1# Makefile.in generated by automake 1.14.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2013 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2005 Adam Jackson. 18# 19# Permission is hereby granted, free of charge, to any person obtaining a 20# copy of this software and associated documentation files (the "Software"), 21# to deal in the Software without restriction, including without limitation 22# on the rights to use, copy, modify, merge, publish, distribute, sub 23# license, and/or sell copies of the Software, and to permit persons to whom 24# the Software is furnished to do so, subject to the following conditions: 25# 26# The above copyright notice and this permission notice (including the next 27# paragraph) shall be included in all copies or substantial portions of the 28# Software. 29# 30# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 31# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 32# FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 33# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER 34# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 35# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 36VPATH = @srcdir@ 37am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' 38am__make_running_with_option = \ 39 case $${target_option-} in \ 40 ?) ;; \ 41 *) echo "am__make_running_with_option: internal error: invalid" \ 42 "target option '$${target_option-}' specified" >&2; \ 43 exit 1;; \ 44 esac; \ 45 has_opt=no; \ 46 sane_makeflags=$$MAKEFLAGS; \ 47 if $(am__is_gnu_make); then \ 48 sane_makeflags=$$MFLAGS; \ 49 else \ 50 case $$MAKEFLAGS in \ 51 *\\[\ \ ]*) \ 52 bs=\\; \ 53 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 54 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 55 esac; \ 56 fi; \ 57 skip_next=no; \ 58 strip_trailopt () \ 59 { \ 60 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 61 }; \ 62 for flg in $$sane_makeflags; do \ 63 test $$skip_next = yes && { skip_next=no; continue; }; \ 64 case $$flg in \ 65 *=*|--*) continue;; \ 66 -*I) strip_trailopt 'I'; skip_next=yes;; \ 67 -*I?*) strip_trailopt 'I';; \ 68 -*O) strip_trailopt 'O'; skip_next=yes;; \ 69 -*O?*) strip_trailopt 'O';; \ 70 -*l) strip_trailopt 'l'; skip_next=yes;; \ 71 -*l?*) strip_trailopt 'l';; \ 72 -[dEDm]) skip_next=yes;; \ 73 -[JT]) skip_next=yes;; \ 74 esac; \ 75 case $$flg in \ 76 *$$target_option*) has_opt=yes; break;; \ 77 esac; \ 78 done; \ 79 test $$has_opt = yes 80am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 81am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 82pkgdatadir = $(datadir)/@PACKAGE@ 83pkgincludedir = $(includedir)/@PACKAGE@ 84pkglibdir = $(libdir)/@PACKAGE@ 85pkglibexecdir = $(libexecdir)/@PACKAGE@ 86am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 87install_sh_DATA = $(install_sh) -c -m 644 88install_sh_PROGRAM = $(install_sh) -c 89install_sh_SCRIPT = $(install_sh) -c 90INSTALL_HEADER = $(INSTALL_DATA) 91transform = $(program_transform_name) 92NORMAL_INSTALL = : 93PRE_INSTALL = : 94POST_INSTALL = : 95NORMAL_UNINSTALL = : 96PRE_UNINSTALL = : 97POST_UNINSTALL = : 98build_triplet = @build@ 99host_triplet = @host@ 100@HAVE_X11_TRUE@am__append_1 = test 101subdir = . 102DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ 103 $(top_srcdir)/configure $(am__configure_deps) \ 104 $(srcdir)/config.h.in AUTHORS COPYING ChangeLog INSTALL NEWS \ 105 README compile config.guess config.sub depcomp install-sh \ 106 missing ltmain.sh 107ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 108am__aclocal_m4_deps = $(top_srcdir)/m4/ac_define_dir.m4 \ 109 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ 110 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ 111 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac 112am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 113 $(ACLOCAL_M4) 114am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 115 configure.lineno config.status.lineno 116mkinstalldirs = $(install_sh) -d 117CONFIG_HEADER = config.h 118CONFIG_CLEAN_FILES = 119CONFIG_CLEAN_VPATH_FILES = 120AM_V_P = $(am__v_P_@AM_V@) 121am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 122am__v_P_0 = false 123am__v_P_1 = : 124AM_V_GEN = $(am__v_GEN_@AM_V@) 125am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 126am__v_GEN_0 = @echo " GEN " $@; 127am__v_GEN_1 = 128AM_V_at = $(am__v_at_@AM_V@) 129am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 130am__v_at_0 = @ 131am__v_at_1 = 132SOURCES = 133DIST_SOURCES = 134RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 135 ctags-recursive dvi-recursive html-recursive info-recursive \ 136 install-data-recursive install-dvi-recursive \ 137 install-exec-recursive install-html-recursive \ 138 install-info-recursive install-pdf-recursive \ 139 install-ps-recursive install-recursive installcheck-recursive \ 140 installdirs-recursive pdf-recursive ps-recursive \ 141 tags-recursive uninstall-recursive 142am__can_run_installinfo = \ 143 case $$AM_UPDATE_INFO_DIR in \ 144 n|no|NO) false;; \ 145 *) (install-info --version) >/dev/null 2>&1;; \ 146 esac 147RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 148 distclean-recursive maintainer-clean-recursive 149am__recursive_targets = \ 150 $(RECURSIVE_TARGETS) \ 151 $(RECURSIVE_CLEAN_TARGETS) \ 152 $(am__extra_recursive_targets) 153AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 154 cscope distdir dist dist-all distcheck 155am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 156 $(LISP)config.h.in 157# Read a list of newline-separated strings from the standard input, 158# and print each of them once, without duplicates. Input order is 159# *not* preserved. 160am__uniquify_input = $(AWK) '\ 161 BEGIN { nonempty = 0; } \ 162 { items[$$0] = 1; nonempty = 1; } \ 163 END { if (nonempty) { for (i in items) print i; }; } \ 164' 165# Make sure the list of sources is unique. This is necessary because, 166# e.g., the same source file might be shared among _SOURCES variables 167# for different programs/libraries. 168am__define_uniq_tagged_files = \ 169 list='$(am__tagged_files)'; \ 170 unique=`for i in $$list; do \ 171 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 172 done | $(am__uniquify_input)` 173ETAGS = etags 174CTAGS = ctags 175CSCOPE = cscope 176DIST_SUBDIRS = man libobj xvmc src tools test 177DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 178distdir = $(PACKAGE)-$(VERSION) 179top_distdir = $(distdir) 180am__remove_distdir = \ 181 if test -d "$(distdir)"; then \ 182 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 183 && rm -rf "$(distdir)" \ 184 || { sleep 5 && rm -rf "$(distdir)"; }; \ 185 else :; fi 186am__post_remove_distdir = $(am__remove_distdir) 187am__relativize = \ 188 dir0=`pwd`; \ 189 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 190 sed_rest='s,^[^/]*/*,,'; \ 191 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 192 sed_butlast='s,/*[^/]*$$,,'; \ 193 while test -n "$$dir1"; do \ 194 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 195 if test "$$first" != "."; then \ 196 if test "$$first" = ".."; then \ 197 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 198 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 199 else \ 200 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 201 if test "$$first2" = "$$first"; then \ 202 