1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#
18#  Copyright 2005  Red Hat, Inc.
19#
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29#
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112bin_PROGRAMS = xeyes$(EXEEXT)
113subdir = .
114ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
115am__aclocal_m4_deps = $(top_srcdir)/configure.ac
116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
117	$(ACLOCAL_M4)
118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
119	$(am__configure_deps) $(am__DIST_COMMON)
120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
121 configure.lineno config.status.lineno
122mkinstalldirs = $(install_sh) -d
123CONFIG_HEADER = config.h
124CONFIG_CLEAN_FILES =
125CONFIG_CLEAN_VPATH_FILES =
126am__installdirs = "$(DESTDIR)$(bindir)"
127PROGRAMS = $(bin_PROGRAMS)
128am_xeyes_OBJECTS = Eyes.$(OBJEXT) transform.$(OBJEXT) xeyes.$(OBJEXT)
129xeyes_OBJECTS = $(am_xeyes_OBJECTS)
130am__DEPENDENCIES_1 =
131xeyes_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
132	$(am__DEPENDENCIES_1)
133AM_V_P = $(am__v_P_@AM_V@)
134am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
135am__v_P_0 = false
136am__v_P_1 = :
137AM_V_GEN = $(am__v_GEN_@AM_V@)
138am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
139am__v_GEN_0 = @echo "  GEN     " $@;
140am__v_GEN_1 = 
141AM_V_at = $(am__v_at_@AM_V@)
142am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
143am__v_at_0 = @
144am__v_at_1 = 
145DEFAULT_INCLUDES = -I.@am__isrc@
146depcomp = $(SHELL) $(top_srcdir)/depcomp
147am__maybe_remake_depfiles = depfiles
148am__depfiles_remade = ./$(DEPDIR)/Eyes.Po ./$(DEPDIR)/transform.Po \
149	./$(DEPDIR)/xeyes.Po
150am__mv = mv -f
151COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
152	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
153AM_V_CC = $(am__v_CC_@AM_V@)
154am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
155am__v_CC_0 = @echo "  CC      " $@;
156am__v_CC_1 = 
157CCLD = $(CC)
158LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
159AM_V_CCLD = $(am__v_CCLD_@AM_V@)
160am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
161am__v_CCLD_0 = @echo "  CCLD    " $@;
162am__v_CCLD_1 = 
163SOURCES = $(xeyes_SOURCES)
164DIST_SOURCES = $(xeyes_SOURCES)
165RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
166	ctags-recursive dvi-recursive html-recursive info-recursive \
167	install-data-recursive install-dvi-recursive \
168	install-exec-recursive install-html-recursive \
169	install-info-recursive install-pdf-recursive \
170	install-ps-recursive install-recursive installcheck-recursive \
171	installdirs-recursive pdf-recursive ps-recursive \
172	tags-recursive uninstall-recursive
173am__can_run_installinfo = \
174  case $$AM_UPDATE_INFO_DIR in \
175    n|no|NO) false;; \
176    *) (install-info --version) >/dev/null 2>&1;; \
177  esac
178RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
179  distclean-recursive maintainer-clean-recursive
180am__recursive_targets = \
181  $(RECURSIVE_TARGETS) \
182  $(RECURSIVE_CLEAN_TARGETS) \
183  $(am__extra_recursive_targets)
184AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
185	cscope distdir distdir-am dist dist-all distcheck
186am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
187	config.h.in
188# Read a list of newline-separated strings from the standard input,
189# and print each of them once, without duplicates.  Input order is
190# *not* preserved.
191am__uniquify_input = $(AWK) '\
192  BEGIN { nonempty = 0; } \
193  { items[$$0] = 1; nonempty = 1; } \
194  END { if (nonempty) { for (i in items) print i; }; } \
195'
196# Make sure the list of sources is unique.  This is necessary because,
197# e.g., the same source file might be shared among _SOURCES variables
198# for different programs/libraries.
