Distribute the MICROVM kernel on amd64 and i386.

See sys/arch/{amd64,i386}/conf/MICROVM for usage instructions.

branches: 1.187.4;
Various style fixes (and some of VAX related errors and copy&pastos),
from Mouse on tech-install.

s/MRCOFFE$/MRCOFFEE/ and s/MRCOFFE_OFW/MRCOFFEE_OFW/ in install docs.
Also apply uwe change from sparc/contents s/GENERIC-KRUPS/KRUPS/.

branches: 1.185.6;
Document DHT kernel for evbppc.

alpha: GENERIC.MP is no more

ancient ARM stuff

s/developement/development/

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.178.2;
Remove leftovers from the separate xen port (which is now part of i386
and amd64)

Distribute GENERIC_KASLR on amd64.

Remove netbsd-INSTALL_XEN3_DOMU.gz (it doesn't exist anymore), and add
netbsd-XEN3PAE_DOM0.gz (has always existed, but was apparently forgotten).

Retire the non-PAE-i386-PV configuration files. Keep only PAE-i386-PV.
Non-PAE has been dropped years ago by Xen.

The content of XEN3_* is merged into XEN3PAE_*, with "options PAE" set.

branches: 1.174.2;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.172.2;
Remove port-acorn26

OK core@

branches: 1.171.8;
Nuke the five(!) install floppies. Welcome to 2015. Approved by
dsl@, Master of Port.

branches: 1.170.20;
Bump MV2120 SYMTAB_SPACE.
Add kernels variants for root on the primary partitions of "Drive 1".
Add MV2120 to evbarm release.

Note kern-SHEEVAPLUG.

branches: 1.168.4;
Remove sizes of set files. They were too hard to maintain,
while nowadays few users care about bandwidth or storage
in modern Internet environment. Ok'ed by snj@ a while ago.

altboot.img: altboot as U-Boot image to fake a Linux kernel module

Reflect reality for i386 distrib kernels.

Sandpoint bootloader was renamed from netboot to altboot.

branches: 1.164.2;
XEN2 kernels are not part of the release any more. Support was removed
with NetBSD-6.

Improve wording.

Add INSTALL.{html,more,ps,txt} for bebox.

Follow rename of distribution kernels in binary/kernel:
netbsd.ecoff-GENERIC32_IPXx.gz -> netbsd-GENERIC32_IPXx.ecoff.gz

Adapted sysinst and installation docs for modern NAS boxes.

Sync evbppc contents with reality.

Build the "MONOLITHIC" kernel configuration by default and include
in the release.

Using the modularise "GENERIC" kernel on an existing NetBSD 5.0 system
is difficult and error-prone. The "MONOLITHIC" kernel provides an
easy way to test a new kernel or to upgrade an existing system.

Revert previous per comment from ad@ in PR 41668, which is no longer orphaned.

Add MONOLITHIC kernel to i386 release binaries. PR#41668

Final round of INSTALL cleanups for 5.0.

Yet another round of INSTALL fixes.

Another round of INSTALL improvements big and small.

Remove some rubbish

Various updates to the INSTALL notes in preparation for 5.0. Changes
are still to come.

Note that sgimips switched to X.Org, and drop the "7.3" as what we have
doesn't really follow any X.Org release.

branches: 1.149.2;
Various updates to the install notes.

Switch evbpcc sysinst and install notes to referencing WALNUT/OPENBLOCKS266
kernels, rather than (nonexistant) GENERIC

from KIYOHARA Takashi

Move ATARITT and FALCON to the main list of kernels

- Sync atari sysinst install kernel list with reality:
- BOOT reanamed to SMALL030
- ATARITT and FALCON were missing
- Update release notes to kernel list and also clarify Milan kernels

Follow up the rename of BOOT to SMALL030, and the removal of BOOTX.

Update for Xorg, add 'z' to a tar command, and remove a sentence that
shouldn't have escaped its conditionalized branch.

branches: 1.143.2;
Remove obsolete description for old xen-i386 port. Ok'ed by bouyer@.

Fix a warning on sparc64.

Fix a warning and formatting on sgimips.

Fix two typos.

branches: 1.139.2;
For PR kern/38537:

- Make MULTIPROCESSOR mandatory on i386.

Installation changes:

- Update installation section of release notes to match reality.
- Rename INSTALL to INSTALL_FLOPPY, retire INSTALL_LARGE.
- Build INSTALL kernel from GENERIC, like on amd64.
- Update boot menu to allow disabling ACPI and/or SMP.
- Remove GENERIC.NOACPI from the installed kernel list.
- TODO: install default boot.cfg in etc.tgz.
- TODO: possibly enable PCI fixup stuff at runtime if ACPI is disabled.

Build changes:

- No longer build ALL, it's for verification, is slow to build and the
build process is already crippled by the number of kernels built.
- No longer build GENERIC.NOACPI.

Convert TNF licenses to new 2 clause variant

branches: 1.137.2;
Update supported hardware, add new kernel sets.

branches: 1.136.2; 1.136.4; 1.136.6;
Remove support for NetBSD/pc532.

add a space between "NetBSD" and the version number.

Our xsrc is based on XFree86 4.5.0, not 4.4.0. Applies also to the
netbsd-4 branch and to all 3.x releases thanks to a pullup.

Update URLs after website reorganization. patch by OKANO Takayoshi, from
PR 37070.

update set sizes

remove a leading .\& which nroff does not like. OK by lukem@.

-GENERIC_DIAGNOSTIC

Part 1 of pmppc removal as a port. (the machine is still supported, but
now under the evbppc port)
Note, have not touched the set lists yet, as I would like to preserve the
manpages.

Update sgimips kernel names.

Several update for ews4800mips.
XXX: set sizes should be updated by list-setsizes.sh

branches: 1.126.4; 1.126.6;
Sync the list of kernels with reality. We don't have GENERIC_TINY,
GENERIC_PS2TINY, INSTALL_TINY, INSTALL_SMALL, INSTALL_PS2 anymore.

Add infos about ACPI (now enabled by default) and cdrom images.

Remove support for NetBSD/{,evb}sh5.

branches: 1.123.2; 1.123.4;
dsl says: "you need to use .ie not .if if you want to use .el".
This makes missing descriptions of the misc/ directory appear in the
output.

Fix previous: xfont is also needed by X clients.
Thanks tron@

* Clarify that the xfont set is only needed by the X server
* simplify commands to extracts sets & pkgsrc
* add spaces around \(em - why this isn't rendered as — is far
beyond me, can someone with *roff fu have a look?

Inspired by posting by James K. Lowden on netbsd-docs.

XXX the hardware list needs real work. :(

Remove mention of wscons-specific kernels on acorn32 -- all acorn32 kernels
now use wscons.

Update to describe the set of kernels we actually ship on acorn32.

.Nx should be on a line by itself.

