distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.2.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.1.6; 1.1.12;
fix acorn32 MKDEBUG=yes builds.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.8.30;
Undo previous changes; the debug libraries were installed because of a bug
in the Makefiles... (Setting MKDEBUGLIB in /etc/mk.conf overrides some
Makefile settings)

Fix alpha sets

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.5.6; 1.5.12;
fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

Add some missing entries to fix MKDEBUG build on alpha.

Looks good from tsutsui.

branches: 1.3.16;
Do datbase normalization on sets/lists/*/* containing shared-library
related files. Partition into three categories:
* shl.mi -- MI sharedlib files present on all ports with shared libs
* shl.aout -- MI sharedlib files present on all ELF ports
* shl.elf -- MI sharedlib files present on all a.out ports

Add rudimentary shl* support to makeflist.
Remove files left empty after shlib normalization.
Add ad.mips where appropriate.
Make libc, libedit numbers consistent (libc.so.12.29, libedit.2.1).

add .so's for all of the shared libs (just symlinks). These are only
used when compiling (or should only be used then), so putting them into
xcomp is good even though putting them into xbase wouldn't cost too
much space.

branches: 1.1.2;
Add this while here.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.56.12;
Give package name to xcomp machine dependency files

lint library for vdpau

move the mesa 18 khrplatform.h header into xcomp/mi.

fix path to khrplatform.h

libvdpau pkg-config file is called vdpau.pc.

this does not need a special rule, just to be named correctly.

- build and install libvdpau and x86 and evbarm.
- add khrplatform.h for mesa_ver=18 platforms.

need to enable libvdpau.pc generation (needs special rules)


this mostly comes from maya in the first one, and a small part
of the second:

commit 48eb746983a5a7967fba221e7b167808af36f44a
Author: Maya Rashish <maya@NetBSD.org>
Date: Sun Feb 24 09:31:22 2019 +0200

More of vdpau. Cogs spin.

commit d9fbba8f61a43648d32f160c5fa62626788566ff
Author: Maya Rashish <maya@NetBSD.org>
Date: Sat Feb 23 22:36:37 2019 +0200

Adjust for MesaLib 18.

Build llvmpipe driver on x86 (the driver itself is x86-only).
build llvm on all x86, even on GCC builds.
galahad driver removed (upstream).
Don't build mesa 7 at all.

Install more libdrm nouveau headers.

These will be used by mesa 18.

branches: 1.49.14;
remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

add missing lint libraries, sort

updates for libdrm 2.4.70. build libdrm_amdgpu on x86.

adjust to the Makefile fixes.

add lint libraries

remove extra lint libraries now that those libraries are private.

build libdrm_nouveau and xf86-video-nouveau on x86.

crashes early when starting so far.

add missing lint libraries

Add MKCOMPATX11 knob for making X11 compat libraries.

Support building the xorg X11 libraries under MKCOMPAT.
Add XORG_MACHINE_ARCH to compat's bsd.*.mk
Turn xorg makekeys and makestrs into real host tools which are installed into
${TOOLSDIR}

sort

branches: 1.38.2; 1.38.6;
sort

Kill lint libraries we don't (or can't yet) produce

branches: 1.36.2;
Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.33.2;
+libxgi_drv.so.1.debug

branches: 1.32.2;
obsolete libxf8_16bpp.

bump libchromeXvMC major to match the other hw libraries to make
libXvMCW happy

build and install libchromeXvMCPro from xf86-video-openchrome

branches: 1.29.2;
In case it's too obvious, the libI810XvMC directory is for building the
libI810XvMC library. Additionally, set list fixes for this and previous
related changes.

+libopenchrome_drv.so.0.debug for amd64 and i386.

build libchromeXvMC on x86.

updates for Mesa 7.7.1.

updates for xf86-video-vmware

install libdrm_intel.pc and libdrm_radeon.pc

intall libkms.h into the right place. fix some libdrm_radeon issues.

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Fix MKDEBUG=yes library builds for amd64

fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

PR/41991: Joachim Kuebart: add debug libs for libdrm_intel and unmark the
regular lib as profile.

Mark XOrg {ioport,xorgconfig}.debug as obsolete.

merge all the changes for xorg-server 1.6

put the drm_intel files in the right places.

set lists updates for new libdrm, libdrm_intel.

partly from snj@.

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.13.2; 1.13.4; 1.13.8;
Fix entries for XF86VM(3), so that MKMANZ is properly handled. Reported by
Marcin M. Jessa on current-users.

fix amd64 lists for MKDEBUG=yes MKXORG=yes

Reformat the columns

s/.debug/debug/ for tags.

move XF86VM.3 into xcomp where it belongs.

make xorg sets for amd64 almost entirely correct.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.

mark all src/x11 built files with "x11" tag.

branches: 1.4.12; 1.4.16;
Add amd64 specific debug files.
Fix build.sh release for amd64 with MKDEBUG=yes

Adapted from md.i386.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

x86_64 -> amd64

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.6.30;
Undo previous changes; the debug libraries were installed because of a bug
in the Makefiles... (Setting MKDEBUGLIB in /etc/mk.conf overrides some
Makefile settings)

fix amiga sets

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.3.6; 1.3.12;
fix MKDEBUG=yes builds on amiga

