Use full available ram disk space

branches: 1.32.12;
+= for MAKEFS_FLAGS

branches: 1.31.8; 1.31.12;
Add dhcpcd(8) to alpha's INSTALL ramdisk.

branches: 1.30.6; 1.30.12;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

branches: 1.23.12;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

use ${PRINTOBJDIR}
(mmm, finding make -j N>1 build bugs)

branches: 1.20.2;
yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

use ${DISTRIBDIR} instead of ${_SRC_TOP_}/distrib

tweak how distrib/Makefile.inc is pulled in

parselist.awk
- improve comments
- provide a general purpose variable replacement; replace contents of ${FOO}
with ENVIRON["FOO"].
- deprecate @MACHINE@ and @MACHINE_ARCH@ in favour of using ${MACHINE}
and ${MACHINE_ARCH} instead
- add errx() function; like err(), but doesn't print the line number
- invoke this script with various variables defined via PARSELISTENV

*/Makefile*
- use PARSELISTENV instead of POPULATEENV, and add variables like DESTDIR
- other minor tweaks

*/list*
- replace @MACHINE@ with ${MACHINE}

convert to using the New Distrib World Order.
this directory can now be built UNPRIVED.

stop specifying cylinders per group

+ get mtree definition from bsd.sys.mk, for subtree make runs
+ change all disklabel and vnconfig instances to track libutil opendisk(3) mods

Add MTREE?= to add Makefiles and use when running mtree

Use symbol MTREECONF instead of MTREE to refer configuration file
to avoid conflicts. Pointed out by chs@netbsd.org.

Change all ocurrences of "crunchgen" to ${CRUNCHGEN}

Use
${MAKE}
instead of
make

branches: 1.8.4;
use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

increase ramdisk size

Sync with the recent crunchgen changes.
- Remove *.cro files and not the obsoleted *.lo files.

From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.

Import INSTALL.more a better way.

branches: 1.4.2;
Modify all calls to newfs in ramdisk/miniroot creation to include
the needed endianism of the architecture. One step towards cross-building
releases.

Not touched are newfs calls in install scripts as they run on the desired
machine and thus default correctly.

This is now the main install directory for the new integrated sysinst
boot. Yes, NetBSD/alpha finally gets sysinst on all media types.
The new boot makes a single ramdisk which is then divided via ustarfs
onto a two-floppy set, and a second unified image for CD's, HD's, or
tapes is also created.

distclean is a synonym for cleandir

Add support for building an "install kernel", which contains a ramdisk
in its belly. This differs from the floppy kernel in that it uses the
sysinst installation tool (and thus requires more space; the ramdisk is
3M).

This is useful for netbooting and installing or for placing on a CD-ROM.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.2.26;
Spell removable with only two es. Inspired by jmc@openbsd.

Add support for building an "install kernel", which contains a ramdisk
in its belly. This differs from the floppy kernel in that it uses the
sysinst installation tool (and thus requires more space; the ramdisk is
3M).

This is useful for netbooting and installing or for placing on a CD-ROM.

Dead.

More pieces of new integrated alpha installer.

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

branches: 1.5.32;
netbsd.org->NetBSD.org

sweep of my licenses (userland files w/o only my copyright) for
consistency. (no functional changes)

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

after checking and setting DONEPROFILE, export it so that children of the
shell (e.g. programs and shells invoked via sysinst) don't try to run
sysinst again. Fixes PR#7805.

branches: 1.1.2;
Add support for building an "install kernel", which contains a ramdisk
in its belly. This differs from the floppy kernel in that it uses the
sysinst installation tool (and thus requires more space; the ramdisk is
3M).

This is useful for netbooting and installing or for placing on a CD-ROM.

Dead.

More pieces of new integrated alpha installer.

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.10.48; 1.10.50;
Remove kernfs and use dmesg(8) on alpha INSTALL kernel.

branches: 1.9.32; 1.9.42;
netbsd.org->NetBSD.org

sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

rename (revert) memory disk filename /dev/mdX -> /dev/mdXa

Fix root device name md0a -> md0

Don't start update.

branches: 1.3.4;
after checking and setting DONEPROFILE, export it so that children of the
shell (e.g. programs and shells invoked via sysinst) don't try to run
sysinst again. Fixes PR#7805.

term type, sun -> vt100

branches: 1.1.2;
Add support for building an "install kernel", which contains a ramdisk
in its belly. This differs from the floppy kernel in that it uses the
sysinst installation tool (and thus requires more space; the ramdisk is
3M).

This is useful for netbooting and installing or for placing on a CD-ROM.

s/displyed/displayed/

s/parition/partition/

remove references to disktab.{preinstall,shadow}

The ramdisk includes dmesg, so use it in preference to /kern/msgbuf

branches: 1.4.26;
s/this this/this/.

netbsd.org->NetBSD.org

migrate to /usr/sbin/installboot or ${INSTALLBOOT} as appropriate

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

Make gzip on some crunched install media support xz decompression
(just like our base version does).

branches: 1.45.22; 1.45.24;
Add raidctl

branches: 1.44.8; 1.44.20;
Update location of "less" source directory to the build of various
install medias.

Revert rev 1.42 which is not necessary after rev 1.41.

Add -lbz2 and -llzma so that this links again.

Fix pasto botch.

Fix indent.

Use src/distrib/utils/x_gzip in all install ramdisks/miniroots for now
since installation file systems might be flooded by -llzma.

branches: 1.38.4;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Of the arious list files 28 said
PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip
while 14 picked
PROG usr/bin/gzip usr/bin/gunzip usr/bin/gzcat

Make them all choose the former. No functional change.