Trailing comments are introduced with \" not .\"

Add an amd64 'Quick install notes for the impatient' bit, and
touch up the amd64 directory structure.

Reference siop(4) not ncr(4)

branches: 1.114.2;
Small correction to macppc X server info

Clarified a few details about installing 32 bit sparc distribution on
sparc64 systems.

Oops, hp300 miniroot doesn't have sysinst -- only the ramdisk kernel has it.

Update hp300 info, shifting info to correct location.

sparc64 X server no longer has problems with pixmaps.

Add mention of the xetc set; configuration files for X which could be
locally modified.

Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

Add two missing closing curly braces. Should fix atari release notes.
jdc@ ok.

Fix cut'n'past-o from last change

* Update lots of set sizes
* Merge paragraph for various arch's 'xserver' set, so the size
can be added after that paragraph in one block for all archs.

Todo:
* Where is the 2.0 amd64 snapshot on releng.netbsd.org ?!?
* Portmasters, update your kernels and other MD stuff in here!
* Set sizes (all sets) needed for: hp700 sun2 xen-i386 (see "XXX old")
* Various kernel sizes

Language nits, by soren.

* Some wording fixes, move some text where it belongs
* document what netbsd-GENERIC_DIAGNOSTIC is
* i386: the X-server most likely wanted is XFree86
* sparc* ship Xvfb in the xserver set, not Xprt
* no split sets, not even on i386. For now(?)

Todo:
* Where is the 2.0 amd64 snapshot on releng.netbsd.org ?!?
* Portmasters, update your kernels and other MD stuff in here!
* Set sizes need updating (automation?!? or remove them?)

mrg@ says all platforms use XFree86 4.4.0

Mention that sparc64 users can install 32-bit sparc distribution

Fix distribution sizes for macppc, sparc, and sparc64
Add some missing info for macppc, sparc and sparc64

rewording of sparc64 installation tools

Add NetBSD/xen documentation.

branches: 1.97.2;
Remove references to xcontrib and xmisc now that they've been merged
into xbase.

More JavaStation setup instructions.
XXX - someone please demangle the common/netboot maze and fix the markup ;-)

- fix some typos (netsbd.org -> NetBSD.org)
- add trailing slashes to URLs where appropriate
- netbsd.org -> NetBSD.org

update sparc subdirectory structure to match reality

hp700 and next68k don't ship with X clients or server
add estimated hp700 distribution file sizes

include macppc netbsd-GENERIC.MP.gz which supports SMP

more detail on the macppc X server situation (Xmacppc vs. XFree86)

mention macppc has two floppies now

The walnut port has been subsumed by the new evbppc port.

XXX: There is some work to do here to allow for different
installation notes for different eval boards...

Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

refer to 1.2MB diskettes

minor tweaks for shark. (XXX: still some things to chaseup)

remove duplicate entry for netbsd-GENERIC.gz.
noted by Remi Zara in [port-mac68k/18196]

shark also has netbsd.aout in kern-GENERIC

Make what should have been a .gz really a .gz (not a .hz)

update xset sizes for vax (from matt@)

hpcsh does not have X at the moment

update sparc & amiga x set sizes

loadbsd doesn't work for ELF kernels.

sun2 doesn't have x server or clients at this time

update mac68k xserver size

Add sgimips-specific file lists for installation and binary/kernel dirs.

Fix size of the pmax Xserver set.

Some minor touchups/rewordings/clarifications.

macppc/powerpc x set size updates

update sizes of alpha x sets (info from havard)

- provide .showsize [<G> <U>] to display set size info.
if <G> and <U> aren't provided, use values from last .setsize <G> <U>
reset sizes upon display
- convert to .showsize as appropriate
- fix .el ... .ie
- fix up a bunch of set sizes
- use '-unknown-', '-unset-', and '-unknown-machine-arch-' to flag
unknown set size info (instead of "???")
- consistently use \n[MACHINE] instead of r_MACHINE
- ensure that all MACHINE_ARCH registers are at least defined to 0
- don't bother setting register _\*M

This is a complete refit of the mac68k documentation.

Of particular note is documentation on the new preferred method of
installation using sysinst, provided (and updated) by Bob Nestor.

r_mips is not valid; use r_mipseb or r_mipsel. noted by rafal on icb

Update sgimips portions of release notes to more closely match reality, esp.
after the removal of the kern-GENERIC set from sysinst. While here, fix up
some minor things (wording, bad markup, typoes) in the non-sgimips specific
common portions.

Replace "filesystem" with the correct phrase, "file system."

- update alpha sizes (for base system; haven't built xsrc yet)
- fix a couple of minor mdoc issues

define new macro - ".setsize x y" - to print "x MB gzipped, y MB compressed"
and update various size displays appropriately (based in information
obtained from latest autobuild).

XXX: alpha info is now missing, as well as a bunch of x11 sets for
various platforms.

consistently use Ic for sysinst

_ copyright crank
- whitespace cleanup
- formatting cleanup (start sentences on new lines)

Update for cats.

Fix sgimips typo while I'm here.

Mention acorn32 where appropriate.

Add walnut installation notes.
Information to fill them mostly provided by eeh and simonb.

Fix some random buglets I stumbled over.

Add install notes for newsmips.
Written by NAKAJI Hiroyuki <nakaji@tutrp.tut.ac.jp>,
and some minor tweaks by me.

in distribution set description section, indentation is too deep and unreadable.
make it a bit easier to read (with penalty of overwraps).

Someone moved the macppc boot floppy image in the distribution set to
installation/floppy/boot.fs without updating the docs.

fix bogus next68k include

An other bunch of Atari doku fixes.

Some atari updates.

sgimips-specific changes:
* describe kernels
* remove misc/
* add netboot/

branches: 1.52.2;
Update macppc filenames based on files in latest snapshot (20020407).
That is, netbsd.ram.gz becomes either netbsd.INSTALL.gz or
netbsd.GENERIC_MD.gz depending on what media (and Open Firmware version).

Also, a few minor rewordings to clarify a little better.

Some changes to the sun2 distrib docs to reflect reality.

Added descriptions for hpcboot.exe.
Fixed values of file size and memory requirement.
Added PenCentra 130 and Sigmarion(II) in supported machine list.
Added Vr4122 and Vr4131 in CPU list.

mention there currently is no X server for next68k

- only describe the floppy directory if floppies are supported for machine
- the kern set has grown an extension
- add new kernels for hp300

Purge mentions of NetBSD/arm32.

Rename mvme68k's ramdisk kernel from "netbsd-rd" to "netbsd.RAMDISK".

s/netbsd.GENERIC.gz/netbsd-GENERIC.gz/
some updates for hpcmips.

Add a brief discussion of the MD bits of the acorn26 release tree.

Add non-X gzipped set sizes for acorn26/arm.

Rename arm26 -> acorn26.

Remove INSTWDCPCM, because for a while now, GENERIC (and INSTALL) have
included both pcmcia support, and wdc instead of idesc as the driver for
the Amiga internal ATA connector.