199am__define_uniq_tagged_files = \
200  list='$(am__tagged_files)'; \
201  unique=`for i in $$list; do \
202    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
203  done | $(am__uniquify_input)`
204DIST_SUBDIRS = $(SUBDIRS)
205am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
206	ChangeLog INSTALL README.md compile config.guess config.sub \
207	depcomp install-sh missing
208DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
209distdir = $(PACKAGE)-$(VERSION)
210top_distdir = $(distdir)
211am__remove_distdir = \
212  if test -d "$(distdir)"; then \
213    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
214      && rm -rf "$(distdir)" \
215      || { sleep 5 && rm -rf "$(distdir)"; }; \
216  else :; fi
217am__post_remove_distdir = $(am__remove_distdir)
218am__relativize = \
219  dir0=`pwd`; \
220  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
221  sed_rest='s,^[^/]*/*,,'; \
222  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
223  sed_butlast='s,/*[^/]*$$,,'; \
224  while test -n "$$dir1"; do \
225    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
226    if test "$$first" != "."; then \
227      if test "$$first" = ".."; then \
228        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
229        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
230      else \
231        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
232        if test "$$first2" = "$$first"; then \
233          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
234        else \
235          dir2="../$$dir2"; \
236        fi; \
237        dir0="$$dir0"/"$$first"; \
238      fi; \
239    fi; \
240    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
241  done; \
242  reldir="$$dir2"
243DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
244GZIP_ENV = --best
245DIST_TARGETS = dist-xz dist-gzip
246# Exists only to be overridden by the user if desired.
247AM_DISTCHECK_DVI_TARGET = dvi
248distuninstallcheck_listfiles = find . -type f -print
249am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
250  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
251distcleancheck_listfiles = find . -type f -print
252ACLOCAL = @ACLOCAL@
253ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
254ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
255AMTAR = @AMTAR@
256AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
257APP_MAN_DIR = @APP_MAN_DIR@
258APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
259AUTOCONF = @AUTOCONF@
260AUTOHEADER = @AUTOHEADER@
261AUTOMAKE = @AUTOMAKE@
262AWK = @AWK@
263BASE_CFLAGS = @BASE_CFLAGS@
264CC = @CC@
265CCDEPMODE = @CCDEPMODE@
266CFLAGS = @CFLAGS@
267CHANGELOG_CMD = @CHANGELOG_CMD@
268CPPFLAGS = @CPPFLAGS@
269CSCOPE = @CSCOPE@
270CTAGS = @CTAGS@
271CWARNFLAGS = @CWARNFLAGS@
272CYGPATH_W = @CYGPATH_W@
273DEFS = @DEFS@
274DEPDIR = @DEPDIR@
275DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
276DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
277ECHO_C = @ECHO_C@
278ECHO_N = @ECHO_N@
279ECHO_T = @ECHO_T@
280ETAGS = @ETAGS@
281EXEEXT = @EXEEXT@
282FILE_MAN_DIR = @FILE_MAN_DIR@
283FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
284INSTALL = @INSTALL@
285INSTALL_CMD = @INSTALL_CMD@
286INSTALL_DATA = @INSTALL_DATA@
287INSTALL_PROGRAM = @INSTALL_PROGRAM@
288INSTALL_SCRIPT = @INSTALL_SCRIPT@
289INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
290LDFLAGS = @LDFLAGS@
291LIBOBJS = @LIBOBJS@
292LIBS = @LIBS@
293LIB_MAN_DIR = @LIB_MAN_DIR@
294LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
295LTLIBOBJS = @LTLIBOBJS@
296MAKEINFO = @MAKEINFO@
297MAN_SUBSTS = @MAN_SUBSTS@
298MISC_MAN_DIR = @MISC_MAN_DIR@
299MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
300MKDIR_P = @MKDIR_P@
301OBJEXT = @OBJEXT@
302PACKAGE = @PACKAGE@
303PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
