| History log of /src/distrib/utils/embedded/files |
| Revision | Date | Author | Comments |
| 1.2 | 27-Aug-2018 |
jmcneill | Install ELF kernel to the FFS partition and boot it with bootaa64.efi
instead of loading kernel.img from the MSDOS partition with extlinux.conf
|
| 1.1 | 01-Apr-2018 |
ryo | branches: 1.1.2; 1.1.4;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
|
| 1.1.4.1 | 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.1.2.3 | 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|
| 1.1.2.2 | 07-Apr-2018 |
pgoyette | Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
|
| 1.1.2.1 | 01-Apr-2018 |
pgoyette | file arm64_extlinux.conf was added on branch pgoyette-compat on 2018-04-07 04:11:57 +0000
|
| 1.15 | 27-Oct-2019 |
jmcneill | Switch to GENERIC kernels only.
|
| 1.14 | 04-Apr-2019 |
jmcneill | branches: 1.14.2;
Re-enable efiboot for armv7 (thanks skrll@)
|
| 1.13 | 02-Apr-2019 |
jmcneill | Turn off efiboot until we figure out why it fails on some boards.
|
| 1.12 | 30-Mar-2019 |
jmcneill | Switch to efiboot
|
| 1.11 | 05-Jan-2019 |
aymeric | Rename the DE0 Nano SoC dts file to its new linux/uboot name
|
| 1.10 | 03-Jan-2019 |
jmcneill | Fix mmcpart for exynos SD card
|
| 1.9 | 22-Nov-2018 |
aymeric | Make armv7.img boot on the DE0 Nano SoC. Requires u-boot from -current pkgsrc.
|
| 1.8 | 01-Nov-2018 |
skrll | Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.
While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img
|
| 1.7 | 20-Oct-2018 |
skrll | Sort
|
| 1.6 | 04-Jul-2018 |
jmcneill | Enable booting of netbsd-EXYNOS kernel
|
| 1.5 | 06-Jan-2018 |
jmcneill | branches: 1.5.2; 1.5.4;
Enable automatic booting on tegra210
|
| 1.4 | 18-Dec-2017 |
jmcneill | No need to specify console=fb for pinebook anymore as WSDISPLAY_MULTICONS will give us a framebuffer console
|
| 1.3 | 16-Dec-2017 |
jmcneill | Use fb console by default on Pinebook
|
| 1.2 | 08-Oct-2017 |
sevan | Fix test otherwise we try to load a fdtfile for boards which do not have use_fdt set.
|
| 1.1 | 07-Oct-2017 |
jmcneill | Install a boot.scr on armv7.img that detects the running board and selects
the correct kernel and boot protocol. Should work on tegra, sunxi, and
am335x boards for now.
|
| 1.5.4.2 | 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.5.4.1 | 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.5.2.3 | 18-Jan-2019 |
pgoyette | Synch with HEAD
|
| 1.5.2.2 | 26-Nov-2018 |
pgoyette | Sync with HEAD, resolve a couple of conflicts
|
| 1.5.2.1 | 28-Jul-2018 |
pgoyette | Sync with HEAD
|
| 1.14.2.1 | 27-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #491):
sys/arch/evbarm/conf/BEAGLEBOARD_INSTALL: file removal
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.2
sys/arch/arm/ti/ti_sysc.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.2
sys/dev/i2c/tps65950.c: file removal
sys/arch/evbarm/conf/std.ti: file removal
sys/dev/i2c/files.i2c: revision 1.101
sys/dev/i2c/files.i2c: revision 1.102
sys/dev/i2c/at24cxx.c: revision 1.32
sys/dev/i2c/files.i2c: revision 1.103
sys/dev/i2c/twl4030.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.104
sys/dev/i2c/twl4030.c: revision 1.2
sys/dev/i2c/twl4030.c: revision 1.3
sys/arch/arm/ti/ti_com.c: revision 1.6
sys/arch/arm/ti/ti_com.c: revision 1.7
sys/arch/arm/ti/ti_com.c: revision 1.8