Added sun2 content to the release notes.

mention GENERIC_PS2TINY for i386

update sparc64 (and some generic) set sizes to reality (gnu.tgz is
*much* larger for sparc64 now! :-). remove the notes that PCI kbd/ms,
sbus audiocs, and fas support don't work because they now do.

mention i386 INSTALL_PS2

Minor spelling fixes.
auxilliary -> auxiliary
concatinate -> concatenate

Update mvme68k/m68k (and some MI) set sizes to reflect -current reality.

Cardbus => CardBus
X window system -> X WIndow System
Remove recommendation that upgrading install etc
set by hand.

Update copyright date.
"laptop" is not a proper noun + grammar.
"NetBSD's" is ".Nx Ns 's".
correct spurrious wrongly-marked up emdash to a semicolon.

Add two new mvme68k-specific kernels (for mvme172 and mvme177).

Document the Amiga INSTALL and INSTWDCPCM kernels.

Several changes to our release notes, OK'd by Luke Mewburn:

* mention additional kernels in binary/kernel/ dir: GENERIC_LAPTOP, etc
* note that we also include firewall software (besides X, ...)
* don't Xref the BUGS file, as it's gone
* update some file sizes (source .tgz files) to match BETA2
* mention that syssrc contains the source for all architectures
* Sysinst now allows setting root password and timezone - note that.
* Explain how to actually install binary packages, giving some
examples that people may want to install.
* Mention rawrite32 near rawrite.
* Don't show preparation of install tape on i386
* update i386 hardware a bit. This needs to be generated automatically...
* Many minor nits & typos.

.Li kernel names

Bring these up to date WRT reality. In particular, the disk-space
requirements were somewhat insufficient, and MVME162 was nowhere to
be seen.

branches: 1.27.2;
Update pmax set sizes from the 1.5_BETA build.

more cleanups
- fix up sizes for various sets based on info from tv@ (any errors are
probably due to my conversion rather than his data)
- .Ic commands, .Pa paths, .Tn trade names

correct xbase and xcontrib sizes of mips.

update hpcmips and mips set sizes (unpacked on 8K/1K ffs).

Added Amiga unpacked set sizes.

Update size of news68k binary sets.

change "VR41xx" to "Vr41xx".

update for hpcmips.

- move arch setting logic from main -> macros, and change as follows:
- define string `A' to contain the arch name (defaults to the port
name)
- define registers \*A and _\*A if
- deprecate _FOR_RELEASE, and just use FOR_RELEASE

migrate */contents -> common/contents, as there was *way* too much
unnecessary duplication. wrap the MD stuff in .if r_foo \{\ ... .\}

* Delete sun3x from SUBDIR
* The merged contents file didn't work out, so nuke it and put it back
into each port directory. Most still have the now-pointless conditionals;
these now should be deleted.
* fix alpha, amiga, and arm32 to delete the maze of twisty little conditionals

Add sn3 stuff. (This file is gross...)

Add pmax kernels.
Update available set sizes to current reality.
Remove comment about sysinst not being able to install X sets.

Update mac68k set sizes for 1.4

Atari X11 related updates

Add macppc part.

Add list item and description for installation/instkernel/ [netbsd.gz]

Fill the x68k-specific portion.

First round of corrections for the atari.

branches: 1.8.2;
Edit alpha installation section.

Fixup atari set sizes.

Fill in sparc distribution set sizes.

update file sizes, fix X references

Add i386 distribution set sizes. Add xserver set description.

Update mvme68k sections for MVME167 support.
Also move Chuck to "Developers" and myself to mvme68k port-master.

1) Remove all vestiges of tar from src/distrib. Use pax and appropriate
commandlines for all tar operations. (work supplied by Matt Green)
2) Update arch/*/md.c to deal with new sysinst/run.c. Special case
anything that needs to do a redirect or a pipe.
3) #if 0 some unused code in target.c. This code will need to be updated,
or special cased with do_system.

Big thank you to Matt for all his work on this.

Give the common install notes components their own subdirectory.
Also, alpha and i386 now use a single merged common/sysinst,
and arm32 and sparc have a single merged common/xfer.

Remove the list of donations, which was not updated since 2004. We have
up-to-date lists at http://www.NetBSD.org/donations, so add this link
to the release notes. OK by Christos.

branches: 1.26.2; 1.26.6; 1.26.8;
merge old list and what's in htdocs/donations
(and mailed finance-exec@ the diff to commit :)

merge in data from htdocs/donations/200*.xml
XXX Would be nice to have this all in one place...

branches: 1.24.2;
This is a complete refit of the mac68k documentation.

Of particular note is documentation on the new preferred method of
installation using sysinst, provided (and updated) by Bob Nestor.

crank copyright

add me

branches: 1.21.2;
Revert 1.20 for now. The two column macro is clearly still buggy and
not ready for prime time. Too bad. So much for aesthetics.

Use .Bc/.Ec local macros for two-column formatted list.

Add Precedence Technologies Ltd, who gave me a Risc PC and an Acorn NetStation.

Entered my name (Reinoud Zandijk) to the relevant files

Add Salient Systems Inc.

Mention Whitecross Database Systems, who have donated hardware to the
NetBSD project.

whitespace cleanup

update copyright

branches: 1.13.4;
Add folks that have given me stuff.

Add Eric and Rosemary Spahr, who have donated some NeXT equipment which
will go to the build lab.

Sync with htdocs.

Added myself. (Donated money recently.)

branches: 1.9.4;
Add my name to the list of developers, and the list of donations (cash for NBFTP).

note my name (486/33, cash for nbftp)

added Dave Rand, AboveNet, Warped Communications

Add VMC

update sponsor list from WWW page. split into individual and organization section, like there.

branches: 1.4.2;
Added myself, fixed sorting.

add Piermont Information Systems

add me

Give the common install notes components their own subdirectory.
Also, alpha and i386 now use a single merged common/sysinst,
and arm32 and sparc have a single merged common/xfer.

Translate Lule} to troff's Lule\(oa.

Add xsrc to the invocation example.

Drop the final quote if followed by dot.

Recognize ad clause in CMU PPP and some OpenSSL code.

Use "n" (grouping doesn't capture) when matching $ack* regexps to
alleviate performance hit a bit.

Special-case badly worded ad clause in src/sys/lib/libkern/rngtest.c

Fix typo in regexp to detect m4 comments.

Detect more ad clauses, pick more duplicates.

If there are notices that differ in the final dot, prefer the version
with the dot. Sort "by the" enries after all other "by Name" entries.
With the corresponding re-ordering of the legal.common the output of
this script is getting useful again.

Don't use an undefined variable.

Fix ISO-646-SE spelling of Lule\[oa].

Collapse multiple spaces between words.
There are a few entries with "by__Name" that affects sorting.

branches: 1.14.62; 1.14.64;
Fix sh/perl/etc comment post processing.

