1# Makefile.in generated by automake 1.16.5 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2021 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = { \ 38 if test -z '$(MAKELEVEL)'; then \ 39 false; \ 40 elif test -n '$(MAKE_HOST)'; then \ 41 true; \ 42 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 43 true; \ 44 else \ 45 false; \ 46 fi; \ 47} 48am__make_running_with_option = \ 49 case $${target_option-} in \ 50 ?) ;; \ 51 *) echo "am__make_running_with_option: internal error: invalid" \ 52 "target option '$${target_option-}' specified" >&2; \ 53 exit 1;; \ 54 esac; \ 55 has_opt=no; \ 56 sane_makeflags=$$MAKEFLAGS; \ 57 if $(am__is_gnu_make); then \ 58 sane_makeflags=$$MFLAGS; \ 59 else \ 60 case $$MAKEFLAGS in \ 61 *\\[\ \ ]*) \ 62 bs=\\; \ 63 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 64 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 65 esac; \ 66 fi; \ 67 skip_next=no; \ 68 strip_trailopt () \ 69 { \ 70 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 71 }; \ 72 for flg in $$sane_makeflags; do \ 73 test $$skip_next = yes && { skip_next=no; continue; }; \ 74 case $$flg in \ 75 *=*|--*) continue;; \ 76 -*I) strip_trailopt 'I'; skip_next=yes;; \ 77 -*I?*) strip_trailopt 'I';; \ 78 -*O) strip_trailopt 'O'; skip_next=yes;; \ 79 -*O?*) strip_trailopt 'O';; \ 80 -*l) strip_trailopt 'l'; skip_next=yes;; \ 81 -*l?*) strip_trailopt 'l';; \ 82 -[dEDm]) skip_next=yes;; \ 83 -[JT]) skip_next=yes;; \ 84 esac; \ 85 case $$flg in \ 86 *$$target_option*) has_opt=yes; break;; \ 87 esac; \ 88 done; \ 89 test $$has_opt = yes 90am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 91am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 92pkgdatadir = $(datadir)/@PACKAGE@ 93pkgincludedir = $(includedir)/@PACKAGE@ 94pkglibdir = $(libdir)/@PACKAGE@ 95pkglibexecdir = $(libexecdir)/@PACKAGE@ 96am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 97install_sh_DATA = $(install_sh) -c -m 644 98install_sh_PROGRAM = $(install_sh) -c 99install_sh_SCRIPT = $(install_sh) -c 100INSTALL_HEADER = $(INSTALL_DATA) 101transform = $(program_transform_name) 102NORMAL_INSTALL = : 103PRE_INSTALL = : 104POST_INSTALL = : 105NORMAL_UNINSTALL = : 106PRE_UNINSTALL = : 107POST_UNINSTALL = : 108build_triplet = @build@ 109host_triplet = @host@ 110subdir = . 111ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 112am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 113 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 114 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 115 $(top_srcdir)/configure.ac 116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 117 $(ACLOCAL_M4) 118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 119 $(am__configure_deps) $(am__DIST_COMMON) 120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 121 configure.lineno config.status.lineno 122mkinstalldirs = $(install_sh) -d 123CONFIG_HEADER = config.h 124CONFIG_CLEAN_FILES = 125CONFIG_CLEAN_VPATH_FILES = 126AM_V_P = $(am__v_P_@AM_V@) 127am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 128am__v_P_0 = false 129am__v_P_1 = : 130AM_V_GEN = $(am__v_GEN_@AM_V@) 131am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 132am__v_GEN_0 = @echo " GEN " $@; 133am__v_GEN_1 = 134AM_V_at = $(am__v_at_@AM_V@) 135am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 136am__v_at_0 = @ 137am__v_at_1 = 138SOURCES = 139DIST_SOURCES = 140RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 141 ctags-recursive dvi-recursive html-recursive info-recursive \ 142 install-data-recursive install-dvi-recursive \ 143 install-exec-recursive install-html-recursive \ 144 install-info-recursive install-pdf-recursive \ 145 install-ps-recursive install-recursive installcheck-recursive \ 146 installdirs-recursive pdf-recursive ps-recursive \ 147 tags-recursive uninstall-recursive 148am__can_run_installinfo = \ 149 case $$AM_UPDATE_INFO_DIR in \ 150 n|no|NO) false;; \ 151 *) (install-info --version) >/dev/null 2>&1;; \ 152 esac 153RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 154 distclean-recursive maintainer-clean-recursive 155am__recursive_targets = \ 156 $(RECURSIVE_TARGETS) \ 157 $(RECURSIVE_CLEAN_TARGETS) \ 158 $(am__extra_recursive_targets) 159AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 160 cscope distdir distdir-am dist dist-all distcheck 161am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \ 162 config.h.in 163# Read a list of newline-separated strings from the standard input, 164# and print each of them once, without duplicates. Input order is 165# *not* preserved. 