304PACKAGE_NAME = @PACKAGE_NAME@
305PACKAGE_STRING = @PACKAGE_STRING@
306PACKAGE_TARNAME = @PACKAGE_TARNAME@
307PACKAGE_URL = @PACKAGE_URL@
308PACKAGE_VERSION = @PACKAGE_VERSION@
309PATH_SEPARATOR = @PATH_SEPARATOR@
310PKG_CONFIG = @PKG_CONFIG@
311PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
312PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
313PRESENT_CFLAGS = @PRESENT_CFLAGS@
314PRESENT_LIBS = @PRESENT_LIBS@
315SED = @SED@
316SET_MAKE = @SET_MAKE@
317SHELL = @SHELL@
318STRICT_CFLAGS = @STRICT_CFLAGS@
319STRIP = @STRIP@
320VERSION = @VERSION@
321XEYES_CFLAGS = @XEYES_CFLAGS@
322XEYES_LIBS = @XEYES_LIBS@
323XORG_MAN_PAGE = @XORG_MAN_PAGE@
324XRENDER_CFLAGS = @XRENDER_CFLAGS@
325XRENDER_LIBS = @XRENDER_LIBS@
326abs_builddir = @abs_builddir@
327abs_srcdir = @abs_srcdir@
328abs_top_builddir = @abs_top_builddir@
329abs_top_srcdir = @abs_top_srcdir@
330ac_ct_CC = @ac_ct_CC@
331am__include = @am__include@
332am__leading_dot = @am__leading_dot@
333am__quote = @am__quote@
334am__tar = @am__tar@
335am__untar = @am__untar@
336bindir = @bindir@
337build = @build@
338build_alias = @build_alias@
339build_cpu = @build_cpu@
340build_os = @build_os@
341build_vendor = @build_vendor@
342builddir = @builddir@
343datadir = @datadir@
344datarootdir = @datarootdir@
345docdir = @docdir@
346dvidir = @dvidir@
347exec_prefix = @exec_prefix@
348host = @host@
349host_alias = @host_alias@
350host_cpu = @host_cpu@
351host_os = @host_os@
352host_vendor = @host_vendor@
353htmldir = @htmldir@
354includedir = @includedir@
355infodir = @infodir@
356install_sh = @install_sh@
357libdir = @libdir@
358libexecdir = @libexecdir@
359localedir = @localedir@
360localstatedir = @localstatedir@
361mandir = @mandir@
362mkdir_p = @mkdir_p@
363oldincludedir = @oldincludedir@
364pdfdir = @pdfdir@
365prefix = @prefix@
366program_transform_name = @program_transform_name@
367psdir = @psdir@
368runstatedir = @runstatedir@
369sbindir = @sbindir@
370sharedstatedir = @sharedstatedir@
371srcdir = @srcdir@
372sysconfdir = @sysconfdir@
373target_alias = @target_alias@
374top_build_prefix = @top_build_prefix@
375top_builddir = @top_builddir@
376top_srcdir = @top_srcdir@
377SUBDIRS = man
378AM_CFLAGS = $(XEYES_CFLAGS) $(XRENDER_CFLAGS) $(PRESENT_CFLAGS)  $(CWARNFLAGS)
379xeyes_LDADD = $(XEYES_LIBS) $(XRENDER_LIBS) $(PRESENT_LIBS) -lm
380xeyes_SOURCES = \
381        Eyes.c \
382        Eyes.h \
383        EyesP.h \
384        transform.c \
385        transform.h \
386        xeyes.c
387
388EXTRA_DIST = eyes.bit eyesmask.bit README.md
389MAINTAINERCLEANFILES = ChangeLog INSTALL
390all: config.h
391	$(MAKE) $(AM_MAKEFLAGS) all-recursive
392
393.SUFFIXES:
394.SUFFIXES: .c .o .obj
395am--refresh: Makefile
396	@:
397$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
398	@for dep in $?; do \
399	  case '$(am__configure_deps)' in \
400	    *$$dep*) \
401	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
402	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
403		&& exit 0; \
404	      exit 1;; \
405	  esac; \
406	done; \
407	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
408	$(am__cd) $(top_srcdir) && \
409	  $(AUTOMAKE) --foreign Makefile
410Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
411	@case '$?' in \
412	  *config.status*) \
413	    echo ' $(SHELL) ./config.status'; \
414	    $(SHELL) ./config.status;; \
415	  *) \
416	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
417	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
418	esac;
419
420$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
421	$(SHELL) ./config.status --recheck
422
423$(top_srcdir)/configure:  $(am__configure_deps)
424	$(am__cd) $(srcdir) && $(AUTOCONF)
425$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
426	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
427$(am__aclocal_m4_deps):
428
429config.h: stamp-h1