More "known bad" formattings of 3 clause UCB license.

Avoid an endless loop in previous, improve extraction of "known bad"
UCB 3 clause licenses.

Better support for "strangely" formatted 3 clause UCB licenses

Reorder postporcessing: move the more intelligent transformations first,
then the dumb replaces.
Special case the openssl mkerr.pl script which has code that prints a
license.

add usage message, rework a few comment types

Adjust detection of trailing dots to the recent changes of not having
a terminating \n in the copyright list.

Add a xml/docbook output mode

Do a better job eating "empty" lines at the start/end of C++ style comments.
Remove trailing linefeed from the collected messages (and add it at
output generation).
Add a simple html output mode.

Hubert kindly assigned copyright to TNF, so apply the new standard 2 clause
license.

Remove quirks for fixed or removed parts of the tree.
Add C++/C99 comments.

branches: 1.3.12; 1.3.14; 1.3.16;
Spell "separate" correctly. From Zafer Aydogan.

branches: 1.2.2; 1.2.12; 1.2.14;
Use '#!/usr/bin/env perl' instead of hardcoding the path.
Fix some typos.

Recreate complete(?) list of all advertizement clauses, extracted
from 2.0 src and xsrc with the extract-contrib-string.pl script.

No Ben Gray BSD 4-clause licenses remain in the tree.

Thanks Daan Vreeken for agreeing to drop his advertising clause.

icp(4): Sync copyrights with OpenBSD's gdt(4), which this is based on.

Thanks Roger Hardiman for very quickly agreeing to the removal of
the advertising clause from his license.

Marcus' name can be removed from the list now.

thanks thorpej!

Remove the advertising clause from Paul Mackerras's license.

Thanks Paul for agreeing to this.

rgrimes at freebsd gave permission to relicense to 3-clause BSD
in a private email.

The email in question has been forwarded to board@.

no code from Boris Popov remains in the tree

jared dropped his advertising clause

Fix typo

Reported by vezhlys on IRC.

Drop the entry for Yasushi Yamasaki, per recent ad clause removal.

Drop entries for "Scott Bartram and Frank van der Linden" and "the
University of Illinois at Urbana and their contributors". They are
not referenced anywhere in the tree.

Add a comment to the entry for Computer Systems Laboratory at the
University of Utah. It's missed by the extraction script b/c of the
non-standard formatting of the ad clause.

Move the entry for Caldera to its proper place in the sorting order.

Use troff \(xx names for the few accented characters we have here.

Extraction script outputs them literally, but some of them are in
utf-8 and some in latin1. While here also use \(:o for Bodo Moeller
name as instructed. Lule\(oa is now emited by the extraction script
directly.

This gives us the right characters in PostScript and HTML output. In
text output they are transliterated with -mtty-char.

Fix the enry for Computer Systems Laboratory at the University of Utah
and move it to its proper place in the sorting order.

Move the entry for CMU Computing Services to its proper place in the
sorting order. Add more ad clauses from CMU ppp code.

This product includes software developed by Ravikanth.

Swap Per Fogelstrom entries. Missed in previous.

Sort entries "by Foo." before "by Foo and" etc. Sort the section with
"for the NetBSD" notices that had a lot of entries out of order. Drop
final dots that are not in any of the required notices to reduce diff
with the script output.

Move entries with short first line that ends with "by" to their proper
places in the sorting order.

Restore entries for "K. Kobayashi" and "K. Kobayashi and H. Shimokawa".
The script missed them as it was confused by the slighly non-standard
license wording. My apologies.

Restore the entry for Yasushi Yamasaki - it comes from xsrc,
my apologies.

Drop the entry for "University of California, Berkeley and its
contributors, as well as the Trustees of Columbia University" that was
required by the ad clause in external/bsd/am-utils/dist/COPYING.
The ad clause was dropped in the versions we have since netbsd-8.

Drop the entry for Yasushi Yamasaki. Nothing in the tree requires it.

Move the entry for Kyma Systems to its proper place in the sorting order.

Drop the entry for David Muir Sharnoff. It was for expn(1) script in
am-utils that was never installed and is no longer there since netbsd-8.

Drop the entry for Thomas Gerner.

thomas@ dropped clauses 3 and 4 from his license back in 2009 and the
entry was dropped from here, but a copy was forgotten in the atari
port-specific legal file and merged back here in 2015.

Drop the entry for Texas A&M University.
Nothing in the tree has its ad clause.

Move the entry for Matthew Fredette to its proper place in the sorting order.

Drop entries for "K. Kobayashi" and "K. Kobayashi and H. Shimokawa"
that are no longer referenced in tree.

Add entry for Cisco for the SCTP code.

Add entry for Ben Gray.

Collapse multiple spaces in an entry (doesn't affect sorting).

Move the entry for Mika Kortelainen to its proper place in the sorting
order after fixing multiple spaces.

Move Intel's entry to its proper place in the sorting order.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.98.10; 1.98.12;
remove me.

there are no copyright/license statements from "Terrence R. Lambert"
requiring attribution any in our tree any more.

remove it from our list here.

bah. this time without a typo.

restore rcsid accidentally deleted in previous

merge port-specific legal sections into the common file. most of these
entries were already in the common file, and it's a pain to maintain
them separately.

first pass de-suckification for 2015. modernize content a bit, fix dirty
rotten lies, improve wording, sync legalese with reality, yada yada yada.

branches: 1.92.20;
Remove my (isaki@) acknowledgement.

branches: 1.91.4;
Sync: no more chuck@ et al clause.

Another one bites the dust.

Remove HAYAKAWA Koichi's acknowledgement.

Remove two different explorer@ acknowledgements.

Argh. Missed another now-unnecessary mhitch@ acknowledgement.

Three ad clauses down: one for mhitch@ && is@, and two for mhitch@.

Another acknowledgement down (is@).

Two acknowledgements down:
- Michael Shalayeff
- Tobias Weingartner

elric's ad clause is no more.

hubertf's ad clause is no more.

Brad Grantham's acknowledgement is in mac68k and macppc.

briggs' acknowledgement is in mac68k and newsmips, where it belongs.

Matt DeBergalis' acknowledgement is now in mac68k and next68k only.

scw's ad clause is no more.

Remove Ichiro FUKUHARA's acknowledgement.

cl's ad clause is no more.

Jukka Marin's acknowledgement is in amiga/legal, where it belongs.

Remove "Ian F. Darwin and others"

Remove entry for Gordon W. Ross (the "Gordon Ross" entry has to stay
for now, though).

Dale Rahn's ad clause is no more.

Remove Brad Pepers' acknowledgement.

Remove attribution for Gordon W. Ross and Leo Weppelman.

Remove soren@ and Onno van der Linden's acknowledgements.

Remove Todd C. Miller's acknowledgement.

