branches: 1.6.12;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.5.10;
Last remaining bits of hand built releases. Get all TOS utils into CVS and
provide rules for putting them into installation/misc along w. checksums.

branches: 1.4.6;
yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

Build the floppies too.

No longer used (now using the miniroot installation).

branches: 1.1.1;
Initial revision

No longer used (now using the miniroot installation).

merge in changes from 1.1 release branch

branches: 1.1.1;
Initial revision

No longer used (now using the miniroot installation).

branches: 1.1.1;
Initial revision

No longer used (now using the miniroot installation).

branches: 1.1.1;
Initial revision

branches: 1.1.2; 1.1.14;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

Consistently use ${RELEASEDIR}/${RELEASEMACHINE} instead of
${RELEASEDIR}/${MACHINE} (Paul Ripke)

Now that we do not force debug sets off install CDs any more, explicitly
set CDRELEASE_NODEBUG everywhere.

branches: 1.1.2; 1.1.14; 1.1.80; 1.1.82;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.2.34;
yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

branches: 1.1.1;
Initial revision

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

branches: 1.1.1;
Initial revision

Try to shrink floppy images a bit

branches: 1.12.12;
More fat trimming defines and we managed to feat in our tight jeans.

branches: 1.11.16;
Use local MTREECONF to omit unnecessary dirs.

Specify -DNDEBUG to remove assert(3) macro. Shaves instbin ~40 bytes.

Use "-Os -m68020-60" for DBG. It seems to generate smaller objects than -Os.

gcc48 with "-Os":
-rwxr-xr-x 1 tsutsui wheel 1319596 Nov 16 20:50 obj.atari/instbin

gcc48 with "-Os -m68020-60"
-rwxr-xr-x 1 tsutsui wheel 1314516 Nov 16 20:49 obj.atari/instbin

This allows ever growing sysinst.fs still fit into 1440KB even with gcc48.
Acually we need a real solution (ustarfs based floppies etc.) soon
but we can work around at least for NetBSD 7.0.

Should be pulled up to netbsd-7 (if NetBSD/m68k 7.0 will switch to gcc48).

branches: 1.8.26;
- explicitly specify -Os via DBG for libhack build
- set WARNS=1 for sanity

Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.6.26; 1.6.30;
Add French, German and Polish sysinstmsgs to all ramdisks that include sysinst
expect those where at least one of the language variants isn't built,
and those that are known not to have enough space (i386 ramdisk-tiny).
Files added to list.sysinst, list.sysinst.en is used when these files
cannot be added.
This might hit a size limit on another build - but I have no (sane) way of
testing it.

branches: 1.5.2;
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

Use release:: instead of release: when multiple release targets may exist

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

branches: 1.1.1;
Initial revision

Fix yet another "[: SMALL test, no fallback usage" error on installation.

The same problem as PR/54835 of the miniroot scripts, i.e.
avoid and replace use of -o binary primary marked obsolescent
by POSIX.1-2017:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/test.html#tag_20_12
8_16

Noticed on installation of NetBSD 9.3 on TT030, and
maybe should be pulled up to netbsd-9.

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.7.4; 1.7.6;
Use kernfs to detect root file system device, instead of fat sysctl(8).

Should fix sysinst.fs overflow that prevents daily build.
Discussed on port-atari@:
http://mail-index.netbsd.org/port-atari/2017/11/thread1.html#000558
and whole installation is briefly tested on TT030.

Avoid use of expr(1).

It was removed from src/distrib/atari/floppies/install/list since rev 1.19
and the install script complains expr is not found.

Should be pulled up to netbsd-8.

branches: 1.5.8;
Remove redundant mount_gemdos script and put an alias instead.

Simply use "mount -u" to (re)mount root file system read-write
rather than denoting it using temporary /tmp/.root_writable file,
because it will never be removed if root file system is on floppy.
Fixes PR port-atari/37470.

Should be pulled up to netbsd-6.

branches: 1.3.8; 1.3.10;
Fix atari sysinst based miniroot image, and retire old (unreferenced)
miniroot.

branches: 1.2.16; 1.2.26; 1.2.32; 1.2.40;
netbsd.org->NetBSD.org

branches: 1.1.1;
Initial revision

Adapt to libterminfo as part of libhack-curses

Use the non-WIDE_CHAR libcurses version from libhack

branches: 1.12.12;
more gnu directory removal.

branches: 1.11.2; 1.11.4;
Remove redundant mount_gemdos script and put an alias instead.

