Reinstate INSTALL kernel for embedded ramdisk installs.

Reasons being:
- INSTALL is GENERIC with an embedded ramdisk, and as such, can benefit from
features included within.
- INSTALL_FLOPPY has its own config(5) file, and is tailored for "small"
floppy images; it misses features/drivers that could be needed to boot
in a decent environment for recent x86 machines (like ACPI)
- makes it closer to floppies distrib available for amd64

While here, comment out INSTALL_FLOPPY and bootfloppy-big image build. NetBSD
does not use the 3.6MiB image for El Torito cdroms anymore.

Remove the FLOPPYMAX limit; i386 needs 4 floppies now. Modify boot.cfg and
release/contents to reflect reality.

See http://mail-index.netbsd.org/port-i386/2011/02/08/msg002307.html

No comments, no objections.

branches: 1.37.14;
remove duplicate entry for bootfloppy-big

branches: 1.36.8; 1.36.12;
Remove GENERIC_LAPTOP and INSTALL_LAPTOP. To compensate, switch
bootfloppy-big to actually use INSTALL_LARGE (with ACPI) and 5 floppies.

branches: 1.35.8;
As has been pointed out recently, the list of i386 release kernels needs
updating. Probably to an ACPI kernel that need not fit into an 'emulated floppy'
and a 'legacy' kernel that will fit.
In any case the small/tiny kernels which are really for i386 systems with
< 16MB of memory (some are sized for a 5.25" floppy) don't need to be built.
Remove bootfloppy-small, bootfloppy-tiny, rescue-tiny and bootfloppy-ps2
and associated ramdisks.

Prepare creation of boot CDs:

* Move files in distrib/i386:

floppies/instkernel/Makefile -> instkernel/Makefile
floppies/ramdisk-big/Makefile -> ramdisks/ramdisk-big/Makefile
floppies/ramdisk-big/disktab.preinstall -> ramdisks/ramdisk-big/disktab.preinstall
floppies/ramdisk-big/list -> ramdisks/ramdisk-big/list
floppies/ramdisk-big/list.inet6 -> ramdisks/ramdisk-big/list.inet6
floppies/ramdisk-rescuetiny/Makefile -> ramdisks/ramdisk-rescuetiny/Makefile
floppies/ramdisk-rescuetiny/list -> ramdisks/ramdisk-rescuetiny/list
floppies/ramdisk-small/Makefile -> ramdisks/ramdisk-small/Makefile
floppies/ramdisk-small/list -> ramdisks/ramdisk-small/list
floppies/ramdisk-tiny/Makefile -> ramdisks/ramdisk-tiny/Makefile
floppies/ramdisk-tiny/list -> ramdisks/ramdisk-tiny/list
floppies/common/Makefile.ramdisk -> ramdisks/common/Makefile.ramdisk
floppies/common/dot.profile -> ramdisks/common/dot.profile
floppies/common/list.ramdisk -> ramdisks/common/list.ramdisk
floppies/common/termcap.mini -> ramdisks/common/termcap.mini

* Adjust paths

Restructure this Makefile to make it easier to comment out subdirectories.

Add bootfloppy-laptop-big, which creates bootlap-big.fs, which is a 2.88MB
version of bootlap[12].fs.
This is suitable for using as a boot file for an El Torito CD-ROM image
to be used to boot laptops, as it has the INSTALL_LAPTOP kernel
(instead of the INSTALL kernel that bootbig.fs has).

As both boot-small and rescue-small have expanded onto a second 1.2MB
floppy (and there's not the same RAM contraints that *-tiny has),
fold rescue-small into boot-small and deprecate the former.
The "all in one" boot-small is only 100KB larger on the second floppy.

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Turn back on all floppies. They all build once again with both new and old
toolchains

1. delete all instances of /dev/{r,}vnd0d. Use vnconfig vnd0 and disklabel
vnd0 and let opendisk(3) DTRT.
2. resize some of the images since we've gotten an average of 5K more
with the new toolchain.
3. comment out the rescue disks, since they don't fit anymore.

Now the whole directory compiles and works with the in-tree toolchain,
but does not work still with USETOOLS.

GCC 2.95 generates significantly larger code with -O2 than our old compiler did; thus we overflow the floppies. I thought we used to explicitly set -Os in here; anyway, with this change, we do now!

Add PS/2 bootfloppy, to be used for installation on IBM PS/2 machines.

Re-enable all floppies. All of them now build.

rescue-small is currently borked, too.

Who'd've guessed? The -tiny floppies don't build any more.

Rearrange bootfloppies. The idea is that "rescue" tools go on the
floppies as long as they fit, but they are the first to be sacrificed
if space is short, and get moved to a seperate rescue floppy.

This means that the default fdset and the 2.88M image have them,
but others (the "small" and "tiny" floppies) do not.

Sysinst is also back on the "tiny" image, and tested to be working
within 4M.

branches: 1.19.2;
Oops, need to descend into ramdisk-tiny now too.

Fix the previous in another way:

o Wave goodbye to INSTALL_SMALL-based boot image (it was originally
built for 5.25" media, but isn't anymore).
o Make a separate ramdisk image for the INSTALL_TINY image,
using the old script-based installer (not fixed/checked at the moment).
However, at least tweak the profile scripts to start it instead of sysinst.
Also remove ping6 and rtsol from ramdisk compared to original; the
INSTALL_TINY image doesn't have INET6.
o Add dump/restore back into both ramdisk images.
o Add scsictl and chio to the normal ramdisk image (INSTALL-based fdset)
o With dump/restore reinstated, remove the rescue-* and ramdisk-rescue
directories.

So, we're now back to having the recovery tools on the same image as
the boot media images.

Add construction of three types of "rescue" images, based on the
boot images.

