increase ramdisk size for gcc48.

branches: 1.28.26;
${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Bump ramdisk size to compensate for recent bloat.

branches: 1.25.12; 1.25.14; 1.25.16;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Bump ramdisk size from 800k to 900k so the contents fit again.

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

minor NDWO consistency tweak

Set DBG=-Os for libhack.

- Be consistent how libhack is used: If extra HACKOBJS (e.g., gethost.o) are
required, define them before pulling in libhack/Makefile.inc so that the
dependencies work correctly.
- Other minor cleanups

as this uses libhack, copy in a useful etc/master.passwd rather than
an unused etc/passwd

Disable libhack's gethost.o (replacement gethostby{name,addr}()) by default,
as they only support reading /etc/hosts, and its the "least useful" of
the libhack routines. Add gethost.o back to Really Small media which
appears to need the space savings.

- use ${_SRC_TOP_} instead of ${CURDIR}/../../../ [../../]
- fix IMAGEDEPENDS; it should contain at least all the COPY items from list

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

Make this work again.

Convert to using ${MDSETIMAGE}.

Provide a default value for $MDSETIMAGE and pull in bsd.own.mk to have
it overriden as needed for cross/-current builds.

make this work with obj dirs.

Add MTREE?= to add Makefiles and use when running mtree

Speeling fix.

Up the ramdisk size to 1024 blocks.

Change all ocurrences of "crunchgen" to ${CRUNCHGEN}

Use
${MAKE}
instead of
make

branches: 1.6.4;
use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Sync with the recent crunchgen changes.
- Remove *.cro files and not the obsoleted *.lo files.

From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.

Modify all calls to newfs in ramdisk/miniroot creation to include
the needed endianism of the architecture. One step towards cross-building
releases.

Not touched are newfs calls in install scripts as they run on the desired
machine and thus default correctly.

distclean is a synonym for cleandir

We don't need to manually flush the buffer cache after ``vnconfig -u''
anymore.

mvme68k installation ramdisk config files.

branches: 1.1.34;
Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

Remove unnecessary gnu/usr.bin path from SRCDIRS.

branches: 1.19.4;
Relegate edlabel to use in extremely memory constrained install
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Fix indent on common/protocols changes.

branches: 1.16.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.14.12; 1.14.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Remove "srcdir distrib/utils/x_mount" from ramdisk lists
since src/sbin/mount/Makefile no longer links fs specific routines.

Now that usr.bin/ftp/Makefile supports SMALLPROG and SMALLPROG_INET6,
we don't need distrib/utils/x_ftp anymore...

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

remove bin/echo; it's builtin to bin/sh
consistency cleanup

as this uses libhack, copy in a useful etc/master.passwd rather than
an unused etc/passwd

don't need x_sh in NDWO

- use ${_SRC_TOP_} instead of ${CURDIR}/../../../ [../../]
- fix IMAGEDEPENDS; it should contain at least all the COPY items from list

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

Use the real versions of protocols(5) and services(5) instead
of inferior home-grown ones.

Back up one more level to get etc/netconfig

branches: 1.3.2;
Need /etc/netconfig.

Fix listfiles to handle object directories. Patches supplied by
Izumi Tsutsui in PR misc/7628.

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.

branches: 1.2.38;
rename (revert) memory disk filename /dev/mdX -> /dev/mdXa

mvme68k installation ramdisk config files.

as this uses libhack, copy in a useful etc/master.passwd rather than
an unused etc/passwd

mvme68k installation ramdisk config files.

Use the real versions of protocols(5) and services(5) instead
of inferior home-grown ones.

branches: 1.1.10;
mvme68k installation ramdisk config files.

Use the real versions of protocols(5) and services(5) instead
of inferior home-grown ones.

branches: 1.1.10;
mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.

s/Partititon/Partition/

Relegate edlabel to use in extremely memory constrained install
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change

branches: 1.3.42;
The 167Bug> boot command line was not quite correct.

branches: 1.2.2;
Updates for MVME167 support.

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

partiton -> partition

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.

Use the new makefs(8)-based ramdisk build procedure to build
the installation/recovery boot image.

mvme68k installation ramdisk config files.