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 203 else \ 204 dir2="../$$dir2"; \ 205 fi; \ 206 dir0="$$dir0"/"$$first"; \ 207 fi; \ 208 fi; \ 209 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 210 done; \ 211 reldir="$$dir2" 212DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 213GZIP_ENV = --best 214DIST_TARGETS = dist-bzip2 dist-gzip 215distuninstallcheck_listfiles = find . -type f -print 216am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 217 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 218distcleancheck_listfiles = find . -type f -print 219ACLOCAL = @ACLOCAL@ 220ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 221ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 222AMTAR = @AMTAR@ 223AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 224APP_MAN_DIR = @APP_MAN_DIR@ 225APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 226AR = @AR@ 227AUTOCONF = @AUTOCONF@ 228AUTOHEADER = @AUTOHEADER@ 229AUTOMAKE = @AUTOMAKE@ 230AWK = @AWK@ 231BASE_CFLAGS = @BASE_CFLAGS@ 232CC = @CC@ 233CCDEPMODE = @CCDEPMODE@ 234CFLAGS = @CFLAGS@ 235CHANGELOG_CMD = @CHANGELOG_CMD@ 236CLOCK_GETTIME_LIBS = @CLOCK_GETTIME_LIBS@ 237CPP = @CPP@ 238CPPFLAGS = @CPPFLAGS@ 239CWARNFLAGS = @CWARNFLAGS@ 240CYGPATH_W = @CYGPATH_W@ 241DEFS = @DEFS@ 242DEPDIR = @DEPDIR@ 243DLLTOOL = @DLLTOOL@ 244DRI1_CFLAGS = @DRI1_CFLAGS@ 245DRI1_LIBS = @DRI1_LIBS@ 246DRI2_CFLAGS = @DRI2_CFLAGS@ 247DRI2_LIBS = @DRI2_LIBS@ 248DRI3_CFLAGS = @DRI3_CFLAGS@ 249DRI3_LIBS = @DRI3_LIBS@ 250DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 251DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 252DRIVER_NAME = @DRIVER_NAME@ 253DRI_DRIVER_PATH = @DRI_DRIVER_PATH@ 254DRMINTEL_CFLAGS = @DRMINTEL_CFLAGS@ 255DRMINTEL_LIBS = @DRMINTEL_LIBS@ 256DRM_CFLAGS = @DRM_CFLAGS@ 257DRM_LIBS = @DRM_LIBS@ 258DSYMUTIL = @DSYMUTIL@ 259DUMPBIN = @DUMPBIN@ 260ECHO_C = @ECHO_C@ 261ECHO_N = @ECHO_N@ 262ECHO_T = @ECHO_T@ 263EGREP = @EGREP@ 264EXEEXT = @EXEEXT@ 265FGREP = @FGREP@ 266FILE_MAN_DIR = @FILE_MAN_DIR@ 267FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 268GEN4ASM_CFLAGS = @GEN4ASM_CFLAGS@ 269GEN4ASM_LIBS = @GEN4ASM_LIBS@ 270GREP = @GREP@ 271INSTALL = @INSTALL@ 272INSTALL_CMD = @INSTALL_CMD@ 273INSTALL_DATA = @INSTALL_DATA@ 274INSTALL_PROGRAM = @INSTALL_PROGRAM@ 275INSTALL_SCRIPT = @INSTALL_SCRIPT@ 276INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 277INTEL_GEN4ASM = @INTEL_GEN4ASM@ 278IVO_CFLAGS = @IVO_CFLAGS@ 279IVO_EXTRA_CFLAGS = @IVO_EXTRA_CFLAGS@ 280IVO_EXTRA_LIBS = @IVO_EXTRA_LIBS@ 281IVO_LIBS = @IVO_LIBS@ 282LD = @LD@ 283LDFLAGS = @LDFLAGS@ 284LIBEXEC_PATH = @LIBEXEC_PATH@ 285LIBOBJS = @LIBOBJS@ 286LIBS = @LIBS@ 287LIBTOOL = @LIBTOOL@ 288LIB_MAN_DIR = @LIB_MAN_DIR@ 289LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 290LIPO = @LIPO@ 291LN_S = @LN_S@ 292LTLIBOBJS = @LTLIBOBJS@ 293MAKEINFO = @MAKEINFO@ 294MANIFEST_TOOL = @MANIFEST_TOOL@ 295MAN_SUBSTS = @MAN_SUBSTS@ 296MISC_MAN_DIR = @MISC_MAN_DIR@ 297MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 298MKDIR_P = @MKDIR_P@ 299NM = @NM@ 300NMEDIT = @NMEDIT@ 301NOWARNFLAGS = @NOWARNFLAGS@ 302OBJDUMP = @OBJDUMP@ 303OBJEXT = @OBJEXT@ 304OTOOL = @OTOOL@ 305OTOOL64 = @OTOOL64@ 306PACKAGE = @PACKAGE@ 307PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 308PACKAGE_NAME = @PACKAGE_NAME@ 309PACKAGE_STRING = @PACKAGE_STRING@ 310PACKAGE_TARNAME = @PACKAGE_TARNAME@ 311PACKAGE_URL = @PACKAGE_URL@ 312PACKAGE_VERSION = @PACKAGE_VERSION@ 313PATH_SEPARATOR = @PATH_SEPARATOR@ 314PCIACCESS_CFLAGS = @PCIACCESS_CFLAGS@ 315PCIACCESS_LIBS = @PCIACCESS_LIBS@ 316PKG_CONFIG = @PKG_CONFIG@ 317PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 318PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 319PREFIX_PATH = @PREFIX_PATH@ 320PRESENT_CFLAGS = @PRESENT_CFLAGS@ 321PRESENT_LIBS = @PRESENT_LIBS@ 322RANLIB = @RANLIB@ 323SED = @SED@ 324SET_MAKE = @SET_MAKE@ 325SHELL = @SHELL@ 326STRICT_CFLAGS = @STRICT_CFLAGS@ 327STRIP = @STRIP@ 328UDEV_CFLAGS = @UDEV_CFLAGS@ 329UDEV_LIBS = @UDEV_LIBS@ 330VALGRIND_CFLAGS = @VALGRIND_CFLAGS@ 331VALGRIND_LIBS = @VALGRIND_LIBS@ 332VERSION = @VERSION@ 333X11_CFLAGS = @X11_CFLAGS@ 334X11_DRI3_CFLAGS = @X11_DRI3_CFLAGS@ 335X11_DRI3_LIBS = @X11_DRI3_LIBS@ 336X11_LIBS = @X11_LIBS@ 337XORG_CFLAGS = @XORG_CFLAGS@ 338XORG_LIBS = @XORG_LIBS@ 339XORG_MAN_PAGE = @XORG_MAN_PAGE@ 340XVMCLIB_CFLAGS = @XVMCLIB_CFLAGS@ 341XVMCLIB_LIBS = @XVMCLIB_LIBS@ 342abs_builddir = @abs_builddir@ 343abs_srcdir = @abs_srcdir@ 344abs_top_builddir = @abs_top_builddir@ 345abs_top_srcdir = @abs_top_srcdir@ 346ac_ct_AR = @ac_ct_AR@ 347ac_ct_CC = @ac_ct_CC@ 348ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 349am__include = @am__include@ 350am__leading_dot = @am__leading_dot@ 351am__quote = @am__quote@ 352am__tar = @am__tar@ 353am__untar = @am__untar@ 354bindir = @bindir@ 355build = @build@ 356build_alias = @build_alias@ 357build_cpu = @build_cpu@ 358build_os = @build_os@ 359build_vendor = @build_vendor@ 360builddir = @builddir@ 361datadir = @datadir@ 362datarootdir = @datarootdir@ 363docdir = @docdir@ 364dvidir = @dvidir@ 365exec_prefix = @exec_prefix@ 366host = @host@ 367host_alias = @host_alias@ 368host_cpu = @host_cpu@ 369host_os = @host_os@ 370host_vendor = @host_vendor@ 371htmldir = @htmldir@ 372includedir = @includedir@ 373infodir = @infodir@ 374install_sh = @install_sh@ 375libdir = @libdir@ 376libexecdir = @libexecdir@ 377localedir = @localedir@ 378localstatedir = @localstatedir@ 379mandir = @mandir@ 380mkdir_p = @mkdir_p@ 381moduledir = @moduledir@ 382oldincludedir = @oldincludedir@ 383pdfdir = @pdfdir@ 384prefix = @prefix@ 385program_transform_name = @program_transform_name@ 386psdir = @psdir@ 387sbindir = @sbindir@ 388sharedstatedir = @sharedstatedir@ 389srcdir = @srcdir@ 390sysconfdir = @sysconfdir@ 391target_alias = @target_alias@ 392top_build_prefix = @top_build_prefix@ 393top_builddir = @top_builddir@ 394top_srcdir = @top_srcdir@ 395ACLOCAL_AMFLAGS = ${ACLOCAL_FLAGS} -I m4 396SUBDIRS = man libobj xvmc src tools $(am__append_1) 397MAINTAINERCLEANFILES = ChangeLog INSTALL 398all: config.h 399 $(MAKE) $(AM_MAKEFLAGS) all-recursive 400 401.SUFFIXES: 402am--refresh: Makefile 403 @: 404$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 405 @for dep in $?; do \ 406 case '$(am__configure_deps)' in \ 407 *$$dep*) \ 408 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 409 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 410 && exit 0; \ 411 exit 1;; \ 412 esac; \ 413 done; \ 414 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 415 $(am__cd) $(top_srcdir) && \ 416 $(AUTOMAKE) --foreign Makefile 417.PRECIOUS: Makefile 418Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 419 @case '$?' in \ 420 *config.status*) \ 421 echo ' $(SHELL) ./config.status'; \ 422 $(SHELL) ./config.status;; \ 423 *) \ 424 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 425 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 426 esac; 427 428$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 429 $(SHELL) ./config.status --recheck 430 431$(top_srcdir)/configure: $(am__configure_deps) 432 $(am__cd) $(srcdir) && $(AUTOCONF) 433$(ACLOCAL_M4): $(am__aclocal_m4_deps) 434 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 435$(am__aclocal_m4_deps): 436 437config.h: stamp-h1 438 @test -f $@ || rm -f stamp-h1 439 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 