Fix indent and sort some entries.

Also put bootxx_ffsv2 into installation ramdisk.

XXX: is it worth to put bootxx_lfs nowadays?

Remove gnu/usr.bin from SRCDIRS.
No necessary files there since we have got non-GPLed src/usr.bin/gzip.

Remove kernfs and use dmesg(8) on alpha INSTALL kernel.

branches: 1.26.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.24.12; 1.24.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

More crunchgen lists needing -lz now for new gzip.
Noticed by Markus W Kilbinger.

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

use 555 instead of 755 for script perms

branches: 1.20.2;
migrate to /usr/sbin/installboot or ${INSTALLBOOT} as appropriate

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

link mount_mfs to newfs

use ${DISTRIBDIR} instead of ${_SRC_TOP_}/distrib

- add specific special entry for sys/arch/${MACHINE}/stand/installboot
for ports that don't yet use the MI usr.sbin/installboot
- remove now-unnecessary srcdir for sys/arch/${MACHINE}/stand

parselist.awk
- improve comments
- provide a general purpose variable replacement; replace contents of ${FOO}
with ENVIRON["FOO"].
- deprecate @MACHINE@ and @MACHINE_ARCH@ in favour of using ${MACHINE}
and ${MACHINE_ARCH} instead
- add errx() function; like err(), but doesn't print the line number
- invoke this script with various variables defined via PARSELISTENV

*/Makefile*
- use PARSELISTENV instead of POPULATEENV, and add variables like DESTDIR
- other minor tweaks

*/list*
- replace @MACHINE@ with ${MACHINE}

convert to using the New Distrib World Order.
this directory can now be built UNPRIVED.

Need /etc/netconfig.

Remove update from the miniroot lists.

branches: 1.10.4;
Generate the /dist/obsolete_* files used by sysinst from the obsolete lists
in sets/lists/*. The sript sets/makeobsolete concatenates the mi and md
obsolete list files all or a specified set and dumps it in a file, in a
subdir specified on the command line (inspired from the maketar and makeflist
files).
Use this for all the sysinst-based installs.
Untested for non-i386, and the md obsolete list may be wrong or incomplete.
Each postmaster is supposed to check this on his port.

Fix listfiles to handle object directories. Patches supplied by
Izumi Tsutsui in PR misc/7628.

Import INSTALL.more a better way.

adjust for changes in alpha /usr/mdec files.

branches: 1.6.2;
+pax, +less, +swapctl, rm /etc/*pwd.db, synch with i386.
move the machine-dependent links and progs to separate lines, to purify
diffs with i386

Use MI versions of the dot.commonutils and dot.instutils helper
scripts for ramdisk-based script installer (even where commented out).

Fix bugs in the way the instkernel is compressed and in the prerequisite
names.

This is now the main install directory for the new integrated sysinst
boot. Yes, NetBSD/alpha finally gets sysinst on all media types.
The new boot makes a single ramdisk which is then divided via ustarfs
onto a two-floppy set, and a second unified image for CD's, HD's, or
tapes is also created.

Add tset(1).

Add support for building an "install kernel", which contains a ramdisk
in its belly. This differs from the floppy kernel in that it uses the
sysinst installation tool (and thus requires more space; the ramdisk is
3M).

This is useful for netbooting and installing or for placing on a CD-ROM.

convert to using the New Distrib World Order.
this directory can now be built UNPRIVED.

Generate the /dist/obsolete_* files used by sysinst from the obsolete lists
in sets/lists/*. The sript sets/makeobsolete concatenates the mi and md
obsolete list files all or a specified set and dumps it in a file, in a
subdir specified on the command line (inspired from the maketar and makeflist
files).
Use this for all the sysinst-based installs.
Untested for non-i386, and the md obsolete list may be wrong or incomplete.
Each postmaster is supposed to check this on his port.

Add support for building an "install kernel", which contains a ramdisk
in its belly. This differs from the floppy kernel in that it uses the
sysinst installation tool (and thus requires more space; the ramdisk is
3M).

This is useful for netbooting and installing or for placing on a CD-ROM.

convert to using the New Distrib World Order.
this directory can now be built UNPRIVED.

use x_ping for ping, remove reference to -lipsec.
(sorry if you have specific need for "real" ping)

Remove update from all ramdisks.

branches: 1.6.4;
-lbz2 -lipsec

+pax, +less, +swapctl, rm /etc/*pwd.db, synch with i386.
move the machine-dependent links and progs to separate lines, to purify
diffs with i386

Use pax instead of tar on the ramdisk bins.. create appropriate link for
tar to get tar-like fonctionality.

This is now the main install directory for the new integrated sysinst
boot. Yes, NetBSD/alpha finally gets sysinst on all media types.
The new boot makes a single ramdisk which is then divided via ustarfs
onto a two-floppy set, and a second unified image for CD's, HD's, or
tapes is also created.

Add tset(1).

Add support for building an "install kernel", which contains a ramdisk
in its belly. This differs from the floppy kernel in that it uses the
sysinst installation tool (and thus requires more space; the ramdisk is
3M).

This is useful for netbooting and installing or for placing on a CD-ROM.

s/displyed/displayed/

fix various typos in comments and messages.

branches: 1.3.32;
netbsd.org->NetBSD.org

migrate to /usr/sbin/installboot or ${INSTALLBOOT} as appropriate

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}