Remove acknowledgements for leo@ and thomas@.

jmcneill's ad clause is gone.

Remove one of christos' ad clauses.

reed@ no longer has any ad clauses in the tree.

nisimura and reinoud's ad clauses are no more.

Mats O Jansson's ad clause is no more.

Remove the "Mats O Jansson and Charles D. Cranor" acknowledgement.

David Miller's entry is already in ../sparc/legal, where it belongs.

bouyer's ad clause is no more.

Eduardo Horvath's ad clause is no more.

Prune Pfaller.

adrianp's ad clause is no more.

agc's ad clause is no more.

Kill two duplicate lines.

Move Microsoft out of legal.common and into evbarm, where it belongs.
I forgot to do this when I added it in 1.52.

Sync with (a close approximation of) reality.

branches: 1.51.2; 1.51.4;
Explicitly disable hyphenation for opengroup.org's URL in INSTALL.txt.
(src/distrib/notes/common/main rev 1.388 doesn't seem to work properly)

change licence of my old code to two-clause BSD licence
remove my name from advertising list

No need to explicitly mention my name here any longer.

branches: 1.48.2;
Convert TNF licenses to new 2 clause variant

branches: 1.47.8; 1.47.10;
Remove me from the mumbo-jumbo list now that I use a two-clause style
license in all my code.

branches: 1.46.4; 1.46.6;
Move my entry after the ones sorted in alphabetical order.

Add myself.

branches: 1.44.4; 1.44.6;
Spell Kungliga Tekniska H\(:ogskolan using escape sequence.

Clarify "{Product_Name}" -=> "NetBSD", as advised by The Open Group

Add text requested by term (b) of
localsrc/legal/TheOpenGroup/TOG_LICENSE

Add missing T:
"T"his product includes software developed by the PocketBSD project
and its contributors.

Add trademark notice.

Add Caldera acknowledgement.

add advertising clause for Marshall M. Midden - updated afterboot(8)

Change copyright to 2-clause BSD-copyright.
Changed with explicit permission of Thorsten Lockert (tholo sigmasoft com)

fix a few markup nits

Recreate complete(?) list of all advertizement clauses, extracted
from 2.0 src and xsrc with the extract-contrib-string.pl script.

branches: 1.34.2;
John Brezak (now jbrezak at windows dot microsoft dot com) kindly
agreed to remove advertising clause from his code, so update
the licence accordingly.

one less

Shingo WATANABE has kindly consented to remove advertising clauses
from his code.

add advertising clause for Shingo WATANABE (udav*)

add Boris Popov acknowledgement - smbfs code

Fix silly typo.

new CMU boilerplate (4th clause)

update copyright date

branches: 1.26.2;
use .It for formatting legal section.

add NRL advertising clause

Hello. Did YOU know that
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
? Well, it's true. From sys/dev/acpi.

Add "Mark Brinicombe for the NetBSD Project", from dev/ic/seeq8005.c.

Add William Allen Simpson (for primes.5).

Fix after-period spacing issue with "NetBSD Foundation, Inc. and its"

Fill the few lines that could manage it to 80col for better
source readability.

Update copyright date.
Remove .Pp between items. Now runs
as one long paragraph, and takes 2x less space. This is fine
because each item was a single sentence anyhow.

Euhm... i made some spelling errors (thanks Chris) .. more in anticipation
of commits I must admit and I thought it was mandatory when committing...

Entered my name (Reinoud Zandijk) to the relevant files

add Hauke Fath.

Add another.

whitespace cleanup, and use .Pp instead of blank lines

update copyright

Add some missed acknowledgements.

add IIJ's advertising clause (sh3disasm.c)

add attribution to ISC and UOregon - usr.sbin/pim6{dd,sd}

add attribution to the following people.
- Eric Young (eay@mincom.oz.au) - sys/crypto
- OpenSSL project - crypto/dist/openssl

This product includes software developed by Manuel Bouyer.

This product contains software developed by Niels Provos.

branches: 1.6.2;
backout previous my change (move legal notice of wjolitz from i386 to common),
since
- it broke context of sentence in i386 port.
- it seems to better to have port specific legal notice in
port specific place from maintenance point of view.

move legal notice of William F. Jolitz and TeleMuse from i386 to common,
since this is now referred from arc port, too.

This product includes software developed by Hubert Feyrer for
the NetBSD Project.

add more legal MJ

branches: 1.2.2;
add copyright info for LMC, and myself (which I missed before)

Give the common install notes components their own subdirectory.
Also, alpha and i386 now use a single merged common/sysinst,
and arm32 and sparc have a single merged common/xfer.

Remove list-portmasters.pl script.
We dropped that list from "main" some time ago.

branches: 1.6.50; 1.6.52;
Hand over copyright to TNF

branches: 1.5.12; 1.5.18; 1.5.20;
match website re-org

branches: 1.4.4; 1.4.6;
Update this script so it works correctly with the current format of
http://www.netbsd.org/People/port-maintainers.html .

Also, clarify some comments, escape a backlash so that the correct
macro for � is generated, and make sure it's substituted everywhere
in the name.

This script is still not perfect - it will produce incorrect output
the first time that the second portmaster has a hyperlink associated
with his name. For now, though, it generates correct output for
what we've got.

branches: 1.3.2;
Add copyright

Use '#!/usr/bin/env perl' instead of hardcoding the path.
Fix some typos.

Script to help create list of portmasters from webpage.

finish removing the set size stuff, which was thrown out four years ago.

branches: 1.7.4;
Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

branches: 1.6.6; 1.6.12;
Add INSTALL.{html,more,ps,txt} for bebox.

Hand over copyright to TNF

branches: 1.4.2; 1.4.6; 1.4.12;
- update instructions
- update to match current layout of arch dirs

Part 1 of pmppc removal as a port. (the machine is still supported, but
now under the evbppc port)
Note, have not touched the set lists yet, as I would like to preserve the
manpages.

branches: 1.2.4;
Remove support for NetBSD/{,evb}sh5.

branches: 1.1.2; 1.1.12; 1.1.14;
Script to calculate compressed/uncompressed size of a set, for all
architectures listed in the "ports" variable of this script.

s/dependancies/dependencies/ and s/independantly/independently/ in comments and
distrib notes.

Improve table of contents.

For .txt and .more drop meaningless page numbers, those formats are
not paginated (with all due respect to line printers, 80s are over).

For .ps use actual formatting with proportional font and properly
aligned page numbers. Thanks to kre@ for his help with some of the
darker corners of troff (with all due respect to my 80s self, he/I
should have paid more attention).

Oops, fix typo in .el in previous.

Provide separate .Tc and .Ti definitions for HTML and non-HTML.

Change HTML definition of .Tc to enclose TOC into simple .nf/.fi that
also give us <pre> in the output.

This frees our hands to redefine non-HTML case to use better
formatting (work in progress).

Don't emit page numbers in TOC for HTML, they are meaningless.