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

md.arm32 -> md.shark

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

RCS police

branches: 1.3.2;
Now that the SHARK X server builds out of xsrc we need a few more files
in the X sets.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.

mark all src/x11 built files with "x11" tag.

branches: 1.5.2; 1.5.32; 1.5.36;
Add the XF86VidMode* manual pages.
Fixes PR port-atari/25181 from Piotr Meyer.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

branches: 1.3.2;
"libXxf86dga.a", "libXxf86misc.a" and "libXxf86vm.a" belong into the
"xcomp" and not into the "xserver" set.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.11.2; 1.11.8;
obsolete libxf8_16bpp.

fix MKDEBUG=yes for X11R7 libs

fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.7.4;
Fix entries for XF86VM(3), so that MKMANZ is properly handled. Reported by
Marcin M. Jessa on current-users.

Reformat the columns

Check in xorg set list updates for cats.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.

mark all src/x11 built files with "x11" tag.

branches: 1.1.36; 1.1.40;
Add set files for cross building X for cats.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.5.30;
Undo previous changes; the debug libraries were installed because of a bug
in the Makefiles... (Setting MKDEBUGLIB in /etc/mk.conf overrides some
Makefile settings)

fix dreamcast sets.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.2.6; 1.2.12;
Prepare entries for Xorg wsfb based server for dreamcast.
Not enabled by default yet and old xfree entries are still preserved.

XXX1: No maple keyboard keymap yet:
http://mail-index.NetBSD.org/tech-x11/2010/06/19/msg000785.html

XXX2: probably we should have some common list files for xcomp and xserver.

fix MKDEBUG=yes builds on dreamcast.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.16.12;
Build radeon and nouveau drivers on evbarm.

Give package name to xcomp machine dependency files

enable EGL and glamor. partly from maya@.

for x86 and evbarm:
- install headers and libEGL
- install xorg-server glamoregl component
- link xorg drivers against gbm/egl

bonus fix:
- fix some wrongly marked compatx11file files


build tested on shark, sgimips, evbarm64-el, amd64 and i386.
run tested on radeon, intel and nvidia on amd64, including
'modesetting' driver on amd64. however, my systems disable
it due to llvmpipe so i'm not sure what is happening.

lint library for vdpau

move the mesa 18 khrplatform.h header into xcomp/mi.

fix path to khrplatform.h

libvdpau pkg-config file is called vdpau.pc.

this does not need a special rule, just to be named correctly.

- build and install libvdpau and x86 and evbarm.
- add khrplatform.h for mesa_ver=18 platforms.

need to enable libvdpau.pc generation (needs special rules)


this mostly comes from maya in the first one, and a small part
of the second:

commit 48eb746983a5a7967fba221e7b167808af36f44a
Author: Maya Rashish <maya@NetBSD.org>
Date: Sun Feb 24 09:31:22 2019 +0200

More of vdpau. Cogs spin.

commit d9fbba8f61a43648d32f160c5fa62626788566ff
Author: Maya Rashish <maya@NetBSD.org>
Date: Sat Feb 23 22:36:37 2019 +0200

Adjust for MesaLib 18.

Build llvmpipe driver on x86 (the driver itself is x86-only).
build llvm on all x86, even on GCC builds.
galahad driver removed (upstream).
Don't build mesa 7 at all.

Install more libdrm nouveau headers.

These will be used by mesa 18.

branches: 1.7.16;
add nouveau lint file

Undo previous changes; the debug libraries were installed because of a bug
in the Makefiles... (Setting MKDEBUGLIB in /etc/mk.conf overrides some
Makefile settings)

fix evbarm sets.

Build libdrm_nouveau on evbarm

remove extra lint libraries now that those libraries are private.

fix debug and lint sets for evbarm/arm

branches: 1.1.2;
file md.evbarm was initially added on branch netbsd-6.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.2.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.1.2; 1.1.4;
Add missing MKDEBUG=yes X11 files

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.2.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.1.2; 1.1.6; 1.1.12;
Add lists for ews4800mips and hp300 Xorg servers.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.7.12;
Give package name to xcomp machine dependency files

Fix sets for hp300

branches: 1.5.14; 1.5.16;
fix lint and debug sets

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.3.4; 1.3.10;
Add lists for ews4800mips and hp300 Xorg servers.

branches: 1.2.24;
* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.3.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.2.6; 1.2.12;
Prepare Xorg build for hpcarm. Note old xfree files are still preserved.

fix MKDEBUG=yes build for hpc*

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.3.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.2.6; 1.2.12;
Prepare Xorg build for hpcmips and hpcsh. Old xfree files are still preserved.

fix MKDEBUG=yes build for hpc*

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.4.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.3.6; 1.3.12;
de-tab

Prepare Xorg build for hpcmips and hpcsh. Old xfree files are still preserved.