166am__uniquify_input = $(AWK) '\ 167 BEGIN { nonempty = 0; } \ 168 { items[$$0] = 1; nonempty = 1; } \ 169 END { if (nonempty) { for (i in items) print i; }; } \ 170' 171# Make sure the list of sources is unique. This is necessary because, 172# e.g., the same source file might be shared among _SOURCES variables 173# for different programs/libraries. 174am__define_uniq_tagged_files = \ 175 list='$(am__tagged_files)'; \ 176 unique=`for i in $$list; do \ 177 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 178 done | $(am__uniquify_input)` 179DIST_SUBDIRS = $(SUBDIRS) 180am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \ 181 ChangeLog INSTALL README.md compile config.guess config.sub \ 182 install-sh ltmain.sh missing 183DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 184distdir = $(PACKAGE)-$(VERSION) 185top_distdir = $(distdir) 186am__remove_distdir = \ 187 if test -d "$(distdir)"; then \ 188 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 189 && rm -rf "$(distdir)" \ 190 || { sleep 5 && rm -rf "$(distdir)"; }; \ 191 else :; fi 192am__post_remove_distdir = $(am__remove_distdir) 193am__relativize = \ 194 dir0=`pwd`; \ 195 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 196 sed_rest='s,^[^/]*/*,,'; \ 197 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 198 sed_butlast='s,/*[^/]*$$,,'; \ 199 while test -n "$$dir1"; do \ 200 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 201 if test "$$first" != "."; then \ 202 if test "$$first" = ".."; then \ 203 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 204 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 205 else \ 206 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 207 if test "$$first2" = "$$first"; then \ 208 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 209 else \ 210 dir2="../$$dir2"; \ 211 fi; \ 212 dir0="$$dir0"/"$$first"; \ 213 fi; \ 214 fi; \ 215 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 216 done; \ 217 reldir="$$dir2" 218DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz 219GZIP_ENV = --best 220DIST_TARGETS = dist-xz dist-gzip 221# Exists only to be overridden by the user if desired. 222AM_DISTCHECK_DVI_TARGET = dvi 223distuninstallcheck_listfiles = find . -type f -print 224am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 225 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 226distcleancheck_listfiles = find . -type f -print 227ACLOCAL = @ACLOCAL@ 228ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 229ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 230AMTAR = @AMTAR@ 231AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 232APP_MAN_DIR = @APP_MAN_DIR@ 233APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 234AR = @AR@ 235AUTOCONF = @AUTOCONF@ 236AUTOHEADER = @AUTOHEADER@ 237AUTOMAKE = @AUTOMAKE@ 238AWK = @AWK@ 239BASE_CFLAGS = @BASE_CFLAGS@ 240CC = @CC@ 241CCDEPMODE = @CCDEPMODE@ 242CFLAGS = @CFLAGS@ 243CHANGELOG_CMD = @CHANGELOG_CMD@ 244CPPFLAGS = @CPPFLAGS@ 245CSCOPE = @CSCOPE@ 246CTAGS = @CTAGS@ 247CWARNFLAGS = @CWARNFLAGS@ 248CYGPATH_W = @CYGPATH_W@ 249DEFS = @DEFS@ 250DEPDIR = @DEPDIR@ 251DLLTOOL = @DLLTOOL@ 252DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 253DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 254DRIVER_NAME = @DRIVER_NAME@ 255DSYMUTIL = @DSYMUTIL@ 256DUMPBIN = @DUMPBIN@ 257ECHO_C = @ECHO_C@ 258ECHO_N = @ECHO_N@ 259ECHO_T = @ECHO_T@ 260EGREP = @EGREP@ 261ETAGS = @ETAGS@ 262EXEEXT = @EXEEXT@ 263FGREP = @FGREP@ 264FILE_MAN_DIR = @FILE_MAN_DIR@ 265FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 266GBM_CFLAGS = @GBM_CFLAGS@ 267GBM_LIBS = @GBM_LIBS@ 268GREP = @GREP@ 269INSTALL = @INSTALL@ 270INSTALL_CMD = @INSTALL_CMD@ 271INSTALL_DATA = @INSTALL_DATA@ 272INSTALL_PROGRAM = @INSTALL_PROGRAM@ 273INSTALL_SCRIPT = @INSTALL_SCRIPT@ 274INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 275LD = @LD@ 276LDFLAGS = @LDFLAGS@ 277LIBDRM_AMDGPU_CFLAGS = @LIBDRM_AMDGPU_CFLAGS@ 278LIBDRM_AMDGPU_LIBS = @LIBDRM_AMDGPU_LIBS@ 279LIBDRM_CFLAGS = @LIBDRM_CFLAGS@ 280LIBDRM_LIBS = @LIBDRM_LIBS@ 281LIBGLAMOR_CFLAGS = @LIBGLAMOR_CFLAGS@ 282LIBGLAMOR_EGL_CFLAGS = @LIBGLAMOR_EGL_CFLAGS@ 283LIBGLAMOR_EGL_LIBS = @LIBGLAMOR_EGL_LIBS@ 284LIBGLAMOR_LIBS = @LIBGLAMOR_LIBS@ 285LIBGL_CFLAGS = @LIBGL_CFLAGS@ 286LIBGL_LIBS = @LIBGL_LIBS@ 287LIBOBJS = @LIBOBJS@ 288LIBS = @LIBS@ 289LIBTOOL = @LIBTOOL@ 290LIBUDEV_CFLAGS = @LIBUDEV_CFLAGS@ 291LIBUDEV_LIBS = @LIBUDEV_LIBS@ 292LIB_MAN_DIR = @LIB_MAN_DIR@ 293LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 294LIPO = @LIPO@ 295LN_S = @LN_S@ 296LTLIBOBJS = @LTLIBOBJS@ 297LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 298MAKEINFO = @MAKEINFO@ 299MANIFEST_TOOL = @MANIFEST_TOOL@ 300MAN_SUBSTS = @MAN_SUBSTS@ 301MISC_MAN_DIR = @MISC_MAN_DIR@ 302MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 303MKDIR_P = @MKDIR_P@ 304NM = @NM@ 305NMEDIT = @NMEDIT@ 306OBJDUMP = @OBJDUMP@ 307OBJEXT = @OBJEXT@ 308OTOOL = @OTOOL@ 309OTOOL64 = @OTOOL64@ 310PACKAGE = @PACKAGE@ 311PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 312PACKAGE_NAME = @PACKAGE_NAME@ 313PACKAGE_STRING = @PACKAGE_STRING@ 314PACKAGE_TARNAME = @PACKAGE_TARNAME@ 315PACKAGE_URL = @PACKAGE_URL@ 316PACKAGE_VERSION = @PACKAGE_VERSION@ 317PATH_SEPARATOR = @PATH_SEPARATOR@ 318PKG_CONFIG = @PKG_CONFIG@ 319PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 320PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 321RANLIB = @RANLIB@ 322SED = @SED@ 323SET_MAKE = @SET_MAKE@ 324SHELL = @SHELL@ 325STRICT_CFLAGS = @STRICT_CFLAGS@ 326STRIP = @STRIP@ 327VERSION = @VERSION@ 328XEXT_CFLAGS = @XEXT_CFLAGS@ 329XEXT_LIBS = @XEXT_LIBS@ 330XORG_CFLAGS = @XORG_CFLAGS@ 331XORG_LIBS = @XORG_LIBS@ 332XORG_MAN_PAGE = @XORG_MAN_PAGE@ 333abs_builddir = @abs_builddir@ 334abs_srcdir = @abs_srcdir@ 335abs_top_builddir = @abs_top_builddir@ 336abs_top_srcdir = @abs_top_srcdir@ 337ac_ct_AR = @ac_ct_AR@ 338ac_ct_CC = @ac_ct_CC@ 339ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 340am__include = @am__include@ 341am__leading_dot = @am__leading_dot@ 342am__quote = @am__quote@ 343am__tar = @am__tar@ 344am__untar = @am__untar@ 345bindir = @bindir@ 346build = @build@ 347build_alias = @build_alias@ 348build_cpu = @build_cpu@ 349build_os = @build_os@ 350build_vendor = @build_vendor@ 351builddir = @builddir@ 352configdir = @configdir@ 353datadir = @datadir@ 354datarootdir = @datarootdir@ 355docdir = @docdir@ 356dvidir = @dvidir@ 357exec_prefix = @exec_prefix@ 358host = @host@ 359host_alias = @host_alias@ 360host_cpu = @host_cpu@ 361host_os = @host_os@ 362host_vendor = @host_vendor@ 363htmldir = @htmldir@ 364includedir = @includedir@ 365infodir = @infodir@ 366install_sh = @install_sh@ 367libdir = @libdir@ 368libexecdir = @libexecdir@ 369localedir = @localedir@ 370localstatedir = @localstatedir@ 371mandir = @mandir@ 372mkdir_p = @mkdir_p@ 373moduledir = @moduledir@ 374oldincludedir = @oldincludedir@ 375pdfdir = @pdfdir@ 376prefix = @prefix@ 377program_transform_name = @program_transform_name@ 378psdir = @psdir@ 379runstatedir = @runstatedir@ 380sbindir = @sbindir@ 381sharedstatedir = @sharedstatedir@ 382srcdir = @srcdir@ 383sysconfdir = @sysconfdir@ 384target_alias = @target_alias@ 385top_build_prefix = @top_build_prefix@ 386top_builddir = @top_builddir@ 387top_srcdir = @top_srcdir@ 388SUBDIRS = src man conf 389MAINTAINERCLEANFILES = ChangeLog INSTALL 390ACLOCAL_AMFLAGS = -I m4 391EXTRA_DIST = ChangeLog INSTALL README.md 392all: config.h 393 $(MAKE) $(AM_MAKEFLAGS) all-recursive 