Fix typo in register name in previous.

Use .open/.write instead of .tm to emit TOC.

Don't repeat the TOC file name, define a string.

Don't open-code .tm calls to emit TOC entries.

Hide it in an .mktoc macro so that we can switch the way we generate
TOC more easily.

Add missing backslash at the start of conditional input.

That avoids an empty line in the input (which didn't look empty, but
for troff it really was) that causes a break.

I don't remember enough linear algebra to understand what happened,
but that also fixes off by one in some page numbers in the TOC.

Make .Te and .To also emit .Ti with quoted arguments.

I missed them b/c I tested on sparc notes and sparc/install is stuck
in the 90s and doesn't include common/sysinst. Now that all emitted
.Ti have properly quoted arguments we can revert TOCPROC to simple
grep.

While here convert .Te and .To to also use $* so we we can also drop
quoting from their calls in common/sysinst now. Don't actually drop
those quotes yet though, as we probably can further simplify the call
sites by emitting the headings automatically instead of duplicating
them.

More cleanup:
- simplify TOC handling and remove arg limit (from uwe)
- use Lk with explicit anchor text in some places
- do not allow official release builds when we can not derive the
proper date from the buildid

branches: 1.43.4; 1.43.6;
Remove port-acorn26

OK core@

finish removing the set size stuff, which was thrown out four years ago.

first pass de-suckification for 2015. modernize content a bit, fix dirty
rotten lies, improve wording, sync legalese with reality, yada yada yada.

branches: 1.40.4;
Bring back the playstation2 port - now that a toolchain for it is
available again.

Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

branches: 1.38.6; 1.38.12;
Remove support for NetBSD/playstation2.

Update MACHINE_LIST and MACHINE_ARCH_LIST.

Remove obsolete description for old xen-i386 port. Ok'ed by bouyer@.

Fix warning:
>> ../common/macros:256: warning: number register `Ds' not defined

no changes in generated INSTALL docs.

branches: 1.34.2;
Convert TNF licenses to new 2 clause variant

branches: 1.33.2; 1.33.6; 1.33.8;
Remove support for NetBSD/pc532.

branches: 1.32.4;
Use Ns (no space) in definition of Ul (UNIX-like) macro,
since recent groff inserts a space before -like.

branches: 1.31.4; 1.31.6;
s/xen/xen-i386/ in MACHINE_ARCH_LIST as that's what the code below expects.

Fix my mergo when iyonix was added. (signal recieved from wizd via gavan)

Initial import of iyonix port.

The Iyonix is a desktop machine from Castle Technology, based on a 600MHz
XScale[tm] 80321 processor.

* Uses the bootloader from NetBSD/acorn32, which is now 32-bit compatible.
* Currently boots multiuser with a serial console.
* Device support is not yet complete.

With help from abs.

update copyright year, and some english nits

Add NetBSD/xen documentation.

branches: 1.26.2;
becuase -> because. From Peter Postma.

add hp700 tags and text

The walnut port has been subsumed by the new evbppc port.

XXX: There is some work to do here to allow for different
installation notes for different eval boards...

- provide .showsize [<G> <U>] to display set size info.
if <G> and <U> aren't provided, use values from last .setsize <G> <U>
reset sizes upon display
- convert to .showsize as appropriate
- fix .el ... .ie
- fix up a bunch of set sizes
- use '-unknown-', '-unset-', and '-unknown-machine-arch-' to flag
unknown set size info (instead of "???")
- consistently use \n[MACHINE] instead of r_MACHINE
- ensure that all MACHINE_ARCH registers are at least defined to 0
- don't bother setting register _\*M

define new macro - ".setsize x y" - to print "x MB gzipped, y MB compressed"
and update various size displays appropriately (based in information
obtained from latest autobuild).

XXX: alpha info is now missing, as well as a bunch of x11 sets for
various platforms.

update copyright date

- sync up MACHINE and MACHINE_ARCH register setting
- clean up whitespace

branches: 1.19.2;
Catch up with recent $MACHINE developments.

Purge mentions of NetBSD/arm32.

Add entries for arm and arm32 in the MACHINE -> MACHINE_ARCH map.

Rename arm26 -> acorn26.

Don't use CURDIR-relative .so for reading the toc, as it breaks
with objdirs.

Add .Te and .To macros for explicit additions to the table of contents.
.Te adds an entry at a specified depth and also outputs the entry name
in the output stream, .To "only" adds the entry. .To is necessaary where
markup issues prevent the use of .Te.

Remove TOC entry for Sh; there are only 3 of them and they're
all on page one and they add needless clutter. Additionally
doc2html doesn't output a tag for them, so we cannot link to them.
Lower indent level for Ss and Ss2
Add special HTML support: emit an HREF on each TOC line. There's some
nasty kludging with extending the dot-leader tab stop by the width
of the href, but that's life in mdoc2html.

TOCs need to be regenerated, but I'm not going to bother for a while.

Add a table of contents (TOC) to the release notes.
This makes it _much_ more user-friendly, as it allows users
to skip to the parts they want easily.
At present, the TOCs are generated files, and can be regenerated
with "make tocs" (probably has to be run twice to account for
the size of the table itself).
TOCs are named INSTALL.{PostScript,ASCII,HTML,more}.toc instead of
INSTALL.{ps,txt,html,more}.toc because that's what \*[format]
expands to.

Minor spelling fixes.
auxilliary -> auxiliary
concatinate -> concatenate

Why I got nothing done this weekend: Add .Bc/.Ec macros for
columnarized unfilled displays. Not perfect for every scenario,
but work fine for the intended application (common/donations).

- add .Key; format a keycap (Literal text, one point size smaller)
- add .Ul; .Ux + '-like' (aka `UNIX-like')
- remove .D2; nothing used it
- add caveat to .(disp

Fix typo. (s/cobolt/cobalt/)
Pointed out by SUNAGAWA Keiki <kei_sun@ba2.so-net.ne.jp>.

- move arch setting logic from main -> macros, and change as follows:
- define string `A' to contain the arch name (defaults to the port
name)
- define registers \*A and _\*A if
- deprecate _FOR_RELEASE, and just use FOR_RELEASE

- modify .(tag to be more generic. now takes width as first argument,
and doesn't explicitly provide a .It
- add .(bullet & .bullet), which provide bulleted/hyphenated lists.
(alternates between -bullet & -hyphen at each alternate depth).
.(bullet does .It as well.
- add .(enum & .enum); enumerated list. the former does .It as well
- add .(item & .item); enumerated list. the former does .It as well
- add .Nx*M, which generates `NetBSD/machine', except that `NetBSD'
is done using .Nx so gets the appropriate markup from that
- remove .(note and .note), leaving .(Note and .Note)
- document \*M, \*V, \*[.CURDIR]

- remove Bdlit macro; .(disp already exists
- update copyright date

branches: 1.4.8;
Add a html <name> to second-level subsection macro.

