1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#  Copyright 2005 Adam Jackson.
18#
19#  Permission is hereby granted, free of charge, to any person obtaining a
20#  copy of this software and associated documentation files (the "Software"),
21#  to deal in the Software without restriction, including without limitation
22#  on the rights to use, copy, modify, merge, publish, distribute, sub
23#  license, and/or sell copies of the Software, and to permit persons to whom
24#  the Software is furnished to do so, subject to the following conditions:
25#
26#  The above copyright notice and this permission notice (including the next
27#  paragraph) shall be included in all copies or substantial portions of the
28#  Software.
29#
30#  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
31#  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
32#  FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.  IN NO EVENT SHALL
33#  ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
34#  IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
35#  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
36
37VPATH = @srcdir@
38am__is_gnu_make = { \
39  if test -z '$(MAKELEVEL)'; then \
40    false; \
41  elif test -n '$(MAKE_HOST)'; then \
42    true; \
43  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
44    true; \
45  else \
46    false; \
47  fi; \
48}
49am__make_running_with_option = \
50  case $${target_option-} in \
51      ?) ;; \
52      *) echo "am__make_running_with_option: internal error: invalid" \
53              "target option '$${target_option-}' specified" >&2; \
54         exit 1;; \
55  esac; \
56  has_opt=no; \
57  sane_makeflags=$$MAKEFLAGS; \
58  if $(am__is_gnu_make); then \
59    sane_makeflags=$$MFLAGS; \
60  else \
61    case $$MAKEFLAGS in \
62      *\\[\ \	]*) \
63        bs=\\; \
64        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
65          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
66    esac; \
67  fi; \
68  skip_next=no; \
69  strip_trailopt () \
70  { \
71    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
72  }; \
73  for flg in $$sane_makeflags; do \
74    test $$skip_next = yes && { skip_next=no; continue; }; \
75    case $$flg in \
76      *=*|--*) continue;; \
77        -*I) strip_trailopt 'I'; skip_next=yes;; \
78      -*I?*) strip_trailopt 'I';; \
79        -*O) strip_trailopt 'O'; skip_next=yes;; \
80      -*O?*) strip_trailopt 'O';; \
81        -*l) strip_trailopt 'l'; skip_next=yes;; \
82      -*l?*) strip_trailopt 'l';; \
83      -[dEDm]) skip_next=yes;; \
84      -[JT]) skip_next=yes;; \
85    esac; \
86    case $$flg in \
87      *$$target_option*) has_opt=yes; break;; \
88    esac; \
89  done; \
90  test $$has_opt = yes
91am__make_dryrun = (target_option=n; $(am__make_running_with_option))
92am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
93pkgdatadir = $(datadir)/@PACKAGE@
94pkgincludedir = $(includedir)/@PACKAGE@
95pkglibdir = $(libdir)/@PACKAGE@
96pkglibexecdir = $(libexecdir)/@PACKAGE@
97am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
98install_sh_DATA = $(install_sh) -c -m 644
99install_sh_PROGRAM = $(install_sh) -c
100install_sh_SCRIPT = $(install_sh) -c
101INSTALL_HEADER = $(INSTALL_DATA)
102transform = $(program_transform_name)
103NORMAL_INSTALL = :
104PRE_INSTALL = :
105POST_INSTALL = :
106NORMAL_UNINSTALL = :
107PRE_UNINSTALL = :
108POST_UNINSTALL = :
109build_triplet = @build@
110host_triplet = @host@
111subdir = .
112ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
113am__aclocal_m4_deps = $(top_srcdir)/configure.ac
114am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
115	$(ACLOCAL_M4)
116DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
117	$(am__configure_deps) $(am__DIST_COMMON)
118am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
119 configure.lineno config.status.lineno
120mkinstalldirs = $(install_sh) -d
121CONFIG_HEADER = config.h
122CONFIG_CLEAN_FILES = xorg-mouse.pc
123CONFIG_CLEAN_VPATH_FILES =
124AM_V_P = $(am__v_P_@AM_V@)
125am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
126am__v_P_0 = false
127am__v_P_1 = :
128AM_V_GEN = $(am__v_GEN_@AM_V@)
129am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
130am__v_GEN_0 = @echo "  GEN     " $@;
131am__v_GEN_1 = 
132AM_V_at = $(am__v_at_@AM_V@)
133am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
134am__v_at_0 = @
135am__v_at_1 = 
136SOURCES =
137DIST_SOURCES =
138RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
139	ctags-recursive dvi-recursive html-recursive info-recursive \
140	install-data-recursive install-dvi-recursive \
141	install-exec-recursive install-html-recursive \
142	install-info-recursive install-pdf-recursive \
143	install-ps-recursive install-recursive installcheck-recursive \
144	installdirs-recursive pdf-recursive ps-recursive \
145	tags-recursive uninstall-recursive
146am__can_run_installinfo = \
147  case $$AM_UPDATE_INFO_DIR in \
148    n|no|NO) false;; \
149    *) (install-info --version) >/dev/null 2>&1;; \
150  esac
151am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
152am__vpath_adj = case $$p in \
153    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
154    *) f=$$p;; \
155  esac;
156am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
157am__install_max = 40
158am__nobase_strip_setup = \
159  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
160am__nobase_strip = \
161  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
162am__nobase_list = $(am__nobase_strip_setup); \
163  for p in $$list; do echo "$$p $$p"; done | \
164  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
165  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
166    if (++n[$$2] == $(am__install_max)) \
167      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
168    END { for (dir in files) print dir, files[dir] }'
169am__base_list = \
170  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
171  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
172am__uninstall_files_from_dir = { \
173  test -z "$$files" \
174    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
175    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
176         $(am__cd) "$$dir" && rm -f $$files; }; \
177  }
178am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
179DATA = $(pkgconfig_DATA)
180RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
181  distclean-recursive maintainer-clean-recursive
182am__recursive_targets = \
183  $(RECURSIVE_TARGETS) \
184  $(RECURSIVE_CLEAN_TARGETS) \
185  $(am__extra_recursive_targets)
186AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
187	cscope distdir distdir-am dist dist-all distcheck
188am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
189	config.h.in
190# Read a list of newline-separated strings from the standard input,
191# and print each of them once, without duplicates.  Input order is
192# *not* preserved.
193am__uniquify_input = $(AWK) '\
194  BEGIN { nonempty = 0; } \
195  { items[$$0] = 1; nonempty = 1; } \
196  END { if (nonempty) { for (i in items) print i; }; } \
197'
198# Make sure the list of sources is unique.  This is necessary because,
199# e.g., the same source file might be shared among _SOURCES variables
200# for different programs/libraries.
201am__define_uniq_tagged_files = \
202  list='$(am__tagged_files)'; \
203  unique=`for i in $$list; do \
204    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
205  done | $(am__uniquify_input)`
206DIST_SUBDIRS = $(SUBDIRS)
207am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
208	$(srcdir)/xorg-mouse.pc.in COPYING ChangeLog INSTALL README \
209	compile config.guess config.sub install-sh ltmain.sh missing
210DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
211distdir = $(PACKAGE)-$(VERSION)
212top_distdir = $(distdir)
213am__remove_distdir = \
214  if test -d "$(distdir)"; then \
215    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
216      && rm -rf "$(distdir)" \
217      || { sleep 5 && rm -rf "$(distdir)"; }; \
218  else :; fi
219am__post_remove_distdir = $(am__remove_distdir)
220am__relativize = \
221  dir0=`pwd`; \
222  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
223  sed_rest='s,^[^/]*/*,,'; \
224  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
225  sed_butlast='s,/*[^/]*$$,,'; \
226  while test -n "$$dir1"; do \
227    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
228    if test "$$first" != "."; then \
229      if test "$$first" = ".."; then \
230        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
231        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
232      else \
233        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
234        if test "$$first2" = "$$first"; then \
235          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
236        else \
237          dir2="../$$dir2"; \
238        fi; \
239        dir0="$$dir0"/"$$first"; \
240      fi; \
241    fi; \
242    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
243  done; \
244  reldir="$$dir2"
245DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
246GZIP_ENV = --best
247DIST_TARGETS = dist-xz dist-gzip
248# Exists only to be overridden by the user if desired.
