1# Makefile.in generated by automake 1.17 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2024 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# 
18#  Copyright 2005  Red Hat, Inc.
19# 
20#  Permission to use, copy, modify, distribute, and sell this software and its
21#  documentation for any purpose is hereby granted without fee, provided that
22#  the above copyright notice appear in all copies and that both that
23#  copyright notice and this permission notice appear in supporting
24#  documentation, and that the name of Red Hat not be used in
25#  advertising or publicity pertaining to distribution of the software without
26#  specific, written prior permission.  Red Hat makes no
27#  representations about the suitability of this software for any purpose.  It
28#  is provided "as is" without express or implied warranty.
29# 
30#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32#  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34#  DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35#  TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36#  PERFORMANCE OF THIS SOFTWARE.
37
38VPATH = @srcdir@
39am__is_gnu_make = { \
40  if test -z '$(MAKELEVEL)'; then \
41    false; \
42  elif test -n '$(MAKE_HOST)'; then \
43    true; \
44  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
45    true; \
46  else \
47    false; \
48  fi; \
49}
50am__make_running_with_option = \
51  case $${target_option-} in \
52      ?) ;; \
53      *) echo "am__make_running_with_option: internal error: invalid" \
54              "target option '$${target_option-}' specified" >&2; \
55         exit 1;; \
56  esac; \
57  has_opt=no; \
58  sane_makeflags=$$MAKEFLAGS; \
59  if $(am__is_gnu_make); then \
60    sane_makeflags=$$MFLAGS; \
61  else \
62    case $$MAKEFLAGS in \
63      *\\[\ \	]*) \
64        bs=\\; \
65        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
66          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
67    esac; \
68  fi; \
69  skip_next=no; \
70  strip_trailopt () \
71  { \
72    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
73  }; \
74  for flg in $$sane_makeflags; do \
75    test $$skip_next = yes && { skip_next=no; continue; }; \
76    case $$flg in \
77      *=*|--*) continue;; \
78        -*I) strip_trailopt 'I'; skip_next=yes;; \
79      -*I?*) strip_trailopt 'I';; \
80        -*O) strip_trailopt 'O'; skip_next=yes;; \
81      -*O?*) strip_trailopt 'O';; \
82        -*l) strip_trailopt 'l'; skip_next=yes;; \
83      -*l?*) strip_trailopt 'l';; \
84      -[dEDm]) skip_next=yes;; \
85      -[JT]) skip_next=yes;; \
86    esac; \
87    case $$flg in \
88      *$$target_option*) has_opt=yes; break;; \
89    esac; \
90  done; \
91  test $$has_opt = yes
92am__make_dryrun = (target_option=n; $(am__make_running_with_option))
93am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
94am__rm_f = rm -f $(am__rm_f_notfound)
95am__rm_rf = rm -rf $(am__rm_f_notfound)
96pkgdatadir = $(datadir)/@PACKAGE@
97pkgincludedir = $(includedir)/@PACKAGE@
98pkglibdir = $(libdir)/@PACKAGE@
99pkglibexecdir = $(libexecdir)/@PACKAGE@
100am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
101install_sh_DATA = $(install_sh) -c -m 644
102install_sh_PROGRAM = $(install_sh) -c
103install_sh_SCRIPT = $(install_sh) -c
104INSTALL_HEADER = $(INSTALL_DATA)
105transform = $(program_transform_name)
106NORMAL_INSTALL = :
107PRE_INSTALL = :
108POST_INSTALL = :
109NORMAL_UNINSTALL = :
110PRE_UNINSTALL = :
111POST_UNINSTALL = :
112build_triplet = @build@
113host_triplet = @host@
114bin_PROGRAMS = xprop$(EXEEXT)
115subdir = .
116ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
117am__aclocal_m4_deps = $(top_srcdir)/configure.ac
118am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
119	$(ACLOCAL_M4)
120DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
121	$(am__configure_deps) $(am__DIST_COMMON)
122am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
123 configure.lineno config.status.lineno
124mkinstalldirs = $(install_sh) -d
125CONFIG_HEADER = config.h
126CONFIG_CLEAN_FILES =
127CONFIG_CLEAN_VPATH_FILES =
128am__installdirs = "$(DESTDIR)$(bindir)"
129PROGRAMS = $(bin_PROGRAMS)
130am_xprop_OBJECTS = dsimple.$(OBJEXT) clientwin.$(OBJEXT) \
131	xprop.$(OBJEXT)
132xprop_OBJECTS = $(am_xprop_OBJECTS)
133am__DEPENDENCIES_1 =
134xprop_DEPENDENCIES = $(am__DEPENDENCIES_1)
135AM_V_P = $(am__v_P_@AM_V@)
136am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
137am__v_P_0 = false
138am__v_P_1 = :
139AM_V_GEN = $(am__v_GEN_@AM_V@)
140am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
141am__v_GEN_0 = @echo "  GEN     " $@;
142am__v_GEN_1 = 
143AM_V_at = $(am__v_at_@AM_V@)
144am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
145am__v_at_0 = @
146am__v_at_1 = 
147DEFAULT_INCLUDES = -I.@am__isrc@
148depcomp = $(SHELL) $(top_srcdir)/depcomp
149am__maybe_remake_depfiles = depfiles
150am__depfiles_remade = ./$(DEPDIR)/clientwin.Po ./$(DEPDIR)/dsimple.Po \
151	./$(DEPDIR)/xprop.Po
152am__mv = mv -f
153COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
154	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
155AM_V_CC = $(am__v_CC_@AM_V@)
156am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
157am__v_CC_0 = @echo "  CC      " $@;
158am__v_CC_1 = 
159CCLD = $(CC)
160LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
161AM_V_CCLD = $(am__v_CCLD_@AM_V@)
162am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
163am__v_CCLD_0 = @echo "  CCLD    " $@;
164am__v_CCLD_1 = 
165SOURCES = $(xprop_SOURCES)
166DIST_SOURCES = $(xprop_SOURCES)
167RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
168	ctags-recursive dvi-recursive html-recursive info-recursive \
169	install-data-recursive install-dvi-recursive \
170	install-exec-recursive install-html-recursive \
171	install-info-recursive install-pdf-recursive \
172	install-ps-recursive install-recursive installcheck-recursive \
173	installdirs-recursive pdf-recursive ps-recursive \
174	tags-recursive uninstall-recursive
175am__can_run_installinfo = \
176  case $$AM_UPDATE_INFO_DIR in \
177    n|no|NO) false;; \
178    *) (install-info --version) >/dev/null 2>&1;; \
179  esac
180RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
181  distclean-recursive maintainer-clean-recursive
182am__recursive_targets = \
183  $(RECURSIVE_TARGETS) \
184  $(RECURSIVE_CLEAN_TARGETS) \
185  $(am__extra_recursive_targets)
186AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
187	cscope distdir distdir-am dist dist-all distcheck
188am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
189	config.h.in
190# Read a list of newline-separated strings from the standard input,
191# and print each of them once, without duplicates.  Input order is
192# *not* preserved.
193am__uniquify_input = $(AWK) '\
194  BEGIN { nonempty = 0; } \
195  { items[$$0] = 1; nonempty = 1; } \
196  END { if (nonempty) { for (i in items) print i; }; } \
197'
198# Make sure the list of sources is unique.  This is necessary because,
199# e.g., the same source file might be shared among _SOURCES variables
200# for different programs/libraries.
201am__define_uniq_tagged_files = \
202  list='$(am__tagged_files)'; \
203  unique=`for i in $$list; do \
204    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
205  done | $(am__uniquify_input)`
206DIST_SUBDIRS = $(SUBDIRS)
207am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in COPYING \
208	ChangeLog INSTALL README.md compile config.guess config.sub \
209	depcomp install-sh missing
210DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
211distdir = $(PACKAGE)-$(VERSION)
212top_distdir = $(distdir)
213am__remove_distdir = \
214  if test -d "$(distdir)"; then \
215    find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
216      ; rm -rf "$(distdir)" \
217      || { sleep 5 && rm -rf "$(distdir)"; }; \
218  else :; fi
219am__post_remove_distdir = $(am__remove_distdir)
220am__relativize = \
221  dir0=`pwd`; \
222  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
223  sed_rest='s,^[^/]*/*,,'; \
224  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
225  sed_butlast='s,/*[^/]*$$,,'; \
226  while test -n "$$dir1"; do \
227    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
228    if test "$$first" != "."; then \
229      if test "$$first" = ".."; then \
230        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
231        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
232      else \
233        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
234        if test "$$first2" = "$$first"; then \
235          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
236        else \
237          dir2="../$$dir2"; \
238        fi; \
239        dir0="$$dir0"/"$$first"; \
240      fi; \
241    fi; \
242    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
243  done; \
244  reldir="$$dir2"
245DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
246GZIP_ENV = -9
247DIST_TARGETS = dist-xz dist-gzip
248# Exists only to be overridden by the user if desired.
