1# Makefile.in generated by automake 1.16.5 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2021 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# 
18#  Copyright 2005  Red Hat, Inc.
19# 
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29# 
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94pkgdatadir = $(datadir)/@PACKAGE@
95pkgincludedir = $(includedir)/@PACKAGE@
96pkglibdir = $(libdir)/@PACKAGE@
97pkglibexecdir = $(libexecdir)/@PACKAGE@
98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
99install_sh_DATA = $(install_sh) -c -m 644
100install_sh_PROGRAM = $(install_sh) -c
101install_sh_SCRIPT = $(install_sh) -c
102INSTALL_HEADER = $(INSTALL_DATA)
103transform = $(program_transform_name)
104NORMAL_INSTALL = :
105PRE_INSTALL = :
106POST_INSTALL = :
107NORMAL_UNINSTALL = :
108PRE_UNINSTALL = :
109POST_UNINSTALL = :
110build_triplet = @build@
111host_triplet = @host@
112bin_PROGRAMS = xfsinfo$(EXEEXT)
113subdir = .
114ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
115am__aclocal_m4_deps = $(top_srcdir)/configure.ac
116am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
117	$(ACLOCAL_M4)
118DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
119	$(am__configure_deps) $(am__DIST_COMMON)
120am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
121 configure.lineno config.status.lineno
122mkinstalldirs = $(install_sh) -d
123CONFIG_HEADER = config.h
124CONFIG_CLEAN_FILES =
125CONFIG_CLEAN_VPATH_FILES =
126am__installdirs = "$(DESTDIR)$(bindir)"
127PROGRAMS = $(bin_PROGRAMS)
128am_xfsinfo_OBJECTS = xfsinfo.$(OBJEXT)
129xfsinfo_OBJECTS = $(am_xfsinfo_OBJECTS)
130am__DEPENDENCIES_1 =
131xfsinfo_DEPENDENCIES = $(am__DEPENDENCIES_1)
132AM_V_P = $(am__v_P_@AM_V@)
133am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
134am__v_P_0 = false
135am__v_P_1 = :
136AM_V_GEN = $(am__v_GEN_@AM_V@)
137am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
138am__v_GEN_0 = @echo "  GEN     " $@;
139am__v_GEN_1 = 
140AM_V_at = $(am__v_at_@AM_V@)
141am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
142am__v_at_0 = @
143am__v_at_1 = 
144DEFAULT_INCLUDES = -I.@am__isrc@
145depcomp = $(SHELL) $(top_srcdir)/depcomp
146am__maybe_remake_depfiles = depfiles
147am__depfiles_remade = ./$(DEPDIR)/xfsinfo.Po
148am__mv = mv -f
149COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
150	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
151AM_V_CC = $(am__v_CC_@AM_V@)
152am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
153am__v_CC_0 = @echo "  CC      " $@;
154am__v_CC_1 = 
155CCLD = $(CC)
156LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
157AM_V_CCLD = $(am__v_CCLD_@AM_V@)
158am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
159am__v_CCLD_0 = @echo "  CCLD    " $@;
160am__v_CCLD_1 = 
161SOURCES = $(xfsinfo_SOURCES)
162DIST_SOURCES = $(xfsinfo_SOURCES)
163RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
164	ctags-recursive dvi-recursive html-recursive info-recursive \
165	install-data-recursive install-dvi-recursive \
166	install-exec-recursive install-html-recursive \
167	install-info-recursive install-pdf-recursive \
168	install-ps-recursive install-recursive installcheck-recursive \
169	installdirs-recursive pdf-recursive ps-recursive \
170	tags-recursive uninstall-recursive
171am__can_run_installinfo = \
172  case $$AM_UPDATE_INFO_DIR in \
173    n|no|NO) false;; \
174    *) (install-info --version) >/dev/null 2>&1;; \
175  esac
176RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
177  distclean-recursive maintainer-clean-recursive
178am__recursive_targets = \
179  $(RECURSIVE_TARGETS) \
180  $(RECURSIVE_CLEAN_TARGETS) \
181  $(am__extra_recursive_targets)
182AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
183	cscope distdir distdir-am dist dist-all distcheck
184am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
185	config.h.in
186# Read a list of newline-separated strings from the standard input,
187# and print each of them once, without duplicates.  Input order is
188# *not* preserved.