fix MKDEBUG=yes build for hpc*

x11: Separate concepts of having EGL and having glamor/DRMKMS

EGL is becoming an increasingly popular API and it makes sense to
offer it as standard - the package builds suffer otherwise.
It seems to work fine on sparc64 and other ports that don't use
DRMKMS.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.62.12;
Give package name to xcomp machine dependency files

enable EGL and glamor. partly from maya@.

for x86 and evbarm:
- install headers and libEGL
- install xorg-server glamoregl component
- link xorg drivers against gbm/egl

bonus fix:
- fix some wrongly marked compatx11file files


build tested on shark, sgimips, evbarm64-el, amd64 and i386.
run tested on radeon, intel and nvidia on amd64, including
'modesetting' driver on amd64. however, my systems disable
it due to llvmpipe so i'm not sure what is happening.

lint library for vdpau

move the mesa 18 khrplatform.h header into xcomp/mi.

fix path to khrplatform.h

libvdpau pkg-config file is called vdpau.pc.

this does not need a special rule, just to be named correctly.

- build and install libvdpau and x86 and evbarm.
- add khrplatform.h for mesa_ver=18 platforms.

need to enable libvdpau.pc generation (needs special rules)


this mostly comes from maya in the first one, and a small part
of the second:

commit 48eb746983a5a7967fba221e7b167808af36f44a
Author: Maya Rashish <maya@NetBSD.org>
Date: Sun Feb 24 09:31:22 2019 +0200

More of vdpau. Cogs spin.

commit d9fbba8f61a43648d32f160c5fa62626788566ff
Author: Maya Rashish <maya@NetBSD.org>
Date: Sat Feb 23 22:36:37 2019 +0200

Adjust for MesaLib 18.

Build llvmpipe driver on x86 (the driver itself is x86-only).
build llvm on all x86, even on GCC builds.
galahad driver removed (upstream).
Don't build mesa 7 at all.

Install more libdrm nouveau headers.

These will be used by mesa 18.

branches: 1.54.14;
remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

add missing lint libraries, sort

updates for libdrm 2.4.70. build libdrm_amdgpu on x86.

remove debug/lint sets now that the Makefiles have been fixed.

add lint libraries

remove extra lint libraries now that those libraries are private.

build libdrm_nouveau and xf86-video-nouveau on x86.

crashes early when starting so far.

fix debug and lint sets for i386

sort

branches: 1.45.2; 1.45.6;
sort

Kill lint libraries we don't (or can't yet) produce

branches: 1.43.2;
Mark all _pic.a archive files with the 'picinstall' flag.

This fixes checkflist with MKPICINSTALL=no.

ok christos@.

Sort entries in strcmp order.

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.40.2;
+libxgi_drv.so.1.debug

branches: 1.39.2;
obsolete libxf8_16bpp.

bump libchromeXvMC major to match the other hw libraries to make
libXvMCW happy

build and install libchromeXvMCPro from xf86-video-openchrome

branches: 1.36.2;
In case it's too obvious, the libI810XvMC directory is for building the
libI810XvMC library. Additionally, set list fixes for this and previous
related changes.

+libgeode_drv.so.2.debug for i386.

+libopenchrome_drv.so.0.debug for amd64 and i386.

build libchromeXvMC on x86.

updates for Mesa 7.7.1.

updates for xf86-video-vmware

install libdrm_intel.pc and libdrm_radeon.pc

intall libkms.h into the right place. fix some libdrm_radeon issues.

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Add usr/libdata/debug entries for shared libraries on i386 with Xorg

fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

PR/41991: Joachim Kuebart: add debug libs for libdrm_intel and unmark the
regular lib as profile.

Mark XOrg {ioport,xorgconfig}.debug as obsolete.

put the drm_intel files in the right places.

set lists updates for new libdrm, libdrm_intel.

partly from snj@.

+ioport.debug

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.19.2; 1.19.4; 1.19.8;
Fix entries for XF86VM(3), so that MKMANZ is properly handled. Reported by
Marcin M. Jessa on current-users.

add chooser.debug and xorgconfig.debug entries for xorg when MKDEBUG=yes

Reformat the columns

add several missing i386 xorg files. now i386 sets work again.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- add x11 tag to all entries
- add most of the entries required for xorg (with xorg tag)
- add most of the entries required for debuglib (with debuglib tag)

branches: 1.13.20; 1.13.24;
Implement MKDEBUG:
If "no", don't build and install separate debugging symbols
into /usr/libdata/debug.
Default: no

Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

Move

dpms.h dpmsstr.h xf86misc.h xf86mscstr.h xf86vmode.h xf86vmstr.h libXxf86misc.a
libXxf86vm.a

to mi since always installed.

xf86dga stuff is present in ./mi

x11 set lists mi and md.i386

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

sort files

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

Add MD i386 comp files. Mainly XFree86 extension stuff.

branches: 1.1.2;
Add empty set lists for ports that already have distribution sets.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.2.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.1.2; 1.1.8;
Build luna68k's X.Org server using wsfb driver.
(XXX: needs more hacks to make it actually functional)

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.4.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.3.6; 1.3.12;
fix MKDEBUG=yes builds for mac68k

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add MI and mac68k-specific X11 set lists.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.22.12;
Give package name to xcomp machine dependency files

branches: 1.21.14;
remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.19.2; 1.19.8;
obsolete libxf8_16bpp.