The difference compared to the boot images is that these do not contain
sysinst, but do on the other hand contain dump/rdump, restore/rrestore,
scsictl and chio in addition to the other stuff already on the install
floppies.

The images built are
rescue1.fs
rescue2.fs Based on the full INSTALL kernel, on two floppies
rescue-sm.fs Based on INSTALL_SMALL
rescue-ti.fs Based on INSTALL_TINY

Make it easier to comment out single targets/floppies.

Build bootfloppy-small, as a 1.44MB floppy image.

Build bootfloppy-tiny again.

Merge latest build system changes, and use the kernels built in ramdisk-kernel.

Build in ramdisk-kernel.

Disable building of bootfloppy-tiny for now since we don't fit.

Provide some more automation in the "make release" process. Also build
and install:
o INSTALL and INSTALL_TINY kernels (for boot floppy images)
o GENERIC_TINY kernel
o Boot floppy images
Ideas borrowed from etc/etc.sun3/ setup.

branches: 1.9.2; 1.9.6;
bootfloppy-big/Makefile creates 2.88M diskette image suitable for CD-ROM boot.
(Depends on new disktab from etc/etc.i386/.)
Don't descend into bootfloppy and bootfloppy-small since these now overflow,
now do ramdisk, fdset, bootfloppy-big, and bootfloppy-tiny.

Fixes to the install floppies
(from Havard.Eidnes@runit.sintef.no)

Change default bootfloppy to 1.44M, and add a 1.2M "small" bootfloppy.

branches: 1.6.2;
Initial commit of new single floppy install/upgrade system.

Merge separate kernel-copy floppies back into one. This is a stop-gap
measure; the next release will use something Different.
Update version number to 1.2C.

merge in 1.2 branch

branches: 1.3.2; 1.3.6;
This should now be OK for the 1.1 release.

only one kc now

branches: 1.1.1;
Initial revision

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

don't need REV and VER here anymore

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

branches: 1.12.2;
Make the path relative instead of using BSDSRCDIR

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Initial commit of new single floppy install/upgrade system.

Add missing REV changes from lukem:
>Don't hardcode in the current release information; generate it
>automatically on the fly, by using
> `sh ${BSDSRCDIR}/sys/conf/osrelease.sh -s`

Bump the REV to 12D to get in sync with param.h and newvers.sh.
This REALLY needs to be in ONE file and not in 11 files.

Merge separate kernel-copy floppies back into one. This is a stop-gap
measure; the next release will use something Different.
Update version number to 1.2C.

Bump to 1.2B. We really need to centralize this.

Bump revision number to 1.2A so that snapshots of -current will have
decent version numbers in them. This should really, really be in a
single file so in the future it only has to be changed in one place
for all distributions and documentation.

merge in 1.2 branch

branches: 1.3.2; 1.3.6;
This should now be OK for the 1.1 release.

Update revision number.

branches: 1.1.1;
Initial revision

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

merge in 1.2 branch

branches: 1.4.6;
update to match current reality. also, make a "COPYDIR" list entry
type, to copy a directory, and clean up "COPY" list entries.

Explicitly remove files before copying or linking.

branches: 1.2.2;
1 floppy drive support

branches: 1.1.1;
Initial revision

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

merge in 1.2 branch

branches: 1.1.1;
Initial revision

Reinstate INSTALL kernel for embedded ramdisk installs.

Reasons being:
- INSTALL is GENERIC with an embedded ramdisk, and as such, can benefit from
features included within.
- INSTALL_FLOPPY has its own config(5) file, and is tailored for "small"
floppy images; it misses features/drivers that could be needed to boot
in a decent environment for recent x86 machines (like ACPI)
- makes it closer to floppies distrib available for amd64

While here, comment out INSTALL_FLOPPY and bootfloppy-big image build. NetBSD
does not use the 3.6MiB image for El Torito cdroms anymore.

Remove the FLOPPYMAX limit; i386 needs 4 floppies now. Modify boot.cfg and
release/contents to reflect reality.

See http://mail-index.netbsd.org/port-i386/2011/02/08/msg002307.html

No comments, no objections.

branches: 1.12.16;
For PR kern/38537:

- Make MULTIPROCESSOR mandatory on i386.

Installation changes:

- Update installation section of release notes to match reality.
- Rename INSTALL to INSTALL_FLOPPY, retire INSTALL_LARGE.
- Build INSTALL kernel from GENERIC, like on amd64.
- Update boot menu to allow disabling ACPI and/or SMP.
- Remove GENERIC.NOACPI from the installed kernel list.
- TODO: install default boot.cfg in etc.tgz.
- TODO: possibly enable PCI fixup stuff at runtime if ACPI is disabled.

Build changes:

- No longer build ALL, it's for verification, is slow to build and the
build process is already crippled by the number of kernels built.
- No longer build GENERIC.NOACPI.

branches: 1.11.20; 1.11.22;
Per consensus on tech-install, take "bootN.fs" and "boot-comN.fs" to three
floppies. (The build is broken again without this.) "boot-big1.fs", from
the same ramdisk as "bootN.fs", still just fits in 2880KB by virtue of the
fact that the 9KB of padding is only added once per floppy image.

Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

Remove old files in preparation of rearrangement.

branches: 1.6.4;
Merge latest build system changes, and use the kernels built in ramdisk-kernel.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

allow to set location of INSTALL kernel from command line so that
bootfloppies can be built with r/o /usr/src or with other kernels

remove ${REV} from floppy names per new practice.

branches: 1.2.2;
boot-.fs -> boot.fs

Initial commit of new single floppy install/upgrade system.

For PR kern/38537:

- Make MULTIPROCESSOR mandatory on i386.