249AM_DISTCHECK_DVI_TARGET = dvi
250distuninstallcheck_listfiles = find . -type f -print
251am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
252  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
253distcleancheck_listfiles = \
254  find . \( -type f -a \! \
255            \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
256ACLOCAL = @ACLOCAL@
257ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
258ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
259AMTAR = @AMTAR@
260AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
261APP_MAN_DIR = @APP_MAN_DIR@
262APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
263AUTOCONF = @AUTOCONF@
264AUTOHEADER = @AUTOHEADER@
265AUTOMAKE = @AUTOMAKE@
266AWK = @AWK@
267BASE_CFLAGS = @BASE_CFLAGS@
268CC = @CC@
269CCDEPMODE = @CCDEPMODE@
270CFLAGS = @CFLAGS@
271CHANGELOG_CMD = @CHANGELOG_CMD@
272CPPFLAGS = @CPPFLAGS@
273CSCOPE = @CSCOPE@
274CTAGS = @CTAGS@
275CWARNFLAGS = @CWARNFLAGS@
276CYGPATH_W = @CYGPATH_W@
277DEFS = @DEFS@
278DEPDIR = @DEPDIR@
279DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
280DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
281ECHO_C = @ECHO_C@
282ECHO_N = @ECHO_N@
283ECHO_T = @ECHO_T@
284ETAGS = @ETAGS@
285EXEEXT = @EXEEXT@
286FILE_MAN_DIR = @FILE_MAN_DIR@
287FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
288INSTALL = @INSTALL@
289INSTALL_CMD = @INSTALL_CMD@
290INSTALL_DATA = @INSTALL_DATA@
291INSTALL_PROGRAM = @INSTALL_PROGRAM@
292INSTALL_SCRIPT = @INSTALL_SCRIPT@
293INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
294LDFLAGS = @LDFLAGS@
295LIBOBJS = @LIBOBJS@
296LIBS = @LIBS@
297LIB_MAN_DIR = @LIB_MAN_DIR@
298LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
299LINT = @LINT@
300LINT_FLAGS = @LINT_FLAGS@
301LTLIBOBJS = @LTLIBOBJS@
302MAKEINFO = @MAKEINFO@
303MAN_SUBSTS = @MAN_SUBSTS@
304MISC_MAN_DIR = @MISC_MAN_DIR@
305MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
306MKDIR_P = @MKDIR_P@
307OBJEXT = @OBJEXT@
308PACKAGE = @PACKAGE@
309PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
310PACKAGE_NAME = @PACKAGE_NAME@
311PACKAGE_STRING = @PACKAGE_STRING@
312PACKAGE_TARNAME = @PACKAGE_TARNAME@
313PACKAGE_URL = @PACKAGE_URL@
314PACKAGE_VERSION = @PACKAGE_VERSION@
315PATH_SEPARATOR = @PATH_SEPARATOR@
316PKG_CONFIG = @PKG_CONFIG@
317PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
318PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
319SED = @SED@
320SET_MAKE = @SET_MAKE@
321SHELL = @SHELL@
322STRICT_CFLAGS = @STRICT_CFLAGS@
323STRIP = @STRIP@
324VERSION = @VERSION@
325XORG_MAN_PAGE = @XORG_MAN_PAGE@
326XPROP_CFLAGS = @XPROP_CFLAGS@
327XPROP_LIBS = @XPROP_LIBS@
328abs_builddir = @abs_builddir@
329abs_srcdir = @abs_srcdir@
330abs_top_builddir = @abs_top_builddir@
331abs_top_srcdir = @abs_top_srcdir@
332ac_ct_CC = @ac_ct_CC@
333am__include = @am__include@
334am__leading_dot = @am__leading_dot@
335am__quote = @am__quote@
336am__rm_f_notfound = @am__rm_f_notfound@
337am__tar = @am__tar@
338am__untar = @am__untar@
339am__xargs_n = @am__xargs_n@
340bindir = @bindir@
341build = @build@
342build_alias = @build_alias@
343build_cpu = @build_cpu@
344build_os = @build_os@
345build_vendor = @build_vendor@
346builddir = @builddir@
347datadir = @datadir@
348datarootdir = @datarootdir@
349docdir = @docdir@
350dvidir = @dvidir@
351exec_prefix = @exec_prefix@
352host = @host@
353host_alias = @host_alias@
354host_cpu = @host_cpu@
355host_os = @host_os@
356host_vendor = @host_vendor@
357htmldir = @htmldir@
358includedir = @includedir@
359infodir = @infodir@
360install_sh = @install_sh@
361libdir = @libdir@
362libexecdir = @libexecdir@
363localedir = @localedir@
364localstatedir = @localstatedir@
365mandir = @mandir@
366mkdir_p = @mkdir_p@
367oldincludedir = @oldincludedir@
368pdfdir = @pdfdir@
369prefix = @prefix@
370program_transform_name = @program_transform_name@
371psdir = @psdir@
372runstatedir = @runstatedir@
373sbindir = @sbindir@
374sharedstatedir = @sharedstatedir@
375srcdir = @srcdir@
376sysconfdir = @sysconfdir@
377target_alias = @target_alias@
378top_build_prefix = @top_build_prefix@
379top_builddir = @top_builddir@
380top_srcdir = @top_srcdir@
381SUBDIRS = man
382AM_CFLAGS = $(CWARNFLAGS) $(XPROP_CFLAGS)
383xprop_LDADD = $(XPROP_LIBS)