249AM_DISTCHECK_DVI_TARGET = dvi
250distuninstallcheck_listfiles = find . -type f -print
251am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
252  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
253distcleancheck_listfiles = find . -type f -print
254ACLOCAL = @ACLOCAL@
255ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
256ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
257AMTAR = @AMTAR@
258AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
259APP_MAN_DIR = @APP_MAN_DIR@
260APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
261AR = @AR@
262AUTOCONF = @AUTOCONF@
263AUTOHEADER = @AUTOHEADER@
264AUTOMAKE = @AUTOMAKE@
265AWK = @AWK@
266BASE_CFLAGS = @BASE_CFLAGS@
267CC = @CC@
268CCDEPMODE = @CCDEPMODE@
269CFLAGS = @CFLAGS@
270CHANGELOG_CMD = @CHANGELOG_CMD@
271CPPFLAGS = @CPPFLAGS@
272CSCOPE = @CSCOPE@
273CTAGS = @CTAGS@
274CWARNFLAGS = @CWARNFLAGS@
275CYGPATH_W = @CYGPATH_W@
276DEFS = @DEFS@
277DEPDIR = @DEPDIR@
278DLLTOOL = @DLLTOOL@
279DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
280DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
281DRIVER_NAME = @DRIVER_NAME@
282DSYMUTIL = @DSYMUTIL@
283DUMPBIN = @DUMPBIN@
284ECHO_C = @ECHO_C@
285ECHO_N = @ECHO_N@
286ECHO_T = @ECHO_T@
287EGREP = @EGREP@
288ETAGS = @ETAGS@
289EXEEXT = @EXEEXT@
290FGREP = @FGREP@
291FILECMD = @FILECMD@
292FILE_MAN_DIR = @FILE_MAN_DIR@
293FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
294GREP = @GREP@
295INSTALL = @INSTALL@
296INSTALL_CMD = @INSTALL_CMD@
297INSTALL_DATA = @INSTALL_DATA@
298INSTALL_PROGRAM = @INSTALL_PROGRAM@
299INSTALL_SCRIPT = @INSTALL_SCRIPT@
300INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
301LD = @LD@
302LDFLAGS = @LDFLAGS@
303LIBOBJS = @LIBOBJS@
304LIBS = @LIBS@
305LIBTOOL = @LIBTOOL@
306LIB_MAN_DIR = @LIB_MAN_DIR@
307LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
308LINT = @LINT@
309LINT_FLAGS = @LINT_FLAGS@
310LIPO = @LIPO@
311LN_S = @LN_S@
312LTLIBOBJS = @LTLIBOBJS@
313LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
314MAKEINFO = @MAKEINFO@
315MANIFEST_TOOL = @MANIFEST_TOOL@
316MAN_SUBSTS = @MAN_SUBSTS@
317MISC_MAN_DIR = @MISC_MAN_DIR@
318MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
319MKDIR_P = @MKDIR_P@
320NM = @NM@
321NMEDIT = @NMEDIT@
322OBJDUMP = @OBJDUMP@
323OBJEXT = @OBJEXT@
324OS_MOUSE_NAME = @OS_MOUSE_NAME@
325OTOOL = @OTOOL@
326OTOOL64 = @OTOOL64@
327PACKAGE = @PACKAGE@
328PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
329PACKAGE_NAME = @PACKAGE_NAME@
330PACKAGE_STRING = @PACKAGE_STRING@
331PACKAGE_TARNAME = @PACKAGE_TARNAME@
332PACKAGE_URL = @PACKAGE_URL@
333PACKAGE_VERSION = @PACKAGE_VERSION@
334PATH_SEPARATOR = @PATH_SEPARATOR@
335PKG_CONFIG = @PKG_CONFIG@
336PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
337PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
338RANLIB = @RANLIB@
339SED = @SED@
340SET_MAKE = @SET_MAKE@
341SHELL = @SHELL@
342STRICT_CFLAGS = @STRICT_CFLAGS@
343STRIP = @STRIP@
344VERSION = @VERSION@
345XORG_CFLAGS = @XORG_CFLAGS@
346XORG_LIBS = @XORG_LIBS@
347XORG_MAN_PAGE = @XORG_MAN_PAGE@
348abs_builddir = @abs_builddir@
349abs_srcdir = @abs_srcdir@
350abs_top_builddir = @abs_top_builddir@
351abs_top_srcdir = @abs_top_srcdir@
352ac_ct_AR = @ac_ct_AR@
353ac_ct_CC = @ac_ct_CC@
354ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
355am__include = @am__include@
356am__leading_dot = @am__leading_dot@
357am__quote = @am__quote@
358am__tar = @am__tar@
359am__untar = @am__untar@
360bindir = @bindir@
361build = @build@
362build_alias = @build_alias@
363build_cpu = @build_cpu@
364build_os = @build_os@
365build_vendor = @build_vendor@
366builddir = @builddir@
367datadir = @datadir@
368datarootdir = @datarootdir@
369docdir = @docdir@
370dvidir = @dvidir@
371exec_prefix = @exec_prefix@
372host = @host@
373host_alias = @host_alias@
374host_cpu = @host_cpu@
375host_os = @host_os@
376host_vendor = @host_vendor@
377htmldir = @htmldir@
378includedir = @includedir@
379infodir = @infodir@
380inputdir = @inputdir@
381install_sh = @install_sh@
382libdir = @libdir@