Installation changes:

- Update installation section of release notes to match reality.
- Rename INSTALL to INSTALL_FLOPPY, retire INSTALL_LARGE.
- Build INSTALL kernel from GENERIC, like on amd64.
- Update boot menu to allow disabling ACPI and/or SMP.
- Remove GENERIC.NOACPI from the installed kernel list.
- TODO: install default boot.cfg in etc.tgz.
- TODO: possibly enable PCI fixup stuff at runtime if ACPI is disabled.

Build changes:

- No longer build ALL, it's for verification, is slow to build and the
build process is already crippled by the number of kernels built.
- No longer build GENERIC.NOACPI.

branches: 1.24.8; 1.24.10;
Remove GENERIC_LAPTOP and INSTALL_LAPTOP. To compensate, switch
bootfloppy-big to actually use INSTALL_LARGE (with ACPI) and 5 floppies.

branches: 1.23.10;
It's "its."

Pad all floppy images to the floppy size.
Requested by Jason Thorpe in [port-i386/23785]

Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

always set FLOPPYMETAFILE if FLOPPYSIZE!=2880

Migrate MI-shareable stuff to distrib/common/Makefile.tarfloppy.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Use ${PRINTOBJDIR}.

since we have ${TOP}, use it...

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

revert revs 1.10 (and 1.11); now back to using the ustarfs build framework
from ../bootfloppy-common/Makefile.inc like the other boot floppies.
it wasn't ustarfs that was broken, it was the broken PAD=yes code in the
latter trashing the last 8k of the kernel...

1. delete all instances of /dev/{r,}vnd0d. Use vnconfig vnd0 and disklabel
vnd0 and let opendisk(3) DTRT.
2. resize some of the images since we've gotten an average of 5K more
with the new toolchain.
3. comment out the rescue disks, since they don't fit anymore.

Now the whole directory compiles and works with the in-tree toolchain,
but does not work still with USETOOLS.

Switch this one back to FFS, at least until ustarfs is fixed. ustarfs seems
to fail for 2.88 images at certain image sizes.

Rearrange bootfloppies. The idea is that "rescue" tools go on the
floppies as long as they fit, but they are the first to be sacrificed
if space is short, and get moved to a seperate rescue floppy.

This means that the default fdset and the 2.88M image have them,
but others (the "small" and "tiny" floppies) do not.

Sysinst is also back on the "tiny" image, and tested to be working
within 4M.

If the PAD variable is defined, pad the floppy image to its maximum size.
Use this in bootfloppy-big. mkisofs likes to have images fullsize nowadays.
Also, insert a file called "USTAR.volsize.<blocksize_in_octal>" if the
size of the ustar image is not the 1.44M default. This stops bootfloppy-big
from asking for a second diskette.

branches: 1.7.4;
Need BLOCK8K now.

Merge latest build system changes, and use the kernels built in ramdisk-kernel.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

allow to set location of INSTALL kernel from command line so that
bootfloppies can be built with r/o /usr/src or with other kernels

Let's call this image boot-big.fs.

Typo correction.

bootfloppy-big/Makefile creates 2.88M diskette image suitable for CD-ROM boot.
(Depends on new disktab from etc/etc.i386/.)
Don't descend into bootfloppy and bootfloppy-small since these now overflow,
now do ramdisk, fdset, bootfloppy-big, and bootfloppy-tiny.

Reinstate INSTALL kernel for embedded ramdisk installs.

Reasons being:
- INSTALL is GENERIC with an embedded ramdisk, and as such, can benefit from
features included within.
- INSTALL_FLOPPY has its own config(5) file, and is tailored for "small"
floppy images; it misses features/drivers that could be needed to boot
in a decent environment for recent x86 machines (like ACPI)
- makes it closer to floppies distrib available for amd64

While here, comment out INSTALL_FLOPPY and bootfloppy-big image build. NetBSD
does not use the 3.6MiB image for El Torito cdroms anymore.

Remove the FLOPPYMAX limit; i386 needs 4 floppies now. Modify boot.cfg and
release/contents to reflect reality.

See http://mail-index.netbsd.org/port-i386/2011/02/08/msg002307.html

No comments, no objections.

branches: 1.7.16;
For PR kern/38537:

- Make MULTIPROCESSOR mandatory on i386.

Installation changes:

- Update installation section of release notes to match reality.
- Rename INSTALL to INSTALL_FLOPPY, retire INSTALL_LARGE.
- Build INSTALL kernel from GENERIC, like on amd64.
- Update boot menu to allow disabling ACPI and/or SMP.
- Remove GENERIC.NOACPI from the installed kernel list.
- TODO: install default boot.cfg in etc.tgz.
- TODO: possibly enable PCI fixup stuff at runtime if ACPI is disabled.

Build changes:

- No longer build ALL, it's for verification, is slow to build and the
build process is already crippled by the number of kernels built.
- No longer build GENERIC.NOACPI.

branches: 1.6.20; 1.6.22;
Per consensus on tech-install, take "bootN.fs" and "boot-comN.fs" to three
floppies. (The build is broken again without this.) "boot-big1.fs", from
the same ramdisk as "bootN.fs", still just fits in 2880KB by virtue of the
fact that the 9KB of padding is only added once per floppy image.

Use ${TOOL_INSTALLBOOT} - it does work on ustarfs filesytems.
Pass correct option to installboot for bootfloppy-com (serial bootfloppy).

Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

Migrate MI-shareable stuff to distrib/common/Makefile.tarfloppy.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

branches: 1.10.32;
Let this grow to a second floppy. It's much less work than trying to
shave space here & there, only to have the problem occur the next time
the kernel or the ramdisk image slightly grows again.

Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Use ${PRINTOBJDIR}.

since we have ${TOP}, use it...

