Be less optimistic about i386 system reqirements. Remove extremely outdated
list of support devices.

Note new et(4).

Various updates to the install notes.

Fix a spelling error.

branches: 1.124.2;
Use `\*[Am]' rather than `\*&' for ampersand.

Fix whitespace.

Remove almost obsolete and useless "Unsupported devices" and
"Required configurations" sections for legacy devices. Ok'ed by bouyer@.

branches: 1.121.2; 1.121.6; 1.121.10;
add ACPI to supported items

branches: 1.120.4; 1.120.6; 1.120.10;
Add ethernet adapters driven by re(4) and wm(4) to the list of supported
devices.

Added support for Dell CERC SATA RAID 1.5/6ch

branches: 1.118.2;
Add ICH6 southbridge to list of support devices.

We support SMP these days. Noted by David H. Gutteridge in PR port-i386/28663.

pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).

Added Dell PERC 4/SC

Added DELL PERC and MegaRAID

branches: 1.113.2;
RealTek -> Realtek.

Note ICH5 support.

Add some commas in enumerations.

Note support for HPT372 and (better late than never) HPT374.

Add support for Promise Ultra133TX2, and Ultra133TX2v2.

Note ICH4 support.

Note VT8233A support.

clean up whitespace, formatting

Note Sundance ST201 support

branches: 1.104.2;
Add esiop; and rename 53c1010-33 to 53c1010 (the 66Mhz version should work
too).

Expand tabulators in .Bd -literal section, containing required irq/drq/io
settings for devices. This is so that the resulting .html file renders
as expected, instead of having the tabulated text coloumns flush against
the right margin, at least when viewed with Netscape 4.77.

Note AMD-768 support

Add Acard ATP-850/860 PCI IDE controllers to supported hardware.

Remplace ncr0 with siop0, and mention 53c1010 and 53c1510d

Note support of newer promise controllers.

Note ATAPI tape support

Add 3rd level sections to TOC (.Te), as this is so _long_.
Make "Unsupported devices" and "Required configurations" real 2nd level.

Add ESS 1688 AudioDrive card as supported (esl driver)

Add TCOM TC-400 & TC-800 to list of supported hw.
Fixes misc/7364 by Geoff C. Wing

update for recent changes in IBM PS/2 support

"Pull down" changes from the netbsd-1-5 branch. Basically re-sorts
some things and adds a few.

Boy reading this stuff is an iterative process, especially on paper.
Correct another wayward miscasing of "Plug and Play".

"Plug&Play" => "Plug and Play"
according to the verdsion 1.0A Plug and Play BIOS Specification.

AC'97 => AC97
"is follows" => "follows"

Note AMD 756 and 766 support.

Update for VIA changes in pciide.

Note that footnotes are explained after Supported devices listing.
No space before terminal sentence punctuation.
Add some more to the WaveLAN entry.
.(bullet implies initial It
s/PCMIA/PCMCIA/

Update for promise Ultra/100 support.

Add VIA VT82C686A southbridge integrated AC'97 audio
From htdocs/Hardware/pci.html.

* Sort audio drivers by alphabet
* Add Cirrus Logic CS461x
* Add ESS Maestro 2/2e

Thanks to Tatoku Ogaito <tacha@trap.fukui-med.ac.jp> for reminding me
on this.

Add CS4280 and CS4281.

Update for Ultra/100, and add ICH2

Several changes to our release notes, OK'd by Luke Mewburn:

* mention additional kernels in binary/kernel/ dir: GENERIC_LAPTOP, etc
* note that we also include firewall software (besides X, ...)
* don't Xref the BUGS file, as it's gone
* update some file sizes (source .tgz files) to match BETA2
* mention that syssrc contains the source for all architectures
* Sysinst now allows setting root password and timezone - note that.
* Explain how to actually install binary packages, giving some
examples that people may want to install.
* Mention rawrite32 near rawrite.
* Don't show preparation of install tape on i386
* update i386 hardware a bit. This needs to be generated automatically...
* Many minor nits & typos.

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

Note twe.

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

refer to the GENERIC kernel as "GENERIC" and not "generic"

cac* at eisa? reported as working.

Now that HPT370 works we can claim to support it.

Note promise Ultra/100 support.

note experimental MCA support
add [m] flag and use it for devices supported by MCA-enabled kernels

Note PCI0648/0649 support.

branches: 1.71.2;
Note HPT366 support.

Add documentation for Addonics FlexPort 8S

add Adaptec AHA-2910, 2915, 2920, and 2930C adapters (supported by ahc)

Note devices supported by cac(4).