440 441stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 442 @rm -f stamp-h1 443 cd $(top_builddir) && $(SHELL) ./config.status config.h 444$(srcdir)/config.h.in: $(am__configure_deps) 445 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 446 rm -f stamp-h1 447 touch $@ 448 449distclean-hdr: 450 -rm -f config.h stamp-h1 451 452mostlyclean-libtool: 453 -rm -f *.lo 454 455clean-libtool: 456 -rm -rf .libs _libs 457 458distclean-libtool: 459 -rm -f libtool config.lt 460 461# This directory's subdirectories are mostly independent; you can cd 462# into them and run 'make' without going through this Makefile. 463# To change the values of 'make' variables: instead of editing Makefiles, 464# (1) if the variable is set in 'config.status', edit 'config.status' 465# (which will cause the Makefiles to be regenerated when you run 'make'); 466# (2) otherwise, pass the desired values on the 'make' command line. 467$(am__recursive_targets): 468 @fail=; \ 469 if $(am__make_keepgoing); then \ 470 failcom='fail=yes'; \ 471 else \ 472 failcom='exit 1'; \ 473 fi; \ 474 dot_seen=no; \ 475 target=`echo $@ | sed s/-recursive//`; \ 476 case "$@" in \ 477 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 478 *) list='$(SUBDIRS)' ;; \ 479 esac; \ 480 for subdir in $$list; do \ 481 echo "Making $$target in $$subdir"; \ 482 if test "$$subdir" = "."; then \ 483 dot_seen=yes; \ 484 local_target="$$target-am"; \ 485 else \ 486 local_target="$$target"; \ 487 fi; \ 488 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 489 || eval $$failcom; \ 490 done; \ 491 if test "$$dot_seen" = "no"; then \ 492 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 493 fi; test -z "$$fail" 494 495ID: $(am__tagged_files) 496 $(am__define_uniq_tagged_files); mkid -fID $$unique 497tags: tags-recursive 498TAGS: tags 499 500tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 501 set x; \ 502 here=`pwd`; \ 503 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 504 include_option=--etags-include; \ 505 empty_fix=.; \ 506 else \ 507 include_option=--include; \ 508 empty_fix=; \ 509 fi; \ 510 list='$(SUBDIRS)'; for subdir in $$list; do \ 511 if test "$$subdir" = .; then :; else \ 512 test ! -f $$subdir/TAGS || \ 513 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 514 fi; \ 515 done; \ 516 $(am__define_uniq_tagged_files); \ 517 shift; \ 518 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 519 test -n "$$unique" || unique=$$empty_fix; \ 520 if test $$# -gt 0; then \ 521 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 522 "$$@" $$unique; \ 523 else \ 524 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 525 $$unique; \ 526 fi; \ 527 fi 528ctags: ctags-recursive 529 530CTAGS: ctags 531ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 532 $(am__define_uniq_tagged_files); \ 533 test -z "$(CTAGS_ARGS)$$unique" \ 534 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 535 $$unique 536 537GTAGS: 538 here=`$(am__cd) $(top_builddir) && pwd` \ 539 && $(am__cd) $(top_srcdir) \ 540 && gtags -i $(GTAGS_ARGS) "$$here" 541cscope: cscope.files 542 test ! -s cscope.files \ 543 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 544clean-cscope: 545 -rm -f cscope.files 546cscope.files: clean-cscope cscopelist 547cscopelist: cscopelist-recursive 548 549cscopelist-am: $(am__tagged_files) 550 list='$(am__tagged_files)'; \ 551 case "$(srcdir)" in \ 552 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 553 *) sdir=$(subdir)/$(srcdir) ;; \ 554 esac; \ 555 for i in $$list; do \ 556 if test -f "$$i"; then \ 557 echo "$(subdir)/$$i"; \ 558 else \ 559 echo "$$sdir/$$i"; \ 560 fi; \ 561 done >> $(top_builddir)/cscope.files 562 563distclean-tags: 564 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 565 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 566 567distdir: $(DISTFILES) 568 $(am__remove_distdir) 569 test -d "$(distdir)" || mkdir "$(distdir)" 570 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 571 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 572 list='$(DISTFILES)'; \ 573 dist_files=`for file in $$list; do echo $$file; done | \ 574 sed -e "s|^$$srcdirstrip/||;t" \ 575 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 576 case $$dist_files in \ 577 */*) $(MKDIR_P) `echo "$$dist_files" | \ 578 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 579 sort -u` ;; \ 580 esac; \ 581 for file in $$dist_files; do \ 582 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 583 if test -d $$d/$$file; then \ 584 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 585 if test -d "$(distdir)/$$file"; then \ 586 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 587 fi; \ 588 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 589 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 590 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 591 fi; \ 592 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 593 else \ 594 test -f "$(distdir)/$$file" \ 595 || cp -p $$d/$$file "$(distdir)/$$file" \ 596 || exit 1; \ 597 fi; \ 598 done 599 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 600 if test "$$subdir" = .; then :; else \ 601 $(am__make_dryrun) \ 602 || test -d "$(distdir)/$$subdir" \ 603 || $(MKDIR_P) "$(distdir)/$$subdir" \ 604 || exit 1; \ 605 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 606 $(am__relativize); \ 607 new_distdir=$$reldir; \ 608 dir1=$$subdir; dir2="$(top_distdir)"; \ 609 $(am__relativize); \ 610 new_top_distdir=$$reldir; \ 611 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 612 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 613 ($(am__cd) $$subdir && \ 614 $(MAKE) $(AM_MAKEFLAGS) \ 615 top_distdir="$$new_top_distdir" \ 616 distdir="$$new_distdir" \ 617 am__remove_distdir=: \ 618 am__skip_length_check=: \ 619 am__skip_mode_fix=: \ 620 distdir) \ 621 || exit 1; \ 622 fi; \ 623 done 624 $(MAKE) $(AM_MAKEFLAGS) \ 625 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 626 dist-hook 627 -test -n "$(am__skip_mode_fix)" \ 628 || find "$(distdir)" -type d ! -perm -755 \ 629 -exec chmod u+rwx,go+rx {} \; -o \ 630 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 631 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 632 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 633 || chmod -R a+r "$(distdir)" 634dist-gzip: distdir 635 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 636 $(am__post_remove_distdir) 637dist-bzip2: distdir 638 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 639 $(am__post_remove_distdir) 640 641dist-lzip: distdir 642 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 643 $(am__post_remove_distdir) 644 645dist-xz: distdir 646 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 647 $(am__post_remove_distdir) 648 649dist-tarZ: distdir 650 @echo WARNING: "Support for shar distribution archives is" \ 651 "deprecated." >&2 652 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 653 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 654 $(am__post_remove_distdir) 655 656dist-shar: distdir 657 @echo WARNING: "Support for distribution archives compressed with" \ 658 "legacy program 'compress' is deprecated." >&2 659 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 660 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 661 $(am__post_remove_distdir) 662 663dist-zip: distdir 664 -rm -f $(distdir).zip 665 zip -rq $(distdir).zip $(distdir) 666 $(am__post_remove_distdir) 667 668dist dist-all: 669 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 670 $(am__post_remove_distdir) 671 672# This target untars the dist file and tries a VPATH configuration. Then 673# it guarantees that the distribution is self-contained by making another 674# tarfile. 