bump for clang/llvm

PR 59001: bump ramdisk images size slightly for clang builds

Bump ramdisk size to deal with bigger image for new pppd

branches: 1.16.56;
Enable INET6 in the installer

sparc64 with GCC 4.5 has about a 2% code bloat, unfortunately.

bump the instfs size to 9MB.

Provide full terminfo.db on install media

Change ramdisks from dhclient to dhcpcd and add corresponding glue to
sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed,
60KB compressed.

branches: 1.12.18; 1.12.28;
Remove CRUNCHGEN_FLAGS, probably left over from a previous hack to work
around bugs in an older compiler. Nowadays the default -Os works fine.

Do not use -Os when compiling small programs for the miniroot or
install kernel ramdisk image. It triggers some toolchain bug and
causes for example ifconfig to not display inet addresses.

branches: 1.10.2;
fix size of images
(i reduced them during testing and they worked then, but not when i
did a full make release. weird...)

major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

use check_RELEASEDIR

Make sure <bsd.own.mk> is pulled in before ${PRINTOBJDIR} is used.

Use ${PRINTOBJDIR}.

convert sparc64 to use `makefs' rather than vnd/newfs/mount. this severely
cleans up a lot of the processing here.


XXX: note that the sparc64 "INSTALL" kernel's file system has a copy of
GENERIC in /netbsd. fix this shortly.

vnconfig called incorrectly - it wants either a simple "vnd0" or a full path
to a raw device, not a full path to a cooked device.

install the netbsd.INSTALL kernel into the release area as well.

build an "instfs" which can be untarred for complete netboot installs.

+= for MAKEFS_FLAGS

branches: 1.12.30; 1.12.34;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

branches: 1.6.12;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

It is "MAKEDEV bpf" nowadays

branches: 1.4.6; 1.4.12;
Now that -Os is save again, use it.

Do not use -Os when compiling small programs for the miniroot or
install kernel ramdisk image. It triggers some toolchain bug and
causes for example ifconfig to not display inet addresses.

fix problems noted by Love <lha@stacken.kth.se> on current-users@ :
- add bpf0 to MAKEDEVTARGETS
- set dhclient-script and binstall perms to 555

branches: 1.1.2;
major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.2.26;
Spell removable with only two es. Inspired by jmc@openbsd.

major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*

kernfs no longer needs a hacky workaround to make rootdev appear.

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.7.34; 1.7.36;
Switch device database to cdb(5). Rework ttyname(3) and ttyname_r(3) to
depend on new devname_r(3) as heart. Add /dev/pts magic directly to
devname(3). While it can lead to returning non-existing paths, the
behavior is more consistent that way. Drop caching layer in devname(3),
it doesn't buy anything for the common case of having access to the
database. Teach devname(3) proper fallback behavior of scanning /dev.
Create both old-style and new-style database for now in /etc/rc.d/sysdb.

branches: 1.6.4; 1.6.6;
On install CDs: make ^C and ^Z work (mostly) as they used to do on
crunched/ramdisk install media again.
Fixes the remaining parts of PR 44738.

Simplify the console type check by passing -nx to sysctl. Pointed out
by Alan Barrett.

Use sysctl kern.consdev to check wether we use ttyE* as console - in that
case just set up TERM as needed and go straight to sysinst. Otherwise
give a slightly verbose explanation (with common sample values) and
ask for TERM before running sysinst.

branches: 1.3.32;
netbsd.org->NetBSD.org

Add sun-type4 termcap entry and print a hint to change TERM to this
if using a Type 4 keyboard.

major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*

major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*

build an "instfs" which can be untarred for complete netboot installs.

crypto needs pthread.

Add -lssl -lcrypto for new pppd

branches: 1.30.8;
Get back to terminfo.cdb.

Catch up with major bump in terminfo. Unbreak build.

Make gzip on some crunched install media support xz decompression
(just like our base version does).

Now that we do not force debug sets off install CDs any more, explicitly
set CDRELEASE_NODEBUG everywhere.

branches: 1.26.24; 1.26.26;
pppd has moved.

branches: 1.25.2;
Switch terminfo(3) to cdb(5).

branches: 1.24.2; 1.24.4;
Update location of "less" source directory to the build of various
install medias.

Fix indent.

Remove unnecessary gnu/usr.bin path from SRCDIRS.

Use src/distrib/utils/x_gzip in all install ramdisks/miniroots for now
since installation file systems might be flooded by -llzma.

branches: 1.20.4;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Provide full terminfo.db on install media

add mount_tmpfs

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Of the arious list files 28 said
PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip
while 14 picked
PROG usr/bin/gzip usr/bin/gunzip usr/bin/gzcat

Make them all choose the former. No functional change.

Fix indent on common/protocols changes.

Change ramdisks from dhclient to dhcpcd and add corresponding glue to
sysinst. For amd64, the crunchgen binary shrinks by 150KB uncompresssed,
60KB compressed.

branches: 1.9.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.7.12; 1.7.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

Move lfs_cleanerd from /usr/libexec to /libexec. This is to allow putting
the root file system on a LFS volume.

Addresses PR bin/30407. No objections in tech-userlevel@.

add /sbin/raidctl.

Add missing fsck_lfs. While there add -lz to LIBS, which is needed with
the new gzip.

Noticed (and patch provided) by John Heasley.

Now that usr.bin/ftp/Makefile supports SMALLPROG and SMALLPROG_INET6,
we don't need distrib/utils/x_ftp anymore...

fix problems noted by Love <lha@stacken.kth.se> on current-users@ :
- add bpf0 to MAKEDEVTARGETS
- set dhclient-script and binstall perms to 555

branches: 1.1.2;
major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

branches: 1.2.32;
Add sun-type4 termcap entry and print a hint to change TERM to this
if using a Type 4 keyboard.

major overhaul; convert to NDWO.
this needs to build two images and one gzipped tar file:
- install.fs: to mdset into netbsd.INSTALL
- inst.tgz: contents of install.fs
- miniroot.fs: install.fs + gzipped GENERIC kernel. created using a
copy of the crunched ramdiskbin built for install.fs
share much of the miniroot.fs build goop from ../instfs/*