sys/dev/fdt/cpufreq_dt.c: revision 1.11
sys/arch/arm/ti/ti_iic.c: revision 1.1
sys/dev/fdt/cpufreq_dt.c: revision 1.12
sys/arch/arm/ti/ti_usb.c: revision 1.1
sys/arch/arm/ti/ti_iic.c: revision 1.2
sys/dev/fdt/cpufreq_dt.c: revision 1.13
sys/arch/arm/ti/ti_iic.c: revision 1.3
sys/arch/arm/ti/ti_iic.c: revision 1.4
sys/arch/evbarm/conf/files.ti: file removal
sys/arch/evbarm/conf/BEAGLEBOARDXM: file removal
sys/arch/arm/dts/omap3-n900.dts: revision 1.1
sys/arch/arm/ti/ti_edma.h: revision 1.1
sys/arch/evbarm/conf/OVERO_INSTALL: file removal
sys/arch/arm/ti/ti_usbtll.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.5
etc/etc.evbarm/Makefile.inc: revision 1.108
sys/arch/arm/ti/files.ti: revision 1.6
sys/dev/i2c/tps65217pmic.c: revision 1.13
etc/etc.evbarm/Makefile.inc: revision 1.109
sys/arch/arm/ti/files.ti: revision 1.7
sys/dev/i2c/tps65217pmic.c: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.8
sys/arch/arm/ti/files.ti: revision 1.9
sys/dev/fdt/usbnopphy.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.55
sys/arch/evbarm/conf/GENERIC: revision 1.56
sys/arch/evbarm/conf/GENERIC: revision 1.57
sys/arch/evbarm/conf/GENERIC: revision 1.58
sys/arch/evbarm/conf/GENERIC: revision 1.59
sys/arch/evbarm/conf/BEAGLEBONE: file removal
sys/arch/arm/ti/omap2_gpmcreg.h: revision 1.1
sys/arch/arm/ti/ti_otgreg.h: revision 1.1
sys/arch/arm/ti/ti_tptc.c: revision 1.1
sys/arch/evbarm/conf/IGEPV2: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.10
sys/dev/i2c/tda19988.c: revision 1.1
sys/arch/evbarm/conf/OVERO: file removal
sys/dev/i2c/tda19988.c: revision 1.2
sys/dev/i2c/tda19988.c: revision 1.3
sys/arch/arm/ti/omap3_dss.c: revision 1.1
sys/arch/evbarm/conf/BEAGLEBONE_INSTALL: file removal
sys/arch/arm/ti/ti_omapintc.c: revision 1.2
etc/etc.evbarm/Makefile.inc: revision 1.112
etc/etc.evbarm/Makefile.inc: revision 1.113
sys/arch/arm/ti/ti_div_clock.c: revision 1.1
etc/etc.evbarm/Makefile.inc: revision 1.114
sys/arch/evbarm/conf/N900: revision 1.32
sys/arch/evbarm/conf/N900: revision 1.33
distrib/utils/embedded/conf/armv7.conf: revision 1.36
sys/arch/evbarm/conf/GENERIC: revision 1.60
distrib/utils/embedded/conf/armv7.conf: revision 1.37
sys/arch/arm/ti/omap2_nand.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.61
sys/arch/arm/ti/omap2_nand.c: revision 1.2
sys/arch/evbarm/conf/GENERIC: revision 1.62
distrib/utils/embedded/conf/armv7.conf: revision 1.39
sys/arch/evbarm/conf/GENERIC: revision 1.63
sys/arch/arm/ti/ti_fb.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.64
sys/arch/evbarm/conf/GENERIC: revision 1.65
sys/arch/evbarm/conf/GENERIC: revision 1.66
sys/arch/evbarm/conf/GENERIC: revision 1.67
sys/arch/arm/ti/ti_platform.c: revision 1.7
sys/arch/arm/ti/ti_platform.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.2
sys/arch/arm/ti/ti_platform.c: revision 1.9
sys/arch/arm/ti/am3_prcm.c: revision 1.3
sys/arch/arm/ti/am3_prcm.c: revision 1.4
sys/arch/arm/ti/am3_prcm.c: revision 1.5
sys/arch/arm/ti/am3_prcm.c: revision 1.6
sys/arch/arm/ti/am3_prcm.c: revision 1.7
sys/arch/evbarm/conf/DEVKIT8000: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.9
sys/dev/fdt/syscon.c: revision 1.4
sys/arch/arm/ti/files.ti: revision 1.10
sys/arch/arm/ti/ti_mux_clock.c: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.11