394 395.SUFFIXES: 396am--refresh: Makefile 397 @: 398$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 399 @for dep in $?; do \ 400 case '$(am__configure_deps)' in \ 401 *$$dep*) \ 402 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 403 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 404 && exit 0; \ 405 exit 1;; \ 406 esac; \ 407 done; \ 408 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 409 $(am__cd) $(top_srcdir) && \ 410 $(AUTOMAKE) --foreign Makefile 411Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 412 @case '$?' in \ 413 *config.status*) \ 414 echo ' $(SHELL) ./config.status'; \ 415 $(SHELL) ./config.status;; \ 416 *) \ 417 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ 418 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ 419 esac; 420 421$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 422 $(SHELL) ./config.status --recheck 423 424$(top_srcdir)/configure: $(am__configure_deps) 425 $(am__cd) $(srcdir) && $(AUTOCONF) 426$(ACLOCAL_M4): $(am__aclocal_m4_deps) 427 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 428$(am__aclocal_m4_deps): 429 430config.h: stamp-h1 431 @test -f $@ || rm -f stamp-h1 432 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 433 434stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 435 @rm -f stamp-h1 436 cd $(top_builddir) && $(SHELL) ./config.status config.h 437$(srcdir)/config.h.in: $(am__configure_deps) 438 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 439 rm -f stamp-h1 440 touch $@ 441 442distclean-hdr: 443 -rm -f config.h stamp-h1 444 445mostlyclean-libtool: 446 -rm -f *.lo 447 448clean-libtool: 449 -rm -rf .libs _libs 450 451distclean-libtool: 452 -rm -f libtool config.lt 453 454# This directory's subdirectories are mostly independent; you can cd 455# into them and run 'make' without going through this Makefile. 456# To change the values of 'make' variables: instead of editing Makefiles, 457# (1) if the variable is set in 'config.status', edit 'config.status' 458# (which will cause the Makefiles to be regenerated when you run 'make'); 459# (2) otherwise, pass the desired values on the 'make' command line. 460$(am__recursive_targets): 461 @fail=; \ 462 if $(am__make_keepgoing); then \ 463 failcom='fail=yes'; \ 464 else \ 465 failcom='exit 1'; \ 466 fi; \ 467 dot_seen=no; \ 468 target=`echo $@ | sed s/-recursive//`; \ 469 case "$@" in \ 470 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 471 *) list='$(SUBDIRS)' ;; \ 472 esac; \ 473 for subdir in $$list; do \ 474 echo "Making $$target in $$subdir"; \ 475 if test "$$subdir" = "."; then \ 476 dot_seen=yes; \ 477 local_target="$$target-am"; \ 478 else \ 479 local_target="$$target"; \ 480 fi; \ 481 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 482 || eval $$failcom; \ 483 done; \ 484 if test "$$dot_seen" = "no"; then \ 485 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 486 fi; test -z "$$fail" 487 488ID: $(am__tagged_files) 489 $(am__define_uniq_tagged_files); mkid -fID $$unique 490tags: tags-recursive 491TAGS: tags 492 493tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 494 set x; \ 495 here=`pwd`; \ 496 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 497 include_option=--etags-include; \ 498 empty_fix=.; \ 499 else \ 500 include_option=--include; \ 501 empty_fix=; \ 502 fi; \ 503 list='$(SUBDIRS)'; for subdir in $$list; do \ 504 if test "$$subdir" = .; then :; else \ 505 test ! -f $$subdir/TAGS || \ 506 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 507 fi; \ 508 done; \ 509 $(am__define_uniq_tagged_files); \ 510 shift; \ 511 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 512 test -n "$$unique" || unique=$$empty_fix; \ 513 if test $$# -gt 0; then \ 514 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 515 "$$@" $$unique; \ 516 else \ 517 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 518 $$unique; \ 519 fi; \ 520 fi 521ctags: ctags-recursive 522 523CTAGS: ctags 524ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 525 $(am__define_uniq_tagged_files); \ 526 test -z "$(CTAGS_ARGS)$$unique" \ 527 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 528 $$unique 529 530GTAGS: 531 here=`$(am__cd) $(top_builddir) && pwd` \ 532 && $(am__cd) $(top_srcdir) \ 533 && gtags -i $(GTAGS_ARGS) "$$here" 534cscope: cscope.files 535 test ! -s cscope.files \ 536 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 537clean-cscope: 538 -rm -f cscope.files 539cscope.files: clean-cscope cscopelist 540cscopelist: cscopelist-recursive 541 542cscopelist-am: $(am__tagged_files) 543 list='$(am__tagged_files)'; \ 544 case "$(srcdir)" in \ 545 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 546 *) sdir=$(subdir)/$(srcdir) ;; \ 547 esac; \ 548 for i in $$list; do \ 549 if test -f "$$i"; then \ 550 echo "$(subdir)/$$i"; \ 551 else \ 552 echo "$$sdir/$$i"; \ 553 fi; \ 554 done >> $(top_builddir)/cscope.files 555 556distclean-tags: 557 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 558 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 559distdir: $(BUILT_SOURCES) 560 $(MAKE) $(AM_MAKEFLAGS) distdir-am 561 562distdir-am: $(DISTFILES) 563 $(am__remove_distdir) 564 test -d "$(distdir)" || mkdir "$(distdir)" 565 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 566 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 567 list='$(DISTFILES)'; \ 568 dist_files=`for file in $$list; do echo $$file; done | \ 569 sed -e "s|^$$srcdirstrip/||;t" \ 570 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 571 case $$dist_files in \ 572 */*) $(MKDIR_P) `echo "$$dist_files" | \ 573 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 574 sort -u` ;; \ 575 esac; \ 576 for file in $$dist_files; do \ 577 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 578 if test -d $$d/$$file; then \ 579 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 580 if test -d "$(distdir)/$$file"; then \ 581 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 582 fi; \ 583 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 584 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 585 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 586 fi; \ 587 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 588 else \ 589 test -f "$(distdir)/$$file" \ 590 || cp -p $$d/$$file "$(distdir)/$$file" \ 591 || exit 1; \ 592 fi; \ 593 done 594 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 595 if test "$$subdir" = .; then :; else \ 596 $(am__make_dryrun) \ 597 || test -d "$(distdir)/$$subdir" \ 598 || $(MKDIR_P) "$(distdir)/$$subdir" \ 599 || exit 1; \ 600 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 601 $(am__relativize); \ 602 new_distdir=$$reldir; \ 603 dir1=$$subdir; dir2="$(top_distdir)"; \ 604 $(am__relativize); \ 605 new_top_distdir=$$reldir; \ 606 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 607 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 608 ($(am__cd) $$subdir && \ 609 $(MAKE) $(AM_MAKEFLAGS) \ 610 top_distdir="$$new_top_distdir" \ 611 distdir="$$new_distdir" \ 612 am__remove_distdir=: \ 613 am__skip_length_check=: \ 614 am__skip_mode_fix=: \ 615 distdir) \ 616 || exit 1; \ 617 fi; \ 618 done 619 -test -n "$(am__skip_mode_fix)" \ 620 || find "$(distdir)" -type d ! -perm -755 \ 621 -exec chmod u+rwx,go+rx {} \; -o \ 622 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 623 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 624 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 625 || chmod -R a+r "$(distdir)" 626dist-gzip: distdir 627 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 628 $(am__post_remove_distdir) 629 630dist-bzip2: distdir 631 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 632 $(am__post_remove_distdir) 633 634dist-lzip: distdir 635 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 636 $(am__post_remove_distdir) 637dist-xz: distdir 638 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 639 $(am__post_remove_distdir) 640 641dist-zstd: distdir 642 tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst 643 $(am__post_remove_distdir) 644 645dist-tarZ: distdir 646 @echo WARNING: "Support for distribution archives compressed with" \ 647 "legacy program 'compress' is deprecated." >&2 648 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 649 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 650 $(am__post_remove_distdir) 651 652dist-shar: distdir 653 @echo WARNING: "Support for shar distribution archives is" \ 654 "deprecated." >&2 655 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 656 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 657 $(am__post_remove_distdir) 658 659dist-zip: distdir 660 -rm -f $(distdir).zip 661 zip -rq $(distdir).zip $(distdir) 662 $(am__post_remove_distdir) 663 664dist dist-all: 665 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 666 $(am__post_remove_distdir) 667 668# This target untars the dist file and tries a VPATH configuration. Then 669# it guarantees that the distribution is self-contained by making another 670# tarfile. 671distcheck: dist 672 case '$(DIST_ARCHIVES)' in \ 673 *.tar.gz*) \ 674 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 675 *.tar.bz2*) \ 676 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 677 *.tar.lz*) \ 678 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 679 *.tar.xz*) \ 680 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 681 *.tar.Z*) \ 682 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 683 *.shar.gz*) \ 684 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 685 *.zip*) \ 686 unzip $(distdir).zip ;;\ 687 *.tar.zst*) \ 688 zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ 689 esac 690 chmod -R a-w $(distdir) 691 chmod u+w $(distdir) 692 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 693 chmod a-w $(distdir) 694 test -d $(distdir)/_build || exit 0; \ 695 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 696 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 697 && am__cwd=`pwd` \ 698 && $(am__cd) $(distdir)/_build/sub \ 699 && ../../configure \ 700 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 701 $(DISTCHECK_CONFIGURE_FLAGS) \ 702 --srcdir=../.. --prefix="$$dc_install_base" \ 703 && $(MAKE) $(AM_MAKEFLAGS) \ 704 && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ 705 && $(MAKE) $(AM_MAKEFLAGS) check \ 706 && $(MAKE) $(AM_MAKEFLAGS) install \ 707 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 708 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 709 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 710 distuninstallcheck \ 711 && chmod -R a-w "$$dc_install_base" \ 712 && ({ \ 713 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 714 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 715 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 716 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 717 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 718 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 719 && rm -rf "$$dc_destdir" \ 720 && $(MAKE) $(AM_MAKEFLAGS) dist \ 721 && rm -rf $(DIST_ARCHIVES) \ 722 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 723 && cd "$$am__cwd" \ 724 || exit 1 725 $(am__post_remove_distdir) 726 @(echo "$(distdir) archives ready for distribution: "; \ 727 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 728 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 729distuninstallcheck: 730 @test -n '$(distuninstallcheck_dir)' || { \ 731 echo 'ERROR: trying to run $@ with an empty' \ 732 '$$(distuninstallcheck_dir)' >&2; \ 733 exit 1; \ 734 }; \ 735 $(am__cd) '$(distuninstallcheck_dir)' || { \ 736 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 737 exit 1; \ 738 }; \ 739 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 740 || { echo "ERROR: files left after uninstall:" ; \ 741 if test -n "$(DESTDIR)"; then \ 742 echo " (check DESTDIR support)"; \ 743 fi ; \ 744 $(distuninstallcheck_listfiles) ; \ 745 exit 1; } >&2 746distcleancheck: distclean 747 @if test '$(srcdir)' = . ; then \ 748 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 