Disable "OS bootversion check" on crunched binaries for installation media.

This oscheck() function seems implemented to check compatibility
between bootloaders and /netbsd kernel, but checking /netbsd using kvm(3)
doesn't make sense on installation or even future cross builds, and
probably we will never bump bootloader version without compatibility
per recent 14 years history.

This works around overflow of 1440KB 2HD sysinst.fs, and would also be
worth to pullup to netbsd-7.

branches: 1.9.26;
Remove unnecessary LIBS (-ledit, -lbz2, -lcrypt) for SMALL binaries
with libhack.

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

support gemdos as a type of unmounted filesystem during set selection

branches: 1.4.2;
Add -lprop, as ifconfig now needs it.

branches: 1.3.32; 1.3.34; 1.3.36;
Since crunchgen now picks up the new gzip from usr.bin/gzip, we now need -lz.

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

branches: 1.1.1;
Initial revision

Remove redundant mount_gemdos script and put an alias instead.

branches: 1.1.2;
support gemdos as a type of unmounted filesystem during set selection

Use kernfs to detect root file system device, instead of fat sysctl(8).

Should fix sysinst.fs overflow that prevents daily build.
Discussed on port-atari@:
http://mail-index.netbsd.org/port-atari/2017/11/thread1.html#000558
and whole installation is briefly tested on TT030.

Use local MTREECONF to omit unnecessary dirs.

branches: 1.1.1;
Initial revision

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

branches: 1.1.1;
Initial revision

Try to shrink floppy images a bit

branches: 1.8.4;
Drop IEEE 802.11 support from ifconfig(8).

Reduce ~9KB, and atari builds again for me.

Use the non-WIDE_CHAR libcurses version from libhack

branches: 1.6.14;
Workaround unexpected/undocumented behaviors of makefs(8).

remove unused flags

kill sed so we fit on one floppy again.

double the size of the image to fix the build

branches: 1.2.34;
yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

branches: 1.1.1;
Initial revision

For atari install disk:

- Drop FD support from installboot(8). Reduce ~0.5KB.
- Drop primary boot loaders for FD (2 files, 0.5KB each).

Note that we continue to support these features in base.

OK tsutsui@

Provide wdboot as a link of sdboot for Milan also in sysinst.

See the following commit log for details:
https://mail-index.netbsd.org/source-changes/2018/03/04/msg092779.html

branches: 1.22.6;
Use kernfs to detect root file system device, instead of fat sysctl(8).

Should fix sysinst.fs overflow that prevents daily build.
Discussed on port-atari@:
http://mail-index.netbsd.org/port-atari/2017/11/thread1.html#000558
and whole installation is briefly tested on TT030.

Put back /bin/cp and /sbin/sysctl to installation binaries.

- cp(1) is explicitly required by sysinst(8), cp_to_target() in
src/usr.sbin/sysinst/target.c, to copy bootloader to targetroot
- sysctl(8) is required by src/distrib/atari/floppies/common/dot.profile
to detect the root device (fd or md)

This might cause floppy overflow on HEAD again, but works on 8.0_BETA.

Should be pulled up to netbsd-8.

branches: 1.20.4;
Switch to x_fsck_ffs and x_newfs. Fix floppy image overflow.

branches: 1.19.2;
remove more stuff.

branches: 1.18.2;
put back sed, it fits again (and is needed)

kill sed so we fit on one floppy again.

Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Fix indent.

Use tiny limited distrib/utils/x_gzip. (no bzip2 and compress support)

Add dd(1) to install ramdisk binaries to wipe out existing disklabel etc.
Per request from David Ross on port-atari.

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Fix indent.

branches: 1.10.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add df(1) to installation md_root files for atari.

It looks df(1) had been required by MAKEDEV(8) since NetBSD 1.6 days,
and this could workaround PR port-atari/40316 in branches with
minimum pullups.

Fix atari sysinst based miniroot image, and retire old (unreferenced)
miniroot.

branches: 1.7.12; 1.7.20;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

branches: 1.6.16; 1.6.20;
Adapt to the new layout of files under /usr/mdec, so that this
builds again. However, the install program most probably needs
adaptation for this to work as intended.

