bump

bump

branches: 1.22.10;
1. Remove all the special handling of variables (-d -p -P -s -S) that
were dealing with DBG (-d) LDSTATIC/NOPIE (-p), and the rest with
disabling/enabling sanitizers.
2. Use emalloc/estrdup for all the allocators instead of only some cases.
3. Add -V varspec which passes variables on the command line (as DBG
and LDSTATIC used to be passed before) instead of appending them
to the on-the-fly Makefile using -v varspec.
4. Change the distrib and rescue Makefiles to use -V instead of the removed
flags.

The motivation of this is to make variable handling consistent, less magical,
and remove the need for changing crunchgen each time we want to add disabling
an option by default.

(as proposed in tech-toolchain)

branches: 1.21.12;
+= for MAKEFS_FLAGS

branches: 1.20.30; 1.20.34;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

Replace references to local and now no-longer-existing termcap files
with references to ${DISTRIBB}/common/termcap. Hi, abs@!

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

branches: 1.15.12;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Remove "-Wa,-xgot" hack from DBG flag for broken objcopy-crunchide
that has been fixed by simonb.

BTW, should we also add "-mmemcpy" here to reduce code size?

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

Use termcap.src (instead of non-existant termcap.mini).
Change image depends from uboot.lif to boot and bootxx_ffs.

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

The "objcopy" based crunchide method has a problem on MIPS; it turns global
symbols into locals, but relocs are left in place (rather than attempting
to resolve-in-place with "ld -r", even with "-Bsymbolic").

Standard MIPS code will generate CALL16 relocs for function calls, but
the linker forbids such relocs from being used to call local symbols (such
as those turned "local" by objcopy). So, rather than battle the toolchain
uphill, work around it for the moment by forcing 32-bit GOT references with
the assembler option "-xgot".

This will be fixed in a more clean manner in the future.

convert to NDWO

don't set the owner or group when installing into $RELEASEDIR

Remove duplicate .include

Replace crunchgen with

Add MTREE?= to add Makefiles and use when running mtree

Use symbol MTREECONF instead of MTREE to refer configuration file
to avoid conflicts. Pointed out by chs@netbsd.org.

Ensure RELEASEDIR is set before make release.

- Add "make release" target
- Create directories in release stage area before installing target

Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.2.26;
Spell removable with only two es. Inspired by jmc@openbsd.

Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive

convert to NDWO

Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

branches: 1.2.32;
netbsd.org->NetBSD.org

Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.2.32; 1.2.100; 1.2.102;
netbsd.org->NetBSD.org

Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive

Remove unnecessary gnu/usr.bin path from SRCDIRS.

Use src/distrib/utils/x_gzip in all install ramdisks/miniroots for now
since installation file systems might be flooded by -llzma.

branches: 1.17.4;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Of the arious list files 28 said
PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip
while 14 picked
PROG usr/bin/gzip usr/bin/gunzip usr/bin/gzcat

Make them all choose the former. No functional change.

Fix indent on common/protocols changes.

branches: 1.8.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.6.12; 1.6.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Add -lz, now needed by gzip.

seems we don't need /usr/bin/strings in ramdisk

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

convert to NDWO

Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive

convert to NDWO

Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive

convert to NDWO

- add specific special entry for sys/arch/${MACHINE}/stand/installboot
for ports that don't yet use the MI usr.sbin/installboot
- remove now-unnecessary srcdir for sys/arch/${MACHINE}/stand

Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

branches: 1.1.34;
Installation bootimage for NetBSD/mipsco

Currently supports Hard Disk boot only. Mips Firmware cannot boot to
read-only media suchas CDROM drive