Add new file-system spec.in for KERNEL_DIR=yes

Use FFSv2 for amd64 live-image and install-image via new $IMGFFSVERSION.

Fixes PR/59007.

FAT (for ESP) is always LE so "-B endian" for makefs(8) is not necessary.

(not sure if there is any "EFI on big endian CPU" system though)

Remove "(untested)" comment from INSTALLBOOT_AFTER_DISKLABEL.

Also note vax requires it.

Do not include tests in boot images if MKATF=no

branches: 1.41.2;
Now that we label GPT partitions, adjust the generated fdisk to match.

Short the root wedge name to NBImgRoot (to get NAME=NBImgRoot below 16 chars

Previous did not work out well - ${INSTIMGBASE} was not always set here
and spaces in the label name confuse the (over simplistic) xen command
line parser. Use (fixed) "NetBSD_ImageRoot" instead for the root partition.

Try to give the root partition a usable (but unique enough) name
if we use GPT. This helps when booting without a bootloader (e.g. in
qemu) and passing boot arguments to identify the root partition.

include all extra flavors of the kernel and use the proper variable for
the machine dependent installation directory.

Apply the -xx treatment to the rest of the ffs makefs invocations.

Move MIPS N64 compat out of {base,debug}32 into {base,debug}64

martin requested separation by ABI and it doesn't make much sense
to have 64-bit binaries in a set called 32.

Add new sets: base32, debug32, manhtml

- base32 contains (when MKCOMPAT=yes) shared libraries for 32-bit
compatibility, previously included in base

- debug32 contains (when MKCOMPAT=yes) debug symbols and static libraries
containing debug symbols for 32-bit compatiblity, previously included
in debug

- manhtml contains (when MKHTML=yes) the HTML files previously included
in 'man', which are of limited utility without third-party software.

The motivation for this change is to be able to easily exclude sets
from CD-ROM images that go over the size limit without xz compression
(which many NetBSD platforms struggle to extract at acceptable speeds).

PR/57910: Jan-Benedict Glaw: Fix typo preventing reproducible builds

Use defined ${GPTSECTORS} rather than hardcoded 2048.

Document USE_GPTMBR and GPTSECTORS.

branches: 1.30.2;
allow some invocations of expr(1) to "fail" - expr(1) returns "1" is
the expression expands to "0" or empty, and sometimes these values end
up correctly being 0.

Move DRM-driver firmware from base to its own set, gpufw

This set is only installed on amd64,i386,evbarm.
This set is installed on minimal installs and on install media, in
case someone needs it for basic driver functionality.

Comments:
Switched to a single MK tunable for it - that is probably unneeded.

An upcoming DRM update will include even fatter firmware, and we'd
like to minimize the impact of it.

bootimage: allow appending additional rc.conf options

If RC_CONF_EXTRA is defined, append the contents of this file to the
target file-system's rc.conf

Check and remove a stale work file for UEFI images with incorrect size.

Fixes PR/56132 (build.sh target install-image fails in update-mode).

branches: 1.26.4;
Add support for EC2 and resize root to AMD64 live images.

Only install gptmbr.bin if USE_GPTMBR=yes

Add "live-image with a FAT partition for bootstrap files" support.

See PR/55075 for more details.

Merge amd64's UEFI logic back into the generic bootimage handling.

Split out /rescue to its own set and adapt installers/images to add it.

This is meant to make updates safer: if something goes wrong with updating
base, we still have the old, standalone /rescue to recover from.

branches: 1.21.2;
Reduce diffs between common and amd64 uefi Makefile.bootimage files.

No functional change.

Use the special device name "ROOT." in /etc/fstab not just on the arm
images, but also on the bootable disk images of other ports, so that
they can be booted from differently named devices. Merge the i386 and
amd64 -live-sd0root and -live-wd0root images into a single live image
per port, bootable both from usb media and in qemu. Drop the -xx0root
suffixes from image names as they are no longer meaningful.

Make building boot images work with xz sets on non-NetBSD hosts.

NetBSD gzip is not toolified so we can't assume the host gzip will be able
to decompress xz files. Use the toolified xz instead in the USE_XZ_SETS case.

Support .tar.xz sets

branches: 1.17.10; 1.17.12;
Remove leftover "-f" from when this used to be a cp command.

Unbreak the build for install-image target.

remove extra endif

more MKREPRO_TIMESTAMP fixes (for pax/tar generated files)

Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

use the same logic to compute the timestamp like the other files

branches: 1.12.2; 1.12.4;
PR/50360: Thomas Klausner: if MKREPRO is set, provide a consistent timestamp
for the files in the cdroms to be built. For now we copy the timestamp of
<sys/param.h>. We could set an absolute timestamp too like -T 0 for the epoch.

Fix ytpo: INSTALLBOOTOPTIONS, not INSTALLBOOTOPTOINS.