Fix header inversion caused by untracked macro package change.

branches: 1.2.2;
Stomp on those blank-line-inserting .ne requests, like Charles did
for -mdoc.

Give the common install notes components their own subdirectory.
Also, alpha and i386 now use a single merged common/sysinst,
and arm32 and sparc have a single merged common/xfer.

The default kernel on macppc installation media is now named netbsd,
not netbsd.macppc.

distrib/notes: remove space between "NetBSD -current"

branches: 1.576.2;
In the Release Contents section describing the source/sets/ directory,
remove a reference to pkgsrc sources, which were removed from NetBSD
releases in 2002 with NetBSD-1.6. Spotted by Mouse in PR install/58067.

Fetching and unpacking pkgsrc manually is covered elsewhere in INSTALL,
so nothing lost here.

distrib/notes: add back the sentence final dot after .Lk

It was omitted in previous b/c of a bug in .Lk that was fixed
in PR bin/58074

Use single-arg "Lk" macro for a link so we can get reasonable results
both in .more and .html output (still a bit odd, but better than before IMHO).

Various style fixes (and some of VAX related errors and copy&pastos),
from Mouse on tech-install.

main: minor style fix

Add note about zfs mount behaviour change in NetBSD 10

branches: 1.570.2;
Add notes about FFS and extended attributes.

Remove floppy installation instructions from sparc documentation.

Floppy generation was disabled before NetBSD 6.0 release due to size
constraints and unlikely to be restored soon or at all. PR port-sparc/56776.
ok martin.

Add pf(4) to the "list of features we plan to remove" (eventually)
list in the installation notes. Ironically, the only other thing here
is groff(1), which is used to generate these installation notes.

main: add .gz extension to .img references for consistency

main: add note about amd64 now having a "bios" image, too

main: simplify conditional markup

Consistency and typo/grammar fixes from Michael Siegel in PR 55413,
With minor adjustments.

branches: 1.563.2;
Remove Arm OABI -> EABI change notice

Override HTML <title> to something more informative.
Requested by martin@

Use .Os NetBSD/\*M \*V to get more informative footer.

"Administrivia" is a real word and it was used here on purpose.

Fix some typos.

For HEAD builds, add a small "bleeding edge" warning when we talk about
a rock solid OS.

More cleanup:
- simplify TOC handling and remove arg limit (from uwe)
- use Lk with explicit anchor text in some places
- do not allow official release builds when we can not derive the
proper date from the buildid

Improve heading a bit. While here, use quotes to group some of the
words to avoid the 9-arg limitation of .Ss

Add "Oxford comma"

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

Add missing .bullet) and replace some versions (more todo later)

branches: 1.551.2;
Omit mention of the boot prompt having an ACPI off option, as it was removed

Mention macppc 601 needs to use separate boot floppies, kernels, and specific kernel on CD

Remove leftovers from the separate xen port (which is now part of i386
and amd64)

Remove dhclient from the base system.

Discussed here:
https://mail-index.netbsd.org/tech-userlevel/2018/06/21/msg011233.html

branches: 1.547.2;
Replace references to i386 install media for Rawrite32 with
links to the homepage.

remove core list, portmaster list, releng list, and developer list.

...as proposed several times in several places back in 2009/2010.

this info can all be found on the website (where it's more accurate) and
has no place in a document describing the installation of netbsd.

rtsol(8) and rtsold(8) have been long removed.

Add myself.

branches: 1.543.2;
distrib: add myself

ok pgoyette@

prune 5.x upgrade section

Added myself.

Remove port-acorn26

OK core@

Repositioned my name according to Alphabetical Order (surname).

Add myself at the right place :-P

Added my name to the NetBSD developers list.

Add Jason Bacon to developers list

branches: 1.535.2;
update core

branches: 1.534.2;
add my name to distrib/notes/common/main

branches: 1.533.2;

Add myself

Add myself

Add myself

branches: 1.530.2;
Add myself

Add myself.

Add myself

Correct spelling of NetBSD in my entry (pointed out by leot@ - thanks)

Add myself.

add lneto

Add myself.

Add myself

Add myself.

merge port-specific legal sections into the common file. most of these
entries were already in the common file, and it's a pain to maintain
them separately.

- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

first pass de-suckification for 2015. modernize content a bit, fix dirty
rotten lies, improve wording, sync legalese with reality, yada yada yada.

Add myself

Jan comes after Jac
Noticed by bcallah AT OpenBSD Dot org

Added myself

Nuke the five(!) install floppies. Welcome to 2015. Approved by
dsl@, Master of Port.

Added myself.

Added myself

Update path to release ISOs.

Remove more rtsol references.

branches: 1.510.4;
Bring back the playstation2 port - now that a toolchain for it is
available again.

Added myself, hsuenaga

Add myself.

Add myself

Rename NetBSD/hp700 to NetBSD/hppa.

Unfortunately our VCS isn't very helpful here.

add myself

add myself

add myself

+ szptvlfn.

added myself

Add pho@ to NetBSD Developers.

Add myself

Readd myself.

Added slp@ to NetBSD Developers list.

Add myself.

add a comment about keeping this in sync with other docs

Adding myself.

Remove duplicate word (the the -> the)

Added palle@ to list of NetBSD developers

Note the replacement of kame_ipsec by fast_ipsec; this change was
originally submitted as a patch to the netbsd-6 branch, but should have
been committed on the trunk first.

Refer to the list of mirrors at http://www.NetBSD.org/mirrors
in "Quick install notes for the impatient". Previously it
said "Check the NetBSD website for details" without giving an URL.

branches: 1.489.2;
Bring MI release notes somewhat more up-to-date.

Added myself to the list of NetBSD Developers.

Added myself to the list of NetBSD Developers

Add myself.

Add an entry for myself.

branches: 1.484.2;
PR# install/44593: Please give release ISO's more meaningful names

Change release ISO filenames, what was once 'i386cd.iso' will now look
like 'NetBSD-5.99.60-i386.iso'.

ok snj@

Add ast@ to the list of NetBSD developers.

branches: 1.482.2;
Add new developer Thomas Cort (tcort)

Add John Marino to the list of developers.

Add myself

Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

Remove sizes of set files. They were too hard to maintain,
while nowadays few users care about bandwidth or storage
in modern Internet environment. Ok'ed by snj@ a while ago.

Add my name to the list.

Add myself

add myself

adding myself to src/distrib/notes/common

Added myself.

Add myself

branches: 1.471.2;
add myself

Add myself, Ryo ONODERA.

Add Makoto Fujiwara mef@, thanks

Add myself.

Adapt to newer Rawrite32 version

Add myself to the list of developers.

Add myself

.It, not .IT. Noticed by Henning Petersen in PR 43445.