sys/arch/arm/ti/if_cpswreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.12
sys/arch/arm/ti/ti_sdhc.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.13
sys/arch/arm/ti/files.ti: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.15
sys/arch/arm/ti/files.ti: revision 1.16
sys/arch/arm/ti/omap3_cm.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.17
sys/arch/arm/ti/omap3_cm.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.18
sys/arch/arm/ti/omap3_cm.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.19
sys/arch/arm/ti/omap3_cm.c: revision 1.4
sys/arch/arm/ti/ti_motg.c: revision 1.1
sys/arch/arm/ti/ti_rngreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.1
sys/arch/arm/dts/omap3-beagle-xm.dts: revision 1.1
sys/arch/arm/ti/am3_platform.c: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARDXM_INSTALL: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.22
sys/arch/evbarm/conf/README.evbarm: revision 1.23
sys/arch/arm/ti/ti_platform.c: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.24
sys/arch/arm/ti/ti_omaptimer.c: revision 1.2
sys/arch/arm/ti/ti_prcm.c: revision 1.2
sys/arch/evbarm/conf/README.evbarm: revision 1.25
sys/arch/arm/ti/ti_omaptimer.c: revision 1.3
sys/arch/arm/ti/ti_prcm.c: revision 1.3
sys/arch/evbarm/conf/README.evbarm: revision 1.26
sys/arch/arm/ti/ti_omaptimer.c: revision 1.4
sys/arch/evbarm/conf/README.evbarm: revision 1.27
sys/arch/arm/ti/ti_ehci.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.20
sys/arch/arm/ti/ti_cpufreq.c: revision 1.1
sys/arch/arm/ti/ti_cpufreq.c: revision 1.2
sys/arch/arm/fdt/smsh_fdt.c: revision 1.2
sys/arch/arm/ti/omap3_dssreg.h: revision 1.1
sys/arch/evbarm/conf/OVERO: revision 1.56
sys/arch/evbarm/conf/TI: file removal
sys/arch/arm/dts/omap3-beagle.dts: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.55
sys/dev/fdt/fdtvar.h: revision 1.56
distrib/utils/embedded/files/armv7_boot_nonefi.cmd: revision 1.2
sys/dev/fdt/fdt_phy.c: revision 1.6
sys/arch/arm/ti/ti_iicreg.h: revision 1.1
sys/arch/arm/ti/ti_lcdc.c: revision 1.1
sys/arch/arm/ti/ti_gpio.c: revision 1.1
sys/arch/arm/ti/ti_iicreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.c: revision 1.2
sys/dev/fdt/files.fdt: revision 1.46
sys/arch/arm/ti/ti_gpio.c: revision 1.2
sys/arch/arm/ti/ti_iicreg.h: revision 1.3
sys/arch/arm/ti/ti_lcdc.c: revision 1.3
sys/dev/fdt/files.fdt: revision 1.47
sys/arch/arm/ti/ti_gpio.c: revision 1.3
sys/dev/fdt/pinctrl_single.c: revision 1.1
sys/arch/evbarm/conf/files.generic: revision 1.9
sys/arch/arm/ti/ti_gpmc.c: revision 1.1
sys/arch/arm/ti/ti_lcdcreg.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARD: file removal
sys/arch/arm/ti/omap3_prm.c: revision 1.1
sys/arch/arm/ti/ti_platform.h: file removal
sys/arch/arm/ti/omap3_platform.c: revision 1.1
sys/arch/arm/ti/ti_prcm.h: revision 1.2
sys/arch/arm/ti/omap3_platform.c: revision 1.2
sys/arch/arm/ti/ti_prcm.h: revision 1.3
sys/arch/arm/ti/ti_prcm.h: revision 1.4
sys/dev/fdt/fdt_clock.c: revision 1.9
sys/arch/arm/ti/ti_edma.c: revision 1.1
sys/arch/arm/ti/ti_otg.c: revision 1.1
distrib/utils/embedded/files/armv7_boot.cmd: revision 1.15
sys/arch/arm/ti/if_cpsw.c: revision 1.7
sys/arch/evbarm/conf/std.igepv2: file removal
sys/arch/arm/ti/if_cpsw.c: revision 1.8
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.1
Adapt ti fdt glue to support GENERIC kernel.