430	@test -f $@ || rm -f stamp-h1
431	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
432
433stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
434	@rm -f stamp-h1
435	cd $(top_builddir) && $(SHELL) ./config.status config.h
436$(srcdir)/config.h.in:  $(am__configure_deps) 
437	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
438	rm -f stamp-h1
439	touch $@
440
441distclean-hdr:
442	-rm -f config.h stamp-h1
443install-binPROGRAMS: $(bin_PROGRAMS)
444	@$(NORMAL_INSTALL)
445	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
446	if test -n "$$list"; then \
447	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
448	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
449	fi; \
450	for p in $$list; do echo "$$p $$p"; done | \
451	sed 's/$(EXEEXT)$$//' | \
452	while read p p1; do if test -f $$p \
453	  ; then echo "$$p"; echo "$$p"; else :; fi; \
454	done | \
455	sed -e 'p;s,.*/,,;n;h' \
456	    -e 's|.*|.|' \
457	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
458	sed 'N;N;N;s,\n, ,g' | \
459	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
460	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
461	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
462	    else { print "f", $$3 "/" $$4, $$1; } } \
463	  END { for (d in files) print "f", d, files[d] }' | \
464	while read type dir files; do \
465	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
466	    test -z "$$files" || { \
467	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
468	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
469	    } \
470	; done
471
472uninstall-binPROGRAMS:
473	@$(NORMAL_UNINSTALL)
474	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
475	files=`for p in $$list; do echo "$$p"; done | \
476	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
477	      -e 's/$$/$(EXEEXT)/' \
478	`; \
479	test -n "$$list" || exit 0; \
480	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
481	cd "$(DESTDIR)$(bindir)" && rm -f $$files
482
483clean-binPROGRAMS:
484	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
485
486xeyes$(EXEEXT): $(xeyes_OBJECTS) $(xeyes_DEPENDENCIES) $(EXTRA_xeyes_DEPENDENCIES) 
487	@rm -f xeyes$(EXEEXT)
488	$(AM_V_CCLD)$(LINK) $(xeyes_OBJECTS) $(xeyes_LDADD) $(LIBS)
489
490mostlyclean-compile:
491	-rm -f *.$(OBJEXT)
492
493distclean-compile:
494	-rm -f *.tab.c
495
496@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Eyes.Po@am__quote@ # am--include-marker
497@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/transform.Po@am__quote@ # am--include-marker
498@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xeyes.Po@am__quote@ # am--include-marker
499
500$(am__depfiles_remade):
501	@$(MKDIR_P) $(@D)
502	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
503
504am--depfiles: $(am__depfiles_remade)
505
506.c.o:
507@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
508@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
509@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
510@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
511@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
512
513.c.obj:
514@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
515@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
516@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
517@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
518@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
519
520# This directory's subdirectories are mostly independent; you can cd
521# into them and run 'make' without going through this Makefile.
522# To change the values of 'make' variables: instead of editing Makefiles,
523# (1) if the variable is set in 'config.status', edit 'config.status'
524#     (which will cause the Makefiles to be regenerated when you run 'make');
525# (2) otherwise, pass the desired values on the 'make' command line.