383libexecdir = @libexecdir@
384localedir = @localedir@
385localstatedir = @localstatedir@
386mandir = @mandir@
387mkdir_p = @mkdir_p@
388oldincludedir = @oldincludedir@
389pdfdir = @pdfdir@
390prefix = @prefix@
391program_transform_name = @program_transform_name@
392psdir = @psdir@
393runstatedir = @runstatedir@
394sbindir = @sbindir@
395sdkdir = @sdkdir@
396sharedstatedir = @sharedstatedir@
397srcdir = @srcdir@
398sysconfdir = @sysconfdir@
399target_alias = @target_alias@
400top_build_prefix = @top_build_prefix@
401top_builddir = @top_builddir@
402top_srcdir = @top_srcdir@
403SUBDIRS = include src man
404MAINTAINERCLEANFILES = ChangeLog INSTALL
405pkgconfigdir = $(libdir)/pkgconfig
406pkgconfig_DATA = xorg-mouse.pc
407
408# Provide an sdk location that is writable by this module
409DISTCHECK_CONFIGURE_FLAGS = --with-sdkdir='$${includedir}/xorg'
410all: config.h
411	$(MAKE) $(AM_MAKEFLAGS) all-recursive
412
413.SUFFIXES:
414am--refresh: Makefile
415	@:
416$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
417	@for dep in $?; do \
418	  case '$(am__configure_deps)' in \
419	    *$$dep*) \
420	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
421	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
422		&& exit 0; \
423	      exit 1;; \
424	  esac; \
425	done; \
426	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
427	$(am__cd) $(top_srcdir) && \
428	  $(AUTOMAKE) --foreign Makefile
429Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
430	@case '$?' in \
431	  *config.status*) \
432	    echo ' $(SHELL) ./config.status'; \
433	    $(SHELL) ./config.status;; \
434	  *) \
435	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
436	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
437	esac;
438
439$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
440	$(SHELL) ./config.status --recheck
441
442$(top_srcdir)/configure:  $(am__configure_deps)
443	$(am__cd) $(srcdir) && $(AUTOCONF)
444$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
445	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
446$(am__aclocal_m4_deps):
447
448config.h: stamp-h1
449	@test -f $@ || rm -f stamp-h1
450	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
451
452stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
453	@rm -f stamp-h1
454	cd $(top_builddir) && $(SHELL) ./config.status config.h
455$(srcdir)/config.h.in:  $(am__configure_deps) 
456	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
457	rm -f stamp-h1
458	touch $@
459
460distclean-hdr:
461	-rm -f config.h stamp-h1
462xorg-mouse.pc: $(top_builddir)/config.status $(srcdir)/xorg-mouse.pc.in
463	cd $(top_builddir) && $(SHELL) ./config.status $@
464
465mostlyclean-libtool:
466	-rm -f *.lo
467
468clean-libtool:
469	-rm -rf .libs _libs
470
471distclean-libtool:
472	-rm -f libtool config.lt
473install-pkgconfigDATA: $(pkgconfig_DATA)
474	@$(NORMAL_INSTALL)
475	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
476	if test -n "$$list"; then \
477	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
478	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
479	fi; \
480	for p in $$list; do \
481	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
482	  echo "$$d$$p"; \
483	done | $(am__base_list) | \
484	while read files; do \
485	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
486	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
487	done
488
489uninstall-pkgconfigDATA:
490	@$(NORMAL_UNINSTALL)
491	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
492	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
493	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
494
495# This directory's subdirectories are mostly independent; you can cd
496# into them and run 'make' without going through this Makefile.
497# To change the values of 'make' variables: instead of editing Makefiles,
498# (1) if the variable is set in 'config.status', edit 'config.status'
499#     (which will cause the Makefiles to be regenerated when you run 'make');
500# (2) otherwise, pass the desired values on the 'make' command line.
