+= for MAKEFS_FLAGS

branches: 1.33.2; 1.33.4;
Bump

Fix yet another "openpty() failed" error during sysinst.

Prepare a new entry for ramdisk that includes ipty target in
etc.hp300/MAKEDEV.conf and use it in distrib/hp300/ramdisk/Makefile.
See also PR/46812, PR/47123, and PR/47774.

We could simply add "ipty" to MAKEDEVTARGETS as miniroot/Makefile does,
but it's better to shrink ramdisk size as much as possible.

Should be pulled up to both netbsd-6 and netbsd-6-0.

Remove non-en translations. en is enough for poor Tier II ports.

branches: 1.30.6; 1.30.8; 1.30.12; 1.30.14;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

Replace references to local and now no-longer-existing termcap files
with references to ${DISTRIBB}/common/termcap. Hi, abs@!

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Bump ramdisk size from 1.5M to 1.6M to compensate for recent bloat.

branches: 1.24.12; 1.24.14; 1.24.16;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Bump ramdisk image size from 1444k to 1500k.

ramdisk image overflew, bump by 4K

More inodes for ramdisk

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Make all devices, bump ramdisk size, and fiddle with inode density.

alpha sort some entries

distrib/** consistency tweaks

Set DBG=-Os for libhack.

ensure all sysinst-using makefs generated images have at least 15 inodes free,
and be consistent how MAKEFS_FLAGS is defined.

- Be consistent how libhack is used: If extra HACKOBJS (e.g., gethost.o) are
required, define them before pulling in libhack/Makefile.inc so that the
dependencies work correctly.
- Other minor cleanups

Disable libhack's gethost.o (replacement gethostby{name,addr}()) by default,
as they only support reading /etc/hosts, and its the "least useful" of
the libhack routines. Add gethost.o back to Really Small media which
appears to need the space savings.

remove duplicate IMAGEDEPENDS entry

cosmetic consistency tweak

add more IMAGEDEPENDS, and some more cosmetic tweaks

clarify why we avoid gethost.o from libhack

replace ${_SRC_TOP_}/distrib with ${DISTRIBDIR}

remove USE_SYSINST goop that was obviously copied from the i386 stuff
and unconditionally add the sysinst list to LISTS; the goop is only in
the i386 stuff because that has some ramdisks which don't use sysinst,
where here on the hp300 it's not an optional item :)

Trim the ramdisk down even smaller. Include the device files on
the ramdisk, since we don't have enough memory to dynamically build
/dev on mfs.

Make filesystem big endian.

List for ramdisk. Bump ramdisk size to 2MB.

Use the new ramdisk build infrastructure.

Skeleton for ramdisk-style installation media.

Don't need this now.

Skeleton for ramdisk-style installation media.

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.6.46; 1.6.48;
Switch NetBSD/hp300 to wscons with rasops. Simply ported from OpenBSD/hp300.

- Only A1416 Kathmandu (topcat) framebuffer on 425t is tested, but
all other variants (TigerShark, Hyperion, DaVinci, GatorBox, Renaissance)
should also work if they are working on OpenBSD/hp300.
- sti(4) and SGC bus support are not pulled because I don't have 425e
and I can't confirm that 362 and 382 actually have SGC bus.
(I'll commit a DIO based dumb driver for 362 and 382 framebuffers later)
- Xorg server with wsfb driver will also be integrated soon
once after keycode with NoSymbol problem is addressed.
(We have to re-think what code should be used on WSDISPLAY_COMPAT_RAWKBD)
- MI HIL keyboard and mouse drivers are working fine though
cngetc via hilkbd has some problem (still we can input commands).
- No old HP-UX like HIL ioctl compatibility (we removed COMPAT_HPUX anyway).
grfinfo(8) and hilinfo(8) will be removed shortly.

Demonstrated on NetBSD booth at Open Source Conference 2011 Kagawa.

branches: 1.5.20; 1.5.40;
Use dmesg(8) directly rather than via kernfs.

netbsd.org->NetBSD.org

Add tset to ramdisk. Use it to set TERM before running sysinst.

Don't use tset, since it's not on the ramdisk. Might have to rethink
this for serial consoles.

Use the new ramdisk build infrastructure.

Use more shrinked binaries from distrib/utils/x_foo versions.

Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Fix indent on common/protocols changes.

branches: 1.18.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.16.12; 1.16.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Use dmesg(8) directly rather than via kernfs.

Use smaller distrib/utils/x_gzip.

MAKEDEV(8) requires df(1) to detect fdesc.

hp300 now uses MI installboot(8) so also put it to ramdiskbin.

Add -lz, now needed by gzip.

Remove "srcdir distrib/utils/x_mount" from ramdisk lists
since src/sbin/mount/Makefile no longer links fs specific routines.

Now that usr.bin/ftp/Makefile supports SMALLPROG and SMALLPROG_INET6,
we don't need distrib/utils/x_ftp anymore...

typo: PROC -> PROG

Add tset to ramdisk. Use it to set TERM before running sysinst.

As parselist.awk now sets COPY-ied files explicitly to 444, ensure
executable files are 555.

branches: 1.5.2;
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

consistency cleanup

- add specific special entry for sys/arch/${MACHINE}/stand/installboot
for ports that don't yet use the MI usr.sbin/installboot
- remove now-unnecessary srcdir for sys/arch/${MACHINE}/stand

Trim the ramdisk down even smaller. Include the device files on
the ramdisk, since we don't have enough memory to dynamically build
/dev on mfs.

List for ramdisk. Bump ramdisk size to 2MB.

Use the new ramdisk build infrastructure.

Skeleton for ramdisk-style installation media.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

- add xterm entry since dot.profile has an option to use it
- update vt100 entry

branches: 1.1.34; 1.1.42;
Use the new ramdisk build infrastructure.