From qjsgkem on Freenode.

unbreak amd64 install images by passing ipty to MAKEDEV. revision 1.21
of etc/etc.amd64/MAKEDEV.conf removed them from 'all'. (hi christos!)

branches: 1.9.2;
Use ${TOOL_GZIP_N} instead of ${TOOL_GZIP} -n, and similarly
use ${TOOL_GZIP_N} -9 instead of ${TOOL_GZIP} -9n, etc.

This will pass -nT instead of just -n if the gzip program is
actually pigz.

branches: 1.8.2;
Pass the -n flag to gzip invocations.

This prevents it from embedding a timestamp in the output. We pass
"-n" unconditionally, not conditional on MKREPRO, because many other
invocations of gzip already passed the -n flag unconditionally.

eliminate use of bsd.sys.mk from Makefiles

branches: 1.6.2;
Fix typo in comments.

Add two optional variables for liveimage/installimage builds:
---
MBR_BOOTCODE
optional MBR bootcode which should be installed by fdisk(8)
(default: empty)
- specified MBR_BOOTCODE must exist in ${DESTDIR}/usr/mdec
- if MBR_BOOTCODE is not specified,
MBR_DEFAULT_BOOTCODE (default: mbr) will be used
if the target ${MACHINE} has the one in /usr/mdec

INSTALLBOOTOPTIONS
options passed to installboot(8), e.g., -o console=com0
(default: empty)
---
Proposed by Brook Milligan on current-users@:
http://mail-index.NetBSD.org/current-users/2012/04/16/msg019892.html

Also make USE_MBR work on ${MACHINE}s which don't have the default
/usr/mdec/mbr bootcode. (no such port has the liveimage target yet though)

XXX: tools fdisk(8) implicitly uses host's /usr/mdec/mbr for the default
XXX: bootcode even for non-x86 targets if host is x86

branches: 1.4.2;
s/Createing/Creating/

branches: 1.3.2;
Appease warnings `"expr 0 \* 1024 \* 1024 / 512" returned non-zero status.'

SWAPMB could be zero (in install-image case) and
expr(1) returns exit status 1 in that case. Umm.

Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

remove redundant kernels and floppies from the space-starved i386 ISO

branches: 1.10.2;
Restore MKNOUVEAUFIRMWARE and MKRADEONFIRMWARE and make gpufw set unconditional

Simplifies logic.
Restoring MK* requested by mrg on tech-kern discussion
https://mail-index.netbsd.org/tech-kern/2021/09/25/msg027695.html

Move DRM-driver firmware from base to its own set, gpufw

This set is only installed on amd64,i386,evbarm.
This set is installed on minimal installs and on install media, in
case someone needs it for basic driver functionality.

Comments:
Switched to a single MK tunable for it - that is probably unneeded.

An upcoming DRM update will include even fatter firmware, and we'd
like to minimize the impact of it.

Shrink the evbarm install image by not including the live images on the install media

Default USE_MBR to no

Merge amd64's UEFI logic back into the generic bootimage handling.

branches: 1.5.12; 1.5.14;
Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

branches: 1.4.14; 1.4.18;
Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.3.2;
Fix typo in comments.

branches: 1.2.4;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

branches: 1.3.14; 1.3.18;
Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.2.4; 1.2.8;
Fix checks for RELEASEDIR (and xxxxIMGBASE) variables to perform it
only on live_image or install_image targets. PR toolchain/45864

Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

branches: 1.1.4;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

branches: 1.1.4;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

branches: 1.1.2; 1.1.4;
Add "live-image with a FAT partition for bootstrap files" support.

See PR/55075 for more details.

branches: 1.1.4;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

branches: 1.1.4;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Make sure to mount /var/shm

Programs such as firefox seem to require it,
and this file is used by the live image as well.

branches: 1.3.10;
Use the special device name "ROOT." in /etc/fstab not just on the arm
images, but also on the bootable disk images of other ports, so that
they can be booted from differently named devices. Merge the i386 and
amd64 -live-sd0root and -live-wd0root images into a single live image
per port, bootable both from usb media and in qemu. Drop the -xx0root
suffixes from image names as they are no longer meaningful.

branches: 1.2.30; 1.2.32;
Don't enable WAPBL in images.

branches: 1.1.4; 1.1.8;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Use the special device name "ROOT." in /etc/fstab not just on the arm
images, but also on the bootable disk images of other ports, so that
they can be booted from differently named devices. Merge the i386 and
amd64 -live-sd0root and -live-wd0root images into a single live image
per port, bootable both from usb media and in qemu. Drop the -xx0root
suffixes from image names as they are no longer meaningful.

branches: 1.2.30; 1.2.32;
Don't enable WAPBL in images.

branches: 1.1.4; 1.1.8;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

branches: 1.1.4;
Add new file-system spec.in for KERNEL_DIR=yes

Add new file-system spec.in for KERNEL_DIR=yes

branches: 1.1.4; 1.1.56;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.