526$(am__recursive_targets):
527	@fail=; \
528	if $(am__make_keepgoing); then \
529	  failcom='fail=yes'; \
530	else \
531	  failcom='exit 1'; \
532	fi; \
533	dot_seen=no; \
534	target=`echo $@ | sed s/-recursive//`; \
535	case "$@" in \
536	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
537	  *) list='$(SUBDIRS)' ;; \
538	esac; \
539	for subdir in $$list; do \
540	  echo "Making $$target in $$subdir"; \
541	  if test "$$subdir" = "."; then \
542	    dot_seen=yes; \
543	    local_target="$$target-am"; \
544	  else \
545	    local_target="$$target"; \
546	  fi; \
547	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
548	  || eval $$failcom; \
549	done; \
550	if test "$$dot_seen" = "no"; then \
551	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
552	fi; test -z "$$fail"
553
554ID: $(am__tagged_files)
555	$(am__define_uniq_tagged_files); mkid -fID $$unique
556tags: tags-recursive
557TAGS: tags
558
559tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
560	set x; \
561	here=`pwd`; \
562	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
563	  include_option=--etags-include; \
564	  empty_fix=.; \
565	else \
566	  include_option=--include; \
567	  empty_fix=; \
568	fi; \
569	list='$(SUBDIRS)'; for subdir in $$list; do \
570	  if test "$$subdir" = .; then :; else \
571	    test ! -f $$subdir/TAGS || \
572	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
573	  fi; \
574	done; \
575	$(am__define_uniq_tagged_files); \
576	shift; \
577	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
578	  test -n "$$unique" || unique=$$empty_fix; \
579	  if test $$# -gt 0; then \
580	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
581	      "$$@" $$unique; \
582	  else \
583	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
584	      $$unique; \
585	  fi; \
586	fi
587ctags: ctags-recursive
588
589CTAGS: ctags
590ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
591	$(am__define_uniq_tagged_files); \
592	test -z "$(CTAGS_ARGS)$$unique" \
593	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
594	     $$unique
595
596GTAGS:
597	here=`$(am__cd) $(top_builddir) && pwd` \
598	  && $(am__cd) $(top_srcdir) \
599	  && gtags -i $(GTAGS_ARGS) "$$here"
600cscope: cscope.files
601	test ! -s cscope.files \
602	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
603clean-cscope:
604	-rm -f cscope.files
605cscope.files: clean-cscope cscopelist
606cscopelist: cscopelist-recursive
607
608cscopelist-am: $(am__tagged_files)
609	list='$(am__tagged_files)'; \
610	case "$(srcdir)" in \
611	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
612	  *) sdir=$(subdir)/$(srcdir) ;; \
613	esac; \
614	for i in $$list; do \
615	  if test -f "$$i"; then \
616	    echo "$(subdir)/$$i"; \
617	  else \
618	    echo "$$sdir/$$i"; \
619	  fi; \
620	done >> $(top_builddir)/cscope.files
621
622distclean-tags:
623	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
624	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
625distdir: $(BUILT_SOURCES)
626	$(MAKE) $(AM_MAKEFLAGS) distdir-am
627
628distdir-am: $(DISTFILES)
629	$(am__remove_distdir)
630	test -d "$(distdir)" || mkdir "$(distdir)"
631	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
632	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
633	list='$(DISTFILES)'; \
634	  dist_files=`for file in $$list; do echo $$file; done | \
635	  sed -e "s|^$$srcdirstrip/||;t" \
636	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
637	case $$dist_files in \
638	  */*) $(MKDIR_P) `echo "$$dist_files" | \
639			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
640			   sort -u` ;; \
641	esac; \
642	for file in $$dist_files; do \
643	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
644	  if test -d $$d/$$file; then \
645	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
646	    if test -d "$(distdir)/$$file"; then \
647	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
648	    fi; \
649	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
650	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
651	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
652	    fi; \
653	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
654	  else \
655	    test -f "$(distdir)/$$file" \
656	    || cp -p $$d/$$file "$(distdir)/$$file" \
657	    || exit 1; \
658	  fi; \
659	done
660	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
661	  if test "$$subdir" = .; then :; else \
662	    $(am__make_dryrun) \
663	      || test -d "$(distdir)/$$subdir" \
664	      || $(MKDIR_P) "$(distdir)/$$subdir" \
665	      || exit 1; \
666	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
667	    $(am__relativize); \
668	    new_distdir=$$reldir; \
669	    dir1=$$subdir; dir2="$(top_distdir)"; \
670	    $(am__relativize); \
671	    new_top_distdir=$$reldir; \
672	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
673	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
674	    ($(am__cd) $$subdir && \
675	      $(MAKE) $(AM_MAKEFLAGS) \
676	        top_distdir="$$new_top_distdir" \
677	        distdir="$$new_distdir" \
678		am__remove_distdir=: \
679		am__skip_length_check=: \
680		am__skip_mode_fix=: \
681	        distdir) \
682	      || exit 1; \
683	  fi; \
684	done
685	$(MAKE) $(AM_MAKEFLAGS) \
686	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
687	  dist-hook
688	-test -n "$(am__skip_mode_fix)" \
689	|| find "$(distdir)" -type d ! -perm -755 \
690		-exec chmod u+rwx,go+rx {} \; -o \
691	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
692	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
693	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
694	|| chmod -R a+r "$(distdir)"
695dist-gzip: distdir
696	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
697	$(am__post_remove_distdir)
698
699dist-bzip2: distdir
700	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
701	$(am__post_remove_distdir)
702
703dist-lzip: distdir