Update macppc list for MKX11+MKDEBUG builds.

fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

remove all references to X11R6-only tools that have R7 ".debug" versions.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.13.2; 1.13.4; 1.13.8;
make these actually correct for xorg.

Reformat the columns

s/.debug/debug/ for tags.

clean up a lot of macppc xorg sets. still not done.

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.

mark all src/x11 built files with "x11" tag.

Add .debug files

branches: 1.5.36; 1.5.40;
Add support for MKCATPAGES=no MKMAN=no MKMANZ=yes MKLINT=no.
Remove unnecessary entries for directories.
Move some catman pages from xbase -> xserver, to match the man pages.

Move

dpms.h dpmsstr.h xf86misc.h xf86mscstr.h xf86vmode.h xf86vmstr.h libXxf86misc.a
libXxf86vm.a

to mi since always installed.

md.macppc x set lists

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

branches: 1.1.2;
Add XF86 4 stuff for macppc.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Installation set lists for port-mvme68k.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.7.6; 1.7.12;
fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.5.2;
Fix set lists for XFree86 on netwinder.

branches: 1.4.2;
fix netwinder sets for xorg

Reformat the columns

mark all src/x11 built files with "x11" tag.

branches: 1.1.2; 1.1.22; 1.1.26;
Build XFree86 server on netwinder with a minimal set of generic drivers
(XFree doesn't have a driver for CyberPro cards).

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.3.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.2.4; 1.2.10;
Prepare xorg files for newsmips. It will work with standard wsfb driver.

fix MKDEBUG=yes builds for newsmips and mmeye.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

created for the initial snapshot.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.3.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.2.6;
Add missing x11 tag for xfree debug files, and add xorg debug files.

branches: 1.1.6;
fix MKDEBUG=yes builds for mvme68k, x68k, ofppc and sun3.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.4.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.3.6; 1.3.12;
fixes for MKDEBUG=yes on pmax.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.10.2; 1.10.8;
obsolete libxf8_16bpp.

fix MKDEBUG=yes for X11R7 libs

fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

remove all references to X11R6-only tools that have R7 ".debug" versions.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.4.2;
add Xorg stuff

branches: 1.3.2;
Reformat the columns

mark all src/x11 built files with "x11" tag.

branches: 1.1.36; 1.1.40;
Add sgimips specific contents for xsets.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Undo previous changes; the debug libraries were installed because of a bug
in the Makefiles... (Setting MKDEBUGLIB in /etc/mk.conf overrides some
Makefile settings)

fix shark sets

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.13.2; 1.13.8;
obsolete libxf8_16bpp.

Add missing xorg debug modules. While here, sort list.

fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.9.4;
Fix entries for XF86VM(3), so that MKMANZ is properly handled. Reported by
Marcin M. Jessa on current-users.

Reformat the columns

- fix set lists for xorg/shark
- remove some non-mi stuff that snuck into xbase/mi

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

- fix the "tag" list i got wrong earlier - it is comma separated.

mark all src/x11 built files with "x11" tag.

branches: 1.3.36; 1.3.40;
Add missing files

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

md.arm32 -> md.shark

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.12.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.11.6;
Kill dup lines.

Add Xorg modules debug entries.

branches: 1.9.2; 1.9.8;
fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

remove all references to X11R6-only tools that have R7 ".debug" versions.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.5.2;
XF86VidMode stuff built on sparc.

branches: 1.4.14;
Move

dpms.h dpmsstr.h xf86misc.h xf86mscstr.h xf86vmode.h xf86vmstr.h libXxf86misc.a
libXxf86vm.a

to mi since always installed.

sparc x set lists

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.15.12;
Give package name to xcomp machine dependency files

branches: 1.14.14;
remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.12.2; 1.12.8;
obsolete libxf8_16bpp.

updates for Mesa 7.7.1.

don't build xf86-input-void; it is obsolete since xorg-server 1.4.

Fix MKDEBUG=yes library builds for sparc64 X11R7

fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

remove all references to X11R6-only tools that have R7 ".debug" versions.

merge all the changes for xorg-server 1.6

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.4.2; 1.4.4; 1.4.8;
add xorg stuff

mark all src/x11 built files with "x11" tag.

branches: 1.2.36; 1.2.40;
+ update list for libXxf86misc 1.1
+ remove libXxf86misc and libXxf86vm from sparc64 they aren't md.

md.sparc64 x set lists

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.4.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.3.6; 1.3.12;
fix MKDEBUG=yes builds for mvme68k, x68k, ofppc and sun3.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

See md.sun3

Add empty set lists for ports that already have distribution sets.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.4.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.3.2;
MKDEBUG fallout for vax.

branches: 1.2.26;
* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.4.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.3.6; 1.3.12;
fix MKDEBUG=yes builds for mvme68k, x68k, ofppc and sun3.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Add empty set lists for ports that already have distribution sets.

x86_64 -> amd64

Set lists for XF4 on x86_64. Not quite a perfect match, since libGLU
isn't built shared (no shared libstdc++ because of external toolchain).

distrib/sets/lists: Add a blank comment line between RCS id and body.

