Makefile.in revision 94a251fd 
1# Makefile.in generated by automake 1.11.2 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
6# Foundation, Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18# 
19#  Copyright 2005  Red Hat, Inc.
20# 
21#  Permission to use, copy, modify, distribute, and sell this software and its
22#  documentation for any purpose is hereby granted without fee, provided that
23#  the above copyright notice appear in all copies and that both that
24#  copyright notice and this permission notice appear in supporting
25#  documentation, and that the name of Red Hat not be used in
26#  advertising or publicity pertaining to distribution of the software without
27#  specific, written prior permission.  Red Hat makes no
28#  representations about the suitability of this software for any purpose.  It
29#  is provided "as is" without express or implied warranty.
30# 
31#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
32#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
33#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
34#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
35#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
36#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
37#  PERFORMANCE OF THIS SOFTWARE.
38
39VPATH = @srcdir@
40pkgdatadir = $(datadir)/@PACKAGE@
41pkgincludedir = $(includedir)/@PACKAGE@
42pkglibdir = $(libdir)/@PACKAGE@
43pkglibexecdir = $(libexecdir)/@PACKAGE@
44am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
45install_sh_DATA = $(install_sh) -c -m 644
46install_sh_PROGRAM = $(install_sh) -c
47install_sh_SCRIPT = $(install_sh) -c
48INSTALL_HEADER = $(INSTALL_DATA)
49transform = $(program_transform_name)
50NORMAL_INSTALL = :
51PRE_INSTALL = :
52POST_INSTALL = :
53NORMAL_UNINSTALL = :
54PRE_UNINSTALL = :
55POST_UNINSTALL = :
56build_triplet = @build@
57host_triplet = @host@
58bin_PROGRAMS = xlsfonts$(EXEEXT)
59subdir = .
60DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
61	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
62	$(top_srcdir)/configure COPYING ChangeLog INSTALL config.guess \
63	config.sub depcomp install-sh missing
64ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
65am__aclocal_m4_deps = $(top_srcdir)/configure.ac
66am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
67	$(ACLOCAL_M4)
68am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
69 configure.lineno config.status.lineno
70mkinstalldirs = $(install_sh) -d
71CONFIG_HEADER = config.h
72CONFIG_CLEAN_FILES =
73CONFIG_CLEAN_VPATH_FILES =
74am__installdirs = "$(DESTDIR)$(bindir)"
75PROGRAMS = $(bin_PROGRAMS)
76am_xlsfonts_OBJECTS = dsimple.$(OBJEXT) xlsfonts.$(OBJEXT)
77xlsfonts_OBJECTS = $(am_xlsfonts_OBJECTS)
78am__DEPENDENCIES_1 =
79xlsfonts_DEPENDENCIES = $(am__DEPENDENCIES_1)
80DEFAULT_INCLUDES = -I.@am__isrc@
81depcomp = $(SHELL) $(top_srcdir)/depcomp
82am__depfiles_maybe = depfiles
83am__mv = mv -f
84COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
85	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
86AM_V_CC = $(am__v_CC_$(V))
87am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
88am__v_CC_0 = @echo "  CC    " $@;
89AM_V_at = $(am__v_at_$(V))
90am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
91am__v_at_0 = @
92CCLD = $(CC)
93LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
94AM_V_CCLD = $(am__v_CCLD_$(V))
95am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
96am__v_CCLD_0 = @echo "  CCLD  " $@;
97AM_V_GEN = $(am__v_GEN_$(V))
98am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
99am__v_GEN_0 = @echo "  GEN   " $@;
100SOURCES = $(xlsfonts_SOURCES)
101DIST_SOURCES = $(xlsfonts_SOURCES)
102RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
103	html-recursive info-recursive install-data-recursive \
104	install-dvi-recursive install-exec-recursive \
105	install-html-recursive install-info-recursive \
106	install-pdf-recursive install-ps-recursive install-recursive \
107	installcheck-recursive installdirs-recursive pdf-recursive \
108	ps-recursive uninstall-recursive
109RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
110  distclean-recursive maintainer-clean-recursive
111AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
112	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
113	distdir dist dist-all distcheck
114ETAGS = etags
115CTAGS = ctags
116DIST_SUBDIRS = $(SUBDIRS)
117DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
118distdir = $(PACKAGE)-$(VERSION)
119top_distdir = $(distdir)
