all: fix "Invalid internal option" warning from make

branches: 1.4.12;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.3.18;
whitespace tweak

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

Automate the MD `make release|snapshot' procedure.
[I should have done this ages ago.]

unused

replace BSDSRCDIR with _SRC_TOP_, since the latter is more likely to
be "accurate". document _SRC_TOP_.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

note that only static compilation makes sense here

mvme68k specific makefile for Mi miniroot

branches: 1.1.2; 1.1.14;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

Consistently use ${RELEASEDIR}/${RELEASEMACHINE} instead of
${RELEASEDIR}/${MACHINE} (Paul Ripke)

Now that we do not force debug sets off install CDs any more, explicitly
set CDRELEASE_NODEBUG everywhere.

branches: 1.1.2; 1.1.14; 1.1.80; 1.1.82;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.8.34;
- whitespace consistency cleanup
- build (mdset/nm/strip) into ${filename} as one rule, and move ${filename}.gz
into separate rule
- rename MDSET.${filename}.nosymbols -> MDSET_NOSYMBOLS.${filename}
- rename MDSET.${filename}.post -> MDSET_POST.${filename}, and don't do
suffix handling here
- rework suffix handling:
- rename MDSET.${filename}.suffixes -> MDSET_SUFFIXES.${filename},
and change from list of suffixes to list of "suffix cmdtobuildsuffix",
where cmdtobuildsuffix is the name of the variable containing the
command to build ${filename}.${suffix} (available as "${.TARGET}").
- for each ${filename}.${suffix}, depend upon ${filename} and use
${cmdtobuildsuffix} to create the former.
- add separate ${filename}.${suffix}.gz rule
- mipsco & pmax: rename "install.gz" to "netbsd-INSTALL.gz", for
consistency and so the target to build the mdset kernel doesn't get
confused with general "install" target

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Makefile.mdset:
replace
TARGETS = KERNEL IMAGE [...]
with
MDTARGETS = KERNEL IMAGE FILENAME [...]
If FILENAME is "-", use "netbsd.${KERNEL}" as the target filename

The rest:
Update for new MDTARGETS syntax. In some cases, the kernel
name from the "old" method will be used to override the default.

- don't pull in <bsd.prog.mk> in Makefile.mdset; do that in the caller instead
- renamed optional post-strip action variable from ${KERNEL}.post to
netbsd.${KERNEL}.post

convert to using distrib/common/Makefile.mdset

Don't bother making/installing the kernel symbol table.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

Commit work-in-progess rototill of distrib/miniroot and associated machine
dependent files:

- Use infrastructure from distrib/common to build file system images with
crunchgen-ed programs from a list file.

- Non root ("UNPRIVED") builds from a read-only source tree are possible,
as makefs(8) replaces vnconfig(8)/vnd use, devices are generated using
common/makedev2spec.awk, etc.

- Cross builds should be possible, except that some ports need cross-compile
host tool versions of installboot and any appropriate host disk labelling
tools.
XXX: pmax, sparc and vax need fixing for this!

- This code has NOT YET BEEN TESTED on most of the ports.
It should work, but it is extremely likely that the file system
parameters may need tweaking to get things to fit.
See MAKEFS_FLAGS in sparc/miniroot/Makefile.inc for an example.
If assistance is required, please ask!

Automate the MD `make release|snapshot' procedure.
[I should have done this ages ago.]

+= for MAKEFS_FLAGS

branches: 1.13.14; 1.13.18;
Fix PR install/47123 (sysinst fails with "openpty() failed" on many ports):
Add "ipty" to MAKEDEVTARGETS in miniroot/Makefile.inc since "MAKEDEV all"
no longer creates /dev/pty* device nodes and miniroot doesn't mount ptyfs.

branches: 1.12.6; 1.12.8; 1.12.12; 1.12.14;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.8.32;
don't bother copying or generating etc/spwd.db, as the miniroot was
switched to libhack a little while ago

branches: 1.7.2;
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

- replace image_md_post: target with IMAGE_MD_POST variable, and use
that after building ${IMAGE}
- use ${IMAGEBUILT} to ensure that IMAGE_MD_POST is only run if IMAGE changes

From lukem: Fix the lack of inodes problem a slightly different way.
[Although the real cure is to fix makefs(8).]

ensure all sysinst-using makefs generated images have at least 15 inodes free,
and be consistent how MAKEFS_FLAGS is defined.

Add MAKEFS_FLAGS, as suggested by Luke Mewburn. This fixes a problem
with a lack of inodes on the miniroot image.

Add an empty (for now) `image_md_post'.

Commit work-in-progess rototill of distrib/miniroot and associated machine
dependent files:

- Use infrastructure from distrib/common to build file system images with
crunchgen-ed programs from a list file.