501$(am__recursive_targets):
502	@fail=; \
503	if $(am__make_keepgoing); then \
504	  failcom='fail=yes'; \
505	else \
506	  failcom='exit 1'; \
507	fi; \
508	dot_seen=no; \
509	target=`echo $@ | sed s/-recursive//`; \
510	case "$@" in \
511	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
512	  *) list='$(SUBDIRS)' ;; \
513	esac; \
514	for subdir in $$list; do \
515	  echo "Making $$target in $$subdir"; \
516	  if test "$$subdir" = "."; then \
517	    dot_seen=yes; \
518	    local_target="$$target-am"; \
519	  else \
520	    local_target="$$target"; \
521	  fi; \
522	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
523	  || eval $$failcom; \
524	done; \
525	if test "$$dot_seen" = "no"; then \
526	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
527	fi; test -z "$$fail"
528
529ID: $(am__tagged_files)
530	$(am__define_uniq_tagged_files); mkid -fID $$unique
531tags: tags-recursive
532TAGS: tags
533
534tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
535	set x; \
536	here=`pwd`; \
537	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
538	  include_option=--etags-include; \
539	  empty_fix=.; \
540	else \
541	  include_option=--include; \
542	  empty_fix=; \
543	fi; \
544	list='$(SUBDIRS)'; for subdir in $$list; do \
545	  if test "$$subdir" = .; then :; else \
546	    test ! -f $$subdir/TAGS || \
547	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
548	  fi; \
549	done; \
550	$(am__define_uniq_tagged_files); \
551	shift; \
552	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
553	  test -n "$$unique" || unique=$$empty_fix; \
554	  if test $$# -gt 0; then \
555	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
556	      "$$@" $$unique; \
557	  else \
558	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
559	      $$unique; \
560	  fi; \
561	fi
562ctags: ctags-recursive
563
564CTAGS: ctags
565ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
566	$(am__define_uniq_tagged_files); \
567	test -z "$(CTAGS_ARGS)$$unique" \
568	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
569	     $$unique
570
571GTAGS:
572	here=`$(am__cd) $(top_builddir) && pwd` \
573	  && $(am__cd) $(top_srcdir) \
574	  && gtags -i $(GTAGS_ARGS) "$$here"
575cscope: cscope.files
576	test ! -s cscope.files \
577	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
578clean-cscope:
579	-rm -f cscope.files
580cscope.files: clean-cscope cscopelist
581cscopelist: cscopelist-recursive
582
583cscopelist-am: $(am__tagged_files)
584	list='$(am__tagged_files)'; \
585	case "$(srcdir)" in \
586	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
587	  *) sdir=$(subdir)/$(srcdir) ;; \
588	esac; \
589	for i in $$list; do \
590	  if test -f "$$i"; then \
591	    echo "$(subdir)/$$i"; \
592	  else \
593	    echo "$$sdir/$$i"; \
594	  fi; \
595	done >> $(top_builddir)/cscope.files
596
597distclean-tags:
598	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
599	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
600distdir: $(BUILT_SOURCES)
601	$(MAKE) $(AM_MAKEFLAGS) distdir-am
602
603distdir-am: $(DISTFILES)
604	$(am__remove_distdir)
605	test -d "$(distdir)" || mkdir "$(distdir)"
606	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
607	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
608	list='$(DISTFILES)'; \
609	  dist_files=`for file in $$list; do echo $$file; done | \
610	  sed -e "s|^$$srcdirstrip/||;t" \
611	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
612	case $$dist_files in \
613	  */*) $(MKDIR_P) `echo "$$dist_files" | \
614			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
615			   sort -u` ;; \
616	esac; \
617	for file in $$dist_files; do \
618	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
619	  if test -d $$d/$$file; then \
620	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
621	    if test -d "$(distdir)/$$file"; then \
622	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
623	    fi; \
624	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
625	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
626	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
627	    fi; \
628	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
629	  else \
630	    test -f "$(distdir)/$$file" \
631	    || cp -p $$d/$$file "$(distdir)/$$file" \
632	    || exit 1; \
633	  fi; \
634	done
635	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
636	  if test "$$subdir" = .; then :; else \
637	    $(am__make_dryrun) \
638	      || test -d "$(distdir)/$$subdir" \
639	      || $(MKDIR_P) "$(distdir)/$$subdir" \
640	      || exit 1; \
641	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
642	    $(am__relativize); \
643	    new_distdir=$$reldir; \
644	    dir1=$$subdir; dir2="$(top_distdir)"; \
645	    $(am__relativize); \
646	    new_top_distdir=$$reldir; \
647	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
648	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