675distcheck: dist 676 case '$(DIST_ARCHIVES)' in \ 677 *.tar.gz*) \ 678 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 679 *.tar.bz2*) \ 680 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 681 *.tar.lz*) \ 682 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 683 *.tar.xz*) \ 684 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 685 *.tar.Z*) \ 686 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 687 *.shar.gz*) \ 688 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 689 *.zip*) \ 690 unzip $(distdir).zip ;;\ 691 esac 692 chmod -R a-w $(distdir) 693 chmod u+w $(distdir) 694 mkdir $(distdir)/_build $(distdir)/_inst 695 chmod a-w $(distdir) 696 test -d $(distdir)/_build || exit 0; \ 697 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 698 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 699 && am__cwd=`pwd` \ 700 && $(am__cd) $(distdir)/_build \ 701 && ../configure \ 702 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 703 $(DISTCHECK_CONFIGURE_FLAGS) \ 704 --srcdir=.. --prefix="$$dc_install_base" \ 705 && $(MAKE) $(AM_MAKEFLAGS) \ 706 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 707 && $(MAKE) $(AM_MAKEFLAGS) check \ 708 && $(MAKE) $(AM_MAKEFLAGS) install \ 709 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 710 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 711 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 712 distuninstallcheck \ 713 && chmod -R a-w "$$dc_install_base" \ 714 && ({ \ 715 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 716 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 717 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 718 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 719 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 720 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 721 && rm -rf "$$dc_destdir" \ 722 && $(MAKE) $(AM_MAKEFLAGS) dist \ 723 && rm -rf $(DIST_ARCHIVES) \ 724 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 725 && cd "$$am__cwd" \ 726 || exit 1 727 $(am__post_remove_distdir) 728 @(echo "$(distdir) archives ready for distribution: "; \ 729 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 730 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 731distuninstallcheck: 732 @test -n '$(distuninstallcheck_dir)' || { \ 733 echo 'ERROR: trying to run $@ with an empty' \ 734 '$$(distuninstallcheck_dir)' >&2; \ 735 exit 1; \ 736 }; \ 737 $(am__cd) '$(distuninstallcheck_dir)' || { \ 738 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 739 exit 1; \ 740 }; \ 741 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 742 || { echo "ERROR: files left after uninstall:" ; \ 743 if test -n "$(DESTDIR)"; then \ 744 echo " (check DESTDIR support)"; \ 745 fi ; \ 746 $(distuninstallcheck_listfiles) ; \ 747 exit 1; } >&2 748distcleancheck: distclean 749 @if test '$(srcdir)' = . ; then \ 750 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 751 exit 1 ; \ 752 fi 753 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 754 || { echo "ERROR: files left in build directory after distclean:" ; \ 755 $(distcleancheck_listfiles) ; \ 756 exit 1; } >&2 757check-am: all-am 758check: check-recursive 759all-am: Makefile config.h 760installdirs: installdirs-recursive 761installdirs-am: 