* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Add this while here.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

md.arm32 -> md.shark

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

RCS police

branches: 1.3.2;
Now that the SHARK X server builds out of xsrc we need a few more files
in the X sets.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

add local directories installed by XF86 3.3.3. (From fvdl)

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

branches: 1.1.2;
Split X fonts out into a separate distribution set.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

branches: 1.1.2;
Add XF86 4 stuff for macppc.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

Installation set lists for port-mvme68k.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

created for the initial snapshot.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

md.arm32 -> md.shark

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

See md.sun3

branches: 1.1.2;
Split X fonts out into a separate distribution set.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

* remove empty md.* files now that makeflist supports non-existant md.* files
* factor all m68k common stuff into lists/*/ad.m68k
XXX: this should be done for mips (when it's not just the pmax), and
powerpc (when there's a powerpc port put here ...)

branches: 1.1.2;
Split X fonts out into a separate distribution set.

setlist changes for new fonts (missed in previous commit)

setlist changes for new fonts

install new iso8859-14.enc.gz.

branches: 1.46.8;
Fix "build.sh syspkgs" build error

branches: 1.45.2;
Hook up font-liberation-ttf to the build.

license ok'd by board.

Generate oldschool Latin-1 variants of Spleen fonts.

Needed so ctwm can load them. ctwm uses XCreateFontSet which for some
reason seems adverse to returning UTF-8 fonts...

hook up X11 "Spleen" fonts to the build

remove all the X11R6 (old xfree86) entries.

a technically more correct solution would be to mark all but the
shared libraries obsolete, but with approximately 10000 entries
it would significantly slowdown postinstall obsolete checking
and as an end-user, i'm not sure i'd want it anyway.

this also makes it much easier to automate X11R7 changes ;-)

move the obsolete list files into their respective sets. this means
that if you install a new set and run "postinstall fix obsolete"
the expected things happen.

(hi 12.5 year old me who thought base was better than etc set, which
it really was, but this is better again :-)

Build and install iso10646-1 encoded 10x20 font. This matches the behaviour
of the upstream software and modular X.org in pkgsrc.

Patch supplied by Piotr Meyer in PR xsrc/46755.

branches: 1.39.6; 1.39.8;
Install 'symbol' from font-adobe-(75|100)dpi.
Should fix some symbols in xcalc.

To do: transform these and other currently-installed-only-as-bdf fonts
to pcf.gz.

More consistency with obsolete tag:
it should be only be accompanied by gcc={3,4} or {xorg,x11}, and only
if they are necessary, i.e. if the same line exists for the other setting
of gcc or xorg/x11.
Make it so.

fix the prior change to add MKX11FONTS support.

implement MKX11FONTS for Xorg.

- build and install swrast_dri.so
- don't force linking dri_util.c into swrast_dri.so
- fix the source lists in libGL/OSmesa makefiles
- unobsolete the symbols/pc keymap and 7x14-KOI8-R.pcf.gz font

XXX the libGL/OSmesa makefiles could use some reorg. there
XXX are a bunch of duplicated items.

Install the "sony-misc" font from the X.org distribution.
Patch supplied by Takeshi Nakayama in PR xsrc/40476.

Correctly mark files obsolete.

The extra fonts have gone away again, probably due to changes being made
to make(1). Mark them 'obsolete'.

Remove duplicate entry for 7x13.pcf.gz

Update for new sizes of KOI8-R, ISO8859-8 and ISO8859-11

branches: 1.29.2;
Reformat the columns

add entries for ./etc/mtree/set.x{server,font,etc} when MKXORG=yes

remove trailing ^M chars that snuck in

- add x11 tag to all entries
- add most of the entries required for xorg (with xorg tag)

branches: 1.25.2; 1.25.6; 1.25.10;
Add a note about marking entries as "obsolete", instead of deleting them.

branches: 1.24.12;
Another fix for MKSHARE=no. (broken a while ago in rev 1.17. hi rtr!)

Fix for MKSHARE=no

The last of the changes for missing files in i386 vs xsrc.

+ build libafb for i386 (like xsrc does)
+ hook getconfig into the build
+ add new input driver acecad
+ add new xkb symbols
+ add new font encodings

branches: 1.21.2; 1.21.6;
Install VeraIt.ttf, per PR [xsrc/25373] from FUKAUMI Naoki.
Sort xfont/mi, and cleanup whitespace.

Fix up botches in X userland from upgrade from XFree86 4.3.0 -> 4.4.0.
(All paths are relative to usr/X11R6)

* Obsolete:
bin/fontconfig-config

* Add directories:
lib/X11/locale/zh_CN.UTF-8
lib/X11/xkb/geometry/ibm

* Rename include/freetype2/ft2build.h to include/ft2build.h and obsolete former

* Add files:
fonttosfnt(1) program & man page
include/expat.h
lib/X11/app-defaults/XClock-color
lib/X11/fonts/TTF/Vera*.ttf
some font encodings
zn_CN.UTF-8 locale
some font encodings
various xkb config files
lib/X11/xedit/lisp/progmodes/patch.lsp
Xfontcache(3) and various links
XDGA(3) and various links
XRes(3) and various links
Xss(3) and various XScreenSaver*(3) links

* Add some more TODO items

* Clean up lib/expat build now that the version is hard coded.

branches: 1.19.2;
+ add/update files removed between xf43->44 as obsolete

add fonts/Speedo/encodings.dir

update set lists for x11 reachover sets

+ add fonts dirs to set lists

> By adding the directories to the "xfont/mi" list pax will reset
> the directory mtime to the time "build.sh" was run.

Patch from Juergen Hannken-Illjes via lukem@

should resolve pr#24620

Add ./etc/mtree/set.<setname> entry for each set.

Implement `xetc' set to contain configuration that may be changed by
the end-user that we don't want to overwrite when extracting the
other X sets.

remove unnecessary directory

Support MKSHARE=no

more unnecessary directories

remove unnecessary directories from here

x11 set lists mi and md.i386

Separate out the X sets:
* sets for xsrc/xc (XF 3.x)
xbase3 xcomp3 xcontrib3 xfont3 xmisc3 xserver3
* sets for xsrc/xfree/xc (XF 4.x)
xbase4 xcomp4 xcontrib4 xfont4 xmisc4 xserver4
* sets for src/x11 (reachover build of xsrc/xfree/xc):
xbase xcomp xcontrib xfont xmisc xserver
(note: not populated yet, and not to be shared by x*3 or x*4 anymore)

First step of supporting XFree86 4.x binary sets:
- Recognize version dependent X11 lists files.
- Move all files which only belong to XFree86 3.3.6 in lists for version 3.

Add a NetBSD RCS tag to each distrib list file.

Add a couple of new fonts for XFree86 1.3.3

Move some MI stuff to i386 MD files, courtesy of the broken config
files for other ports.

Add various missing files.

branches: 1.2.2;
To be consitent with the other sets:
- use ./usr and not usr
- remove duplicated directory entries

Split X fonts out into a separate distribution set.