- remove resigned developers
- remove "other contributors" in the time of 386BSD

XXX: probably we should simply refer htdocs/people/developers.html
XXX: rather than maintaining two independent lists

update portmaster and releng lists

Add myself

Added myself

Add myself

add myself as per the welcome email

Use http: for links to files on ftp.NetBSD.org.

Add my name, as specified in the welcome message.

Add myself

Add myself.

Remove support for NetBSD/playstation2.

Fix typo in name.

Only generate SHA512 and MD5 checksums for releases.

Update core group membership.

Add myself as requested in the welcome mail.

Fix warning, s/.lt/.It/ for list item.

Nuke some 5.0 stuff in preparation for 6.0. Sigh.

Final round of INSTALL cleanups for 5.0.

Yet another round of INSTALL fixes.

Another round of INSTALL improvements big and small.

Add myself to the list of developers.

Add ver@ to the list of NetBSD developers.

Added myself to the list of developers

Add myself to the list of developers.

restore alphabetically order for my last entry

Add myself (Jens Rehsack <sno@NetBSD.org>)

added myself to the list of developers

Under "The following issues need to be resolved manually", say that
unprivileged use of mount(8) now needs the nosuid and nodev flags.

Under "Features to be removed in a later release", try to explain what
softdep is, as well as saying that it will be removed. Say that the
WAPBL in netbsd-5 is a "preview", not an "experimental preview".

Added myself.

branches: 1.433.2;
Various updates to the install notes.

Add my name to the list of developers.

Add myself.

Added myself.

Fix a typo in an Xref to apropos.

Two wording fixes.

Add myself.

Add self.

branches: 1.425.2;
Update MACHINE_LIST and MACHINE_ARCH_LIST.

- remove rarely maintained whatis files
- wipe out changes lists for 4.0 (newer ones might be pulled from doc/CHANGES)
- list some updated 3rd party programs

Add self.

jme(4), a driver for JMicron Technologies JME250 Gigabit Ethernet and
JME260 Fast Ethernet PCI Express controllers.
Written with a lot of cut-n-paste from the FreeBSD jme(4) driver.
No support for jumbo ethernet frames yet (but should come soon).
Thanks to JMicron Technologies for providing me sample boards and
documentation for this work.

Use `\*[Am]' rather than `\*&' for ampersand.

Reformat port-maintainers list and use @NetBSD.org address as other lists.
XXX: list-portmasters.pl needs to be updated.

I guess it is about time that I added my name.

Add myself.

Add self.

Use \*[Gt] in macppc specific part.

Add landisk to MACHINE_LIST.

Revert rev 1.388 since de-hyphenation needs to be handled per item
in legal files.

Add Silke Scheler.

Fix ~empty INSTALL notes on ports which don't have
the "Quick install notes for the impatient" section.
(no one has noticed it since April!?)

Fix formatting.

Document that Xen version of at least 3.1 will be required after netbsd-5.
ok bouyer@

- add more developers per their requests
- fix one more sort botch
- fix typo

Updates to enable the iwn man page

Add myself to list of developers.

- fix a sort botch in the previous
- add some port maintainer names in the developer list too

- update port-maintainers
- sort core/port-maintainer/developer names by surname
(XXX how can this be automated?)

Add a "Features to be removed in a later release" section.
Document that Xen 2.0.x will be removed after netbsd-5, once we get
PCI pass-though support for Xen-3.

Add myself to the list of developers.

Add myself to the list of developers. Somehow, I never got around to doing
this.

Add my name to the list of developers.

add myself to the list of developers

Add myself to the list. (Should have done this months ago...)

Due to some differencies with a core member that never
wanted to help me, I'm quitting definitly from this project
on which I contributed since 2002... so remove me from
the list of developers.

Hasta nunca!

admins: feel free to remove my account and all related stuff.

Add Brook Milligan as a developer.

branches: 1.396.2;
For PR kern/38537:

- Make MULTIPROCESSOR mandatory on i386.

Installation changes:

- Update installation section of release notes to match reality.
- Rename INSTALL to INSTALL_FLOPPY, retire INSTALL_LARGE.
- Build INSTALL kernel from GENERIC, like on amd64.
- Update boot menu to allow disabling ACPI and/or SMP.
- Remove GENERIC.NOACPI from the installed kernel list.
- TODO: install default boot.cfg in etc.tgz.
- TODO: possibly enable PCI fixup stuff at runtime if ACPI is disabled.

Build changes:

- No longer build ALL, it's for verification, is slow to build and the
build process is already crippled by the number of kernels built.
- No longer build GENERIC.NOACPI.

Convert TNF licenses to new 2 clause variant

branches: 1.394.2;
fix spelling: regenate -> regenerate
OK cube

remove myself from releng

Change email address from netbsd-help to netbsd-users.
I am confused about the context of this though.

Dutifully add myself to the list

branches: 1.390.2; 1.390.4; 1.390.6;
Whitespace police.

- prepare for 5.0
- eliminate stuff specific to 4.0
- fix hp700 addition (/brick nick)
- lint

Disable hyphenation for legal block to avoid hyphens like "http://www.open-
group.org/unix/online.html".

Fix table.

Remove support for NetBSD/pc532.

Added myself. I must have forgotten to do this some years ago.

Remove a spurious paragraph break from the start of the generated
text. Bump date.

Update the number of packages in pkgsrc to match reality.

Dedicate the 4.0 release to the memory of itojun.

avoid the Fl macro because of formatting problem in the HTML output.

some updates to the "Thanks go to" section

Update URLs after website reorganization. patch by OKANO Takayoshi, from
PR 37070.

remove statement about working towards six month releases

grammar

- update from htdocs/releases/formal-4/NetBSD-4.0.xml#major-changes
- fix incorrect usage of .Lk macros
- update Release Contents
- new CHANGES.* files
- no pkgsrc
- new SHA512 checksum files
- update set sizes
- grammar
- lint
- thank WWU CS Dept. for a build cluster
- update portmaster list

Add myself to the list of NetBSD developers.

Fix formatting problems in HTML and text output reported by pavel.

Added my name to the list of developers

Add a comment after the copyright boiler plate describing how to
"regenerate" this file.

Add myself to the list of NetBSD developers.

Update the list of the core group (s/uwe/cube/).

remove Adam Glass as a developer as per his request

Note gdb 6.5 kernel crash dump & pthread debugging problems.

Fix typo, merge sentences. From Adrian S. in PR #37357.

Adding myself as per Welcome email.

Sync with NetBSD-4.0.xml 1.35, which fixes a typo in the sparc changes
section caught by pavel@.

Sync with NetBSD-4.0.xml 1.34 for the updated list of changes.

With instructions from pavel@.

bump date.

regen the list of changes from
htdocs/releases/formal-4/NetBSD-4.0.xml#major-changes, rev. 1.28.

no such user as _authpf, just a group

group rwhod -> _rwhod and add user _rwhod

sort users/groups to be manually created

add mention of _sdpd/_sdpd user/group in the compatibility section