Do not search 64-bit directories for dts files
Fix am33xx_platform_early_putchar for pre-MMU output
Add bus driver for TI sysc interconncet.
Make com work again
Add EDMA TPCC and TPTC drivers.
Add driver for one-register-per-pin type pinctrl devices.
Add MMCHS support.
Add USB support.
Disable autoidle
Place devmap above KERNEL_IO_VBASE
Use Timer2 for timecounter, and enable hw module.
Add support for TI AM335x
Add atmel,24c256 compat data
Add I2C support.
Add tiiic, tps65217pmic
Add FDT support
Fix early putchar, add reset func
No support for tegra210 in armv7 kernel
Switch to GENERIC kernels only.
Get mac address from DT
Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.
enumerate devices under child "clocks" node
Add support for platform specific opp table filters.
Add fdtbus_clock_count to count the number of clock references on a given node
enumerate devices under child "clocks" node
Add AM335x DVFS support.
Enable TI AM335x DVFS support
Add support for GPIO controller.
Add tigpio
Unhook BEAGLEBONE kernel from the build
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).
Add support for hardware RNG.
Add tirng
Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty
Rename SOC_TI_AM335X to SOC_AM33XX and rename ti_platform.c to
am3_platform.c
Set stdout-path on TI OMAP3 BeagleBoard
Add support for TI OMAP3.
Add OMAP3 support.
Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.
Skip xref if it is 0
Add generic USB PHY driver
Add driver for TI TWL4030 Power Management IC
Use the hwmod clk to get the timer rate and explicitly enable the
timecounter timer.
Add OMAP3 USB support.
Add twl, usbnopphy, tiusb, tiusbtll
Move omap3 dtb files to /boot/dtb
Remove BEAGLEBOARD kernel from list of kernels to build
Remove BEAGLEBOARD kernel (supported by GENERIC now)
Fix PRM_RSTCTRL_RST_DPLL3 definition, now reset works.
Remove DEVKIT8000 kernel (GENERIC should work now)
Remove DPLL5 init ported from old omap code, it is not required
Set the stdout-path on xM like Ti OMAP3 BeagleBoard
Remove BEAGLEBOARDXM from the build
Remove BEAGLEBOARDXM kernel (supported by GENERIC now)
Handle different register layout on OMAP3
Add omapfb to FDT-ized TI port.
Use dss as console on Nokia N900.
Enable IRQ status bits for omap3 type and set speed properly
Add RTC support
Remove tps65950pm (hardware now supported by twl4030.c)
Add NAND flash support.
Add tigpmc, omapnand
Attach tiusb before the default pass since it adds a bus to reduce kernel output
Replace tps65950pm with twl (the former has been removed)
Fix non-FDT build
Cleanup and remove dependency on arch/arm/omap
Add support for GPIO interrupts and fix reading the state of output pins.
Match smsc,lan9115 and honour local-mac-address/mac-address properties
Only one instance of twl(4) is needed
Remove OVERO from build, and commented out N900 kernel config
OMAP3 SoC and all peripherals in the OVERO kernel are now supported by
GENERIC.
Remove commented out IGEPV2 entry
OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.
No longer used.
Also match ti,omap2-onenand
Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context
Add driver for NXP TDA19988 HDMI encoder
Add support for AM335x display controller (LCDC).
Add tdahdmi, tilcdc, tifb
Test DRM_MODE_* flags, not VID_*
Comment out mode fixup (not needed it seems)
Use 297MHz for display clock
Select closest rate to desired pixel clock
Speed up mode setting a bit and turn off the display while changing modes
|
| 1.2 | 27-Oct-2019 |
jmcneill | branches: 1.2.4;
No support for tegra210 in armv7 kernel
|
| 1.1 | 21-Jul-2019 |
rin | branches: 1.1.2;
Fallback to non-EFI boot script if EFI bootloader is absent.
