branches: 1.3.20;
Add support for the SMALL install image on prep

.WAIT sync. whitespace cleanup

Add prep installer

unused crap

Add prep installer

unused crap

Add prep installer

unused crap

Add prep installer

Use ${TOOL_GZIP} instead of just gzip in all Makefiles
outside */dist/* subdirectories.

When USE_PIGZGZIP=yes, bsd.own.mk sets TOOL_GZIP=${TOOL_PIGZ},
so there's no need to test USE_PIGZGZIP in these Makefiles.

branches: 1.12.18; 1.12.24;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.11.2;
Convert prep to use the new unified mkbootimage rather than it's own. This
mkbootimage can be shared by prep, rs6000, and bebox.

TODO: Convert bebox to use this. Needs someone to test.

branches: 1.10.20; 1.10.22;
Modify these makefiles to use the new mkbootimage.. hopefully I got this
right.

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

Use $PREPMKBOOTIMAGE.

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

NDWO cleanup

Make sure <bsd.own.mk> is pulled in before ${PRINTOBJDIR} is used.

Convert to using ${MDSETIMAGE}.

Provide a default value for $MDSETIMAGE and pull in bsd.own.mk to have
it overriden as needed for cross/-current builds.

Add prep installer

branches: 1.3.32;
Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

NDWO cleanup

Add prep installer

branches: 1.3.32;
Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

NDWO cleanup

Add prep installer

branches: 1.3.32;
Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

NDWO cleanup

Add prep installer

branches: 1.3.32;
Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

NDWO cleanup

Add prep installer

branches: 1.1.20;
Add support for the SMALL install image on prep

branches: 1.1.20;
Add support for the SMALL install image on prep

Use ${TOOL_GZIP_N} instead of ${TOOL_GZIP} -n, and similarly
use ${TOOL_GZIP_N} -9 instead of ${TOOL_GZIP} -9n, etc.

This will pass -nT instead of just -n if the gzip program is
actually pigz.

branches: 1.10.2;
Use ${TOOL_GZIP} instead of just gzip in all Makefiles
outside */dist/* subdirectories.

When USE_PIGZGZIP=yes, bsd.own.mk sets TOOL_GZIP=${TOOL_PIGZ},
so there's no need to test USE_PIGZGZIP in these Makefiles.

branches: 1.9.6; 1.9.12;
Consistently use gzip with the -n flag so dates are not embedded.

Not tested on all platforms.

branches: 1.8.4;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.7.32; 1.7.36;
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

improve how gzipping is done to reduce amount of temp files, etc.

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

convert to NDWO

Add prep installer

branches: 1.9.20;
Add INSTALL_SMALL here as well, otherwise we break the build. Thanks to
he for catching this.

- whitespace consistency cleanup
- build (mdset/nm/strip) into ${filename} as one rule, and move ${filename}.gz
into separate rule
- rename MDSET.${filename}.nosymbols -> MDSET_NOSYMBOLS.${filename}
- rename MDSET.${filename}.post -> MDSET_POST.${filename}, and don't do
suffix handling here
- rework suffix handling:
- rename MDSET.${filename}.suffixes -> MDSET_SUFFIXES.${filename},
and change from list of suffixes to list of "suffix cmdtobuildsuffix",
where cmdtobuildsuffix is the name of the variable containing the
command to build ${filename}.${suffix} (available as "${.TARGET}").
- for each ${filename}.${suffix}, depend upon ${filename} and use
${cmdtobuildsuffix} to create the former.
- add separate ${filename}.${suffix}.gz rule
- mipsco & pmax: rename "install.gz" to "netbsd-INSTALL.gz", for
consistency and so the target to build the mdset kernel doesn't get
confused with general "install" target

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Makefile.mdset:
replace
TARGETS = KERNEL IMAGE [...]
with
MDTARGETS = KERNEL IMAGE FILENAME [...]
If FILENAME is "-", use "netbsd.${KERNEL}" as the target filename

The rest:
Update for new MDTARGETS syntax. In some cases, the kernel
name from the "old" method will be used to override the default.

- don't pull in <bsd.prog.mk> in Makefile.mdset; do that in the caller instead
- renamed optional post-strip action variable from ${KERNEL}.post to
netbsd.${KERNEL}.post

convert to using distrib/common/Makefile.mdset

Convert to using ${MDSETIMAGE}.

Provide a default value for $MDSETIMAGE and pull in bsd.own.mk to have
it overriden as needed for cross/-current builds.

Add prep installer

bump bebox and prep image sizes for GCC 9.