649	    ($(am__cd) $$subdir && \
650	      $(MAKE) $(AM_MAKEFLAGS) \
651	        top_distdir="$$new_top_distdir" \
652	        distdir="$$new_distdir" \
653		am__remove_distdir=: \
654		am__skip_length_check=: \
655		am__skip_mode_fix=: \
656	        distdir) \
657	      || exit 1; \
658	  fi; \
659	done
660	$(MAKE) $(AM_MAKEFLAGS) \
661	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
662	  dist-hook
663	-test -n "$(am__skip_mode_fix)" \
664	|| find "$(distdir)" -type d ! -perm -755 \
665		-exec chmod u+rwx,go+rx {} \; -o \
666	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
667	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
668	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
669	|| chmod -R a+r "$(distdir)"
670dist-gzip: distdir
671	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
672	$(am__post_remove_distdir)
673
674dist-bzip2: distdir
675	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
676	$(am__post_remove_distdir)
677
678dist-lzip: distdir
679	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
680	$(am__post_remove_distdir)
681dist-xz: distdir
682	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
683	$(am__post_remove_distdir)
684
685dist-zstd: distdir
686	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
687	$(am__post_remove_distdir)
688
689dist-tarZ: distdir
690	@echo WARNING: "Support for distribution archives compressed with" \
691		       "legacy program 'compress' is deprecated." >&2
692	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
693	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
694	$(am__post_remove_distdir)
695
696dist-shar: distdir
697	@echo WARNING: "Support for shar distribution archives is" \
698	               "deprecated." >&2
699	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
700	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
701	$(am__post_remove_distdir)
702
703dist-zip: distdir
704	-rm -f $(distdir).zip
705	zip -rq $(distdir).zip $(distdir)
706	$(am__post_remove_distdir)
707
708dist dist-all:
709	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
710	$(am__post_remove_distdir)
711
712# This target untars the dist file and tries a VPATH configuration.  Then
713# it guarantees that the distribution is self-contained by making another
714# tarfile.
715distcheck: dist
716	case '$(DIST_ARCHIVES)' in \
717	*.tar.gz*) \
718	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
719	*.tar.bz2*) \
720	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
721	*.tar.lz*) \
722	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
723	*.tar.xz*) \
724	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
725	*.tar.Z*) \
726	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
727	*.shar.gz*) \
728	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
729	*.zip*) \
730	  unzip $(distdir).zip ;;\
731	*.tar.zst*) \
732	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
733	esac
734	chmod -R a-w $(distdir)
735	chmod u+w $(distdir)
736	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
737	chmod a-w $(distdir)
738	test -d $(distdir)/_build || exit 0; \
739	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
740	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
741	  && am__cwd=`pwd` \
742	  && $(am__cd) $(distdir)/_build/sub \
743	  && ../../configure \
744	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
745	    $(DISTCHECK_CONFIGURE_FLAGS) \
746	    --srcdir=../.. --prefix="$$dc_install_base" \
747	  && $(MAKE) $(AM_MAKEFLAGS) \
748	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
749	  && $(MAKE) $(AM_MAKEFLAGS) check \
750	  && $(MAKE) $(AM_MAKEFLAGS) install \
751	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
752	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
753	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
754	        distuninstallcheck \
755	  && chmod -R a-w "$$dc_install_base" \
756	  && ({ \
757	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
758	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
759	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
760	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
761	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
762	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
763	  && rm -rf "$$dc_destdir" \
764	  && $(MAKE) $(AM_MAKEFLAGS) dist \
765	  && rm -rf $(DIST_ARCHIVES) \
766	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
767	  && cd "$$am__cwd" \
768	  || exit 1
769	$(am__post_remove_distdir)
770	@(echo "$(distdir) archives ready for distribution: "; \
771	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
772	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
773distuninstallcheck:
774	@test -n '$(distuninstallcheck_dir)' || { \
775	  echo 'ERROR: trying to run $@ with an empty' \
776	       '$$(distuninstallcheck_dir)' >&2; \
777	  exit 1; \
778	}; \
779	$(am__cd) '$(distuninstallcheck_dir)' || { \