120am__remove_distdir = \
121  { test ! -d "$(distdir)" \
122    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
123         && rm -fr "$(distdir)"; }; }
124am__relativize = \
125  dir0=`pwd`; \
126  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
127  sed_rest='s,^[^/]*/*,,'; \
128  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
129  sed_butlast='s,/*[^/]*$$,,'; \
130  while test -n "$$dir1"; do \
131    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
132    if test "$$first" != "."; then \
133      if test "$$first" = ".."; then \
134        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
135        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
136      else \
137        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
138        if test "$$first2" = "$$first"; then \
139          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
140        else \
141          dir2="../$$dir2"; \
142        fi; \
143        dir0="$$dir0"/"$$first"; \
144      fi; \
145    fi; \
146    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
147  done; \
148  reldir="$$dir2"
149DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
150GZIP_ENV = --best
151distuninstallcheck_listfiles = find . -type f -print
152am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
153  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
154distcleancheck_listfiles = find . -type f -print
155ACLOCAL = @ACLOCAL@
156ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
157ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
158AMTAR = @AMTAR@
159AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
160APP_MAN_DIR = @APP_MAN_DIR@
161APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
162AUTOCONF = @AUTOCONF@
163AUTOHEADER = @AUTOHEADER@
164AUTOMAKE = @AUTOMAKE@
165AWK = @AWK@
166BASE_CFLAGS = @BASE_CFLAGS@
167CC = @CC@
168CCDEPMODE = @CCDEPMODE@
169CFLAGS = @CFLAGS@
170CHANGELOG_CMD = @CHANGELOG_CMD@
171CPP = @CPP@
172CPPFLAGS = @CPPFLAGS@
173CWARNFLAGS = @CWARNFLAGS@
174CYGPATH_W = @CYGPATH_W@
175DEFS = @DEFS@
176DEPDIR = @DEPDIR@
177DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
178DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
179ECHO_C = @ECHO_C@
180ECHO_N = @ECHO_N@
181ECHO_T = @ECHO_T@
182EGREP = @EGREP@
183EXEEXT = @EXEEXT@
184FILE_MAN_DIR = @FILE_MAN_DIR@
185FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
186GREP = @GREP@
187INSTALL = @INSTALL@
188INSTALL_CMD = @INSTALL_CMD@
189INSTALL_DATA = @INSTALL_DATA@
190INSTALL_PROGRAM = @INSTALL_PROGRAM@
191INSTALL_SCRIPT = @INSTALL_SCRIPT@
192INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
193LDFLAGS = @LDFLAGS@
194LIBOBJS = @LIBOBJS@
195LIBS = @LIBS@
196LIB_MAN_DIR = @LIB_MAN_DIR@
197LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
198LTLIBOBJS = @LTLIBOBJS@
199MAINT = @MAINT@
200MAKEINFO = @MAKEINFO@
201MAN_SUBSTS = @MAN_SUBSTS@
202MISC_MAN_DIR = @MISC_MAN_DIR@
203MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
204MKDIR_P = @MKDIR_P@
205OBJEXT = @OBJEXT@
206PACKAGE = @PACKAGE@
207PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
208PACKAGE_NAME = @PACKAGE_NAME@
209PACKAGE_STRING = @PACKAGE_STRING@
210PACKAGE_TARNAME = @PACKAGE_TARNAME@
211PACKAGE_URL = @PACKAGE_URL@
212PACKAGE_VERSION = @PACKAGE_VERSION@
213PATH_SEPARATOR = @PATH_SEPARATOR@
214PKG_CONFIG = @PKG_CONFIG@
215SED = @SED@
216SET_MAKE = @SET_MAKE@
217SHELL = @SHELL@
218STRICT_CFLAGS = @STRICT_CFLAGS@
219STRIP = @STRIP@
220VERSION = @VERSION@
221XLSFONTS_CFLAGS = @XLSFONTS_CFLAGS@
222XLSFONTS_LIBS = @XLSFONTS_LIBS@
223XORG_MAN_PAGE = @XORG_MAN_PAGE@
224abs_builddir = @abs_builddir@
225abs_srcdir = @abs_srcdir@
226abs_top_builddir = @abs_top_builddir@
227abs_top_srcdir = @abs_top_srcdir@
228ac_ct_CC = @ac_ct_CC@
229am__include = @am__include@
230am__leading_dot = @am__leading_dot@
231am__quote = @am__quote@
232am__tar = @am__tar@
233am__untar = @am__untar@
234bindir = @bindir@
235build = @build@
236build_alias = @build_alias@
237build_cpu = @build_cpu@
238build_os = @build_os@
239build_vendor = @build_vendor@
240builddir = @builddir@
241datadir = @datadir@
242datarootdir = @datarootdir@
243docdir = @docdir@
244dvidir = @dvidir@
245exec_prefix = @exec_prefix@
246host = @host@
247host_alias = @host_alias@
248host_cpu = @host_cpu@
249host_os = @host_os@
250host_vendor = @host_vendor@
251htmldir = @htmldir@
252includedir = @includedir@
253infodir = @infodir@
254install_sh = @install_sh@
255libdir = @libdir@
256libexecdir = @libexecdir@
257localedir = @localedir@