1. Remove all the special handling of variables (-d -p -P -s -S) that
were dealing with DBG (-d) LDSTATIC/NOPIE (-p), and the rest with
disabling/enabling sanitizers.
2. Use emalloc/estrdup for all the allocators instead of only some cases.
3. Add -V varspec which passes variables on the command line (as DBG
and LDSTATIC used to be passed before) instead of appending them
to the on-the-fly Makefile using -v varspec.
4. Change the distrib and rescue Makefiles to use -V instead of the removed
flags.

The motivation of this is to make variable handling consistent, less magical,
and remove the need for changing crunchgen each time we want to add disabling
an option by default.

(as proposed in tech-toolchain)

branches: 1.22.12;
+= for MAKEFS_FLAGS

branches: 1.21.6; 1.21.10;
Don't set -mmultiple or -mno-string for PowerPC, the difference is too
small to really matter and it sometimes even increases the size.

branches: 1.20.12; 1.20.24;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

Replace references to local and now no-longer-existing termcap files
with references to ${DISTRIBB}/common/termcap. Hi, abs@!

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Use the generated protocols file. Save another 20k or so.

branches: 1.15.12; 1.15.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Add support for the SMALL install image on prep

Make the ramdisk a little bigger

I changed the ramdisk size in the kernel, but failed to change the size
of the ramdisk image. Thanks to he for catching this one.

Add French, German and Polish sysinstmsgs to all ramdisks that include sysinst
expect those where at least one of the language variants isn't built,
and those that are known not to have enough space (i386 ramdisk-tiny).
Files added to list.sysinst, list.sysinst.en is used when these files
cannot be added.
This might hit a size limit on another build - but I have no (sane) way of
testing it.

branches: 1.10.4;
yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

convert to new distrib world order.
xxx; untested

Use crunchgen -d flag to set DBG in the generated makefile.

- Be consistent how libhack is used: If extra HACKOBJS (e.g., gethost.o) are
required, define them before pulling in libhack/Makefile.inc so that the
dependencies work correctly.
- Other minor cleanups

Disable libhack's gethost.o (replacement gethostby{name,addr}()) by default,
as they only support reading /etc/hosts, and its the "least useful" of
the libhack routines. Add gethost.o back to Really Small media which
appears to need the space savings.

Fix cross-compile failure.

Add MTREE?= to add Makefiles and use when running mtree

Use symbol MTREECONF instead of MTREE to refer configuration file
to avoid conflicts. Pointed out by chs@netbsd.org.

Add prep installer

convert to new distrib world order.
xxx; untested

Add prep installer

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

This file is nothing but comments. Trim it out to a stub.

branches: 1.2.26; 1.2.28;
Spell removable with only two es. Inspired by jmc@openbsd.

Add prep installer

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.2.32; 1.2.100; 1.2.102;
netbsd.org->NetBSD.org

Add prep installer

Remove unnecessary gnu/usr.bin path from SRCDIRS.

branches: 1.19.4;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Of the arious list files 28 said
PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip
while 14 picked
PROG usr/bin/gzip usr/bin/gunzip usr/bin/gzcat

Make them all choose the former. No functional change.

Add -lprop to the LIBS line so that ifconfig will link.

Switch to using x_ed and x_umount. x_mount didn't save much, but x_ed
saved alot: 1516140->1503104. 28k to go, and running out of ideas.

Update to point to the cut-down version of protocols

Remove mount_kernfs from the prep install floppy. Saves a few bytes, we
already put dmesg on there, and the prep install kernels don't have KERNFS
defined anyhow. A quick test shows it's cheaper to use dmesg than kernfs:

1528511 +kernfs +mount_kernfs -dmesg
1524332 +dmesg -kernfs -mount_kernfs

branches: 1.8.12; 1.8.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Remove tip from prep's install media. We just don't have the room on
prep for that.

Delete the:
SPECIAL dmesg srcdir distrib/utils/x_dmesg
line from all the ramdisk 'list' files. dmesg/Makefile will add -DSMALL
if SMALLPROG is defined (which it is by Makefile.crunch).

Now that usr.bin/ftp/Makefile supports SMALLPROG and SMALLPROG_INET6,
we don't need distrib/utils/x_ftp anymore...

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Remove duplicated sysinst entry.

convert to new distrib world order.
xxx; untested

Add prep installer

convert to new distrib world order.
xxx; untested

Add prep installer

convert to new distrib world order.
xxx; untested

Add prep installer

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Delete glasstty lpr and vt52 entries.

branches: 1.1.34; 1.1.36;
Add prep installer