189am__uniquify_input = $(AWK) '\
190  BEGIN { nonempty = 0; } \
191  { items[$$0] = 1; nonempty = 1; } \
192  END { if (nonempty) { for (i in items) print i; }; } \
193'
194# Make sure the list of sources is unique.  This is necessary because,
195# e.g., the same source file might be shared among _SOURCES variables
196# for different programs/libraries.
197am__define_uniq_tagged_files = \
198  list='$(am__tagged_files)'; \
199  unique=`for i in $$list; do \
200    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
201  done | $(am__uniquify_input)`
202DIST_SUBDIRS = $(SUBDIRS)
203am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
204	ChangeLog INSTALL README.md compile config.guess config.sub \
205	depcomp install-sh missing
206DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
207distdir = $(PACKAGE)-$(VERSION)
208top_distdir = $(distdir)
209am__remove_distdir = \
210  if test -d "$(distdir)"; then \
211    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
212      && rm -rf "$(distdir)" \
213      || { sleep 5 && rm -rf "$(distdir)"; }; \
214  else :; fi
215am__post_remove_distdir = $(am__remove_distdir)
216am__relativize = \
217  dir0=`pwd`; \
218  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
219  sed_rest='s,^[^/]*/*,,'; \
220  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
221  sed_butlast='s,/*[^/]*$$,,'; \
222  while test -n "$$dir1"; do \
223    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
224    if test "$$first" != "."; then \
225      if test "$$first" = ".."; then \
226        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
227        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
228      else \
229        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
230        if test "$$first2" = "$$first"; then \
231          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
232        else \
233          dir2="../$$dir2"; \
234        fi; \
235        dir0="$$dir0"/"$$first"; \
236      fi; \
237    fi; \
238    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
239  done; \
240  reldir="$$dir2"
241DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
242GZIP_ENV = --best
243DIST_TARGETS = dist-xz dist-gzip
244# Exists only to be overridden by the user if desired.
245AM_DISTCHECK_DVI_TARGET = dvi
246distuninstallcheck_listfiles = find . -type f -print
247am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
248  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
249distcleancheck_listfiles = find . -type f -print
250ACLOCAL = @ACLOCAL@
251ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
252ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
253AMTAR = @AMTAR@
254AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
255APP_MAN_DIR = @APP_MAN_DIR@
256APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
257AUTOCONF = @AUTOCONF@
258AUTOHEADER = @AUTOHEADER@
259AUTOMAKE = @AUTOMAKE@
260AWK = @AWK@
261BASE_CFLAGS = @BASE_CFLAGS@
262CC = @CC@
263CCDEPMODE = @CCDEPMODE@
264CFLAGS = @CFLAGS@
265CHANGELOG_CMD = @CHANGELOG_CMD@
266CPPFLAGS = @CPPFLAGS@
267CSCOPE = @CSCOPE@
268CTAGS = @CTAGS@
269CWARNFLAGS = @CWARNFLAGS@
270CYGPATH_W = @CYGPATH_W@
271DEFS = @DEFS@
272DEPDIR = @DEPDIR@
273DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
274DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
275ECHO_C = @ECHO_C@
276ECHO_N = @ECHO_N@
277ECHO_T = @ECHO_T@
278ETAGS = @ETAGS@
279EXEEXT = @EXEEXT@
280FILE_MAN_DIR = @FILE_MAN_DIR@
281FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
282INSTALL = @INSTALL@
283INSTALL_CMD = @INSTALL_CMD@
284INSTALL_DATA = @INSTALL_DATA@
285INSTALL_PROGRAM = @INSTALL_PROGRAM@
286INSTALL_SCRIPT = @INSTALL_SCRIPT@
287INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
288LDFLAGS = @LDFLAGS@
289LIBOBJS = @LIBOBJS@
