Based on feedback (various), remove the .toc files from CVS,
and instead generate them each and every time (twice!).
Based on a suggestion from Alan Barrett, allow setting MAKETOC=no
to permit rebuilding the install notes without regenerating the
.toc files, to allow more speedy debugging of markup changes.

Initial generation of table of contents for each version of the release notes.

Based on feedback (various), remove the .toc files from CVS,
and instead generate them each and every time (twice!).
Based on a suggestion from Alan Barrett, allow setting MAKETOC=no
to permit rebuilding the install notes without regenerating the
.toc files, to allow more speedy debugging of markup changes.

Initial generation of table of contents for each version of the release notes.

Based on feedback (various), remove the .toc files from CVS,
and instead generate them each and every time (twice!).
Based on a suggestion from Alan Barrett, allow setting MAKETOC=no
to permit rebuilding the install notes without regenerating the
.toc files, to allow more speedy debugging of markup changes.

Initial generation of table of contents for each version of the release notes.

Based on feedback (various), remove the .toc files from CVS,
and instead generate them each and every time (twice!).
Based on a suggestion from Alan Barrett, allow setting MAKETOC=no
to permit rebuilding the install notes without regenerating the
.toc files, to allow more speedy debugging of markup changes.

Initial generation of table of contents for each version of the release notes.

branches: 1.3.32;
- define COMMON as "${.CURDIR}/../common", and use appropriately
- remove .PATH: ${.CURDIR}/../common
- update the various MERGED_SRCS lines to reflect reality

branches: 1.2.2;
Use bsd.man.mk (maybe should be something else) instead of bsd.prog.mk, and
do the cleaning differently.

branches: 1.1.10;
Makefiles for notes.

Various style fixes (and some of VAX related errors and copy&pastos),
from Mouse on tech-install.

branches: 1.22.6;
s/developement/development/

Modernize release notes:
- use https where possible
- adapt to cdn/nycdn and our current auto-build conventions
- automate where possible
Many thanks to uwe for lots of *roff help.

Pass the set suffix (either .tgz or .tar.xz) from the makefile.
Document the rescue set.

branches: 1.19.2; 1.19.4;
Fix a typo

Document debug sets and kernel module directory.

branches: 1.17.8; 1.17.14;
- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.16.24;
Move common/contents file into MD dirs again.
I know it isn't a good thing to have many copy-and-pasted contents
(set file descriptions etc) in all MD files, but it's much more annoying
to maintain a bunch of .if \n [${MACHINE}] conditionals for all ports
and maintainers rarely notice that they also have to prepare or update
MD contents in MI content file with messy ifdefs.

XXX: of course common text should be shared by mdoc macro etc.
but I doubt playing mdoc(7) is really worth...

migrate */contents -> common/contents, as there was *way* too much
unnecessary duplication. wrap the MD stuff in .if r_foo \{\ ... .\}

- use `press' instead of `hit'
- update copyrights

We ship XFree 3.3.6 these days, not 3.3.3.1.

Remove paragraph about secr set.

branches: 1.11.8;
* Delete sun3x from SUBDIR
* The merged contents file didn't work out, so nuke it and put it back
into each port directory. Most still have the now-pointless conditionals;
these now should be deleted.
* fix alpha, amiga, and arm32 to delete the maze of twisty little conditionals

Remove these before someone spends time changing them. There is one
contents file now: notes/common/contents.

Mention X sets.
Security distribution is actually available because it is m68k-common.

1) Remove all vestiges of tar from src/distrib. Use pax and appropriate
commandlines for all tar operations. (work supplied by Matt Green)
2) Update arch/*/md.c to deal with new sysinst/run.c. Special case
anything that needs to do a redirect or a pipe.
3) #if 0 some unused code in target.c. This code will need to be updated,
or special cased with do_system.

Big thank you to Matt for all his work on this.

Use `set' for the kernel as well as userland utilities.
Some more updates to catch up to the installation procedure changes.

Updated for the new install procedure with the single-disk miniroot.
Use _VER macro for the version number.

We don't ship with a FORTRAN compiler... point this out (the old text was
misguiding).
We do ship, however, with an Objective C compiler.

RCS Id Police.

branches: 1.3.2;
Reword the `domestic' items a bit so they do not state an explicit legal
opinion regarding ITAR/EAR.

update.

branches: 1.1.2;
first commit of x68k related document.

- update upgrade issues:
+ ARM ABI change
+ new users
+ new groups
- add modules set where missing
- formatting improvements
- note that rtsol{,d} will be gone in the future
- fix raw partition info
- update sparc64 hardware support
- remove note about sparc SMP support being broken
- update some size requirements (still lots of ancient bogus RAM
minimums lingering -- HI PORTMASTERS!)
- various other minor content modernization
- whitespace fixes

branches: 1.17.26;
Various updates to the INSTALL notes in preparation for 5.0. Changes
are still to come.

branches: 1.16.32; 1.16.40; 1.16.42;
add Nereid USB (SL811HS/T)

clean up whitespace, formatting, copyrights

The built-in ADPCM device is supported.

branches: 1.13.2;
about Nereid ethernet.

Reflect the current status and installation system.

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

X68k now uses sysinst.
Also update reflecting the current version.
More cleanup is needed before pulling it up to netbsd-1-5.

branches: 1.8.8;
FPU is not required now.

Update to fit with the current status.
- Increse required disk space.
- Note newly introduced utility loadbsd.x.

branches: 1.6.2;
Increase required diskspace.

Markup for -mdoc and -mdoc2html.

Updated for the new install procedure with the single-disk miniroot.
Use _VER macro for the version number.