This serves as a buffer between RCS id changes and other changes to
the set lists, in an attempt to reduce the pain of merge conflicts
around mass set list changes.

No functional change intended.

branches: 1.2.46;
Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.1.6; 1.1.12;
fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

x11: Separate concepts of having EGL and having glamor/DRMKMS

EGL is becoming an increasingly popular API and it makes sense to
offer it as standard - the package builds suffer otherwise.
It seems to work fine on sparc64 and other ports that don't use
DRMKMS.

updates for libxcb / xcb-proto 1.17.0.

libpthread-stubs is now a pkg-config.pc only package.

mark the old library obsolete (it only had pthread_condattr_init
which is in libpthread.) as a static-only library, not an issue
for binary compatibility.

branches: 1.244.2;
add some obsolete files to set lists

mark more of libXxf86misc obsolete

unhook libXxf86misc from the build and mark obsolete

library has no users in src or pkgsrc, it's primarily useful for
managing input devices on mid-2000s xfree86 servers

Put back xorg_server_ver=110 specific files lost in 21.1.3 updates.

Also fix syspkg names and reorder entries for readabilities.
Fixes "fail to load libfb.so" errors on X.org 1.10 server ports.

Ok'ed by mrg@ on tech-x11@:
https://mail-index.netbsd.org/tech-x11/2024/01/24/msg002434.html

Should be pulled up to netbsd-10.

mark gl_mangle.h and glx_mangle.h as mesa_ver=19.

branches: 1.239.2;
add new libXpresent manuals.

install new xorgproto files.

updates for xorg-server 21.1.3.

build and install libxcvt, and it's cvt(1).

updates for xcb-proto 1.15.2.

updates for libdrm 2.4.112.

libXcursor: Add missing MLINKS.

libXrandr: Add missing MLINKS.

libX11: Add missing MLINKS.

libXi: Bring back manual pages.

libXxf86vm: Add missing XF86VidModeAddModeLine.3 mlink.

libXv: add missing man pages added in libXv-1.0.5

While here, split MAN and MLINKS into individual += assignments and
sort them.

libXext: Fix MLINKS for XShape.3

XShapeQueryExtension.3 and XShapeQueryVersion.3 are not conjoined twins.
While here split XShape.3 links into separate MLINKS += src dst assignments
and sort them.

glu_mangle.h is obsolete now.

remove mesa < 18 support

Fix "build.sh syspkgs" build error

branches: 1.223.2;
Reintroduce the support of MKCATPAGES

Requested by <mrg>

Remove catman pages support

No longer relevant after the MKCATPAGES removal.

xorg: retire XTrap library and sample clients

the DEC-XTRAP extension is deprecated since 1994, so modern X servers do
not support it

the library was removed from pkgsrc last year and is not required by
anything not-sample-client related in src

if you try to query the protocol on netbsd, you get the following:

$ xtrapproto
Display: :0.0
Warning: Can't load DEC-XTRAP extension
xtrapproto: could not initialize extension

xorg: obsolete libXevie

this is a library for an X server extension that the modern Xorg server
does not have.

it no longer has any users in src or pkgsrc.

Unhook libglut (MesaGLUT) from the build.

The GL Utility Library was formerly a core part of most OpenGL
distributions.

Originally, this version of libglut was developed as part of Mesa (the
primary OpenGL implementation used in NetBSD) before it was mostly abandoned
and work moved to the freeglut fork. It provides a platform-neutral way of
creating OpenGL contexts, something that many other libraries can also do
today (e.g. SDL, glfw).

All users in pkgsrc have been switched to the freeglut fork and there are no
remaining users of this library in src. If having a GLUT implementation in
base turns out to be particularly useful outside of compatibility with
previous NetBSD versions, we can import freeglut (which, AFAIK, is also
ABI compatible with MesaGLUT).

Build fixes for freetype 2.10.4

install dmxproto.pc and dpmsproto.pc

Fix incorrect package name in xcomp

Fix incorrect package name, lacked category prefix.

Give syspkg names to lintlib packages

Give syspkg names to xcomp all online manuals

Give syspkg names. catman, htmlman, man are remaining

Give syspkg's names to xcomp mi files until extensions.

branches: 1.210.2;
Add ftcolor.h to build from freetype2.

update for libepoxy 1.4.3.

enable EGL and glamor. partly from maya@.

for x86 and evbarm:
- install headers and libEGL
- install xorg-server glamoregl component
- link xorg drivers against gbm/egl

bonus fix:
- fix some wrongly marked compatx11file files


build tested on shark, sgimips, evbarm64-el, amd64 and i386.
run tested on radeon, intel and nvidia on amd64, including
'modesetting' driver on amd64. however, my systems disable
it due to llvmpipe so i'm not sure what is happening.

move the mesa 18 khrplatform.h header into xcomp/mi.