290LIBS = @LIBS@
291LIB_MAN_DIR = @LIB_MAN_DIR@
292LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
293LTLIBOBJS = @LTLIBOBJS@
294MAKEINFO = @MAKEINFO@
295MAN_SUBSTS = @MAN_SUBSTS@
296MISC_MAN_DIR = @MISC_MAN_DIR@
297MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
298MKDIR_P = @MKDIR_P@
299OBJEXT = @OBJEXT@
300PACKAGE = @PACKAGE@
301PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
302PACKAGE_NAME = @PACKAGE_NAME@
303PACKAGE_STRING = @PACKAGE_STRING@
304PACKAGE_TARNAME = @PACKAGE_TARNAME@
305PACKAGE_URL = @PACKAGE_URL@
306PACKAGE_VERSION = @PACKAGE_VERSION@
307PATH_SEPARATOR = @PATH_SEPARATOR@
308PKG_CONFIG = @PKG_CONFIG@
309PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
310PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
311SED = @SED@
312SET_MAKE = @SET_MAKE@
313SHELL = @SHELL@
314STRICT_CFLAGS = @STRICT_CFLAGS@
315STRIP = @STRIP@
316VERSION = @VERSION@
317XFSINFO_CFLAGS = @XFSINFO_CFLAGS@
318XFSINFO_LIBS = @XFSINFO_LIBS@
319XORG_MAN_PAGE = @XORG_MAN_PAGE@
320abs_builddir = @abs_builddir@
321abs_srcdir = @abs_srcdir@
322abs_top_builddir = @abs_top_builddir@
323abs_top_srcdir = @abs_top_srcdir@
324ac_ct_CC = @ac_ct_CC@
325am__include = @am__include@
326am__leading_dot = @am__leading_dot@
327am__quote = @am__quote@
328am__tar = @am__tar@
329am__untar = @am__untar@
330bindir = @bindir@
331build = @build@
332build_alias = @build_alias@
333build_cpu = @build_cpu@
334build_os = @build_os@
335build_vendor = @build_vendor@
336builddir = @builddir@
337datadir = @datadir@
338datarootdir = @datarootdir@
339docdir = @docdir@
340dvidir = @dvidir@
341exec_prefix = @exec_prefix@
342host = @host@
343host_alias = @host_alias@
344host_cpu = @host_cpu@
345host_os = @host_os@
346host_vendor = @host_vendor@
347htmldir = @htmldir@
348includedir = @includedir@
349infodir = @infodir@
350install_sh = @install_sh@
351libdir = @libdir@
352libexecdir = @libexecdir@
353localedir = @localedir@
354localstatedir = @localstatedir@
355mandir = @mandir@
356mkdir_p = @mkdir_p@
357oldincludedir = @oldincludedir@
358pdfdir = @pdfdir@
359prefix = @prefix@
360program_transform_name = @program_transform_name@
361psdir = @psdir@
362runstatedir = @runstatedir@
363sbindir = @sbindir@
364sharedstatedir = @sharedstatedir@
365srcdir = @srcdir@
366sysconfdir = @sysconfdir@
367target_alias = @target_alias@
368top_build_prefix = @top_build_prefix@
369top_builddir = @top_builddir@
370top_srcdir = @top_srcdir@
371SUBDIRS = man
372AM_CFLAGS = $(XFSINFO_CFLAGS) $(CWARNFLAGS)
373xfsinfo_LDADD = $(XFSINFO_LIBS)
374xfsinfo_SOURCES = \
375        xfsinfo.c
376
377MAINTAINERCLEANFILES = ChangeLog INSTALL
378EXTRA_DIST = README.md
379all: config.h
380	$(MAKE) $(AM_MAKEFLAGS) all-recursive
381
382.SUFFIXES:
383.SUFFIXES: .c .o .obj
384am--refresh: Makefile
385	@:
386$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
387	@for dep in $?; do \
388	  case '$(am__configure_deps)' in \
389	    *$$dep*) \
390	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
391	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
392		&& exit 0; \
393	      exit 1;; \
394	  esac; \
395	done; \
396	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
397	$(am__cd) $(top_srcdir) && \
398	  $(AUTOMAKE) --foreign Makefile
399Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
400	@case '$?' in \
401	  *config.status*) \
402	    echo ' $(SHELL) ./config.status'; \
403	    $(SHELL) ./config.status;; \
404	  *) \
405	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
406	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
407	esac;
408
409$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
410	$(SHELL) ./config.status --recheck
411
412$(top_srcdir)/configure:  $(am__configure_deps)
413	$(am__cd) $(srcdir) && $(AUTOCONF)
414$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