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

make BLOCK8K match DISKSIZE

Add PS/2 bootfloppy, to be used for installation on IBM PS/2 machines.

branches: 1.17.32;
Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

netbsd.INSTALL_SMALL and netbsd.RESCUE_SMALL have grown past the size
of a single 1.2MB floppy; cranky FLOPPYMAX to use two floppies.
the kernel and the contents of the ramdiskbin have both grown...

(We should just merge the install & rescue functionality of the -small
floppies into one two x 1.2MB floppy set, since -small is for older
machines with 1.2MB floppy drives, versus those with extremely small
RAM constraints)

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Use ${PRINTOBJDIR}.

since we have ${TOP}, use it...

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

branches: 1.9.2;
Rearrange bootfloppies. The idea is that "rescue" tools go on the
floppies as long as they fit, but they are the first to be sacrificed
if space is short, and get moved to a seperate rescue floppy.

This means that the default fdset and the 2.88M image have them,
but others (the "small" and "tiny" floppies) do not.

Sysinst is also back on the "tiny" image, and tested to be working
within 4M.

Fix the previous in another way:

o Wave goodbye to INSTALL_SMALL-based boot image (it was originally
built for 5.25" media, but isn't anymore).
o Make a separate ramdisk image for the INSTALL_TINY image,
using the old script-based installer (not fixed/checked at the moment).
However, at least tweak the profile scripts to start it instead of sysinst.
Also remove ping6 and rtsol from ramdisk compared to original; the
INSTALL_TINY image doesn't have INET6.
o Add dump/restore back into both ramdisk images.
o Add scsictl and chio to the normal ramdisk image (INSTALL-based fdset)
o With dump/restore reinstated, remove the rescue-* and ramdisk-rescue
directories.

So, we're now back to having the recovery tools on the same image as
the boot media images.

Build bootfloppy-small, as a 1.44MB floppy image.

Need BLOCK8K now.

Merge latest build system changes, and use the kernels built in ramdisk-kernel.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

allow to set location of INSTALL kernel from command line so that
bootfloppies can be built with r/o /usr/src or with other kernels

remove ${REV} from floppy names per new practice.

branches: 1.1.2;
small (1.2M) bootfloppy Makefile

branches: 1.13.32;
Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Use ${PRINTOBJDIR}.

since we have ${TOP}, use it...

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

Rearrange bootfloppies. The idea is that "rescue" tools go on the
floppies as long as they fit, but they are the first to be sacrificed
if space is short, and get moved to a seperate rescue floppy.

This means that the default fdset and the 2.88M image have them,
but others (the "small" and "tiny" floppies) do not.

Sysinst is also back on the "tiny" image, and tested to be working
within 4M.

branches: 1.5.4;
Need BLOCK8K now.

Merge latest build system changes, and use the kernels built in ramdisk-kernel.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

allow to set location of INSTALL kernel from command line so that
bootfloppies can be built with r/o /usr/src or with other kernels

Fixes to the install floppies
(from Havard.Eidnes@runit.sintef.no)

Reinstate INSTALL kernel for embedded ramdisk installs.

Reasons being:
- INSTALL is GENERIC with an embedded ramdisk, and as such, can benefit from
features included within.
- INSTALL_FLOPPY has its own config(5) file, and is tailored for "small"
floppy images; it misses features/drivers that could be needed to boot
in a decent environment for recent x86 machines (like ACPI)
- makes it closer to floppies distrib available for amd64

While here, comment out INSTALL_FLOPPY and bootfloppy-big image build. NetBSD
does not use the 3.6MiB image for El Torito cdroms anymore.

Remove the FLOPPYMAX limit; i386 needs 4 floppies now. Modify boot.cfg and
release/contents to reflect reality.

See http://mail-index.netbsd.org/port-i386/2011/02/08/msg002307.html

No comments, no objections.

branches: 1.22.4;
avoid full path to boot.cfg file when building amd64 boot floppy
share code with i386

branches: 1.21.2;
Put boot.cfg for bootfloppy into ustarfs without path
so that bootloader can load it properly.

Put a boot menu on the amd64+i386 boot floppies. Not used yet because
the ustar loader seems to have the menu code if'd out.

branches: 1.19.20; 1.19.22;
Prepare creation of boot CDs:

* Move files in distrib/i386:

floppies/instkernel/Makefile -> instkernel/Makefile
floppies/ramdisk-big/Makefile -> ramdisks/ramdisk-big/Makefile
floppies/ramdisk-big/disktab.preinstall -> ramdisks/ramdisk-big/disktab.preinstall
floppies/ramdisk-big/list -> ramdisks/ramdisk-big/list
floppies/ramdisk-big/list.inet6 -> ramdisks/ramdisk-big/list.inet6
floppies/ramdisk-rescuetiny/Makefile -> ramdisks/ramdisk-rescuetiny/Makefile
floppies/ramdisk-rescuetiny/list -> ramdisks/ramdisk-rescuetiny/list
floppies/ramdisk-small/Makefile -> ramdisks/ramdisk-small/Makefile
floppies/ramdisk-small/list -> ramdisks/ramdisk-small/list
floppies/ramdisk-tiny/Makefile -> ramdisks/ramdisk-tiny/Makefile
floppies/ramdisk-tiny/list -> ramdisks/ramdisk-tiny/list
floppies/common/Makefile.ramdisk -> ramdisks/common/Makefile.ramdisk
floppies/common/dot.profile -> ramdisks/common/dot.profile
floppies/common/list.ramdisk -> ramdisks/common/list.ramdisk
floppies/common/termcap.mini -> ramdisks/common/termcap.mini

* Adjust paths

Pad all floppy images to the floppy size.
Requested by Jason Thorpe in [port-i386/23785]

Overhaul MBR handling (part 1):

<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.

As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.

<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).

amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.

* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).

* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.

* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.

* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.

* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.

installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)

mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.


Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).

