Based on feedback (various), remove the .toc files from CVS,
and instead generate them each and every time (twice!).
Based on a suggestion from Alan Barrett, allow setting MAKETOC=no
to permit rebuilding the install notes without regenerating the
.toc files, to allow more speedy debugging of markup changes.

Initial generation of table of contents for each version of the release notes.

Based on feedback (various), remove the .toc files from CVS,
and instead generate them each and every time (twice!).
Based on a suggestion from Alan Barrett, allow setting MAKETOC=no
to permit rebuilding the install notes without regenerating the
.toc files, to allow more speedy debugging of markup changes.

Initial generation of table of contents for each version of the release notes.

Based on feedback (various), remove the .toc files from CVS,
and instead generate them each and every time (twice!).
Based on a suggestion from Alan Barrett, allow setting MAKETOC=no
to permit rebuilding the install notes without regenerating the
.toc files, to allow more speedy debugging of markup changes.

Initial generation of table of contents for each version of the release notes.

Based on feedback (various), remove the .toc files from CVS,
and instead generate them each and every time (twice!).
Based on a suggestion from Alan Barrett, allow setting MAKETOC=no
to permit rebuilding the install notes without regenerating the
.toc files, to allow more speedy debugging of markup changes.

Initial generation of table of contents for each version of the release notes.

don't look for now-gone sparc/legal

branches: 1.3.32; 1.3.78;
- define COMMON as "${.CURDIR}/../common", and use appropriately
- remove .PATH: ${.CURDIR}/../common
- update the various MERGED_SRCS lines to reflect reality

branches: 1.2.2;
Use bsd.man.mk (maybe should be something else) instead of bsd.prog.mk, and
do the cleaning differently.

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.

Various style fixes (and some of VAX related errors and copy&pastos),
from Mouse on tech-install.

branches: 1.12.6;
s/developement/development/

Pass the name of the compressor actually used for sets to groff and use
it in the content description (XXX need to adapt a few more copies in,
as of now, unaffected architectures)

Mention that USE_XZ_SETS are either always xzipped, and in evbarm might
be xzipped or gzipped.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.7.2; 1.7.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.5.8; 1.5.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.4.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

migrate */contents -> common/contents, as there was *way* too much
unnecessary duplication. wrap the MD stuff in .if r_foo \{\ ... .\}

finish porting these from the sparc versions. they are mostly correct
now though the install instructions could still do with some more work
and expansion....

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.

- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.27.28;
Various updates to the install notes.

Note that re(4), ath(4), and puc(4) are known to work on sparc64.

Slight update for Xorg, a couple devices, and size requirements. Needs
some more changes.

branches: 1.24.6;
Update supported hardware, add new kernel sets.

branches: 1.23.2; 1.23.4; 1.23.6;
- we don't support the new UltraSPARC T1 or T2
- lint
- we ffb and afb aka Creator3D

branches: 1.22.4; 1.22.8;
fixup fdc entry

remove floppy drives from unsupported hardware and note that only sbus based
machines are supported for now

mention floppy drives

Note sunsolve now requires a login.

Adapt unsupported hardware section

branches: 1.17.10;
0680 card is silicon image, not cmd tech

expand pci card compatability descriptions and list known working cards

Major overhaul of sparc64 install notes. Reflects currently supported
hardware and installation methods along with additional info.

branches: 1.14.2;
List more supported systems.

Sync with recent sparc64 changes.

updates per discussion with matt green

add two missing .bullet) s

clean up whitespace and formatting

Update supported hardware.

branches: 1.8.2;
Kill ncr(4), mention esiop(4).

update sparc64 (and some generic) set sizes to reality (gnu.tgz is
*much* larger for sparc64 now! :-). remove the notes that PCI kbd/ms,
sbus audiocs, and fas support don't work because they now do.

recommend 32MB as a minimum. PCIIDE cdroms work on the secondary channel,
but disks do not. add install from solaris' instructions from Murray
Stokely <murray@osd.bsdi.com>.

- sbus ethernet drivers have now been fixed
- move the pciide note

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

finish porting these from the sparc versions. they are mostly correct
now though the install instructions could still do with some more work
and expansion....

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.

Various updates to the install notes.

branches: 1.30.2;
Use \*[Lt] and \*[Gt].

branches: 1.29.2;
Convert TNF licenses to new 2 clause variant

branches: 1.28.2; 1.28.6; 1.28.8;
init creates the RAM disk for devices not the kernel

Add a warning that booting the install kernel from a Solaris root partition
may fail for non obvious reasons. Fixes for the bootloader will not be
available in-time for 4.0, unfortunately.

branches: 1.26.2; 1.26.4; 1.26.8;
PR/13749 - Incorrect options specified for dd(1) in tape installs.

Cleanup dd options accordingly to the following policy:
1) put if, of, bs, conv in this order
2) for reading/writing from/to disk don't use sync
4) reading from tape - use sync
3) writing to tape - use osync

Noted by Don Yuniskis (auryn at gci-net.com) via install/13749. Thanks!
Reviewed by <martin>. Thank you!

Fix a typo.

