdir)
664	test -d $(distdir)/_build || exit 0; \
665	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
666	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
667	  && am__cwd=`pwd` \
668	  && $(am__cd) $(distdir)/_build \
669	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
670	    $(DISTCHECK_CONFIGURE_FLAGS) \
671	  && $(MAKE) $(AM_MAKEFLAGS) \
672	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
673	  && $(MAKE) $(AM_MAKEFLAGS) check \
674	  && $(MAKE) $(AM_MAKEFLAGS) install \
675	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
676	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
677	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
678	        distuninstallcheck \
679	  && chmod -R a-w "$$dc_install_base" \
680	  && ({ \
681	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
682	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
683	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
684	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
685	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
686	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
687	  && rm -rf "$$dc_destdir" \
688	  && $(MAKE) $(AM_MAKEFLAGS) dist \
689	  && rm -rf $(DIST_ARCHIVES) \
690	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
691	  && cd "$$am__cwd" \
692	  || exit 1
693	$(am__remove_distdir)
694	@(echo "$(distdir) archives ready for distribution: "; \
695	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
696	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
697distuninstallcheck:
698	@$(am__cd) '$(distuninstallcheck_dir)' \
699	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
700	   || { echo "ERROR: files left after uninstall:" ; \
701	        if test -n "$(DESTDIR)"; then \
702	          echo "  (check DESTDIR support)"; \
703	        fi ; \
704	        $(distuninstallcheck_listfiles) ; \
705	        exit 1; } >&2
706distcleancheck: distclean
707	@if test '$(srcdir)' = . ; then \
708	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
709	  exit 1 ; \
710	fi
711	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
712	  || { echo "ERROR: files left in build directory after distclean:" ; \
713	       $(distcleancheck_listfiles) ; \
714	       exit 1; } >&2
715check-am: all-am
716check: check-recursive
717all-am: Makefile $(PROGRAMS) config.h
718installdirs: installdirs-recursive
719installdirs-am:
720	for dir in "$(DESTDIR)$(bindir)"; do \
721	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
722	done
723install: install-recursive
724install-exec: install-exec-recursive
725install-data: install-data-recursive
726uninstall: uninstall-recursive
727
728install-am: all-am
729	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
730
731installcheck: installcheck-recursive
732install-strip:
733	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
734	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
735	  `test -z '$(STRIP)' || \
736	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
737mostlyclean-generic:
738
739clean-generic:
740
741distclean-generic:
742	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
743	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
744
745maintainer-clean-generic:
746	@echo "This command is intended for maintainers to use"
747	@echo "it deletes files that may require special tools to rebuild."
748	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
749clean: clean-recursive
750
751clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
752
753distclean: distclean-recursive
754	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
755	-rm -rf ./$(DEPDIR)
756	-rm -f Makefile
757distclean-am: clean-am distclean-compile distclean-generic \
758	distclean-hdr distclean-tags
759
760dvi: dvi-recursive
761
762dvi-am:
763
764html: html-recursive
765
766html-am:
767
768info: info-recursive
769
770info-am:
771
772install-data-am:
773
774install-dvi: install-dvi-recursive
775
776install-dvi-am:
777
778install-exec-am: install-binPROGRAMS
779
780install-html: install-html-recursive
781
782install-html-am:
783
784install-info: install-info-recursive
785
786install-info-am:
787
788install-man:
789
790install-pdf: install-pdf-recursive
791
792install-pdf-am:
793
794install-ps: install-ps-recursive
795
796install-ps-am:
797
798installcheck-am:
799
800maintainer-clean: maintainer-clean-recursive
801	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
802	-rm -rf $(top_srcdir)/autom4te.cache
803	-rm -rf ./$(DEPDIR)
804	-rm -f Makefile
805maintainer-clean-am: distclean-am maintainer-clean-generic
806
807mostlyclean: mostlyclean-recursive
808
809mostlyclean-am: mostlyclean-compile mostlyclean-generic
810
811pdf: pdf-recursive
812
813pdf-am:
814
815ps: ps-recursive
816
817ps-am:
818
819uninstall-am: uninstall-binPROGRAMS
820
821.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
822	ctags-recursive install-am install-strip tags-recursive
823
824.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
825	all all-am am--refresh check check-am clean clean-binPROGRAMS \
826	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
827	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
828	dist-zip distcheck distclean distclean-compile \
829	distclean-generic distclean-hdr distclean-tags distcleancheck \
830	distdir distuninstallcheck dvi dvi-am html html-am info \
831	info-am install install-am install-binPROGRAMS install-data \
832	install-data-am install-dvi install-dvi-am install-exec \
833	install-exec-am install-html install-html-am install-info \
834	install-info-am install-man install-pdf install-pdf-am \
835	install-ps install-ps-am install-strip installcheck \
836	installcheck-am installdirs installdirs-am maintainer-clean \
837	maintainer-clean-generic mostlyclean mostlyclean-compile \
838	mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
839	uninstall uninstall-am uninstall-binPROGRAMS
840
841
842.PHONY: ChangeLog INSTALL
843
844INSTALL:
845	$(INSTALL_CMD)
846
847ChangeLog:
848	$(CHANGELOG_CMD)
849
850dist-hook: ChangeLog INSTALL
851
852# Tell versions [3.59,3.63) of GNU make to not export all variables.
853# Otherwise a system limit (for SysV at least) may be exceeded.
854.NOEXPORT:
855