Fix MKREPRO build (Jan-Benedict Glaw)

Correctly support aarch64eb and earmv7hfeb in a similar manner to
their little-endian counterparts.

Fix build failures for periodic binary snapshots.

Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)

- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)

branches: 1.18.2;
Create the ramdisk destination dir here.

Copy install ramdisk to releasedir. Provide both a raw ffs and
Legacy U-Boot version of it.

branches: 1.16.4;
Fix build with LLVM, which does not support -mthumb-interwork.

+= for MAKEFS_FLAGS

branches: 1.14.2; 1.14.4;
When building earmv7 ramdisks, compile with -mthumb -mthumb-interwork
to save space. Think of it as -Os on steriods.

Build BE ramdisks for BE MACHINE_ARCH's

branches: 1.12.6; 1.12.12;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Change ramdisks from dhclient to dhcpcd and add corresponding glue to
sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed,
60KB compressed.

branches: 1.5.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

branches: 1.4.12; 1.4.24;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Ramdisk/install kernel for evbarm. Currently support the Npwr
storage appliance.

XXX More work needs to be done here.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.2.26;
Spell removable with only two es. Inspired by jmc@openbsd.

Ramdisk/install kernel for evbarm. Currently support the Npwr
storage appliance.

XXX More work needs to be done here.

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

branches: 1.2.32;
netbsd.org->NetBSD.org

Ramdisk/install kernel for evbarm. Currently support the Npwr
storage appliance.

XXX More work needs to be done here.

Sync with amd64

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.2.32; 1.2.100; 1.2.102;
netbsd.org->NetBSD.org

Ramdisk/install kernel for evbarm. Currently support the Npwr
storage appliance.

XXX More work needs to be done here.

Include newfs_msdos

x_gzip need liblzma for xz support.

Add dkctl to evbarm ramdisk, so we can configure wedges.

Add drvctl

Add sysctl

Add newfs_ext2fs and mount_ext2fs, useful for installing on a hard
disk on KUROBOX_PRO.

branches: 1.23.2;
Add mount_tmpfs

Add fdisk/gpt/fsck_msdos

branches: 1.21.2;
Update location of "less" source directory to the build of various
install medias.

Remove unnecessary gnu/usr.bin path from SRCDIRS.

Use src/distrib/utils/x_gzip in all install ramdisks/miniroots for now
since installation file systems might be flooded by -llzma.

branches: 1.18.4;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Of the arious list files 28 said
PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip
while 14 picked
PROG usr/bin/gzip usr/bin/gunzip usr/bin/gzcat

Make them all choose the former. No functional change.

Fix indent on common/protocols changes.

Change ramdisks from dhclient to dhcpcd and add corresponding glue to
sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed,
60KB compressed.

branches: 1.8.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add 'xterm' and 'ansi' to termcap.mini (and the mktermcap script which is
used to generate it), use termcap.mini in evbarm ramdisk (vs. the full
termap DB) which frees up a bit of room to add dhclient and cu.

branches: 1.6.2;
Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.5.12; 1.5.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Add /bin/rmdir, needed by sysinst

More crunchgen lists needing -lz now for new gzip.
Noticed by Markus W Kilbinger.

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Ramdisk/install kernel for evbarm. Currently support the Npwr
storage appliance.

XXX More work needs to be done here.