- Non root ("UNPRIVED") builds from a read-only source tree are possible,
as makefs(8) replaces vnconfig(8)/vnd use, devices are generated using
common/makedev2spec.awk, etc.

- Cross builds should be possible, except that some ports need cross-compile
host tool versions of installboot and any appropriate host disk labelling
tools.
XXX: pmax, sparc and vax need fixing for this!

- This code has NOT YET BEEN TESTED on most of the ports.
It should work, but it is extremely likely that the file system
parameters may need tweaking to get things to fit.
See MAKEFS_FLAGS in sparc/miniroot/Makefile.inc for an example.
If assistance is required, please ask!

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.8.32; 1.8.100; 1.8.102;
netbsd.org->NetBSD.org

Make sysinst the default installer, with the option of falling back
to the old shell-script installer. Based on the sparc dot.profile.

sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Don't start update.

branches: 1.3.4;
after checking and setting DONEPROFILE, export it so that children of the
shell (e.g. programs and shells invoked via sysinst) don't try to run
sysinst again. Fixes PR#7805.

branches: 1.2.2;
Add $HOME to profiles, closes pr 4323 (from Tatoku Ogaito)

mvme68k miniroot config files

s/displyed/displayed/

Use proper release version strings ("9.1" rather than "91") in banners.

Also define and use "MACHINE" variable to describe port names
(no uname(1) or sysctl(8) in miniroot binary list by default).

I guess the short format like "91" by ${DISTRIBREV} was used only
for split sets for floppies in 1990's releases.

Worth to pullup to netbsd-9.

The kernel and X sets should be specified in MD miniroot scripts.

Otherwise they are not listed at least on ftp installation.
The problem was reported by Martin Trusler on port-hp300@:
https://mail-index.netbsd.org/port-hp300/2020/11/21/msg000174.html

Should be pulled up to netbsd-9 and netbsd-8.

branches: 1.8.2;
adjust miniroot scripts to deal with the time prefix in dmesg

modernize, and avoid -a -o

branches: 1.6.40; 1.6.48;
Relegate edlabel to use in extremely memory constrained install
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change

Fix copy&pasto in license text and move to 2 clause

branches: 1.4.32; 1.4.34;
Rewrite the MD install script to use awk instead of grep, since
trying to include grep in the miniroot currently causes a build
failure, ref. PR#20431.

Also correct a typo/inconsistency "no disk label" -> "no disklabel"
(the disklabel program is not consistent in it's use...), here we
just compensate.

Reviewed by Steve Woodford.

Use "-t ffs" when remounting rootdev read/write.

branches: 1.2.10;
Updates for MVME167 support.

mvme68k miniroot config files

distrib: Adjust for nawk/bin/awk to nawk/bin

handle awk move

branches: 1.24.28;
fix awk

nvi has moved.

branches: 1.22.2; 1.22.8;
Update location of "less" source directory to the build of various
install medias.

Relegate edlabel to use in extremely memory constrained install
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

No need to install /usr/share/zoneinfo into miniroot
because libc functions in libhack doesn't require it and
zoneinfo files seem to get larger since tzcode2009k import.
(due to 64bit time_t support?)

Briefly tested sysinst on sparc miniroot.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

usr.bin/vi/build -> usr.bin/nvi/build

branches: 1.14.26;
Adapt to the replacement of gawk with nawk, source accessible as awk.

branches: 1.13.2;
Rewrite the MD install script to use awk instead of grep, since
trying to include grep in the miniroot currently causes a build
failure, ref. PR#20431.

Also correct a typo/inconsistency "no disk label" -> "no disklabel"
(the disklabel program is not consistent in it's use...), here we
just compensate.

Reviewed by Steve Woodford.

The ports which use grep in their miniroot need to have a special
rule to get at the source (and object) directory after the recent
grep move.

as COPYDIR copies files with 444 permissions, we need to explicitly
add MTREE entries to change the permissions of executable programs
such as usr/mdec/installboot and usr/mdec/binstall

Ensure the miniroot copy of /usr/mdec/installboot is executable.

don't bother copying or generating etc/spwd.db, as the miniroot was
switched to libhack a little while ago

branches: 1.8.2;
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Commit work-in-progess rototill of distrib/miniroot and associated machine
dependent files:

- Use infrastructure from distrib/common to build file system images with
crunchgen-ed programs from a list file.

- Non root ("UNPRIVED") builds from a read-only source tree are possible,
as makefs(8) replaces vnconfig(8)/vnd use, devices are generated using
common/makedev2spec.awk, etc.

