all: fix "Invalid internal option" warning from make

branches: 1.4.12;
Correct typo: the directory is named cdroms, not cdrom.

Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.2.18;
use TARGETS+=release and do the installs in the subdirs

Fix shark release building targets.

branches: 1.1.2; 1.1.14;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

Consistently use ${RELEASEDIR}/${RELEASEMACHINE} instead of
${RELEASEDIR}/${MACHINE} (Paul Ripke)

Now that we do not force debug sets off install CDs any more, explicitly
set CDRELEASE_NODEBUG everywhere.

branches: 1.1.2; 1.1.14; 1.1.80; 1.1.82;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.2.34;
add TARGETS+=release

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

Fix shark release building targets.

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

use ARM_ELF2AOUT

branches: 1.23.42; 1.23.44;
Use common ${OBJCOPY_ELF2AOUT_FLAGS}.

Sync with src/sys/arch/shark/conf/Makefile.shark.inc rev 1.14:
> also need to strip out GCC 4.5's new .debug_pubtypes section.
> while here, minor cleanup.

XXX: probably we should have something like ${ARM_AOUT_REMOVE_SECTIONS}
XXX: in bsd.own.mk

Copy ramdisk INSTALL.aout kernel into installation/instkernel in ${RELEASEDIR}
where it had been put and documented. Actually closes PR port-shark/41672.

2nd part of "install kernel -> release" fix, inspired by tsutsui@'s patch
to PR 41672.

Install a.out version of INSTALL kernel in release. Slightly modified
from a patch provided by Izumi Tsutsui as response to PR 41672.

More sections to remove when doing ELF->a.out conversion.

Consistently use gzip with the -n flag so dates are not embedded.

Not tested on all platforms.

branches: 1.16.2; 1.16.4;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.15.12; 1.15.16;
Convert shark's installation kernel image (netbsd-INSTALL) to a.out format
so that it can be loaded by the machine's firmware. Put the resulting
image inside the 'installation/instkernel' release subdirectory, as the
installation instructions explain.

Fixes port-shark/35563.

branches: 1.14.16;
For GCC 3.3.1, need to remove .comment too.

Use objcopy to a.out'ify the install kernel image.

branches: 1.12.2;
- whitespace consistency cleanup
- build (mdset/nm/strip) into ${filename} as one rule, and move ${filename}.gz
into separate rule
- rename MDSET.${filename}.nosymbols -> MDSET_NOSYMBOLS.${filename}
- rename MDSET.${filename}.post -> MDSET_POST.${filename}, and don't do
suffix handling here
- rework suffix handling:
- rename MDSET.${filename}.suffixes -> MDSET_SUFFIXES.${filename},
and change from list of suffixes to list of "suffix cmdtobuildsuffix",
where cmdtobuildsuffix is the name of the variable containing the
command to build ${filename}.${suffix} (available as "${.TARGET}").
- for each ${filename}.${suffix}, depend upon ${filename} and use
${cmdtobuildsuffix} to create the former.
- add separate ${filename}.${suffix}.gz rule
- mipsco & pmax: rename "install.gz" to "netbsd-INSTALL.gz", for
consistency and so the target to build the mdset kernel doesn't get
confused with general "install" target

rather than blocking parallel mdset builds with .WAIT, replace usage of
"netbsd.tmp" with "${.TARGET:R}" (et al)

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

- Rename Makefile.mdset variables:
MDEXTRA_SUFFIXES.${KERNEL} -> MDSET.${FILENAME}.suffixes
${KERNEL.${_K}}.post -> MDSET.${FILENAME}.post
This allows "default" rules for for MDSETTARGETS with FILENAMEs of "-"
by defined MDSET.-.post & MDSET.-.suffixes
- Document the above
- Use the above appropriately in various Makefiles
- Be a be quieter when building these kernels
- Add .WAIT syncs so that multiple kernels aren't built in parallel, because
the temporary filename is the same, and it also avoid hairy magic in
syncing the targets generated from MDSET.${FILENAME}.suffixes with
the master target for that ${FILENAME}

Makefile.mdset:
replace
TARGETS = KERNEL IMAGE [...]
with
MDTARGETS = KERNEL IMAGE FILENAME [...]
If FILENAME is "-", use "netbsd.${KERNEL}" as the target filename

The rest:
Update for new MDTARGETS syntax. In some cases, the kernel
name from the "old" method will be used to override the default.