Remove AIC-7890 from "we do NOT currently support" list.

Note support for more Adaptec SCSI cards.

Note DPT ISA support.

Add a note for RealTek 8129/8139, and remove the '[*] [+]' for the rhine, it's
now on the boot floppy.

Sync with the INSTALL kernel config file.

XXX This file should be generated automatically...

Add AdvanSys U2W boards support

Add a line about USB Ethernet adapters.

install notes for ioat66 device

sync with reality. cnw(4) and awi(4) are not in INSTALL kernel.

add wireless network adapters (cnw, wi, awi).
(is there any MI document for supported adapters?)

'Compaq Dual Port Netelligent 10/100 TX' is not 'untested' any more, I have 3
of them in a router for more than a year now :)

{aria,nca} at isa were removed from GENERIC

Note DPT support.

branches: 1.54.2;
Note Intel 82801 support.

Note Promise PDC20246 (Ultra/33) and PDC20262 (Ultra/66) support.

Add umodem device.

Add Solo-1.

Add text mentioning PCMCIA

Update this. From Izumi Tsutsui.

Mention Token-Ring cards supported by the tr(4) driver.

Also add ASUS PCI-DEC100TX+ to the list of tulip-based boards.

Another Tulip-based board which works: DLINK DFE500-TX.

branches: 1.45.2;
According to Bill Paul <wpaul@ctr.columbia.edu>, only the baseboard variant
of the Compaq NetFlex 3/P uses a Thunerlan TNETE100 chip. The PCI variant
use some other PCI chip the ThunderLAN driver can't handle yet.
Also, correct SYNOPSYS.

note that we support the 3c905B now.

Add a supported AdvanSys SCSI adapter.

Add info for LMC cards

Add AdvanSys SCSI host adapters to the supported hardware

Be more precise about which of Adaptec's AIC chips we support.
Fixes PR kern/7011 by Olaf Seibert.

Update to current state of pciide. Note support of ISA, ISAPnp and PCMCIA
IDE controllers too.

Markup for -mdoc and -mdoc2html.

Note support of the CMD PCI0643 and 0646 IDE controllers.

Note PCI IDE support and ATAPI disks.

Note the supported USB hardware.

Add USB.

Add another sound card.

Add Aria driver.

note that 3c905B in not supported
(from Nathan J Williams <nathanw@mit.edu>)

DEPCA (ISA) is proven to work
add 3c90X

Add Ensoniq AudioPCI.

SlimSCSI is not AHA- but APA-.

update for changed uha1 ISA base address

RCS Id Police.

Fix a pr-4797 (Dave Huang) -- we messed up the model number on one NCR
SCSI adapter.

fix numerous typos, from Brian Baird <brb@brig.com>

add two more 53c8xx-based cards; from Dave Huang in PR 4687

add devices supported by cy, guspnp, and joy drivers to list; note
that APM is not included in INSTALL kernels

iy (Intel etherexpress pro/10) is on the install floppy. Also update I/O
adress.

Fix 3COM 3x90X and Intel EtherExpress 100 info. From Matthias Scheler.

Add "TI TravelMate 5000 series laptop docking station's ethernet board" to
the list of supported harware by the TL driver (per William Coldwell).

Make this more up to date.

Correct ThunderLAN spelling

branches: 1.16.2;
Remove false reference claiming that WD7000 support isn't present in
the small floppy, given that there is no such beast any longer.

These problems are fixed by thorpej's ahc->sc_xxxq, since Dec 02 1996.

Add some PCMCIA devices (done while noting DEC DEPCM-BA and DE305 support).

Note support of Compaq's thunderland-based network adapters

minor mods:
* BIOS for NCR only needed to boot
* eliminate redundancy in APM description
* wordsmithing on driver inclusion in INSTALL kernels

Add an entry for ATAPI CD-ROMs. Also the section about SCSI and ATA(PI)
to explain how devices names are assigned.
Also restored some tabs.

Note that EtherWORKS III are now supported.

use _VER for NetBSD version; note that fileset names must still be
updated by hand.

update for 1.2G

Update. In particular, remove refernces to the kcoth/kcadp split (we
no longer have split kernels) and remove references to "kernel copy"
floppies since we are now using ramdisk boot kernels.

Add APM to supported hardware and 1.2 -> 1.2A

merge in 1.2 branch

branches: 1.4.4;
Sync with reality with regard to EtherExpress 16

merge in changes from 1.1 release branch

branches: 1.2.2; 1.2.4;
modify for generic kernel contents

branches: 1.1.1;
Initial revision