RCS Id Police.

branches: 1.2.2;
update.

branches: 1.1.2;
first commit of x68k related document.

branches: 1.18.32;
clean up whitespace, formatting, copyrights

branches: 1.17.2;
Reflect the current status and installation system.

fix bad quoting in .Dl .. .Ic lines when using other formatting (e.g, Ar)

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

- use `press' instead of `hit'
- update copyrights

X68k now uses sysinst.
Also update reflecting the current version.
More cleanup is needed before pulling it up to netbsd-1-5.

branches: 1.11.4;
fix sendmail.cf file path.

Now that the md driver forcely turn on RB_SINGLE, no warning is
presented at boot time.
Also note for /start script.

Update to fit with the current status.
- Increse required disk space.
- Note newly introduced utility loadbsd.x.

branches: 1.8.2;
Add ethernet setup procedure.

Markup for -mdoc and -mdoc2html.

The install now does not ask the type of the disk.
It only supports SCSI disks.
Also, use `set' for the kernel installation as well as for the
userland utilities.

Updated for the new install procedure with the single-disk miniroot.
Use _VER macro for the version number.

Add notes about steps to do after installation that are common to all
platforms; Thanks to Colin Wood and Simon Burge for their comments.

RCS Id Police.

branches: 1.2.2;
update.

branches: 1.1.2;
first commit of x68k related document.

merge port-specific legal sections into the common file. most of these
entries were already in the common file, and it's a pain to maintain
them separately.

This product includes software developed by Yasushi Yamasaki.

first pass de-suckification for 2015. modernize content a bit, fix dirty
rotten lies, improve wording, sync legalese with reality, yada yada yada.

branches: 1.6.34; 1.6.80;
use .It for formatting legal section.

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

branches: 1.4.10;
Markup for -mdoc and -mdoc2html.

RCS Id Police.

fixed typo

branches: 1.1.2;
first commit of x68k related document.

Various updates to the INSTALL notes in preparation for 5.0. Changes
are still to come.

branches: 1.8.32; 1.8.40; 1.8.42;
clean up whitespace, formatting, copyrights

branches: 1.7.2;
more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

X68k now uses sysinst.
Also update reflecting the current version.
More cleanup is needed before pulling it up to netbsd-1-5.

branches: 1.4.10;
Markup for -mdoc and -mdoc2html.

Updated for the new install procedure with the single-disk miniroot.
Use _VER macro for the version number.

RCS Id Police.

branches: 1.1.2; 1.1.4;
first commit of x68k related document.

branches: 1.15.32;
clean up whitespace, formatting, copyrights

branches: 1.14.2;
We can now do upgrade by using sysinst.

more work:
- use .Tn, .Bx, .Ul, .Key, .Sq, .Dq, .Li, .Dl, (etc) ... as appropriate
- be more consistent between various ports' install notes
- other cleanups

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

- use `press' instead of `hit'
- update copyrights

X68k now uses sysinst.
Also update reflecting the current version.
More cleanup is needed before pulling it up to netbsd-1-5.

branches: 1.9.8;
Now that the md driver forcely turn on RB_SINGLE, no warning is
presented at boot time.
Also note for /start script.

Typo.

branches: 1.7.2;
Markup for -mdoc and -mdoc2html.

Use `set' for the kernel as well as userland utilities.

Updated for the new install procedure with the single-disk miniroot.
Use _VER macro for the version number.

Correct spelling in */upgrade. More general editing in alpha/install.

Untangle the first paragraph in the upgrade notes that were copied
from i386/upgrade.

RCS Id Police.

branches: 1.1.2; 1.1.4;
first commit of x68k related document.

Make the port-specific changelog ($MACHINE/whatis) optional by using .pso
to call a shell script which outputs nothing if the file is not present.

Remove the "whatis" file for ports where it does not contain anything
useful and hasn't been updated for years. OK tsutsui@, hubertf@.

branches: 1.9.6; 1.9.12; 1.9.14;
update MD "whatis" to closer to what 1.6 provides

branches: 1.8.2;
- update whatis files to contain (hopefully) up to date info on:
- "this is the xxx major release"
- features added and bugs fixed in 1.5
- use .Nx instead of NetBSD
- use .Sq instead of ' [...] ' or ` [ ... ] '
- use .Dq instead of " [...] "

major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

X68k now uses sysinst.
Also update reflecting the current version.
More cleanup is needed before pulling it up to netbsd-1-5.

branches: 1.5.10;
Update.

Markup for -mdoc and -mdoc2html.

Updated for the new install procedure with the single-disk miniroot.
Use _VER macro for the version number.

RCS Id Police.

branches: 1.1.2; 1.1.4;
first commit of x68k related document.

- move "MD instructions on setting up boot media"
from common/xfer with messy mdoc .if conditionals
into MD xfer files so that developers can see
what contents are missing or obsolete and should be
written or updated
- remove some useless MD description for maintainability

XXX: still a bunch of unmaintained .if \n [${MACHINE}] in common files

branches: 1.8.34;
major terraform (this is MUCH more than a rototill :-), including:
- update for 1.5 (still more MD stuff to check)
- use new macros in ../common/macros as appropriate
- introduce some CONSISTENCY between the various ports' install docs
- use various mdoc macros as appropriate, including .Li, .Pa, .Sy, and .Ic.
- migrate more stuff into ../common/*
- whitespace cleanup
- lots of other little things i'm sure...

X68k now uses sysinst.
Also update reflecting the current version.
More cleanup is needed before pulling it up to netbsd-1-5.

branches: 1.6.4;
Fix doubled 'the's.

Update to fit with the current status.
- Increse required disk space.
- Note newly introduced utility loadbsd.x.

branches: 1.4.2;
Markup for -mdoc and -mdoc2html.

Updated for the new install procedure with the single-disk miniroot.
Use _VER macro for the version number.

RCS Id Police.

branches: 1.1.2; 1.1.4;
first commit of x68k related document.