- don't pull in <bsd.prog.mk> in Makefile.mdset; do that in the caller instead
- renamed optional post-strip action variable from ${KERNEL}.post to
netbsd.${KERNEL}.post

convert to distrib/common/Makefile.mdset

Fix shark release building targets.

Make sure <bsd.own.mk> is pulled in before ${PRINTOBJDIR} is used.

Use ${PRINTOBJDIR}.

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

+= for MAKEFS_FLAGS

branches: 1.21.30; 1.21.34;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Change ramdisks from dhclient to dhcpcd and add corresponding glue to
sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed,
60KB compressed.

branches: 1.14.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

branches: 1.13.12; 1.13.18;
In the shark's installation image, create the bpf device from the
'ramdisk' MAKEDEV goal instead of from a Makefile definition. As there
is just one configuration for the ramdisk, it's better to keep everything
in one place.

Add dhclient to the shark's installation disk image so that we can configure
network interfaces through DHCP in sysinst.

Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

alpha sort some entries

minor tweak

Set DBG=-Os for libhack.

ensure all sysinst-using makefs generated images have at least 15 inodes free,
and be consistent how MAKEFS_FLAGS is defined.

Give the ramdisk some free inodes so that sysinst can create temp
files.

Fix shark release building targets.

convert to new distrib world order. make UNPRIVED= should now work.
(xxx; untested)

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.2.26;
Spell removable with only two es. Inspired by jmc@openbsd.

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

branches: 1.2.32;
netbsd.org->NetBSD.org

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.4.10; 1.4.16; 1.4.78; 1.4.80;
Switch NetBSD/shark's installation kernel and disk image to use wscons
instead of pccons, just like its GENERIC kernel does.

This obsoletes pccons in this platform, which will probably be removed
later.

If running the installer from a serial console, ask the user for the
appropriate TERM value. Otherwise use 'pc3' for local consoles (pccons
or wscons). Based on code from hp300, although that port asks the user
unconditionally.

Fixes PR port-shark/18355.

netbsd.org->NetBSD.org

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

Update location of "less" source directory to the build of various
install medias.

Remove unnecessary gnu/usr.bin path from SRCDIRS.

Use src/distrib/utils/x_gzip in all install ramdisks/miniroots for now
since installation file systems might be flooded by -llzma.

branches: 1.21.4;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Of the arious list files 28 said
PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip
while 14 picked
PROG usr/bin/gzip usr/bin/gunzip usr/bin/gzcat

Make them all choose the former. No functional change.

Fix indent on common/protocols changes.

Change ramdisks from dhclient to dhcpcd and add corresponding glue to
sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed,
60KB compressed.

branches: 1.11.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.9.12; 1.9.14; 1.9.16;
Add dhclient to the shark's installation disk image so that we can configure
network interfaces through DHCP in sysinst.

Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

If running the installer from a serial console, ask the user for the
appropriate TERM value. Otherwise use 'pc3' for local consoles (pccons
or wscons). Based on code from hp300, although that port asks the user
unconditionally.

Fixes PR port-shark/18355.

More crunchgen lists needing -lz now for new gzip.
Noticed by Markus W Kilbinger.

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

consistency cleanup

* mount_mfs is a link to newfs
* Add tset

convert to new distrib world order. make UNPRIVED= should now work.
(xxx; untested)

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

convert to new distrib world order. make UNPRIVED= should now work.
(xxx; untested)

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.

convert to new distrib world order. make UNPRIVED= should now work.
(xxx; untested)

First cut at instkernel for NetBSD/shark. Based on NetBSD/alpha
instkernel.