Add description for Solaris 10 dual boot installation from Ben Collver
in PR port-sparc64/29703.

sparc64 has OpenFirmware, not OpenBoot PROM
also, ditch extraneous example disklabel

Use MI ../common/sysinst instead of abridged version

Major overhaul of sparc64 install notes. Reflects currently supported
hardware and installation methods along with additional info.

Remove extra "NetBSD" after ".Nx" macro.

branches: 1.19.2;
Sync with recent sparc64 changes.

Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

Simplify boot commands (no -s needed), kill all references to installation
scripts, we use sysinst now.

escape ...

Replace "filesystem" with the correct phrase, "file system."

clean up whitespace and formatting

Update with CDROM and INSTALL kernels.

branches: 1.12.2;
for example fstab, refer to /usr/share/examples/fstab/

Quote > and < characters with \*> and \*< in order to get semi-correct
HTML as one of the results.

"than" instead of "then".

ultrasparcen do not tftp ip.arch just ip. noted by <andrew@ugh.net.au> on port-sparc64

clarify instfs.tgz & netbsd.INSTALL.gz usage.

add a note about the new "instfs" and also xref diskless(8).

Minor spelling fixes.
dislabel -> disklabel
labelled -> labeled
Asumming -> Assuming

recommend 32MB as a minimum. PCIIDE cdroms work on the secondary channel,
but disks do not. add install from solaris' instructions from Murray
Stokely <murray@osd.bsdi.com>.

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

finish porting these from the sparc versions. they are mostly correct
now though the install instructions could still do with some more work
and expansion....

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.

merge port-specific legal sections into the common file. most of these
entries were already in the common file, and it's a pain to maintain
them separately.

branches: 1.3.34; 1.3.80;
more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.

Avoid dead link to the NVRAM/Hostid FAQ

More cleanup:
- simplify TOC handling and remove arg limit (from uwe)
- use Lk with explicit anchor text in some places
- do not allow official release builds when we can not derive the
proper date from the buildid

branches: 1.15.48; 1.15.50;
Various updates to the INSTALL notes in preparation for 5.0. Changes
are still to come.

branches: 1.14.2;
Various updates to the install notes.

Note root partition size limitations on certain sparc and sparc64 models
(taken from the boot(8) manual pages).

branches: 1.12.26; 1.12.34;
Add a comment about that "Fast Data MMU Miss" may indicate a needed OBP
upgrade. Hinted at in a posting on port-sparc64@ by Philip Jensen,
OK'd by martin@.

Mention that installer defaults to serial speed of 9600 8N1 and user might
want to pre-configure their system around that.
Closes PR 11946

Redo suggested partitioning info with more resonable sizes

Major overhaul of sparc64 install notes. Reflects currently supported
hardware and installation methods along with additional info.

branches: 1.8.2;
clean up whitespace and formatting

branches: 1.7.2;
update sizes for / and /usr to ones that actually *fit*

Minor spelling fixes.
dislabel -> disklabel
labelled -> labeled
Asumming -> Assuming

sun4u machines don't have the sd3<->sd0 remapping crud

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

finish porting these from the sparc versions. they are mostly correct
now though the install instructions could still do with some more work
and expansion....

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

branches: 1.6.64; 1.6.66;
Convert TNF licenses to new 2 clause variant

branches: 1.5.26; 1.5.28;
Use MI upgrade in ../common/upgrade

branches: 1.4.2;
clean up whitespace and formatting

branches: 1.3.2;
major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

finish porting these from the sparc versions. they are mostly correct
now though the install instructions could still do with some more work
and expansion....

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.

Make the port-specific changelog ($MACHINE/whatis) optional by using .pso
to call a shell script which outputs nothing if the file is not present.

Remove the "whatis" file for ports where it does not contain anything
useful and hasn't been updated for years. OK tsutsui@, hubertf@.

Clear the old list of changes (between NetBSD 2.0 and 3.0 releases) as a
preparation for filling the list of changes between NetBSD 3.0 and 4.0
releases. In some obsolete claims like "this is the n-th major releae of
NetBSD for the xyz platform" replace n by XXX.

branches: 1.15.4; 1.15.6;
First cut at 2.0 -> 3.0 port specific changes

branches: 1.14.2;
Mention that more models are supported in this release

2.0 will be the third major release of sparc64.

Fix .Nx tag

branches: 1.11.2;
note merged ofwboot/ofwboot.net

Note compiler update (suggested by mrg)

Not cycle counter based microtime(9)

Don't spell serial in german.

machines with e, uppercase PCMCIA.

Sync with recent sparc64 changes.

updates per discussion with matt green

update MD "whatis" to closer to what 1.6 provides

branches: 1.3.2;
- update whatis files to contain (hopefully) up to date info on:
- "this is the xxx major release"
- features added and bugs fixed in 1.5
- use .Nx instead of NetBSD
- use .Sq instead of ' [...] ' or ` [ ... ] '
- use .Dq instead of " [...] "

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.

- move "MD instructions on setting up boot media"
from common/xfer with messy mdoc .if conditionals
into MD xfer files so that developers can see
what contents are missing or obsolete and should be
written or updated
- remove some useless MD description for maintainability

XXX: still a bunch of unmaintained .if \n [${MACHINE}] in common files

branches: 1.2.34;
major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

branches: 1.1.2;
initial sparc64 install notes; still needs major editing to remove sparc-specific
crap and add ultrasparc specific crap.