415	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
416$(am__aclocal_m4_deps):
417
418config.h: stamp-h1
419	@test -f $@ || rm -f stamp-h1
420	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
421
422stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
423	@rm -f stamp-h1
424	cd $(top_builddir) && $(SHELL) ./config.status config.h
425$(srcdir)/config.h.in:  $(am__configure_deps) 
426	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
427	rm -f stamp-h1
428	touch $@
429
430distclean-hdr:
431	-rm -f config.h stamp-h1
432install-binPROGRAMS: $(bin_PROGRAMS)
433	@$(NORMAL_INSTALL)
434	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
435	if test -n "$$list"; then \
436	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
437	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
438	fi; \
439	for p in $$list; do echo "$$p $$p"; done | \
440	sed 's/$(EXEEXT)$$//' | \
441	while read p p1; do if test -f $$p \
442	  ; then echo "$$p"; echo "$$p"; else :; fi; \
443	done | \
444	sed -e 'p;s,.*/,,;n;h' \
445	    -e 's|.*|.|' \
446	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
447	sed 'N;N;N;s,\n, ,g' | \
448	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
449	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
450	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
451	    else { print "f", $$3 "/" $$4, $$1; } } \
452	  END { for (d in files) print "f", d, files[d] }' | \
453	while read type dir files; do \
454	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
455	    test -z "$$files" || { \
456	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
457	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
458	    } \
459	; done
460
461uninstall-binPROGRAMS:
462	@$(NORMAL_UNINSTALL)
463	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
464	files=`for p in $$list; do echo "$$p"; done | \
465	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
466	      -e 's/$$/$(EXEEXT)/' \
467	`; \
468	test -n "$$list" || exit 0; \
469	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
470	cd "$(DESTDIR)$(bindir)" && rm -f $$files
471
472clean-binPROGRAMS:
473	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
474
475xfsinfo$(EXEEXT): $(xfsinfo_OBJECTS) $(xfsinfo_DEPENDENCIES) $(EXTRA_xfsinfo_DEPENDENCIES) 
476	@rm -f xfsinfo$(EXEEXT)
477	$(AM_V_CCLD)$(LINK) $(xfsinfo_OBJECTS) $(xfsinfo_LDADD) $(LIBS)
478
479mostlyclean-compile:
480	-rm -f *.$(OBJEXT)
481
482distclean-compile:
483	-rm -f *.tab.c
484
485@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfsinfo.Po@am__quote@ # am--include-marker
486
487$(am__depfiles_remade):
488	@$(MKDIR_P) $(@D)
489	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
490
491am--depfiles: $(am__depfiles_remade)
492
493.c.o:
494@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
495@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
496@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
497@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
498@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
499
500.c.obj:
501@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
502@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
503@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
504@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
505@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
506
507# This directory's subdirectories are mostly independent; you can cd
508# into them and run 'make' without going through this Makefile.
509# To change the values of 'make' variables: instead of editing Makefiles,
510# (1) if the variable is set in 'config.status', edit 'config.status'
511#     (which will cause the Makefiles to be regenerated when you run 'make');
512# (2) otherwise, pass the desired values on the 'make' command line.
