all: fix "Invalid internal option" warning from make

Invoke ${MAKESUMS} for ${RELEASEDIR}/${RELEASEMACHINEDIR}/installation files
as snap_md_post target in etc/etc.${MACHINE}/Makefile.inc rather than
as release target in distrib/${MACHINE}/Makefile so that builds for
release in distrib/${MACHINE}/Makefile don't have to be serialized.

XXX: maybe ramdisk kernels should be installed into binary/kernel dir
XXX: as other ports rather than installation dir, and
XXX: kernel config names should be preserved in their filenames.

Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.7.2;
Build install kernels and standalone bootloaders in their own directories
so that parallel build works properly.

branches: 1.6.12; 1.6.14;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.5.16;
Convert to usage of UUDECODE_FILES and standardize on filename extension

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

build kernel with ramdisk attached. PR 16979

branches: 1.1.2;
add hpcsh

branches: 1.1.2; 1.1.14;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

Consistently use ${RELEASEDIR}/${RELEASEMACHINE} instead of
${RELEASEDIR}/${MACHINE} (Paul Ripke)

Now that we do not force debug sets off install CDs any more, explicitly
set CDRELEASE_NODEBUG everywhere.

branches: 1.1.2; 1.1.14; 1.1.80; 1.1.82;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.1.4; 1.1.6; 1.1.8; 1.1.10;
Build install kernels and standalone bootloaders in their own directories
so that parallel build works properly.

+= for MAKEFS_FLAGS

branches: 1.8.14; 1.8.18;
Fix PR install/47123 (sysinst fails with "openpty() failed" on many ports):
Add "ipty" to MAKEDEVTARGETS in miniroot/Makefile.inc since "MAKEDEV all"
no longer creates /dev/pty* device nodes and miniroot doesn't mount ptyfs.

branches: 1.7.6; 1.7.8; 1.7.12; 1.7.14;
Enable dhcpcd(8) in hpcsh sysinst.

Add sysinst(8) for hpcsh.
Mostly taken from hpcsmips, but no non-English translations.

Tested on HPW-50PA.

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.1.32;
build kernel with ramdisk attached. PR 16979

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.4.48; 1.4.50;
Add sysinst(8) for hpcsh.
Mostly taken from hpcsmips, but no non-English translations.

Tested on HPW-50PA.

Remove mount_kernfs(8) and use dmesg(8) directly.

branches: 1.2.32;
netbsd.org->NetBSD.org

build kernel with ramdisk attached. PR 16979

sysctl(8) is useful to have in the install env when debugging

branches: 1.10.4; 1.10.18; 1.10.26; 1.10.28;
nvi has moved.

branches: 1.9.6; 1.9.12;
Add sysinst(8) for hpcsh.
Mostly taken from hpcsmips, but no non-English translations.

Tested on HPW-50PA.

Remove mount_kernfs(8) and use dmesg(8) directly.

Remove fsck_ext2fs(8) and mount_ext2fs(8).
(no file-system EXT2FS in kernels)
Add fsck_msdos(8) and newfs_msdos(8) instead for bootstrap from WinCE.

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

usr.bin/vi/build -> usr.bin/nvi/build

branches: 1.1.32;
build kernel with ramdisk attached. PR 16979

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

branches: 1.1.32;
build kernel with ramdisk attached. PR 16979

Revert Makefile changes.

include distrib Makefile last

branches: 1.2.2; 1.2.4; 1.2.22; 1.2.28;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.1.2; 1.1.4; 1.1.6;
Build install kernels and standalone bootloaders in their own directories
so that parallel build works properly.