384xprop_SOURCES = \
385        dsimple.c \
386        dsimple.h \
387        clientwin.c \
388        clientwin.h \
389        xprop.c
390
391MAINTAINERCLEANFILES = ChangeLog INSTALL
392@LINT_TRUE@ALL_LINT_FLAGS = $(LINT_FLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
393@LINT_TRUE@		$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS)
394
395EXTRA_DIST = README.md
396all: config.h
397	$(MAKE) $(AM_MAKEFLAGS) all-recursive
398
399.SUFFIXES:
400.SUFFIXES: .c .o .obj
401am--refresh: Makefile
402	@:
403$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
404	@for dep in $?; do \
405	  case '$(am__configure_deps)' in \
406	    *$$dep*) \
407	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
408	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
409		&& exit 0; \
410	      exit 1;; \
411	  esac; \
412	done; \
413	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
414	$(am__cd) $(top_srcdir) && \
415	  $(AUTOMAKE) --foreign Makefile
416Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
417	@case '$?' in \
418	  *config.status*) \
419	    echo ' $(SHELL) ./config.status'; \
420	    $(SHELL) ./config.status;; \
421	  *) \
422	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
423	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
424	esac;
425
426$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
427	$(SHELL) ./config.status --recheck
428
429$(top_srcdir)/configure:  $(am__configure_deps)
430	$(am__cd) $(srcdir) && $(AUTOCONF)
431$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
432	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
433$(am__aclocal_m4_deps):
434
435config.h: stamp-h1
436	@test -f $@ || rm -f stamp-h1
437	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
438
439stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
440	$(AM_V_at)rm -f stamp-h1
441	$(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status config.h
442$(srcdir)/config.h.in:  $(am__configure_deps) 
443	$(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER))
444	$(AM_V_at)rm -f stamp-h1
445	$(AM_V_at)touch $@
446
447distclean-hdr:
448	-rm -f config.h stamp-h1
449install-binPROGRAMS: $(bin_PROGRAMS)
450	@$(NORMAL_INSTALL)
451	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
452	if test -n "$$list"; then \
453	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
454	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
455	fi; \
456	for p in $$list; do echo "$$p $$p"; done | \
457	sed 's/$(EXEEXT)$$//' | \
458	while read p p1; do if test -f $$p \
459	  ; then echo "$$p"; echo "$$p"; else :; fi; \
460	done | \
461	sed -e 'p;s,.*/,,;n;h' \
462	    -e 's|.*|.|' \
463	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
464	sed 'N;N;N;s,\n, ,g' | \
465	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
466	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
467	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
468	    else { print "f", $$3 "/" $$4, $$1; } } \
469	  END { for (d in files) print "f", d, files[d] }' | \
470	while read type dir files; do \
471	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
472	    test -z "$$files" || { \
473	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
474	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
475	    } \
476	; done
477
478uninstall-binPROGRAMS:
479	@$(NORMAL_UNINSTALL)
480	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
481	files=`for p in $$list; do echo "$$p"; done | \
482	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
483	      -e 's/$$/$(EXEEXT)/' \
484	`; \
485	test -n "$$list" || exit 0; \
486	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
487	cd "$(DESTDIR)$(bindir)" && $(am__rm_f) $$files
488
489clean-binPROGRAMS:
490	-$(am__rm_f) $(bin_PROGRAMS)
491
492xprop$(EXEEXT): $(xprop_OBJECTS) $(xprop_DEPENDENCIES) $(EXTRA_xprop_DEPENDENCIES) 
493	@rm -f xprop$(EXEEXT)
494	$(AM_V_CCLD)$(LINK) $(xprop_OBJECTS) $(xprop_LDADD) $(LIBS)
495
496mostlyclean-compile:
497	-rm -f *.$(OBJEXT)
498
499distclean-compile:
500	-rm -f *.tab.c
501
502@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clientwin.Po@am__quote@ # am--include-marker
503@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dsimple.Po@am__quote@ # am--include-marker