513$(am__recursive_targets):
514	@fail=; \
515	if $(am__make_keepgoing); then \
516	  failcom='fail=yes'; \
517	else \
518	  failcom='exit 1'; \
519	fi; \
520	dot_seen=no; \
521	target=`echo $@ | sed s/-recursive//`; \
522	case "$@" in \
523	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
524	  *) list='$(SUBDIRS)' ;; \
525	esac; \
526	for subdir in $$list; do \
527	  echo "Making $$target in $$subdir"; \
528	  if test "$$subdir" = "."; then \
529	    dot_seen=yes; \
530	    local_target="$$target-am"; \
531	  else \
532	    local_target="$$target"; \
533	  fi; \
534	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
535	  || eval $$failcom; \
536	done; \
537	if test "$$dot_seen" = "no"; then \
538	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
539	fi; test -z "$$fail"
540
541ID: $(am__tagged_files)
542	$(am__define_uniq_tagged_files); mkid -fID $$unique
543tags: tags-recursive
544TAGS: tags
545
546tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
547	set x; \
548	here=`pwd`; \
549	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
550	  include_option=--etags-include; \
551	  empty_fix=.; \
552	else \
553	  include_option=--include; \
554	  empty_fix=; \
555	fi; \
556	list='$(SUBDIRS)'; for subdir in $$list; do \
557	  if test "$$subdir" = .; then :; else \
558	    test ! -f $$subdir/TAGS || \
559	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
560	  fi; \
561	done; \
562	$(am__define_uniq_tagged_files); \
563	shift; \
564	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
565	  test -n "$$unique" || unique=$$empty_fix; \
566	  if test $$# -gt 0; then \
567	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
568	      "$$@" $$unique; \
569	  else \
570	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
571	      $$unique; \
572	  fi; \
573	fi
574ctags: ctags-recursive
575
576CTAGS: ctags
577ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
578	$(am__define_uniq_tagged_files); \
579	test -z "$(CTAGS_ARGS)$$unique" \
580	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
581	     $$unique
582
583GTAGS:
584	here=`$(am__cd) $(top_builddir) && pwd` \
585	  && $(am__cd) $(top_srcdir) \
586	  && gtags -i $(GTAGS_ARGS) "$$here"
587cscope: cscope.files
588	test ! -s cscope.files \
589	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
590clean-cscope:
591	-rm -f cscope.files
592cscope.files: clean-cscope cscopelist
593cscopelist: cscopelist-recursive
594
595cscopelist-am: $(am__tagged_files)
596	list='$(am__tagged_files)'; \
597	case "$(srcdir)" in \
598	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
599	  *) sdir=$(subdir)/$(srcdir) ;; \
600	esac; \
601	for i in $$list; do \
602	  if test -f "$$i"; then \
603	    echo "$(subdir)/$$i"; \
604	  else \
605	    echo "$$sdir/$$i"; \
606	  fi; \
607	done >> $(top_builddir)/cscope.files
608
609distclean-tags:
610	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
611	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
612distdir: $(BUILT_SOURCES)
613	$(MAKE) $(AM_MAKEFLAGS) distdir-am
614
615distdir-am: $(DISTFILES)
616	$(am__remove_distdir)
617	test -d "$(distdir)" || mkdir "$(distdir)"
618	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
619	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
620	list='$(DISTFILES)'; \
621	  dist_files=`for file in $$list; do echo $$file; done | \
622	  sed -e "s|^$$srcdirstrip/||;t" \
623	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
624	case $$dist_files in \
625	  */*) $(MKDIR_P) `echo "$$dist_files" | \
626			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
627			   sort -u` ;; \
628	esac; \
629	for file in $$dist_files; do \
630	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
631	  if test -d $$d/$$file; then \
632	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
633	    if test -d "$(distdir)/$$file"; then \
634	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
635	    fi; \
636	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
637	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
638	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
639	    fi; \
640	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
641	  else \
642	    test -f "$(distdir)/$$file" \
643	    || cp -p $$d/$$file "$(distdir)/$$file" \
644	    || exit 1; \
645	  fi; \
646	done
647	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
648	  if test "$$subdir" = .; then :; else \
649	    $(am__make_dryrun) \
650	      || test -d "$(distdir)/$$subdir" \
651	      || $(MKDIR_P) "$(distdir)/$$subdir" \
652	      || exit 1; \
653	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
654	    $(am__relativize); \
655	    new_distdir=$$reldir; \
656	    dir1=$$subdir; dir2="$(top_distdir)"; \
657	    $(am__relativize); \
658	    new_top_distdir=$$reldir; \
659	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
660	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
661	    ($(am__cd) $$subdir && \
662	      $(MAKE) $(AM_MAKEFLAGS) \
663	        top_distdir="$$new_top_distdir" \
664	        distdir="$$new_distdir" \
665		am__remove_distdir=: \
666		am__skip_length_check=: \
667		am__skip_mode_fix=: \
668	        distdir) \
669	      || exit 1; \
670	  fi; \
671	done
672	$(MAKE) $(AM_MAKEFLAGS) \
673	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
674	  dist-hook
675	-test -n "$(am__skip_mode_fix)" \
676	|| find "$(distdir)" -type d ! -perm -755 \
677		-exec chmod u+rwx,go+rx {} \; -o \
678	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
679	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
680	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
681	|| chmod -R a+r "$(distdir)"
682dist-gzip: distdir
683	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
684	$(am__post_remove_distdir)
685
686dist-bzip2: distdir
687	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
688	$(am__post_remove_distdir)
689
690dist-lzip: distdir