258localstatedir = @localstatedir@
259mandir = @mandir@
260mkdir_p = @mkdir_p@
261oldincludedir = @oldincludedir@
262pdfdir = @pdfdir@
263prefix = @prefix@
264program_transform_name = @program_transform_name@
265psdir = @psdir@
266sbindir = @sbindir@
267sharedstatedir = @sharedstatedir@
268srcdir = @srcdir@
269sysconfdir = @sysconfdir@
270target_alias = @target_alias@
271top_build_prefix = @top_build_prefix@
272top_builddir = @top_builddir@
273top_srcdir = @top_srcdir@
274SUBDIRS = man
275AM_CFLAGS = $(XLSFONTS_CFLAGS) $(CWARNFLAGS)
276xlsfonts_LDADD = $(XLSFONTS_LIBS)
277xlsfonts_SOURCES = \
278        dsimple.c	\
279        dsimple.h	\
280        xlsfonts.c
281
282EXTRA_DIST = xlsfonts.xml
283MAINTAINERCLEANFILES = ChangeLog INSTALL
284all: config.h
285	$(MAKE) $(AM_MAKEFLAGS) all-recursive
286
287.SUFFIXES:
288.SUFFIXES: .c .o .obj
289am--refresh: Makefile
290	@:
291$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
292	@for dep in $?; do \
293	  case '$(am__configure_deps)' in \
294	    *$$dep*) \
295	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
296	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
297		&& exit 0; \
298	      exit 1;; \
299	  esac; \
300	done; \
301	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
302	$(am__cd) $(top_srcdir) && \
303	  $(AUTOMAKE) --foreign Makefile
304.PRECIOUS: Makefile
305Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
306	@case '$?' in \
307	  *config.status*) \
308	    echo ' $(SHELL) ./config.status'; \
309	    $(SHELL) ./config.status;; \
310	  *) \
311	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
312	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
313	esac;
314
315$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
316	$(SHELL) ./config.status --recheck
317
318$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
319	$(am__cd) $(srcdir) && $(AUTOCONF)
320$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
321	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
322$(am__aclocal_m4_deps):
323
324config.h: stamp-h1
325	@if test ! -f $@; then rm -f stamp-h1; else :; fi
326	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
327
328stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
329	@rm -f stamp-h1
330	cd $(top_builddir) && $(SHELL) ./config.status config.h
331$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
332	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
333	rm -f stamp-h1
334	touch $@
335
336distclean-hdr:
337	-rm -f config.h stamp-h1
338install-binPROGRAMS: $(bin_PROGRAMS)
339	@$(NORMAL_INSTALL)
340	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
341	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
342	for p in $$list; do echo "$$p $$p"; done | \
343	sed 's/$(EXEEXT)$$//' | \
344	while read p p1; do if test -f $$p; \
345	  then echo "$$p"; echo "$$p"; else :; fi; \
346	done | \
347	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
348	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
349	sed 'N;N;N;s,\n, ,g' | \
350	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
351	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
352	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
353	    else { print "f", $$3 "/" $$4, $$1; } } \
354	  END { for (d in files) print "f", d, files[d] }' | \
355	while read type dir files; do \
356	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
357	    test -z "$$files" || { \
358	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
359	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
360	    } \
361	; done
362
363uninstall-binPROGRAMS:
364	@$(NORMAL_UNINSTALL)
365	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
366	files=`for p in $$list; do echo "$$p"; done | \
367	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
368	      -e 's/$$/$(EXEEXT)/' `; \
369	test -n "$$list" || exit 0; \
370	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
371	cd "$(DESTDIR)$(bindir)" && rm -f $$files
372
373clean-binPROGRAMS:
374	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
375xlsfonts$(EXEEXT): $(xlsfonts_OBJECTS) $(xlsfonts_DEPENDENCIES) 
376	@rm -f xlsfonts$(EXEEXT)
377	$(AM_V_CCLD)$(LINK) $(xlsfonts_OBJECTS) $(xlsfonts_LDADD) $(LIBS)
378
379mostlyclean-compile:
380	-rm -f *.$(OBJEXT)
381
382distclean-compile:
383	-rm -f *.tab.c
384
385@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsimple.Po@am__quote@
386@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xlsfonts.Po@am__quote@
387
388.c.o:
389@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
390@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
391@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
392@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
393@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
394
395.c.obj:
396@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
397@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
398@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
399@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
400@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
401
402# This directory's subdirectories are mostly independent; you can cd
403# into them and run `make' without going through this Makefile.
404# To change the values of `make' variables: instead of editing Makefiles,
405# (1) if the variable is set in `config.status', edit `config.status'
406#     (which will cause the Makefiles to be regenerated when you run `make');
407# (2) otherwise, pass the desired values on the `make' command line.
408$(RECURSIVE_TARGETS):
409	@fail= failcom='exit 1'; \
410	for f in x $$MAKEFLAGS; do \
411	  case $$f in \
412	    *=* | --[!k]*);; \
413	    *k*) failcom='fail=yes';; \
414	  esac; \
415	done; \
416	dot_seen=no; \
417	target=`echo $@ | sed s/-recursive//`; \
418	list='$(SUBDIRS)'; for subdir in $$list; do \
419	  echo "Making $$target in $$subdir"; \
420	  if test "$$subdir" = "."; then \
421	    dot_seen=yes; \
422	    local_target="$$target-am"; \
423	  else \
424	    local_target="$$target"; \
425	  fi; \
426	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
427	  || eval $$failcom; \
428	done; \
429	if test "$$dot_seen" = "no"; then \
430	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
431	fi; test -z "$$fail"
432
433$(RECURSIVE_CLEAN_TARGETS):
434	@fail= failcom='exit 1'; \
435	for f in x $$MAKEFLAGS; do \
436	  case $$f in \
437	    *=* | --[!k]*);; \
438	    *k*) failcom='fail=yes';; \
439	  esac; \
440	done; \
441	dot_seen=no; \
442	case "$@" in \
443	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
444	  *) list='$(SUBDIRS)' ;; \
445	esac; \
446	rev=''; for subdir in $$list; do \
447	  if test "$$subdir" = "."; then :; else \
448	    rev="$$subdir $$rev"; \
449	  fi; \
450	done; \
451	rev="$$rev ."; \
452	target=`echo $@ | sed s/-recursive//`; \
453	for subdir in $$rev; do \
454	  echo "Making $$target in $$subdir"; \
455	  if test "$$subdir" = "."; then \
456	    local_target="$$target-am"; \
457	  else \
458	    local_target="$$target"; \
459	  fi; \
460	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
461	  || eval $$failcom; \
462	done && test -z "$$fail"
463tags-recursive:
464	list='$(SUBDIRS)'; for subdir in $$list; do \
465	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
466	done
467ctags-recursive:
468	list='$(SUBDIRS)'; for subdir in $$list; do \
469	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
470	done
471
472ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
473	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
474	unique=`for i in $$list; do \
475	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
476	  done | \
477	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
478	      END { if (nonempty) { for (i in files) print i; }; }'`; \
479	mkid -fID $$unique
480tags: TAGS
481
482TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
483		$(TAGS_FILES) $(LISP)
484	set x; \
485	here=`pwd`; \
486	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
487	  include_option=--etags-include; \
488	  empty_fix=.; \
489	else \
490	  include_option=--include; \
491	  empty_fix=; \
492	fi; \
493	list='$(SUBDIRS)'; for subdir in $$list; do \
494	  if test "$$subdir" = .; then :; else \
495	    test ! -f $$subdir/TAGS || \
496	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
497	  fi; \
498	done; \
499	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
500	unique=`for i in $$list; do \
501	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
502	  done | \
503	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
504	      END { if (nonempty) { for (i in files) print i; }; }'`; \
505	shift; \
506	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
507	  test -n "$$unique" || unique=$$empty_fix; \
508	  if test $$# -gt 0; then \
509	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
510	      "$$@" $$unique; \
511	  else \
512	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
513	      $$unique; \
514	  fi; \
515	fi
516ctags: CTAGS
517CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
518		$(TAGS_FILES) $(LISP)
519	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
520	unique=`for i in $$list; do \
521	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
522	  done | \
523	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
524	      END { if (nonempty) { for (i in files) print i; }; }'`; \
525	test -z "$(CTAGS_ARGS)$$unique" \
526	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
527	     $$unique
528
529GTAGS:
530	here=`$(am__cd) $(top_builddir) && pwd` \
531	  && $(am__cd) $(top_srcdir) \
532	  && gtags -i $(GTAGS_ARGS) "$$here"
533
534distclean-tags:
535	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
536
537distdir: $(DISTFILES)
538	$(am__remove_distdir)
539	test -d "$(distdir)" || mkdir "$(distdir)"
540	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
541	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
542	list='$(DISTFILES)'; \
543	  dist_files=`for file in $$list; do echo $$file; done | \
544	  sed -e "s|^$$srcdirstrip/||;t" \
545	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
546	case $$dist_files in \
547	  */*) $(MKDIR_P) `echo "$$dist_files" | \
548			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
549			   sort -u` ;; \
550	esac; \
551	for file in $$dist_files; do \
552	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
553	  if test -d $$d/$$file; then \
554	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
555	    if test -d "$(distdir)/$$file"; then \
556	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
557	    fi; \
558	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
559	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
560	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
561	    fi; \
562	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
563	  else \
564	    test -f "$(distdir)/$$file" \
565	    || cp -p $$d/$$file "$(distdir)/$$file" \
566	    || exit 1; \
567	  fi; \
568	done
569	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
570	  if test "$$subdir" = .; then :; else \
571	    test -d "$(distdir)/$$subdir" \
572	    || $(MKDIR_P) "$(distdir)/$$subdir" \
573	    || exit 1; \
574	  fi; \
575	done
576	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
577	  if test "$$subdir" = .; then :; else \
578	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
579	    $(am__relativize); \
580	    new_distdir=$$reldir; \
581	    dir1=$$subdir; dir2="$(top_distdir)"; \
582	    $(am__relativize); \
583	    new_top_distdir=$$reldir; \
584	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
585	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
586	    ($(am__cd) $$subdir && \
587	      $(MAKE) $(AM_MAKEFLAGS) \
588	        top_distdir="$$new_top_distdir" \
589	        distdir="$$new_distdir" \
590		am__remove_distdir=: \
591		am__skip_length_check=: \
592		am__skip_mode_fix=: \
593	        distdir) \
594	      || exit 1; \
595	  fi; \
596	done
597	$(MAKE) $(AM_MAKEFLAGS) \
598	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
599	  dist-hook
600	-test -n "$(am__skip_mode_fix)" \
601	|| find "$(distdir)" -type d ! -perm -755 \
602		-exec chmod u+rwx,go+rx {} \; -o \
603	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
604	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
605	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
606	|| chmod -R a+r "$(distdir)"
607dist-gzip: distdir
608	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
609	$(am__remove_distdir)
610dist-bzip2: distdir
611	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
612	$(am__remove_distdir)
613
614dist-lzma: distdir
615	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
616	$(am__remove_distdir)
617
618dist-xz: distdir
619	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
620	$(am__remove_distdir)
621
622dist-tarZ: distdir
623	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
624	$(am__remove_distdir)
625
626dist-shar: distdir
627	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
628	$(am__remove_distdir)
629
630dist-zip: distdir
631	-rm -f $(distdir).zip
632	zip -rq $(distdir).zip $(distdir)
633	$(am__remove_distdir)
634
635dist dist-all: distdir
636	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
637	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
638	$(am__remove_distdir)
639
640# This target untars the dist file and tries a VPATH configuration.  Then
641# it guarantees that the distribution is self-contained by making another
642# tarfile.