504@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xprop.Po@am__quote@ # am--include-marker
505
506$(am__depfiles_remade):
507	@$(MKDIR_P) $(@D)
508	@: >>$@
509
510am--depfiles: $(am__depfiles_remade)
511
512.c.o:
513@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
514@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
515@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
516@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
517@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
518
519.c.obj:
520@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
521@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
522@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
523@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
524@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
525
526# This directory's subdirectories are mostly independent; you can cd
527# into them and run 'make' without going through this Makefile.
528# To change the values of 'make' variables: instead of editing Makefiles,
529# (1) if the variable is set in 'config.status', edit 'config.status'
530#     (which will cause the Makefiles to be regenerated when you run 'make');
531# (2) otherwise, pass the desired values on the 'make' command line.
532$(am__recursive_targets):
533	@fail=; \
534	if $(am__make_keepgoing); then \
535	  failcom='fail=yes'; \
536	else \
537	  failcom='exit 1'; \
538	fi; \
539	dot_seen=no; \
540	target=`echo $@ | sed s/-recursive//`; \
541	case "$@" in \
542	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
543	  *) list='$(SUBDIRS)' ;; \
544	esac; \
545	for subdir in $$list; do \
546	  echo "Making $$target in $$subdir"; \
547	  if test "$$subdir" = "."; then \
548	    dot_seen=yes; \
549	    local_target="$$target-am"; \
550	  else \
551	    local_target="$$target"; \
552	  fi; \
553	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
554	  || eval $$failcom; \
555	done; \
556	if test "$$dot_seen" = "no"; then \
557	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
558	fi; test -z "$$fail"
559
560ID: $(am__tagged_files)
561	$(am__define_uniq_tagged_files); mkid -fID $$unique
562tags: tags-recursive
563TAGS: tags
564
565tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
566	set x; \
567	here=`pwd`; \
568	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
569	  include_option=--etags-include; \
570	  empty_fix=.; \
571	else \
572	  include_option=--include; \
573	  empty_fix=; \
574	fi; \
575	list='$(SUBDIRS)'; for subdir in $$list; do \
576	  if test "$$subdir" = .; then :; else \
577	    test ! -f $$subdir/TAGS || \
578	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
579	  fi; \
580	done; \
581	$(am__define_uniq_tagged_files); \
582	shift; \
583	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
584	  test -n "$$unique" || unique=$$empty_fix; \
585	  if test $$# -gt 0; then \
586	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
587	      "$$@" $$unique; \
588	  else \
589	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
590	      $$unique; \
591	  fi; \
592	fi
593ctags: ctags-recursive
594
595CTAGS: ctags
596ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
597	$(am__define_uniq_tagged_files); \
598	test -z "$(CTAGS_ARGS)$$unique" \
599	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
600	     $$unique
601
602GTAGS:
603	here=`$(am__cd) $(top_builddir) && pwd` \
604	  && $(am__cd) $(top_srcdir) \
605	  && gtags -i $(GTAGS_ARGS) "$$here"
606cscope: cscope.files
607	test ! -s cscope.files \
608	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
609clean-cscope:
610	-rm -f cscope.files
611cscope.files: clean-cscope cscopelist
612cscopelist: cscopelist-recursive
613
614cscopelist-am: $(am__tagged_files)
615	list='$(am__tagged_files)'; \
616	case "$(srcdir)" in \
617	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
618	  *) sdir=$(subdir)/$(srcdir) ;; \
619	esac; \
620	for i in $$list; do \
621	  if test -f "$$i"; then \
622	    echo "$(subdir)/$$i"; \
623	  else \
624	    echo "$$sdir/$$i"; \
625	  fi; \
626	done >> $(top_builddir)/cscope.files
627
628distclean-tags:
629	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
630	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