704	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
705	$(am__post_remove_distdir)
706dist-xz: distdir
707	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
708	$(am__post_remove_distdir)
709
710dist-zstd: distdir
711	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
712	$(am__post_remove_distdir)
713
714dist-tarZ: distdir
715	@echo WARNING: "Support for distribution archives compressed with" \
716		       "legacy program 'compress' is deprecated." >&2
717	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
718	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
719	$(am__post_remove_distdir)
720
721dist-shar: distdir
722	@echo WARNING: "Support for shar distribution archives is" \
723	               "deprecated." >&2
724	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
725	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
726	$(am__post_remove_distdir)
727
728dist-zip: distdir
729	-rm -f $(distdir).zip
730	zip -rq $(distdir).zip $(distdir)
731	$(am__post_remove_distdir)
732
733dist dist-all:
734	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
735	$(am__post_remove_distdir)
736
737# This target untars the dist file and tries a VPATH configuration.  Then
738# it guarantees that the distribution is self-contained by making another
739# tarfile.
740distcheck: dist
741	case '$(DIST_ARCHIVES)' in \
742	*.tar.gz*) \
743	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
744	*.tar.bz2*) \
745	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
746	*.tar.lz*) \
747	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
748	*.tar.xz*) \
749	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
750	*.tar.Z*) \
751	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
752	*.shar.gz*) \
753	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
754	*.zip*) \
755	  unzip $(distdir).zip ;;\
756	*.tar.zst*) \
757	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
758	esac
759	chmod -R a-w $(distdir)
760	chmod u+w $(distdir)
761	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
762	chmod a-w $(distdir)
763	test -d $(distdir)/_build || exit 0; \
764	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
765	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
766	  && am__cwd=`pwd` \
767	  && $(am__cd) $(distdir)/_build/sub \
768	  && ../../configure \
769	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
770	    $(DISTCHECK_CONFIGURE_FLAGS) \
771	    --srcdir=../.. --prefix="$$dc_install_base" \
772	  && $(MAKE) $(AM_MAKEFLAGS) \
773	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
774	  && $(MAKE) $(AM_MAKEFLAGS) check \
775	  && $(MAKE) $(AM_MAKEFLAGS) install \
776	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
777	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
778	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
779	        distuninstallcheck \
780	  && chmod -R a-w "$$dc_install_base" \
781	  && ({ \
782	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
783	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
784	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
785	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
786	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
787	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
788	  && rm -rf "$$dc_destdir" \
789	  && $(MAKE) $(AM_MAKEFLAGS) dist \
790	  && rm -rf $(DIST_ARCHIVES) \
791	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
792	  && cd "$$am__cwd" \
793	  || exit 1
794	$(am__post_remove_distdir)
795	@(echo "$(distdir) archives ready for distribution: "; \
796	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
797	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
798distuninstallcheck:
799	@test -n '$(distuninstallcheck_dir)' || { \
800	  echo 'ERROR: trying to run $@ with an empty' \
801	       '$$(distuninstallcheck_dir)' >&2; \
802	  exit 1; \
803	}; \
804	$(am__cd) '$(distuninstallcheck_dir)' || { \
805	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
806	  exit 1; \
807	}; \
808	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
809	   || { echo "ERROR: files left after uninstall:" ; \
810	        if test -n "$(DESTDIR)"; then \
811	          echo "  (check DESTDIR support)"; \
812	        fi ; \
813	        $(distuninstallcheck_listfiles) ; \
814	        exit 1; } >&2
815distcleancheck: distclean
816	@if test '$(srcdir)' = . ; then \
817	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
818	  exit 1 ; \
819	fi
820	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
821	  || { echo "ERROR: files left in build directory after distclean:" ; \
822	       $(distcleancheck_listfiles) ; \
823	       exit 1; } >&2
824check-am: all-am
825check: check-recursive
826all-am: Makefile $(PROGRAMS) config.h
827installdirs: installdirs-recursive
828installdirs-am:
829	for dir in "$(DESTDIR)$(bindir)"; do \
830	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
831	done
832install: install-recursive
833install-exec: install-exec-recursive
834install-data: install-data-recursive
835uninstall: uninstall-recursive
836
837install-am: all-am
838	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
839
840installcheck: installcheck-recursive
841install-strip:
842	if test -z '$(STRIP)'; then \
843	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
844	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
845	      install; \
846	else \
847	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
848	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
849	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
850	fi
851mostlyclean-generic:
852
853clean-generic:
854
855distclean-generic:
856	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
857	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
858
859maintainer-clean-generic:
860	@echo "This command is intended for maintainers to use"
861	@echo "it deletes files that may require special tools to rebuild."
