Replace RELEASE and VERSION strings proplery.

sun2 and sun3 don't use MI src/distrib/miniroot/list so this should
have been sync'ed with it.
http://cvsweb.netbsd.org/bsdweb.cgi/src/distrib/miniroot/list#rev1.36
>> Use proper release version strings ("9.1" rather than "91") in banners.
>>
>> Also define and use "MACHINE" variable to describe port names
>> (no uname(1) or sysctl(8) in miniroot binary list by default).

Should be pulled up to netbsd-9.

Drop wide char support to save space

1. Remove all the special handling of variables (-d -p -P -s -S) that
were dealing with DBG (-d) LDSTATIC/NOPIE (-p), and the rest with
disabling/enabling sanitizers.
2. Use emalloc/estrdup for all the allocators instead of only some cases.
3. Add -V varspec which passes variables on the command line (as DBG
and LDSTATIC used to be passed before) instead of appending them
to the on-the-fly Makefile using -v varspec.
4. Change the distrib and rescue Makefiles to use -V instead of the removed
flags.

The motivation of this is to make variable handling consistent, less magical,
and remove the need for changing crunchgen each time we want to add disabling
an option by default.

(as proposed in tech-toolchain)

bump

branches: 1.36.4; 1.36.12; 1.36.14;
+= for MAKEFS_FLAGS

branches: 1.35.2; 1.35.4;
mark fstab .PHONY to prevent it being re-made from fstab.c in suffix rules.

Explicitly build space constrained ramdisk images without unwind tables.

branches: 1.33.6; 1.33.12;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

Replace references to local and now no-longer-existing termcap files
with references to ${DISTRIBDIR}/common/termcap.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

Move sun2, sun3 & x68k across to the common distrib etc/services, and
while here reduce it from 1180 to 794 bytes (whitespace & comment cleanup)

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Use ${TOOL_SED} instead if plain sed in Makefiles.

Fix (currently harmless) typo.

I'm not sure why autobuild (amd64) gets ICE with -Os while it works on i386..

branches: 1.25.12; 1.25.14;
Remove a duplicated option in MAKEFS_FLAGS.
"minfree=0,optimization=space" is defined at
../../common/Makefile.image.

Use src/distrib/common/services so that miniroot fits in 4MB.

Bump the miniroot size from 4M to 4300k so the contents fits again.

Use crunched binary on sun2 miniroot so that miniroot is
now much smaller (18MB -> 4MB).
Installation is tested on TME (with a workaround for uvm_readahead.c bug).

MAKEDEV.subr no longer exists. Don't install it in any ramdisk
or miniroot images.

Add MAKEDEV.subr to IMAGEDEPENDS. These miniroot images should probably
be converted to use common/Makefile.makedev.

branches: 1.19.4;
Bump the miniroot size by 1MB to 18MB so that it fits again.

Bump the miniroot size from 16m to 17m so that the contents fits again.

Increase miniroot size to 16m.

Bump miniroot size from 13M to 15M so that the contents fits again.

miniroot doesn't fit in 12MB anymore, make it 13.
remove fd0 from device list since it doesn't exist.

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

Add support for UFS2. UFS2 is an enhanced FFS, adding support for
64 bit block pointers, extended attribute storage, and a few
other things.

This commit does not yet include the code to manipulate the extended
storage (for e.g. ACLs), this will be done later.

Originally written by Kirk McKusick and Network Associates Laboratories for
FreeBSD.

consistently use "${INSTALLBOOT} -v ..."

don't use ${OBJDIR}, using just 'install.sub' in IMAGEDEPENDS should work fine
add install.sub to CLEANFILES

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Migrate to a distrib framework closer to how other ports work.
Arguably this could be moved to using the distrib/miniroot
infrastructure instead.

XXX: This could benefit from being crunchgen-ed with libhack;
currently it just uses a lot of stuff out of ${DESTDIR}

- call ${INSTALLBOOT} with -m ${MACHINE}
- use check_RELEASEDIR

Converted sun2 to the new distrib world order. It is now
possible to do full release unprivileged cross-builds.

- replace image_md_post: target with IMAGE_MD_POST variable, and use
that after building ${IMAGE}
- use ${IMAGEBUILT} to ensure that IMAGE_MD_POST is only run if IMAGE changes

replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc

Sync with the sun3 distrib code, and fixed many problems
to the point where this is truly useful for building
sun2 releases.

Add MTREE?= to add Makefiles and use when running mtree

Added sun2 distrib files.

Converted sun2 to the new distrib world order. It is now
possible to do full release unprivileged cross-builds.

Added sun2 distrib files.

branches: 1.1.34;
Migrate to a distrib framework closer to how other ports work.
Arguably this could be moved to using the distrib/miniroot
infrastructure instead.

XXX: This could benefit from being crunchgen-ed with libhack;
currently it just uses a lot of stuff out of ${DESTDIR}

Check if /tmp is writable to see whether the rootdev is already mounted.

Creating a dummy /tmp/root_writable file and after mountroot and
checking it on the second installation could be problematic if
users retry to installation after reboot without reinstalling miniroot.
Taken from amiga.