631distdir: $(BUILT_SOURCES)
632	$(MAKE) $(AM_MAKEFLAGS) distdir-am
633
634distdir-am: $(DISTFILES)
635	$(am__remove_distdir)
636	$(AM_V_at)$(MKDIR_P) "$(distdir)"
637	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
638	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
639	list='$(DISTFILES)'; \
640	  dist_files=`for file in $$list; do echo $$file; done | \
641	  sed -e "s|^$$srcdirstrip/||;t" \
642	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
643	case $$dist_files in \
644	  */*) $(MKDIR_P) `echo "$$dist_files" | \
645			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
646			   sort -u` ;; \
647	esac; \
648	for file in $$dist_files; do \
649	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
650	  if test -d $$d/$$file; then \
651	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
652	    if test -d "$(distdir)/$$file"; then \
653	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
654	    fi; \
655	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
656	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
657	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
658	    fi; \
659	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
660	  else \
661	    test -f "$(distdir)/$$file" \
662	    || cp -p $$d/$$file "$(distdir)/$$file" \
663	    || exit 1; \
664	  fi; \
665	done
666	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
667	  if test "$$subdir" = .; then :; else \
668	    $(am__make_dryrun) \
669	      || test -d "$(distdir)/$$subdir" \
670	      || $(MKDIR_P) "$(distdir)/$$subdir" \
671	      || exit 1; \
672	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
673	    $(am__relativize); \
674	    new_distdir=$$reldir; \
675	    dir1=$$subdir; dir2="$(top_distdir)"; \
676	    $(am__relativize); \
677	    new_top_distdir=$$reldir; \
678	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
679	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
680	    ($(am__cd) $$subdir && \
681	      $(MAKE) $(AM_MAKEFLAGS) \
682	        top_distdir="$$new_top_distdir" \
683	        distdir="$$new_distdir" \
684		am__remove_distdir=: \
685		am__skip_length_check=: \
686		am__skip_mode_fix=: \
687	        distdir) \
688	      || exit 1; \
689	  fi; \
690	done
691	$(MAKE) $(AM_MAKEFLAGS) \
692	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
693	  dist-hook
694	-test -n "$(am__skip_mode_fix)" \
695	|| find "$(distdir)" -type d ! -perm -755 \
696		-exec chmod u+rwx,go+rx {} \; -o \
697	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
698	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
699	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
700	|| chmod -R a+r "$(distdir)"
701dist-gzip: distdir
702	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
703	$(am__post_remove_distdir)
704
705dist-bzip2: distdir
706	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
707	$(am__post_remove_distdir)
708
709dist-lzip: distdir
710	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
711	$(am__post_remove_distdir)
712dist-xz: distdir
713	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
714	$(am__post_remove_distdir)
715
716dist-zstd: distdir
717	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
718	$(am__post_remove_distdir)
719
720dist-tarZ: distdir
721	@echo WARNING: "Support for distribution archives compressed with" \
722		       "legacy program 'compress' is deprecated." >&2
723	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
724	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
725	$(am__post_remove_distdir)
726
727dist-shar: distdir
728	@echo WARNING: "Support for shar distribution archives is" \
729	               "deprecated." >&2
730	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
731	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
732	$(am__post_remove_distdir)
733
734dist-zip: distdir
735	-rm -f $(distdir).zip
736	zip -rq $(distdir).zip $(distdir)
737	$(am__post_remove_distdir)
738
739dist dist-all:
740	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
741	$(am__post_remove_distdir)
742
743# This target untars the dist file and tries a VPATH configuration.  Then
744# it guarantees that the distribution is self-contained by making another
745# tarfile.