Use ${TOOL_INSTALLBOOT} - it does work on ustarfs filesytems.
Pass correct option to installboot for bootfloppy-com (serial bootfloppy).

Switch boot floppies to 'new' i386 bootcode.

Default FLOPPYMAX to 1 for i386 floppies, so the build will fail if an
image accidentally grows past 1 floppy and we didn't know about it.

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

always set FLOPPYMETAFILE if FLOPPYSIZE!=2880

- add support for [-s suffix] to buildfloppies.sh (defaults to "",
rather than the previous ".fs").
- add support for (optional) FLOPPYSUFFIX in Makefile.tarfloppy, and
use appropriately
- remove (now unnecessary) custom release targets in alpha/instkernel/*

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Migrate MI-shareable stuff to distrib/common/Makefile.tarfloppy.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

use ${RELINSTALL} instead of cp -p

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

We need bsd.sys.mk to get ${STRIP} when USETOOLS is not set.

minor whitespace cleanup

add check_RELEASEDIR to targets that require RELEASEDIR to be set

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

use ${RELINSTALL} instead of cp -p

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

We need bsd.sys.mk to get ${STRIP} when USETOOLS is not set.

minor whitespace cleanup

add check_RELEASEDIR to targets that require RELEASEDIR to be set

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

remove unused cruft;
- Chuck Silvers pointed out that the nocluster goop set a now-unused variable
- we now use distrib/common/Makefile.mdset

tweak

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Prepare creation of boot CDs:

* Move files in distrib/i386:

floppies/instkernel/Makefile -> instkernel/Makefile
floppies/ramdisk-big/Makefile -> ramdisks/ramdisk-big/Makefile
floppies/ramdisk-big/disktab.preinstall -> ramdisks/ramdisk-big/disktab.preinstall
floppies/ramdisk-big/list -> ramdisks/ramdisk-big/list
floppies/ramdisk-big/list.inet6 -> ramdisks/ramdisk-big/list.inet6
floppies/ramdisk-rescuetiny/Makefile -> ramdisks/ramdisk-rescuetiny/Makefile
floppies/ramdisk-rescuetiny/list -> ramdisks/ramdisk-rescuetiny/list
floppies/ramdisk-small/Makefile -> ramdisks/ramdisk-small/Makefile
floppies/ramdisk-small/list -> ramdisks/ramdisk-small/list
floppies/ramdisk-tiny/Makefile -> ramdisks/ramdisk-tiny/Makefile
floppies/ramdisk-tiny/list -> ramdisks/ramdisk-tiny/list
floppies/common/Makefile.ramdisk -> ramdisks/common/Makefile.ramdisk
floppies/common/dot.profile -> ramdisks/common/dot.profile
floppies/common/list.ramdisk -> ramdisks/common/list.ramdisk
floppies/common/termcap.mini -> ramdisks/common/termcap.mini

* Adjust paths

Generate a cross-reference map file for the crunched binary.

Add French, German and Polish sysinstmsgs to all ramdisks that include sysinst
expect those where at least one of the language variants isn't built,
and those that are known not to have enough space (i386 ramdisk-tiny).
Files added to list.sysinst, list.sysinst.en is used when these files
cannot be added.
This might hit a size limit on another build - but I have no (sane) way of
testing it.

branches: 1.21.2;
Overhaul MBR handling (part 1):

<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.

As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.

<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).

amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.

* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).

* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.

* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.

* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.

* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.

installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)

mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.


Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).

Change i386 sysinst to use my new boot code.
Update lists for ramdisks to include the required files.
NB /usr/sbin/installboot is not used by sysinst and is only in ramdisk-big.
Increase the sizes of the ramdisks, there is plenty of space in all the
boot floppies except rescue-tiny (2k) and boot-tiny (32k).

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Set DBG=-Os for libhack.

Reduce free inode count by one so ramdisk-big builds.

ensure all sysinst-using makefs generated images have at least 15 inodes free,
and be consistent how MAKEFS_FLAGS is defined.

- Be consistent how libhack is used: If extra HACKOBJS (e.g., gethost.o) are
required, define them before pulling in libhack/Makefile.inc so that the
dependencies work correctly.
- Other minor cleanups

cosmetic reorg

Disable libhack's gethost.o (replacement gethostby{name,addr}()) by default,
as they only support reading /etc/hosts, and its the "least useful" of
the libhack routines. Add gethost.o back to Really Small media which
appears to need the space savings.

parselist.awk
- improve comments
- provide a general purpose variable replacement; replace contents of ${FOO}
with ENVIRON["FOO"].
- deprecate @MACHINE@ and @MACHINE_ARCH@ in favour of using ${MACHINE}
and ${MACHINE_ARCH} instead
- add errx() function; like err(), but doesn't print the line number
- invoke this script with various variables defined via PARSELISTENV

*/Makefile*
- use PARSELISTENV instead of POPULATEENV, and add variables like DESTDIR
- other minor tweaks

*/list*
- replace @MACHINE@ with ${MACHINE}

use parselist.awk's newly added MTREE arg rather than having an
mtree.conf fragment for one file

cosmetic tweak

replace ${_SRC_TOP_}/distrib with ${DISTRIBDIR}

cosmetic sort

explain why gethost.o is disabled

- set ${TOP} to ${.CURDIR}/.., and use as appropriate
- use ${DISTRIBDIR} as appropriate
- migrate most of mtree.conf to ${DISTRIBDIR}/common/mtree.common,
leaving /.profile in mtree.conf
- remove MAKEDEV_DEVS support; replaced with MAKEDEVTARGETS support in
${DISTRIBDIR}/common/Makefile.makedev

If MAKEDEV_DEVS is defined, run etc.i386/MAKEDEV through MAKEDEV.wrapper and
makedev2spec.awk to generate another mtree specfile for use when building
the image, and don't copy dev/MAKEDEV to the target image. This is primarily
for the tiny images which might not have enough memory for an mfs /dev.
Otherwise (MAKEDEV_DEVS not defined), continue to copy dev/MAKEDEV.

add some more IMAGEDEPENDS

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

Express more confidence in our ability to boot on hardware with ACPI
enabled and don't warn our users that it might not and already suggest
workarounds.