749 exit 1 ; \ 750 fi 751 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 752 || { echo "ERROR: files left in build directory after distclean:" ; \ 753 $(distcleancheck_listfiles) ; \ 754 exit 1; } >&2 755check-am: all-am 756check: check-recursive 757all-am: Makefile config.h 758installdirs: installdirs-recursive 759installdirs-am: 760install: install-recursive 761install-exec: install-exec-recursive 762install-data: install-data-recursive 763uninstall: uninstall-recursive 764 765install-am: all-am 766 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 767 768installcheck: installcheck-recursive 769install-strip: 770 if test -z '$(STRIP)'; then \ 771 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 772 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 773 install; \ 774 else \ 775 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 776 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 777 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 778 fi 779mostlyclean-generic: 780 781clean-generic: 782 783distclean-generic: 784 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 785 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 786 787maintainer-clean-generic: 788 @echo "This command is intended for maintainers to use" 789 @echo "it deletes files that may require special tools to rebuild." 790 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 791clean: clean-recursive 792 793clean-am: clean-generic clean-libtool mostlyclean-am 794 795distclean: distclean-recursive 796 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 797 -rm -f Makefile 798distclean-am: clean-am distclean-generic distclean-hdr \ 799 distclean-libtool distclean-tags 800 801dvi: dvi-recursive 802 803dvi-am: 804 805html: html-recursive 806 807html-am: 808 809info: info-recursive 810 811info-am: 812 813install-data-am: 814 815install-dvi: install-dvi-recursive 816 817install-dvi-am: 818 819install-exec-am: 820 821install-html: install-html-recursive 822 823install-html-am: 824 825install-info: install-info-recursive 826 827install-info-am: 828 829install-man: 830 831install-pdf: install-pdf-recursive 832 833install-pdf-am: 834 835install-ps: install-ps-recursive 836 837install-ps-am: 838 839installcheck-am: 840 841maintainer-clean: maintainer-clean-recursive 842 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 843 -rm -rf $(top_srcdir)/autom4te.cache 844 -rm -f Makefile 845maintainer-clean-am: distclean-am maintainer-clean-generic 846 847mostlyclean: mostlyclean-recursive 848 849mostlyclean-am: mostlyclean-generic mostlyclean-libtool 850 851pdf: pdf-recursive 852 853pdf-am: 854 855ps: ps-recursive 856 857ps-am: 858 859uninstall-am: 860 861.MAKE: $(am__recursive_targets) all install-am install-strip 862 863.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 864 am--refresh check check-am clean clean-cscope clean-generic \ 865 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 866 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \ 867 dist-xz dist-zip dist-zstd distcheck distclean \ 868 distclean-generic distclean-hdr distclean-libtool \ 869 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 870 dvi-am html html-am info info-am install install-am \ 871 install-data install-data-am install-dvi install-dvi-am \ 872 install-exec install-exec-am install-html install-html-am \ 873 install-info install-info-am install-man install-pdf \ 874 install-pdf-am install-ps install-ps-am install-strip \ 875 installcheck installcheck-am installdirs installdirs-am \ 876 maintainer-clean maintainer-clean-generic mostlyclean \ 877 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 878 tags tags-am uninstall uninstall-am 879 880.PRECIOUS: Makefile 881 882 883.PHONY: ChangeLog INSTALL 884 885INSTALL: 886 $(INSTALL_CMD) 887 888ChangeLog: 889 $(CHANGELOG_CMD) 890 891# Tell versions [3.59,3.63) of GNU make to not export all variables. 892# Otherwise a system limit (for SysV at least) may be exceeded. 893.NOEXPORT: 894