- build and install libvdpau and x86 and evbarm.
- add khrplatform.h for mesa_ver=18 platforms.

need to enable libvdpau.pc generation (needs special rules)


this mostly comes from maya in the first one, and a small part
of the second:

commit 48eb746983a5a7967fba221e7b167808af36f44a
Author: Maya Rashish <maya@NetBSD.org>
Date: Sun Feb 24 09:31:22 2019 +0200

More of vdpau. Cogs spin.

commit d9fbba8f61a43648d32f160c5fa62626788566ff
Author: Maya Rashish <maya@NetBSD.org>
Date: Sat Feb 23 22:36:37 2019 +0200

Adjust for MesaLib 18.

Build llvmpipe driver on x86 (the driver itself is x86-only).
build llvm on all x86, even on GCC builds.
galahad driver removed (upstream).
Don't build mesa 7 at all.

Fix MKCATPAGES=yes build

Register missing files in distribution sets.

html3 suffixes are .html

add html pages to match the previous (not tested)

- install fontconfig 2.13.1 files and new fc-conflist
- move libuuid_ul stuff into its srcs.mk and link directly into libfontconfig.
- update reachover
- update man page list

more headers only in 120

update for xorg-server 1.20.3:
- add new files
- re-mark them as 120 not 118

branches: 1.199.2;
Add missing xcb files to build.

Fixes xsrc/53337.

Adjust for freetype 2.9.1

Adjusting non-freetype because ftbase.c now includes ftfntfmt.c.
pickup pkgconfig version from pkgsrc pkgconfig file.

obsolete fontcacheproto.
prepare for xorgproto - split the non replaced list out.

sort, add missing lint file

mark fontcache files as obsolete.

build and install libXfont2.

stop building libXfontcache as it is obsolete for a decade.

branches: 1.192.10;
Fix previous.
- xevie.pc is for libXevie, not for libxcb-xevie.
- obsolete lint file.

build fixes and updates for libxcb / xcb-proto 1.12.

install libsync.h. new in libdrm 2.4.75.

branches: 1.189.2;
Tag cleanup: if the last column contains 'obsolete', the one before should too.

move xtrans.m4 to comp, since it gets installed with the headers.

More sets list sorting (maybe this time they're really all done)

mark all the xorg-server 1.10 specific files as obsolete for xorg-server 1.18.

being to adapt not ready or not switched ports more to 1.18.

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

dix-config.h is obsolete

add missing lint libraries, sort

teach the build about glamor and install glamor.h.
fix SDK_REQUIRED_MODULES for xorg-server 1.18.

build and install libepoxy

updates for libdrm 2.4.70. build libdrm_amdgpu on x86.

sets lists updates for xorg-server 1.18. mark the obsolete files
with xorg_server_ver=110 and the new-only files with 118.

build libxshmfence.

branches: 1.177.2;
Adjust to new freetype-2.6.3

Install ftttdrv.h, which was apparently overlooked at some point
(probably because it contains little of substance...) PR 50902.

install nouveau.h

move the obsolete list files into their respective sets. this means
that if you install a new set and run "postinstall fix obsolete"
the expected things happen.

(hi 12.5 year old me who thought base was better than etc set, which
it really was, but this is better again :-)

build libXpresent.

updates for freetype 2.6.

add missing lint library

another one bites the dust

fix lint sets.

X11 libs liblisp, libmp, libre are no longer installed and are now obsolete.

Add MKCOMPATX11 knob for making X11 compat libraries.

More compat changes. Add compat dirs to each set.

Support building the xorg X11 libraries under MKCOMPAT.
Add XORG_MACHINE_ARCH to compat's bsd.*.mk
Turn xorg makekeys and makestrs into real host tools which are installed into
${TOOLSDIR}

Remove empty line added in previous.

add missing library

don't install X11/Xaw/Print.h and X11/Xaw/PrintSP.h. they haven't been
included upstream since libXaw 1.0.5 (released in 2008) and are useless
in this Xprint-less world.

add gbm.pc

Add libgbm (hi Jared!)

Build and install Mesa GBM buffer management library (libgbm).

install xcb/xkb.h

don't install Xtransdnet.c or Xtransos2.c, which were last part of xtrans
1.2.1.

In recent freetype2 installation, ft2build.h should be located
under include/freetype2.

This change should fix non pkg-config build that uses freetype2,
for example, pkgsrc/lang/openjdk8.

netbsd-7 has also this problem.

libglapi_p.a belongs in profile.

update sets and reachover makefiles for mesa 10.3.5.

Install fbpict.h
(e.g., new xf86-video-intel assumes it exists if RENDER is defined)

branches: 1.152.2;
sort

branches: 1.151.2;
Install compositeext.h and shmint.h from X.org.

Add a few xorg lint libraries.

merge freetype 2.5.3.

updates for libdrm 2.4.52.

merge libxcb 1.10 and libpthread-stubs build.
update the libxcb generated files.

merge xtrans 1.3.3 (deletes Xtranstli.c -- so sad, bye bye.)

updates for libX11 1.6.2, dri3proto and presentproto, and fix
the libXrender build.