Don't try to add swap on miniroot.

Use proper release version strings ("9.1" rather than "91") in banners.

Also define and use "MACHINE" variable to describe port names
(no uname(1) or sysctl(8) in miniroot binary list by default).

I guess the short format like "91" by ${DISTRIBREV} was used only
for split sets for floppies in 1990's releases.

Worth to pullup to netbsd-9.

The kernel and X sets should be specified in MD miniroot scripts.

Otherwise they are not listed at least on ftp installation.
The problem was reported by Martin Trusler on port-hp300@:
https://mail-index.netbsd.org/port-hp300/2020/11/21/msg000174.html

Should be pulled up to netbsd-9 and netbsd-8.

branches: 1.5.2;
adjust miniroot scripts to deal with the time prefix in dmesg

modernize, and avoid -a -o

branches: 1.3.56; 1.3.64;
Convert TNF licenses to new 2 clause variant

branches: 1.2.20; 1.2.22;
After extracting sets, copy miniroot kernel only if there is
no extracted kernel in the target disk.

Migrate to a distrib framework closer to how other ports work.
Arguably this could be moved to using the distrib/miniroot
infrastructure instead.

XXX: This could benefit from being crunchgen-ed with libhack;
currently it just uses a lot of stuff out of ${DESTDIR}

Use more SMALL binaries and reduce diffs between sun2 and sun3.

Now that we use the "hacked" (non-widechar) curses, drop -lcurses

Revert the previous again; miniroot overflows this time...

- switch to x_disklabel (drop non-native label support)
- switch to x_fsck_ffs and x_newfs (drop byte-swapped and Apple UFS support)
- switch to more

Revert previous; ``fix'' against wrong directory...

Fix ramdisk overflow:

- switch to x_disklabel (drop non-native label support)
- switch to x_fsck_ffs and x_newfs (drop byte-swapped and Apple UFS support)
- switch to more

nvi has moved.

branches: 1.19.2; 1.19.8;
Update location of "less" source directory to the build of various
install medias.

Use src/distrib/utils/x_gzip in all install ramdisks/miniroots for now
since installation file systems might be flooded by -llzma.

branches: 1.17.4;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Relegate edlabel to use in extremely memory constrained install
ramdisks and prefer disklabel elsewhere.
Based on discussion on affected port lists (port-sparc port-sparc64
port-sun3 port-sun2 port-atari port-mvme68k).
All listed ports plus amd64 test built after change

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

Move sun2, sun3 & x68k across to the common distrib etc/services, and
while here reduce it from 1180 to 794 bytes (whitespace & comment cleanup)

Of the arious list files 28 said
PROG usr/bin/gzip usr/bin/gzcat usr/bin/gunzip
while 14 picked
PROG usr/bin/gzip usr/bin/gunzip usr/bin/gzcat

Make them all choose the former. No functional change.

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

usr.bin/vi/build -> usr.bin/nvi/build

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.6.12; 1.6.14;
Use src/distrib/common/services so that miniroot fits in 4MB.

Use crunched binary on sun2 miniroot so that miniroot is
now much smaller (18MB -> 4MB).
Installation is tested on TME (with a workaround for uvm_readahead.c bug).

MAKEDEV.subr no longer exists. Don't install it in any ramdisk
or miniroot images.

Treate MAKEDEV.subr just as we treat MAKEDEV when creating ramdisk
images or miniroot images.

branches: 1.2.16;
As parselist.awk now sets COPY-ied files explicitly to 444, ensure
executable files are 555.

branches: 1.1.2;
Migrate to a distrib framework closer to how other ports work.
Arguably this could be moved to using the distrib/miniroot
infrastructure instead.

XXX: This could benefit from being crunchgen-ed with libhack;
currently it just uses a lot of stuff out of ${DESTDIR}

Migrate to a distrib framework closer to how other ports work.
Arguably this could be moved to using the distrib/miniroot
infrastructure instead.

XXX: This could benefit from being crunchgen-ed with libhack;
currently it just uses a lot of stuff out of ${DESTDIR}

Converted sun2 to the new distrib world order. It is now
possible to do full release unprivileged cross-builds.

branches: 1.1.34;
Migrate to a distrib framework closer to how other ports work.
Arguably this could be moved to using the distrib/miniroot
infrastructure instead.

XXX: This could benefit from being crunchgen-ed with libhack;
currently it just uses a lot of stuff out of ${DESTDIR}

branches: 1.2.32;
netbsd.org->NetBSD.org

Migrate to a distrib framework closer to how other ports work.
Arguably this could be moved to using the distrib/miniroot
infrastructure instead.

XXX: This could benefit from being crunchgen-ed with libhack;
currently it just uses a lot of stuff out of ${DESTDIR}

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

branches: 1.1.34;
Migrate to a distrib framework closer to how other ports work.
Arguably this could be moved to using the distrib/miniroot
infrastructure instead.

XXX: This could benefit from being crunchgen-ed with libhack;
currently it just uses a lot of stuff out of ${DESTDIR}