The ability to disable ACPI and SMP is still there, by dropping to
the boot prompt.

branches: 1.3.46;
Reinstate INSTALL kernel for embedded ramdisk installs.

Reasons being:
- INSTALL is GENERIC with an embedded ramdisk, and as such, can benefit from
features included within.
- INSTALL_FLOPPY has its own config(5) file, and is tailored for "small"
floppy images; it misses features/drivers that could be needed to boot
in a decent environment for recent x86 machines (like ACPI)
- makes it closer to floppies distrib available for amd64

While here, comment out INSTALL_FLOPPY and bootfloppy-big image build. NetBSD
does not use the 3.6MiB image for El Torito cdroms anymore.

Remove the FLOPPYMAX limit; i386 needs 4 floppies now. Modify boot.cfg and
release/contents to reflect reality.

See http://mail-index.netbsd.org/port-i386/2011/02/08/msg002307.html

No comments, no objections.

branches: 1.2.2;
fix typo.

branches: 1.1.4; 1.1.6; 1.1.8; 1.1.10;
Put a boot menu on the amd64+i386 boot floppies. Not used yet because
the ustar loader seems to have the menu code if'd out.

Prepare creation of boot CDs:

* Move files in distrib/i386:

floppies/instkernel/Makefile -> instkernel/Makefile
floppies/ramdisk-big/Makefile -> ramdisks/ramdisk-big/Makefile
floppies/ramdisk-big/disktab.preinstall -> ramdisks/ramdisk-big/disktab.preinstall
floppies/ramdisk-big/list -> ramdisks/ramdisk-big/list
floppies/ramdisk-big/list.inet6 -> ramdisks/ramdisk-big/list.inet6
floppies/ramdisk-rescuetiny/Makefile -> ramdisks/ramdisk-rescuetiny/Makefile
floppies/ramdisk-rescuetiny/list -> ramdisks/ramdisk-rescuetiny/list
floppies/ramdisk-small/Makefile -> ramdisks/ramdisk-small/Makefile
floppies/ramdisk-small/list -> ramdisks/ramdisk-small/list
floppies/ramdisk-tiny/Makefile -> ramdisks/ramdisk-tiny/Makefile
floppies/ramdisk-tiny/list -> ramdisks/ramdisk-tiny/list
floppies/common/Makefile.ramdisk -> ramdisks/common/Makefile.ramdisk
floppies/common/dot.profile -> ramdisks/common/dot.profile
floppies/common/list.ramdisk -> ramdisks/common/list.ramdisk
floppies/common/termcap.mini -> ramdisks/common/termcap.mini

* Adjust paths

Add the dmesg() program to all the i386 ramdisk images and remove the
shell function implemented dmesg using 'cat /kern/msgbuf'.
This means we don't need kernfs.

branches: 1.4.6;
Don't set baud rate when setting 'sane' stty settings, that way we use
the baud rate set by the bootloader.
Fixes PR port-i386/18358

netbsd.org->NetBSD.org

Add wsvt25 termcap entry, and use it if BOOTMODEL=big. Sysinst now looks
nice in colour. From Grant Beattie <grant@netbsd.org>, with changes by me.

branches: 1.1.2;
Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

- set ${TOP} to ${.CURDIR}/.., and use as appropriate
- use ${DISTRIBDIR} as appropriate
- migrate most of mtree.conf to ${DISTRIBDIR}/common/mtree.common,
leaving /.profile in mtree.conf
- remove MAKEDEV_DEVS support; replaced with MAKEDEVTARGETS support in
${DISTRIBDIR}/common/Makefile.makedev

If MAKEDEV_DEVS is defined, run etc.i386/MAKEDEV through MAKEDEV.wrapper and
makedev2spec.awk to generate another mtree specfile for use when building
the image, and don't copy dev/MAKEDEV to the target image. This is primarily
for the tiny images which might not have enough memory for an mfs /dev.
Otherwise (MAKEDEV_DEVS not defined), continue to copy dev/MAKEDEV.

Prepare creation of boot CDs:

* Move files in distrib/i386:

floppies/instkernel/Makefile -> instkernel/Makefile
floppies/ramdisk-big/Makefile -> ramdisks/ramdisk-big/Makefile
floppies/ramdisk-big/disktab.preinstall -> ramdisks/ramdisk-big/disktab.preinstall
floppies/ramdisk-big/list -> ramdisks/ramdisk-big/list
floppies/ramdisk-big/list.inet6 -> ramdisks/ramdisk-big/list.inet6
floppies/ramdisk-rescuetiny/Makefile -> ramdisks/ramdisk-rescuetiny/Makefile
floppies/ramdisk-rescuetiny/list -> ramdisks/ramdisk-rescuetiny/list
floppies/ramdisk-small/Makefile -> ramdisks/ramdisk-small/Makefile
floppies/ramdisk-small/list -> ramdisks/ramdisk-small/list
floppies/ramdisk-tiny/Makefile -> ramdisks/ramdisk-tiny/Makefile
floppies/ramdisk-tiny/list -> ramdisks/ramdisk-tiny/list
floppies/common/Makefile.ramdisk -> ramdisks/common/Makefile.ramdisk
floppies/common/dot.profile -> ramdisks/common/dot.profile
floppies/common/list.ramdisk -> ramdisks/common/list.ramdisk
floppies/common/termcap.mini -> ramdisks/common/termcap.mini

* Adjust paths

Adds FFSv2 boot code to install floppies

Overhaul MBR handling (part 1):

<sys/bootblock.h>:
* Added definitions for the Master Boot Record (MBR) used by
a variety of systems (primarily i386), including the format
of the BIOS Parameter Block (BPB).
This information was cribbed from a variety of sources
including <sys/disklabel_mbr.h> which this is a superset of.