- Cross builds should be possible, except that some ports need cross-compile
host tool versions of installboot and any appropriate host disk labelling
tools.
XXX: pmax, sparc and vax need fixing for this!

- This code has NOT YET BEEN TESTED on most of the ports.
It should work, but it is extremely likely that the file system
parameters may need tweaking to get things to fit.
See MAKEFS_FLAGS in sparc/miniroot/Makefile.inc for an example.
If assistance is required, please ask!

fix to work with obj dirs.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Nuke strings(1). It's not required for a miniroot.

branches: 1.3.2;
- Move the pwd.db & spwd.db files into the list-files of the ports who need
them.
- Use x_dd & x_ifconfig.

Updates for MVME167 support.

mvme68k miniroot config files

increase ramdisk size for gcc48.

branches: 1.28.26;
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Bump ramdisk size to compensate for recent bloat.

branches: 1.25.12; 1.25.14; 1.25.16;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Bump ramdisk size from 800k to 900k so the contents fit again.

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

minor NDWO consistency tweak

Set DBG=-Os for libhack.

- Be consistent how libhack is used: If extra HACKOBJS (e.g., gethost.o) are
required, define them before pulling in libhack/Makefile.inc so that the
dependencies work correctly.
- Other minor cleanups

as this uses libhack, copy in a useful etc/master.passwd rather than
an unused etc/passwd

Disable libhack's gethost.o (replacement gethostby{name,addr}()) by default,
as they only support reading /etc/hosts, and its the "least useful" of
the libhack routines. Add gethost.o back to Really Small media which
appears to need the space savings.

- use ${_SRC_TOP_} instead of ${CURDIR}/../../../ [../../]
- fix IMAGEDEPENDS; it should contain at least all the COPY items from list

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

Make this work again.

Convert to using ${MDSETIMAGE}.

Provide a default value for $MDSETIMAGE and pull in bsd.own.mk to have
it overriden as needed for cross/-current builds.

make this work with obj dirs.

Add MTREE?= to add Makefiles and use when running mtree

Speeling fix.

Up the ramdisk size to 1024 blocks.

Change all ocurrences of "crunchgen" to ${CRUNCHGEN}

Use
${MAKE}
instead of
make

branches: 1.6.4;
use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Sync with the recent crunchgen changes.
- Remove *.cro files and not the obsoleted *.lo files.

From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.

Modify all calls to newfs in ramdisk/miniroot creation to include
the needed endianism of the architecture. One step towards cross-building
releases.

Not touched are newfs calls in install scripts as they run on the desired
machine and thus default correctly.

distclean is a synonym for cleandir

We don't need to manually flush the buffer cache after ``vnconfig -u''
anymore.

mvme68k installation ramdisk config files.

branches: 1.1.34;
Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

Remove unnecessary gnu/usr.bin path from SRCDIRS.

branches: 1.19.4;
Relegate edlabel to use in extremely memory constrained install
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Fix indent on common/protocols changes.

branches: 1.16.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.14.12; 1.14.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Remove "srcdir distrib/utils/x_mount" from ramdisk lists
since src/sbin/mount/Makefile no longer links fs specific routines.

Now that usr.bin/ftp/Makefile supports SMALLPROG and SMALLPROG_INET6,
we don't need distrib/utils/x_ftp anymore...

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

remove bin/echo; it's builtin to bin/sh
consistency cleanup

as this uses libhack, copy in a useful etc/master.passwd rather than
an unused etc/passwd

don't need x_sh in NDWO

- use ${_SRC_TOP_} instead of ${CURDIR}/../../../ [../../]
- fix IMAGEDEPENDS; it should contain at least all the COPY items from list

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

Use the real versions of protocols(5) and services(5) instead
of inferior home-grown ones.

Back up one more level to get etc/netconfig

branches: 1.3.2;
Need /etc/netconfig.

Fix listfiles to handle object directories. Patches supplied by
Izumi Tsutsui in PR misc/7628.

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.

branches: 1.2.38;
rename (revert) memory disk filename /dev/mdX -> /dev/mdXa

mvme68k installation ramdisk config files.

as this uses libhack, copy in a useful etc/master.passwd rather than
an unused etc/passwd

mvme68k installation ramdisk config files.

Use the real versions of protocols(5) and services(5) instead
of inferior home-grown ones.

branches: 1.1.10;
mvme68k installation ramdisk config files.

Use the real versions of protocols(5) and services(5) instead
of inferior home-grown ones.

branches: 1.1.10;
mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.

s/Partititon/Partition/

Relegate edlabel to use in extremely memory constrained install
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change

branches: 1.3.42;
The 167Bug> boot command line was not quite correct.

branches: 1.2.2;
Updates for MVME167 support.

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

partiton -> partition

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.