746distcheck: dist
747	case '$(DIST_ARCHIVES)' in \
748	*.tar.gz*) \
749	  eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
750	*.tar.bz2*) \
751	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
752	*.tar.lz*) \
753	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
754	*.tar.xz*) \
755	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
756	*.tar.Z*) \
757	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
758	*.shar.gz*) \
759	  eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
760	*.zip*) \
761	  unzip $(distdir).zip ;;\
762	*.tar.zst*) \
763	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
764	esac
765	chmod -R a-w $(distdir)
766	chmod u+w $(distdir)
767	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
768	chmod a-w $(distdir)
769	test -d $(distdir)/_build || exit 0; \
770	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
771	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
772	  && am__cwd=`pwd` \
773	  && $(am__cd) $(distdir)/_build/sub \
774	  && ../../configure \
775	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
776	    $(DISTCHECK_CONFIGURE_FLAGS) \
777	    --srcdir=../.. --prefix="$$dc_install_base" \
778	  && $(MAKE) $(AM_MAKEFLAGS) \
779	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
780	  && $(MAKE) $(AM_MAKEFLAGS) check \
781	  && $(MAKE) $(AM_MAKEFLAGS) install \
782	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
783	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
784	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
785	        distuninstallcheck \
786	  && chmod -R a-w "$$dc_install_base" \
787	  && ({ \
788	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
789	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
790	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
791	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
792	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
793	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
794	  && rm -rf "$$dc_destdir" \
795	  && $(MAKE) $(AM_MAKEFLAGS) dist \
796	  && rm -rf $(DIST_ARCHIVES) \
797	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
798	  && cd "$$am__cwd" \
799	  || exit 1
800	$(am__post_remove_distdir)
801	@(echo "$(distdir) archives ready for distribution: "; \
802	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
803	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
804distuninstallcheck:
805	@test -n '$(distuninstallcheck_dir)' || { \
806	  echo 'ERROR: trying to run $@ with an empty' \
807	       '$$(distuninstallcheck_dir)' >&2; \
808	  exit 1; \
809	}; \
810	$(am__cd) '$(distuninstallcheck_dir)' || { \
811	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
812	  exit 1; \
813	}; \
814	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
815	   || { echo "ERROR: files left after uninstall:" ; \
816	        if test -n "$(DESTDIR)"; then \
817	          echo "  (check DESTDIR support)"; \
818	        fi ; \
819	        $(distuninstallcheck_listfiles) ; \
820	        exit 1; } >&2
821distcleancheck: distclean
822	@if test '$(srcdir)' = . ; then \
823	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
824	  exit 1 ; \
825	fi
826	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
827	  || { echo "ERROR: files left in build directory after distclean:" ; \
828	       $(distcleancheck_listfiles) ; \
829	       exit 1; } >&2
830check-am: all-am
831check: check-recursive
832all-am: Makefile $(PROGRAMS) config.h
833installdirs: installdirs-recursive
834installdirs-am:
835	for dir in "$(DESTDIR)$(bindir)"; do \
836	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
837	done
838install: install-recursive
839install-exec: install-exec-recursive
840install-data: install-data-recursive
841uninstall: uninstall-recursive
842
843install-am: all-am
844	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
845
846installcheck: installcheck-recursive
847install-strip:
848	if test -z '$(STRIP)'; then \
849	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
850	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
851	      install; \
852	else \
853	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
854	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
855	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
856	fi
857mostlyclean-generic:
858
859clean-generic:
860
861distclean-generic:
862	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
863	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
864
865maintainer-clean-generic:
866	@echo "This command is intended for maintainers to use"
867	@echo "it deletes files that may require special tools to rebuild."