Sort entries in strcmp order.

rename (new) xorg_drivers to xorg_server -- platforms that build the
actual Xorg server (aka "xfree86 server").

move the list of these platforms from xorg-server/Makefile.common to
bsd.own.mk, so that we can access it easily in distrib.

this should fix most of the current build failures.

add support for MKXORG_DRIVERS/xorg_drivers keyword, and use it to
mark the xf86-input-mouse files not all platforms use.

updates for freetype 2.4.12 and pixman 0.30.0.

spell the new header properly.

add new files for xf86-input-mouse 1.9.0.

install libXdmGreet.so so xdm works again.
requires linking xdm with --export-dynamic.

add fontconfig 2.10.2 files.

update for libxcb and libXrandr updates

Add a new "debug" set that gets built when ${MKDEBUG} is set. On evbarm:
-rw-r--r-- 1 root src 35806068 Jan 16 10:47 base.tgz
-rw-r--r-- 1 root src 57374069 Jan 16 10:48 comp.tgz
-rw-r--r-- 1 root src 101286193 Jan 16 10:49 debug.tgz
...
This allows always building the debugging code and libraries but not
installing it (although now it is placed in the default sets if ${MKDEBUG}
is set

branches: 1.134.2;
Move "libexpat" from X11 into base which fixes PR lib/40346.
This change was approved by the Core Group.

branches: 1.133.2; 1.133.4;
hook xsetwallpaper into xorg build

When xprint was nuked, the .pc files from the libs were accidentally
removed from here instead of marked obsolete, so the files hang
around; this causes pkgsrc to think e.g. that a builtin libXprintUtil
is present, but it isn't really, so certain obscure and unimportant
packages fail to build. Bring the entries back marked obsolete. ok mrg

obsolete renderedge.h and xaaWrapper.h

remove bstore*.h, add Xprintf.h and inpututils.h

XtAsprintf.0 is in X11R7 / xorg.

updates for freetype 2.4.5

adjust for new XtAsprintf manual. sort set list.

move xorg-server.m4 into the xserver set, and mark it 'xorg'.

fixes non-xorg-server builds.

install xorg-server.m4 at the request of jmcneill.

add missing x11-xcb.pc.

enable USE_XCB in libX11.
install missing libX11-xcb and Xlib-xcb.h.

branches: 1.122.2;
note the libXvMCW lint file too

Build and install the XvMC wrapper library libXvMCW.

install an empty date.def, like the xorg package does. PR#44158.

+fc-{query,scan}.debug

- remove README.DIR, README.rapidaccess.
- add README.modes.
- add new xorg-server headers.
- obsolete XKeysymDB.

install dri.pc.
put the Mesa version into it's own makefile, and share it. there
are now 4 references to it.

obsolete lbx.h, lbxstr.h and lbximage.h

remove deprecated xft-config, fix xsm locations, don't install lbx
headers, instal Xmu/WhitePoint.h.

install lndir again. (hooray, i've missed this stupid app ;-)

re-enable shapestr.h and syncstr.h, from xextproto 7.1.2.

oops, install all the xcb-util headers.

build and install libxcb and xcb-util libraries.

Install pkgconfig file for xkeyboard-config.

updates for Mesa 7.7.1.

install libdrm_intel.pc and libdrm_radeon.pc

add llib-ldrm_radeon.ln

intall libkms.h into the right place. fix some libdrm_radeon issues.

deal with libdrm 2.4.40: new / moved headers, libdrm_radeon.

obsolete a bunch of obsolete man pages. missed in update builds...

install GL/internal/sarea.h and GL/internal/dri_interface.h, like Mesa does.

merge various Xorg package updates, mostly Xext and friends.

fix MKDEBUG=yes builds for bebox, prep, rs6000, alpha, cats, macppc,
netwinder, shark, sparc* and zaurus. (the other changed files were
already working, but wrong.)

Move libdrm headers up one level (out of the X11 directory) to match
the rest of the world and fix the inconsistency with libdrm.pc.
Fixes PR xsrc/42126.

+bdftruncate.debug

install geext.h.

fix the prior change to add MKX11FONTS support.

implement MKX11FONTS for Xorg.

merge all the changes for xorg-server 1.6

merge libXfont 1.4.0.

install dri2proto headers.

put the drm_intel files in the right places.

set lists updates for new libdrm, libdrm_intel.

partly from snj@.

mark xorg-only obsolete files with "obsolete,xorg" so that they are
not obsoleted for xfree86 builds, leading to checklist complaining
about those files being missing.

also obsolete Xp lint files for xorg.

delete lbxutil and lbxproxy.

part two of excising Xprint support from native xorg:

- delete libXp, libXprintAppUtil and libXprinUtil
- delete printproto
- delete xphelloworld, xplsprinters, xprehashprinterlist,
xpsimplehelloworld and xpxthelloworld


i'll be removing the sources shortly.

in preparation for removing Xprint:
- retire libXaw8
- remote Xprint support from xmore
- bump libXaw7 to major 10 so that "libXaw.so" gets a new SONAME, and
make it the "libXaw" used.