643distcheck: dist
644	case '$(DIST_ARCHIVES)' in \
645	*.tar.gz*) \
646	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
647	*.tar.bz2*) \
648	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
649	*.tar.lzma*) \
650	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
651	*.tar.xz*) \
652	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
653	*.tar.Z*) \
654	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
655	*.shar.gz*) \
656	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
657	*.zip*) \
658	  unzip $(distdir).zip ;;\
659	esac
660	chmod -R a-w $(distdir); chmod a+w $(distdir)
661	mkdir $(distdir)/_build
662	mkdir $(distdir)/_inst
663	chmod a-w $(distdir)
664	test -d $(distdir)/_build || exit 0; \
665	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
666	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
667	  && am__cwd=`pwd` \
668	  && $(am__cd) $(distdir)/_build \
669	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
670	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
671	    $(DISTCHECK_CONFIGURE_FLAGS) \
672	  && $(MAKE) $(AM_MAKEFLAGS) \
673	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
674	  && $(MAKE) $(AM_MAKEFLAGS) check \
675	  && $(MAKE) $(AM_MAKEFLAGS) install \
676	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
677	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
678	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
679	        distuninstallcheck \
680	  && chmod -R a-w "$$dc_install_base" \
681	  && ({ \
682	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
683	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
684	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
685	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
686	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
687	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
688	  && rm -rf "$$dc_destdir" \
689	  && $(MAKE) $(AM_MAKEFLAGS) dist \
690	  && rm -rf $(DIST_ARCHIVES) \
691	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
692	  && cd "$$am__cwd" \
693	  || exit 1
694	$(am__remove_distdir)
695	@(echo "$(distdir) archives ready for distribution: "; \
696	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
697	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
698distuninstallcheck:
699	@test -n '$(distuninstallcheck_dir)' || { \
700	  echo 'ERROR: trying to run $@ with an empty' \
701	       '$$(distuninstallcheck_dir)' >&2; \
702	  exit 1; \
703	}; \
704	$(am__cd) '$(distuninstallcheck_dir)' || { \
705	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
706	  exit 1; \
707	}; \
708	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
709	   || { echo "ERROR: files left after uninstall:" ; \
710	        if test -n "$(DESTDIR)"; then \
711	          echo "  (check DESTDIR support)"; \
712	        fi ; \
713	        $(distuninstallcheck_listfiles) ; \
714	        exit 1; } >&2
715distcleancheck: distclean
716	@if test '$(srcdir)' = . ; then \
717	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
718	  exit 1 ; \
719	fi
720	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
721	  || { echo "ERROR: files left in build directory after distclean:" ; \
722	       $(distcleancheck_listfiles) ; \
723	       exit 1; } >&2
724check-am: all-am
725check: check-recursive
726all-am: Makefile $(PROGRAMS) config.h
727installdirs: installdirs-recursive
728installdirs-am:
729	for dir in "$(DESTDIR)$(bindir)"; do \
730	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
731	done
732install: install-recursive
733install-exec: install-exec-recursive
734install-data: install-data-recursive
735uninstall: uninstall-recursive
736
737install-am: all-am
738	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
739
740installcheck: installcheck-recursive
741install-strip:
742	if test -z '$(STRIP)'; then \
743	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
744	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
745	      install; \
746	else \
747	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
748	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
749	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
750	fi
751mostlyclean-generic:
752
753clean-generic:
754
755distclean-generic:
756	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
757	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
758
759maintainer-clean-generic:
760	@echo "This command is intended for maintainers to use"
761	@echo "it deletes files that may require special tools to rebuild."