780	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
781	  exit 1; \
782	}; \
783	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
784	   || { echo "ERROR: files left after uninstall:" ; \
785	        if test -n "$(DESTDIR)"; then \
786	          echo "  (check DESTDIR support)"; \
787	        fi ; \
788	        $(distuninstallcheck_listfiles) ; \
789	        exit 1; } >&2
790distcleancheck: distclean
791	@if test '$(srcdir)' = . ; then \
792	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
793	  exit 1 ; \
794	fi
795	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
796	  || { echo "ERROR: files left in build directory after distclean:" ; \
797	       $(distcleancheck_listfiles) ; \
798	       exit 1; } >&2
799check-am: all-am
800check: check-recursive
801all-am: Makefile $(DATA) config.h
802installdirs: installdirs-recursive
803installdirs-am:
804	for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
805	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
806	done
807install: install-recursive
808install-exec: install-exec-recursive
809install-data: install-data-recursive
810uninstall: uninstall-recursive
811
812install-am: all-am
813	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
814
815installcheck: installcheck-recursive
816install-strip:
817	if test -z '$(STRIP)'; then \
818	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
819	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
820	      install; \
821	else \
822	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
823	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
824	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
825	fi
826mostlyclean-generic:
827
828clean-generic:
829
830distclean-generic:
831	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
832	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
833
834maintainer-clean-generic:
835	@echo "This command is intended for maintainers to use"
836	@echo "it deletes files that may require special tools to rebuild."
837	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
838clean: clean-recursive
839
840clean-am: clean-generic clean-libtool mostlyclean-am
841
842distclean: distclean-recursive
843	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
844	-rm -f Makefile
845distclean-am: clean-am distclean-generic distclean-hdr \
846	distclean-libtool distclean-tags
847
848dvi: dvi-recursive
849
850dvi-am:
851
852html: html-recursive
853
854html-am:
855
856info: info-recursive
857
858info-am:
859
860install-data-am: install-pkgconfigDATA
861
862install-dvi: install-dvi-recursive
863
864install-dvi-am:
865
866install-exec-am:
867
868install-html: install-html-recursive
869
870install-html-am:
871
872install-info: install-info-recursive
873
874install-info-am:
875
876install-man:
877
878install-pdf: install-pdf-recursive
879
880install-pdf-am:
881
882install-ps: install-ps-recursive
883
884install-ps-am:
885
886installcheck-am:
887
888maintainer-clean: maintainer-clean-recursive
889	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
890	-rm -rf $(top_srcdir)/autom4te.cache
891	-rm -f Makefile
892maintainer-clean-am: distclean-am maintainer-clean-generic
893
894mostlyclean: mostlyclean-recursive
895
896mostlyclean-am: mostlyclean-generic mostlyclean-libtool
897
898pdf: pdf-recursive
899
900pdf-am:
901
902ps: ps-recursive
903
904ps-am:
905
906uninstall-am: uninstall-pkgconfigDATA
907
908.MAKE: $(am__recursive_targets) all install-am install-strip
909
910.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
911	am--refresh check check-am clean clean-cscope clean-generic \
912	clean-libtool cscope cscopelist-am ctags ctags-am dist \
913	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
914	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
915	distclean-generic distclean-hdr distclean-libtool \
916	distclean-tags distcleancheck distdir distuninstallcheck dvi \
917	dvi-am html html-am info info-am install install-am \
918	install-data install-data-am install-dvi install-dvi-am \
919	install-exec install-exec-am install-html install-html-am \
920	install-info install-info-am install-man install-pdf \
921	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
922	install-strip installcheck installcheck-am installdirs \
923	installdirs-am maintainer-clean maintainer-clean-generic \
924	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
925	ps ps-am tags tags-am uninstall uninstall-am \
926	uninstall-pkgconfigDATA
927
928.PRECIOUS: Makefile
929
930
931.PHONY: ChangeLog INSTALL
932
933INSTALL:
934	$(INSTALL_CMD)
935
936ChangeLog:
937	$(CHANGELOG_CMD)
938
939dist-hook: ChangeLog INSTALL
940
941# Check source code with tools like lint & sparse
942@LINT_TRUE@lint:
943@LINT_TRUE@	(cd src && $(MAKE) $(MAKEFLAGS) lint)
944
945# Tell versions [3.59,3.63) of GNU make to not export all variables.
946# Otherwise a system limit (for SysV at least) may be exceeded.
947.NOEXPORT:
948