XXX: this probably should be pulled up to netbsd-5, which is why i have
XXX: separated it out from the general Xprint removal

Fix typo: s/fftadvanc/ftadvanc/

Update for freetype-2.3.9.

Fix tag for html man files.

Fix tag for catman files.

add the new Xi manuals.

Remove garbage line that prevents 'build.sh release' from working. The
line contains only a single character 'P' and there is no such file in
the $DESTDIR

more missing debuglibs.

add debug libs.

Try to cleanup the sets to allow ports without X11R7 servers to build:
- Xnest is mi, cvt and gtf are not
- Man pages are (mostly) mi

branches: 1.76.2;
Register files installed for libglut.

x11,xorg,lint doesn't work, as the keywords are AND'ed together; you have to
split the entries onto separate lines. Problem pointed out by Jukka Salmi.

Move all the xorg/x11 linty stuff from comp/mi -> xcomp/mi

add entries for MKDEBUG=yes
- xmlwf.debug
- fc-match.debug
- fc-cat.debug

sort

branches: 1.71.2;
Fix a file name who lost its extension. Noted by mrg@.

Install API manual pages for fontcnfig as well as fonts-conf(5).

Install manual pages for libXScrnSaver.

Install manual pages for libXau.

Install manual pages for libXcomposite.

Install manual pages for libXevie.

Install manual pages for libXext.

Install manual page for libXfixes.

Note installation of xft-config.

Install manual pages for libXi.

Install manual pages for libXinerama.

Install manual pages for libXp.

Install manual pages for libXres.

Install manual pages (the 267 of them) of libXt.

Install manual pages for libXtst.

Install manual pages for libXv.

Install manual pages for libXxf86misc.

Add previously not installed headers.

Move freetype-config to xcomp, and note installation of xft-config, with
manual.

Obsolete libXres* as they were mistakenly installed with the wrong name.

NOTE: As nothing should have linked against this, it should be ok to
obsolete the major shared library, which I've done contrary to the
usual rules for such files.

The library provided by the libXres package is actually XRes, and not Xres.

Consistency(R) is a trademark of the X.Org Foundation.

ioport.debug does not belong in the mi set

Register the build of libOSMesa for native X.Org.

Add pkgconfig files.

install libX11 man,cat,html pages

add xorg list entries for xinput binary and manpages

Add profile tag to libfoo_p.a xorg libraries.

add entry for xorgversion.def that is now installed

add chooser.debug and xorgconfig.debug entries for xorg when MKDEBUG=yes

+rgb.debug

Reformat the columns

Entries for HTML man pages generated with MKHTML=yes.
PR 29233

move pic archives from mi to shl.mi (where they belong)

move xorg library entries from xcomp to xbase (where they belong)
- shl.mi should contain lib.so.<maj>.<min>.<tiny>
- shl.elf should contain lib.so and lib.so.<maj> links

add the last of the xorg list entries

put CVS $Id$ back in the right place, fix empty comment lines after last sort

- add debuglib tag to appropriate xorg entries

- add debug tag to appropriate entries

- add x11 tag to all entries
- add most of the entries required for xorg (with xorg tag)
- add most of the entries required for debuglib (with debuglib tag)

sort various files (before adding new entries)

branches: 1.31.2; 1.31.6; 1.31.10;
Add a note about marking entries as "obsolete", instead of deleting them.

Remove systrace. Ok core@.

branches: 1.29.8;
rename 2 installed files in xsrc which may have case conflicts in $DESTDIR
/usr/X11R6/bin/xdmx -> /usr/X11R6/bin/dmx
/usr/X11R6/include/X11/bitmaps/Stipple -> /usr/X11R6/include/X11/bitmaps/Stippler

Implement MKDEBUG:
If "no", don't build and install separate debugging symbols
into /usr/libdata/debug.
Default: no

The last of the changes for missing files in i386 vs xsrc.

+ build libafb for i386 (like xsrc does)
+ hook getconfig into the build
+ add new input driver acecad
+ add new xkb symbols
+ add new font encodings

Add Xdmx server, libraries and utilities to reachover set lists.

Update reachover build framework set list for XFree86 4.5.0.

branches: 1.24.2; 1.24.6;
Fix up botches in X userland from upgrade from XFree86 4.3.0 -> 4.4.0.
(All paths are relative to usr/X11R6)

* Obsolete:
bin/fontconfig-config

* Add directories:
lib/X11/locale/zh_CN.UTF-8
lib/X11/xkb/geometry/ibm

* Rename include/freetype2/ft2build.h to include/ft2build.h and obsolete former

* Add files:
fonttosfnt(1) program & man page
include/expat.h
lib/X11/app-defaults/XClock-color
lib/X11/fonts/TTF/Vera*.ttf
some font encodings
zn_CN.UTF-8 locale
some font encodings
various xkb config files
lib/X11/xedit/lisp/progmodes/patch.lsp
Xfontcache(3) and various links
XDGA(3) and various links
XRes(3) and various links
Xss(3) and various XScreenSaver*(3) links

* Add some more TODO items

* Clean up lib/expat build now that the version is hard coded.