762	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
763clean: clean-recursive
764
765clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
766
767distclean: distclean-recursive
768	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
769	-rm -rf ./$(DEPDIR)
770	-rm -f Makefile
771distclean-am: clean-am distclean-compile distclean-generic \
772	distclean-hdr distclean-tags
773
774dvi: dvi-recursive
775
776dvi-am:
777
778html: html-recursive
779
780html-am:
781
782info: info-recursive
783
784info-am:
785
786install-data-am:
787
788install-dvi: install-dvi-recursive
789
790install-dvi-am:
791
792install-exec-am: install-binPROGRAMS
793
794install-html: install-html-recursive
795
796install-html-am:
797
798install-info: install-info-recursive
799
800install-info-am:
801
802install-man:
803
804install-pdf: install-pdf-recursive
805
806install-pdf-am:
807
808install-ps: install-ps-recursive
809
810install-ps-am:
811
812installcheck-am:
813
814maintainer-clean: maintainer-clean-recursive
815	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
816	-rm -rf $(top_srcdir)/autom4te.cache
817	-rm -rf ./$(DEPDIR)
818	-rm -f Makefile
819maintainer-clean-am: distclean-am maintainer-clean-generic
820
821mostlyclean: mostlyclean-recursive
822
823mostlyclean-am: mostlyclean-compile mostlyclean-generic
824
825pdf: pdf-recursive
826
827pdf-am:
828
829ps: ps-recursive
830
831ps-am:
832
833uninstall-am: uninstall-binPROGRAMS
834
835.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
836	ctags-recursive install-am install-strip tags-recursive
837
838.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
839	all all-am am--refresh check check-am clean clean-binPROGRAMS \
840	clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \
841	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
842	dist-zip distcheck distclean distclean-compile \
843	distclean-generic distclean-hdr distclean-tags distcleancheck \
844	distdir distuninstallcheck dvi dvi-am html html-am info \
845	info-am install install-am install-binPROGRAMS install-data \
846	install-data-am install-dvi install-dvi-am install-exec \
847	install-exec-am install-html install-html-am install-info \
848	install-info-am install-man install-pdf install-pdf-am \
849	install-ps install-ps-am install-strip installcheck \
850	installcheck-am installdirs installdirs-am maintainer-clean \
851	maintainer-clean-generic mostlyclean mostlyclean-compile \
852	mostlyclean-generic pdf pdf-am ps ps-am tags tags-recursive \
853	uninstall uninstall-am uninstall-binPROGRAMS
854
855
856.PHONY: ChangeLog INSTALL
857
858INSTALL:
859	$(INSTALL_CMD)
860
861ChangeLog:
862	$(CHANGELOG_CMD)
863
864dist-hook: ChangeLog INSTALL
865
866# Tell versions [3.59,3.63) of GNU make to not export all variables.
867# Otherwise a system limit (for SysV at least) may be exceeded.
868.NOEXPORT:
869