As part of this, some data structure elements and #defines
were renamed to be more "namespace friendly" and consistent
with other bootblocks and MBR documentation.
Update all uses of the old names to the new names.

<sys/disklabel_mbr.h>:
* Deprecated in favor of <sys/bootblock.h> (the latter is more
"host tool" friendly).

amd64 & i386:
* Renamed /usr/mdec/bootxx_dosfs to /usr/mdec/bootxx_msdos, to
be consistent with the naming convention of the msdosfs tools.

* Removed /usr/mdec/bootxx_ufs, as it's equivalent to bootxx_ffsv1
and it's confusing to have two functionally equivalent bootblocks,
especially given that "ufs" has multiple meanings (it could be
a synonym for "ffs", or the group of ffs/lfs/ext2fs file systems).

* Rework pbr.S (the first sector of bootxx_*):
+ Ensure that BPB (bytes 11..89) and the partition table
(bytes 446..509) do not contain code.
+ Add support for booting from FAT partitions if BOOT_FROM_FAT
is defined. (Only set for bootxx_msdos).
+ Remove "dummy" partition 3; if people want to installboot(8)
these to the start of the disk they can use fdisk(8) to
create a real MBR partition table...
+ Compile with TERSE_ERROR so it fits because of the above.
Whilst this is less user friendly, I feel it's important
to have a valid partition table and BPB in the MBR/PBR.

* Renamed /usr/mdec/biosboot to /usr/mdec/boot, to be consistent
with other platforms.

* Enable SUPPORT_DOSFS in /usr/mdec/boot (stage2), so that
we can boot off FAT partitions.

* Crank version of /usr/mdec/boot to 3.1, and fix some of the other
entries in the version file.

installboot(8) (i386):
* Read the existing MBR of the filesystem and retain the BIOS
Parameter Block (BPB) in bytes 11..89 and the MBR partition
table in bytes 446..509. (Previously installboot(8) would
trash those two sections of the MBR.)

mbrlabel(8):
* Use sys/lib/libkern/xlat_mbr_fstype.c instead of homegrown code
to map the MBR partition type to the NetBSD disklabel type.


Test built "make release" for i386, and new bootblocks verified to work
(even off FAT!).

Change i386 sysinst to use my new boot code.
Update lists for ramdisks to include the required files.
NB /usr/sbin/installboot is not used by sysinst and is only in ramdisk-big.
Increase the sizes of the ramdisks, there is plenty of space in all the
boot floppies except rescue-tiny (2k) and boot-tiny (32k).

use 444 instead of 644 for /.profile

branches: 1.7.2;
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

- add specific special entry for sys/arch/${MACHINE}/stand/installboot
for ports that don't yet use the MI usr.sbin/installboot
- remove now-unnecessary srcdir for sys/arch/${MACHINE}/stand

parselist.awk
- improve comments
- provide a general purpose variable replacement; replace contents of ${FOO}
with ENVIRON["FOO"].
- deprecate @MACHINE@ and @MACHINE_ARCH@ in favour of using ${MACHINE}
and ${MACHINE_ARCH} instead
- add errx() function; like err(), but doesn't print the line number
- invoke this script with various variables defined via PARSELISTENV

*/Makefile*
- use PARSELISTENV instead of POPULATEENV, and add variables like DESTDIR
- other minor tweaks

*/list*
- replace @MACHINE@ with ${MACHINE}

use parselist.awk's newly added MTREE arg rather than having an
mtree.conf fragment for one file

- migrate a bunch of the common list stuff to common/list.ramdisk
- use ${DISTRIBDIR} as appropriate
- use ${DISTRIBDIR}/common/list.sysinst if USE_SYSINST is defined,
removing any replicated list info
- define USE_SYSINST in the sysinst-using ramdisks
- replace MAKEDEV_DEVS with MAKEDEVTARGETS

If MAKEDEV_DEVS is defined, run etc.i386/MAKEDEV through MAKEDEV.wrapper and
makedev2spec.awk to generate another mtree specfile for use when building
the image, and don't copy dev/MAKEDEV to the target image. This is primarily
for the tiny images which might not have enough memory for an mfs /dev.
Otherwise (MAKEDEV_DEVS not defined), continue to copy dev/MAKEDEV.

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

use parselist.awk's newly added MTREE arg rather than having an
mtree.conf fragment for one file

- set ${TOP} to ${.CURDIR}/.., and use as appropriate
- use ${DISTRIBDIR} as appropriate
- migrate most of mtree.conf to ${DISTRIBDIR}/common/mtree.common,
leaving /.profile in mtree.conf
- remove MAKEDEV_DEVS support; replaced with MAKEDEVTARGETS support in
${DISTRIBDIR}/common/Makefile.makedev

no need to list etc/passwd anymore

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

remove unused cruft;
- Chuck Silvers pointed out that the nocluster goop set a now-unused variable
- we now use distrib/common/Makefile.mdset

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Prepare creation of boot CDs:

* Move files in distrib/i386:

floppies/instkernel/Makefile -> instkernel/Makefile
floppies/ramdisk-big/Makefile -> ramdisks/ramdisk-big/Makefile
floppies/ramdisk-big/disktab.preinstall -> ramdisks/ramdisk-big/disktab.preinstall
floppies/ramdisk-big/list -> ramdisks/ramdisk-big/list
floppies/ramdisk-big/list.inet6 -> ramdisks/ramdisk-big/list.inet6
floppies/ramdisk-rescuetiny/Makefile -> ramdisks/ramdisk-rescuetiny/Makefile
floppies/ramdisk-rescuetiny/list -> ramdisks/ramdisk-rescuetiny/list
floppies/ramdisk-small/Makefile -> ramdisks/ramdisk-small/Makefile
floppies/ramdisk-small/list -> ramdisks/ramdisk-small/list
floppies/ramdisk-tiny/Makefile -> ramdisks/ramdisk-tiny/Makefile
floppies/ramdisk-tiny/list -> ramdisks/ramdisk-tiny/list
floppies/common/Makefile.ramdisk -> ramdisks/common/Makefile.ramdisk
floppies/common/dot.profile -> ramdisks/common/dot.profile
floppies/common/list.ramdisk -> ramdisks/common/list.ramdisk
floppies/common/termcap.mini -> ramdisks/common/termcap.mini

* Adjust paths

Add wsvt25 termcap entry, and use it if BOOTMODEL=big. Sysinst now looks
nice in colour. From Grant Beattie <grant@netbsd.org>, with changes by me.

branches: 1.1.2;
Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

branches: 1.12.32;
Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

Merge kernel-ramdisk & kernel-rescue into instkernel, now that
../../common/Makefile.mdset supports building multiple copies of the
same kernel (as long as they're to separate filenames).
Now there's no need to set FLOPPYKERNDIR, as it now defaults to instkernel.

we don't want "rescue-tiny.fs.fs" ...

- Convert to using distrib/common/buildfloppies.sh, which can build both
single and multi-volume floppies in better fashion that the crufty
shell commands in the various Makefiles.
- Move fdset* -> bootfloppy*, as that's more consistent

Use 3rd argument of MDSETTARGETS to change name of the rescue kernels
from netbsd.INSTALL_{SMALL,TINY} to netbsd.RESCUE_{SMALL,TINY}.
Go back to installing copies of these in the release directory.

Yet Another Cleanup:
- factor more stuff into common/Makefile.*
- use NDWO makefile layout
- don't always rebuild bootfloppy-* and fdset-* stuff. (mmm, dependencies)
- add .WAIT sync in top level Makefile

Use ${PRINTOBJDIR}.

since we have ${TOP}, use it...

Major overhaul, to enable unprivileged (cross) building, removing the
requirement to build as root on a system with vnconfig.


Use ${KERNSRCDIR} and ${_SRC_TOP_} where appropriate

Remove now-obsolete:
list2sh.awk runlist.sh bootfloppy-common/list

Bootfloppy-*/Makefile: don't need to set DISKTYPE or BLOCK8K any more

Rename bootfloppy-common/Makefile.inc to common/Makefile.bootfloppy
and fdset-common/Makefile.inc to common/Makefile.fdset
This uses makefs instead of vnconfig and disklabel, thus removing the
need for root privileges to build these floppies..

Add common/Makefile.ramdisk, to simplify ramdisk-*/Makefile.
Uses shared ${_SRC_TOP_}/distrib/common/Makefile.crunch and
${_SRC_TOP_}/distrib/common/Makefile.image to even further simply things.

Migrate ramdisk-*/dot.profile to a shared common/dot.profile, which
detects whether it's an install or rescue profile based on the existance
of /sysinst. Remove /dev generation code as init(8) now does that for us.

Migrate common parts of */list to a shared common/list.ramdisk.
Convert ramdisk-*/list to new format used by distrib/common/parselist.awk
Don't bother running pwd_mkdb now that libhack's getpwent parses
/etc/master.passwd instead of /etc/passwd.

Migrate ramdisk-*/mtree.conf to a shared common/mtree.conf, which is now a
new full-path-style specfile.

Remove ramdisk-*/ramdiskbin.conf as it's now automatically generated
from ramdisk-*/list by parselist.awk.

Migrate ramdisk-*/termcap.mini to a shared common/termcap.mini.

Remove unused ramdisk-{small,tiny}/disktab.preinstall.

Use .for loops in kernel-*/Makefile to simply defining mostly-duplicated
targets.

ramdisk-*/Makefile: convert to using common/Makefile.ramdisk

Remove unused ramdisk-*/dot.hdprofile.

branches: 1.3.2;
Rearrange bootfloppies. The idea is that "rescue" tools go on the
floppies as long as they fit, but they are the first to be sacrificed
if space is short, and get moved to a seperate rescue floppy.

This means that the default fdset and the 2.88M image have them,
but others (the "small" and "tiny" floppies) do not.

Sysinst is also back on the "tiny" image, and tested to be working
within 4M.

Fix the previous in another way:

o Wave goodbye to INSTALL_SMALL-based boot image (it was originally
built for 5.25" media, but isn't anymore).
o Make a separate ramdisk image for the INSTALL_TINY image,
using the old script-based installer (not fixed/checked at the moment).
However, at least tweak the profile scripts to start it instead of sysinst.
Also remove ping6 and rtsol from ramdisk compared to original; the
INSTALL_TINY image doesn't have INET6.
o Add dump/restore back into both ramdisk images.
o Add scsictl and chio to the normal ramdisk image (INSTALL-based fdset)
o With dump/restore reinstated, remove the rescue-* and ramdisk-rescue
directories.

So, we're now back to having the recovery tools on the same image as
the boot media images.

Add construction of three types of "rescue" images, based on the
boot images.

The difference compared to the boot images is that these do not contain
sysinst, but do on the other hand contain dump/rdump, restore/rrestore,
scsictl and chio in addition to the other stuff already on the install
floppies.

The images built are
rescue1.fs
rescue2.fs Based on the full INSTALL kernel, on two floppies
rescue-sm.fs Based on INSTALL_SMALL
rescue-ti.fs Based on INSTALL_TINY