862	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
863clean: clean-recursive
864
865clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
866
867distclean: distclean-recursive
868	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
869		-rm -f ./$(DEPDIR)/Eyes.Po
870	-rm -f ./$(DEPDIR)/transform.Po
871	-rm -f ./$(DEPDIR)/xeyes.Po
872	-rm -f Makefile
873distclean-am: clean-am distclean-compile distclean-generic \
874	distclean-hdr distclean-tags
875
876dvi: dvi-recursive
877
878dvi-am:
879
880html: html-recursive
881
882html-am:
883
884info: info-recursive
885
886info-am:
887
888install-data-am:
889
890install-dvi: install-dvi-recursive
891
892install-dvi-am:
893
894install-exec-am: install-binPROGRAMS
895
896install-html: install-html-recursive
897
898install-html-am:
899
900install-info: install-info-recursive
901
902install-info-am:
903
904install-man:
905
906install-pdf: install-pdf-recursive
907
908install-pdf-am:
909
910install-ps: install-ps-recursive
911
912install-ps-am:
913
914installcheck-am:
915
916maintainer-clean: maintainer-clean-recursive
917	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
918	-rm -rf $(top_srcdir)/autom4te.cache
919		-rm -f ./$(DEPDIR)/Eyes.Po
920	-rm -f ./$(DEPDIR)/transform.Po
921	-rm -f ./$(DEPDIR)/xeyes.Po
922	-rm -f Makefile
923maintainer-clean-am: distclean-am maintainer-clean-generic
924
925mostlyclean: mostlyclean-recursive
926
927mostlyclean-am: mostlyclean-compile mostlyclean-generic
928
929pdf: pdf-recursive
930
931pdf-am:
932
933ps: ps-recursive
934
935ps-am:
936
937uninstall-am: uninstall-binPROGRAMS
938
939.MAKE: $(am__recursive_targets) all install-am install-strip
940
941.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
942	am--depfiles am--refresh check check-am clean \
943	clean-binPROGRAMS clean-cscope clean-generic cscope \
944	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
945	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
946	dist-zip dist-zstd distcheck distclean distclean-compile \
947	distclean-generic distclean-hdr distclean-tags distcleancheck \
948	distdir distuninstallcheck dvi dvi-am html html-am info \
949	info-am install install-am install-binPROGRAMS install-data \
950	install-data-am install-dvi install-dvi-am install-exec \
951	install-exec-am install-html install-html-am install-info \
952	install-info-am install-man install-pdf install-pdf-am \
953	install-ps install-ps-am install-strip installcheck \
954	installcheck-am installdirs installdirs-am maintainer-clean \
955	maintainer-clean-generic mostlyclean mostlyclean-compile \
956	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
957	uninstall-am uninstall-binPROGRAMS
958
959.PRECIOUS: Makefile
960
961
962.PHONY: ChangeLog INSTALL
963
964INSTALL:
965	$(INSTALL_CMD)
966
967ChangeLog:
968	$(CHANGELOG_CMD)
969
970dist-hook: ChangeLog INSTALL
971
972# Tell versions [3.59,3.63) of GNU make to not export all variables.
973# Otherwise a system limit (for SysV at least) may be exceeded.
974.NOEXPORT:
975