691	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
692	$(am__post_remove_distdir)
693dist-xz: distdir
694	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
695	$(am__post_remove_distdir)
696
697dist-zstd: distdir
698	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
699	$(am__post_remove_distdir)
700
701dist-tarZ: distdir
702	@echo WARNING: "Support for distribution archives compressed with" \
703		       "legacy program 'compress' is deprecated." >&2
704	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
705	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
706	$(am__post_remove_distdir)
707
708dist-shar: distdir
709	@echo WARNING: "Support for shar distribution archives is" \
710	               "deprecated." >&2
711	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
712	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
713	$(am__post_remove_distdir)
714
715dist-zip: distdir
716	-rm -f $(distdir).zip
717	zip -rq $(distdir).zip $(distdir)
718	$(am__post_remove_distdir)
719
720dist dist-all:
721	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
722	$(am__post_remove_distdir)
723
724# This target untars the dist file and tries a VPATH configuration.  Then
725# it guarantees that the distribution is self-contained by making another
726# tarfile.
727distcheck: dist
728	case '$(DIST_ARCHIVES)' in \
729	*.tar.gz*) \
730	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
731	*.tar.bz2*) \
732	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
733	*.tar.lz*) \
734	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
735	*.tar.xz*) \
736	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
737	*.tar.Z*) \
738	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
739	*.shar.gz*) \
740	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
741	*.zip*) \
742	  unzip $(distdir).zip ;;\
743	*.tar.zst*) \
744	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
745	esac
746	chmod -R a-w $(distdir)
747	chmod u+w $(distdir)
748	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
749	chmod a-w $(distdir)
750	test -d $(distdir)/_build || exit 0; \
751	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
752	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
753	  && am__cwd=`pwd` \
754	  && $(am__cd) $(distdir)/_build/sub \
755	  && ../../configure \
756	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
757	    $(DISTCHECK_CONFIGURE_FLAGS) \
758	    --srcdir=../.. --prefix="$$dc_install_base" \
759	  && $(MAKE) $(AM_MAKEFLAGS) \
760	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
761	  && $(MAKE) $(AM_MAKEFLAGS) check \
762	  && $(MAKE) $(AM_MAKEFLAGS) install \
763	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
764	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
765	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
766	        distuninstallcheck \
767	  && chmod -R a-w "$$dc_install_base" \
768	  && ({ \
769	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
770	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
771	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
772	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
773	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
774	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
775	  && rm -rf "$$dc_destdir" \
776	  && $(MAKE) $(AM_MAKEFLAGS) dist \
777	  && rm -rf $(DIST_ARCHIVES) \
778	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
779	  && cd "$$am__cwd" \
780	  || exit 1
781	$(am__post_remove_distdir)
782	@(echo "$(distdir) archives ready for distribution: "; \
783	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
784	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
785distuninstallcheck:
786	@test -n '$(distuninstallcheck_dir)' || { \
787	  echo 'ERROR: trying to run $@ with an empty' \
788	       '$$(distuninstallcheck_dir)' >&2; \
789	  exit 1; \
790	}; \
791	$(am__cd) '$(distuninstallcheck_dir)' || { \
792	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
793	  exit 1; \
794	}; \
795	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
796	   || { echo "ERROR: files left after uninstall:" ; \
797	        if test -n "$(DESTDIR)"; then \
798	          echo "  (check DESTDIR support)"; \
799	        fi ; \
800	        $(distuninstallcheck_listfiles) ; \
801	        exit 1; } >&2
802distcleancheck: distclean
803	@if test '$(srcdir)' = . ; then \
804	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
805	  exit 1 ; \
806	fi
807	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
808	  || { echo "ERROR: files left in build directory after distclean:" ; \
809	       $(distcleancheck_listfiles) ; \
810	       exit 1; } >&2
811check-am: all-am
812check: check-recursive
813all-am: Makefile $(PROGRAMS) config.h
814installdirs: installdirs-recursive
815installdirs-am:
816	for dir in "$(DESTDIR)$(bindir)"; do \
817	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
818	done
819install: install-recursive
820install-exec: install-exec-recursive
821install-data: install-data-recursive
822uninstall: uninstall-recursive
823
824install-am: all-am
825	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
826
827installcheck: installcheck-recursive
828install-strip:
829	if test -z '$(STRIP)'; then \
830	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
831	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
832	      install; \
833	else \
834	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
835	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
836	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
837	fi
838mostlyclean-generic:
839
840clean-generic:
841
842distclean-generic:
843	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
844	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
845
846maintainer-clean-generic:
847	@echo "This command is intended for maintainers to use"
848	@echo "it deletes files that may require special tools to rebuild."