762install: install-recursive 763install-exec: install-exec-recursive 764install-data: install-data-recursive 765uninstall: uninstall-recursive 766 767install-am: all-am 768 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 769 770installcheck: installcheck-recursive 771install-strip: 772 if test -z '$(STRIP)'; then \ 773 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 774 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 775 install; \ 776 else \ 777 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 778 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 779 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 780 fi 781mostlyclean-generic: 782 783clean-generic: 784 785distclean-generic: 786 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 787 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 788 789maintainer-clean-generic: 790 @echo "This command is intended for maintainers to use" 791 @echo "it deletes files that may require special tools to rebuild." 792 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 793clean: clean-recursive 794 795clean-am: clean-generic clean-libtool mostlyclean-am 796 797distclean: distclean-recursive 798 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 799 -rm -f Makefile 800distclean-am: clean-am distclean-generic distclean-hdr \ 801 distclean-libtool distclean-tags 802 803dvi: dvi-recursive 804 805dvi-am: 806 807html: html-recursive 808 809html-am: 810 811info: info-recursive 812 813info-am: 814 815install-data-am: 816 817install-dvi: install-dvi-recursive 818 819install-dvi-am: 820 821install-exec-am: 822 823install-html: install-html-recursive 824 825install-html-am: 826 827install-info: install-info-recursive 828 829install-info-am: 830 831install-man: 832 833install-pdf: install-pdf-recursive 834 835install-pdf-am: 836 837install-ps: install-ps-recursive 838 839install-ps-am: 840 841installcheck-am: 842 843maintainer-clean: maintainer-clean-recursive 844 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 845 -rm -rf $(top_srcdir)/autom4te.cache 846 -rm -f Makefile 847maintainer-clean-am: distclean-am maintainer-clean-generic 848 849mostlyclean: mostlyclean-recursive 850 851mostlyclean-am: mostlyclean-generic mostlyclean-libtool 852 853pdf: pdf-recursive 854 855pdf-am: 856 857ps: ps-recursive 858 859ps-am: 860 861uninstall-am: 862 863.MAKE: $(am__recursive_targets) all install-am install-strip 864 865.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 866 am--refresh check check-am clean clean-cscope clean-generic \ 867 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 868 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 869 dist-tarZ dist-xz dist-zip distcheck distclean \ 870 distclean-generic distclean-hdr distclean-libtool \ 871 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 872 dvi-am html html-am info info-am install install-am \ 873 install-data install-data-am install-dvi install-dvi-am \ 874 install-exec install-exec-am install-html install-html-am \ 875 install-info install-info-am install-man install-pdf \ 876 install-pdf-am install-ps install-ps-am install-strip \ 877 installcheck installcheck-am installdirs installdirs-am \ 878 maintainer-clean maintainer-clean-generic mostlyclean \ 879 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 880 tags tags-am uninstall uninstall-am 881 882 883.PHONY: ChangeLog INSTALL 884 885INSTALL: 886 $(INSTALL_CMD) 887 888ChangeLog: 889 $(CHANGELOG_CMD) 890 891dist-hook: ChangeLog INSTALL 892 893# Tell versions [3.59,3.63) of GNU make to not export all variables. 894# Otherwise a system limit (for SysV at least) may be exceeded. 895.NOEXPORT: 896