868	-$(am__rm_f) $(MAINTAINERCLEANFILES)
869clean: clean-recursive
870
871clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
872
873distclean: distclean-recursive
874	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
875	-rm -f ./$(DEPDIR)/clientwin.Po
876	-rm -f ./$(DEPDIR)/dsimple.Po
877	-rm -f ./$(DEPDIR)/xprop.Po
878	-rm -f Makefile
879distclean-am: clean-am distclean-compile distclean-generic \
880	distclean-hdr distclean-tags
881
882dvi: dvi-recursive
883
884dvi-am:
885
886html: html-recursive
887
888html-am:
889
890info: info-recursive
891
892info-am:
893
894install-data-am:
895
896install-dvi: install-dvi-recursive
897
898install-dvi-am:
899
900install-exec-am: install-binPROGRAMS
901
902install-html: install-html-recursive
903
904install-html-am:
905
906install-info: install-info-recursive
907
908install-info-am:
909
910install-man:
911
912install-pdf: install-pdf-recursive
913
914install-pdf-am:
915
916install-ps: install-ps-recursive
917
918install-ps-am:
919
920installcheck-am:
921
922maintainer-clean: maintainer-clean-recursive
923	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
924	-rm -rf $(top_srcdir)/autom4te.cache
925	-rm -f ./$(DEPDIR)/clientwin.Po
926	-rm -f ./$(DEPDIR)/dsimple.Po
927	-rm -f ./$(DEPDIR)/xprop.Po
928	-rm -f Makefile
929maintainer-clean-am: distclean-am maintainer-clean-generic
930
931mostlyclean: mostlyclean-recursive
932
933mostlyclean-am: mostlyclean-compile mostlyclean-generic
934
935pdf: pdf-recursive
936
937pdf-am:
938
939ps: ps-recursive
940
941ps-am:
942
943uninstall-am: uninstall-binPROGRAMS
944
945.MAKE: $(am__recursive_targets) all install-am install-strip
946
947.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
948	am--depfiles am--refresh check check-am clean \
949	clean-binPROGRAMS clean-cscope clean-generic cscope \
950	cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
951	dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \
952	dist-zip dist-zstd distcheck distclean distclean-compile \
953	distclean-generic distclean-hdr distclean-tags distcleancheck \
954	distdir distuninstallcheck dvi dvi-am html html-am info \
955	info-am install install-am install-binPROGRAMS install-data \
956	install-data-am install-dvi install-dvi-am install-exec \
957	install-exec-am install-html install-html-am install-info \
958	install-info-am install-man install-pdf install-pdf-am \
959	install-ps install-ps-am install-strip installcheck \
960	installcheck-am installdirs installdirs-am maintainer-clean \
961	maintainer-clean-generic mostlyclean mostlyclean-compile \
962	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
963	uninstall-am uninstall-binPROGRAMS
964
965.PRECIOUS: Makefile
966
967
968.PHONY: ChangeLog INSTALL
969
970INSTALL:
971	$(INSTALL_CMD)
972
973ChangeLog:
974	$(CHANGELOG_CMD)
975
976dist-hook: ChangeLog INSTALL
977
978@LINT_TRUE@lint:
979@LINT_TRUE@	$(LINT) $(ALL_LINT_FLAGS) $(xprop_SOURCES)
980
981# Tell versions [3.59,3.63) of GNU make to not export all variables.
982# Otherwise a system limit (for SysV at least) may be exceeded.
983.NOEXPORT:
984
985# Tell GNU make to disable its built-in pattern rules.
986%:: %,v
987%:: RCS/%,v
988%:: RCS/%
989%:: s.%
990%:: SCCS/s.%
991