849	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
850clean: clean-recursive
851
852clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
853
854distclean: distclean-recursive
855	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
856		-rm -f ./$(DEPDIR)/xfsinfo.Po
857	-rm -f Makefile
858distclean-am: clean-am distclean-compile distclean-generic \
859	distclean-hdr distclean-tags
860
861dvi: dvi-recursive
862
863dvi-am:
864
865html: html-recursive
866
867html-am:
868
869info: info-recursive
870
871info-am:
872
873install-data-am:
874
875install-dvi: install-dvi-recursive
876
877install-dvi-am:
878
879install-exec-am: install-binPROGRAMS
880
881install-html: install-html-recursive
882
883install-html-am:
884
885install-info: install-info-recursive
886
887install-info-am:
888
889install-man:
890
891install-pdf: install-pdf-recursive
892
893install-pdf-am:
894
895install-ps: install-ps-recursive
896
897install-ps-am:
898
899installcheck-am:
900
901maintainer-clean: maintainer-clean-recursive
902	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
903	-rm -rf $(top_srcdir)/autom4te.cache
904		-rm -f ./$(DEPDIR)/xfsinfo.Po
905	-rm -f Makefile
906maintainer-clean-am: distclean-am maintainer-clean-generic
907
908mostlyclean: mostlyclean-recursive
909
910mostlyclean-am: mostlyclean-compile mostlyclean-generic
911
912pdf: pdf-recursive
913
914pdf-am:
915
916ps: ps-recursive
917
918ps-am:
919
920uninstall-am: uninstall-binPROGRAMS
921
922.MAKE: $(am__recursive_targets) all install-am install-strip
923
924.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
925	am--depfiles am--refresh check check-am clean \
926	clean-binPROGRAMS clean-cscope clean-generic cscope \
927	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
928	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
929	dist-zip dist-zstd distcheck distclean distclean-compile \
930	distclean-generic distclean-hdr distclean-tags distcleancheck \
931	distdir distuninstallcheck dvi dvi-am html html-am info \
932	info-am install install-am install-binPROGRAMS install-data \
933	install-data-am install-dvi install-dvi-am install-exec \
934	install-exec-am install-html install-html-am install-info \
935	install-info-am install-man install-pdf install-pdf-am \
936	install-ps install-ps-am install-strip installcheck \
937	installcheck-am installdirs installdirs-am maintainer-clean \
938	maintainer-clean-generic mostlyclean mostlyclean-compile \
939	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
940	uninstall-am uninstall-binPROGRAMS
941
942.PRECIOUS: Makefile
943
944
945.PHONY: ChangeLog INSTALL
946
947INSTALL:
948	$(INSTALL_CMD)
949
950ChangeLog:
951	$(CHANGELOG_CMD)
952
953dist-hook: ChangeLog INSTALL
954
955# Tell versions [3.59,3.63) of GNU make to not export all variables.
956# Otherwise a system limit (for SysV at least) may be exceeded.
957.NOEXPORT:
958