Remove "srcdir distrib/utils/x_mount" from ramdisk lists
since src/sbin/mount/Makefile no longer links fs specific routines.

Now that usr.bin/ftp/Makefile supports SMALLPROG and SMALLPROG_INET6,
we don't need distrib/utils/x_ftp anymore...

Make sure that we are using the Atari version of installboot!

branches: 1.2.2;
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

branches: 1.1.1;
Initial revision

Bump image size to 1440k

branches: 1.3.20; 1.3.100;
Add usr/bin/sort and install.sub to prepare.fs.
Should fix PR port-atari/33455 by Alan Hourihane.

branches: 1.2.8;
yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

branches: 1.1.1;
Initial revision

adjust miniroot scripts to deal with the time prefix in dmesg

modernize, and avoid -a -o

branches: 1.4.4;
Also use kernfs to get rootdev and disk devices for "prepare" part.

Completely untested for many years..

Fix atari sysinst based miniroot image, and retire old (unreferenced)
miniroot.

branches: 1.2.4;
Convert TNF licenses to new 2 clause variant

branches: 1.1.1;
Initial revision

s/succes/success/ in comments.

fix various typos, mainly s/trasfering/transferring/ and s/theese/these/.

Kill expr, modernize

branches: 1.2.46;
Convert TNF licenses to new 2 clause variant

branches: 1.1.1;
Initial revision

Also use kernfs to get rootdev and disk devices for "prepare" part.

Completely untested for many years..

remove more stuff.

branches: 1.10.30;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Relegate edlabel to use in extremely memory constrained install
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change

Use tiny limited distrib/utils/x_gzip. (no bzip2 and compress support)

Add dd(1) to install ramdisk binaries to wipe out existing disklabel etc.
Per request from David Ross on port-atari.

Add df(1) to installation md_root files for atari.

It looks df(1) had been required by MAKEDEV(8) since NetBSD 1.6 days,
and this could workaround PR port-atari/40316 in branches with
minimum pullups.

Fix atari sysinst based miniroot image, and retire old (unreferenced)
miniroot.

branches: 1.4.4; 1.4.14; 1.4.20; 1.4.28;
Add usr/bin/sort and install.sub to prepare.fs.
Should fix PR port-atari/33455 by Alan Hourihane.

branches: 1.3.6;
Remove "srcdir distrib/utils/x_mount" from ramdisk lists
since src/sbin/mount/Makefile no longer links fs specific routines.

Rename install.sh to install. This is what the profile expects. Noted by
Julian Coleman.

branches: 1.1.2;
This got lost somewhere.

branches: 1.1.1.1.32;
tos binary utilities

branches: 1.1.1.1.32;
tos binary utilities

branches: 1.1.1.1.32;
tos binary utilities

Consistently use gzip with the -n flag so dates are not embedded.

Not tested on all platforms.

branches: 1.1.1;
Initial revision

branches: 1.1.1.1.32;
tos binary utilities

branches: 1.1.1.1.32;
tos binary utilities

branches: 1.1.1.1.32;
tos binary utilities

branches: 1.1.1.1.32;
tos binary utilities

Revert Makefile changes.

put distrib Makefile last

branches: 1.2.18; 1.2.24;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.1.4; 1.1.28; 1.1.32;
Last remaining bits of hand built releases. Get all TOS utils into CVS and
provide rules for putting them into installation/misc along w. checksums.

branches: 1.1.4; 1.1.28;
Last remaining bits of hand built releases. Get all TOS utils into CVS and
provide rules for putting them into installation/misc along w. checksums.

branches: 1.1.4; 1.1.28;
Last remaining bits of hand built releases. Get all TOS utils into CVS and
provide rules for putting them into installation/misc along w. checksums.

branches: 1.1.4; 1.1.28;
Last remaining bits of hand built releases. Get all TOS utils into CVS and
provide rules for putting them into installation/misc along w. checksums.

branches: 1.1.4; 1.1.28;
Last remaining bits of hand built releases. Get all TOS utils into CVS and
provide rules for putting them into installation/misc along w. checksums.

branches: 1.1.4; 1.1.28;
Last remaining bits of hand built releases. Get all TOS utils into CVS and
provide rules for putting them into installation/misc along w. checksums.

branches: 1.1.4; 1.1.28;
Last remaining bits of hand built releases. Get all TOS utils into CVS and
provide rules for putting them into installation/misc along w. checksums.