Note that we do not currently build EFI bootloader for earmv7hf-eb,
as it requires little-endian version of toolchain.
|
| 1.1.2.1 | 27-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #491):
sys/arch/evbarm/conf/BEAGLEBOARD_INSTALL: file removal
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.2
sys/arch/arm/ti/ti_sysc.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.2
sys/dev/i2c/tps65950.c: file removal
sys/arch/evbarm/conf/std.ti: file removal
sys/dev/i2c/files.i2c: revision 1.101
sys/dev/i2c/files.i2c: revision 1.102
sys/dev/i2c/at24cxx.c: revision 1.32
sys/dev/i2c/files.i2c: revision 1.103
sys/dev/i2c/twl4030.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.104
sys/dev/i2c/twl4030.c: revision 1.2
sys/dev/i2c/twl4030.c: revision 1.3
sys/arch/arm/ti/ti_com.c: revision 1.6
sys/arch/arm/ti/ti_com.c: revision 1.7
sys/arch/arm/ti/ti_com.c: revision 1.8
sys/dev/fdt/cpufreq_dt.c: revision 1.11
sys/arch/arm/ti/ti_iic.c: revision 1.1
sys/dev/fdt/cpufreq_dt.c: revision 1.12
sys/arch/arm/ti/ti_usb.c: revision 1.1
sys/arch/arm/ti/ti_iic.c: revision 1.2
sys/dev/fdt/cpufreq_dt.c: revision 1.13
sys/arch/arm/ti/ti_iic.c: revision 1.3
sys/arch/arm/ti/ti_iic.c: revision 1.4
sys/arch/evbarm/conf/files.ti: file removal
sys/arch/evbarm/conf/BEAGLEBOARDXM: file removal
sys/arch/arm/dts/omap3-n900.dts: revision 1.1
sys/arch/arm/ti/ti_edma.h: revision 1.1
sys/arch/evbarm/conf/OVERO_INSTALL: file removal
sys/arch/arm/ti/ti_usbtll.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.5
etc/etc.evbarm/Makefile.inc: revision 1.108
sys/arch/arm/ti/files.ti: revision 1.6
sys/dev/i2c/tps65217pmic.c: revision 1.13
etc/etc.evbarm/Makefile.inc: revision 1.109
sys/arch/arm/ti/files.ti: revision 1.7
sys/dev/i2c/tps65217pmic.c: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.8
sys/arch/arm/ti/files.ti: revision 1.9
sys/dev/fdt/usbnopphy.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.55
sys/arch/evbarm/conf/GENERIC: revision 1.56
sys/arch/evbarm/conf/GENERIC: revision 1.57
sys/arch/evbarm/conf/GENERIC: revision 1.58
sys/arch/evbarm/conf/GENERIC: revision 1.59
sys/arch/evbarm/conf/BEAGLEBONE: file removal
sys/arch/arm/ti/omap2_gpmcreg.h: revision 1.1
sys/arch/arm/ti/ti_otgreg.h: revision 1.1
sys/arch/arm/ti/ti_tptc.c: revision 1.1
sys/arch/evbarm/conf/IGEPV2: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.10
sys/dev/i2c/tda19988.c: revision 1.1
sys/arch/evbarm/conf/OVERO: file removal
sys/dev/i2c/tda19988.c: revision 1.2
sys/dev/i2c/tda19988.c: revision 1.3
sys/arch/arm/ti/omap3_dss.c: revision 1.1
sys/arch/evbarm/conf/BEAGLEBONE_INSTALL: file removal
sys/arch/arm/ti/ti_omapintc.c: revision 1.2
etc/etc.evbarm/Makefile.inc: revision 1.112
etc/etc.evbarm/Makefile.inc: revision 1.113
sys/arch/arm/ti/ti_div_clock.c: revision 1.1
etc/etc.evbarm/Makefile.inc: revision 1.114
sys/arch/evbarm/conf/N900: revision 1.32
sys/arch/evbarm/conf/N900: revision 1.33
distrib/utils/embedded/conf/armv7.conf: revision 1.36
sys/arch/evbarm/conf/GENERIC: revision 1.60
distrib/utils/embedded/conf/armv7.conf: revision 1.37
sys/arch/arm/ti/omap2_nand.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.61
sys/arch/arm/ti/omap2_nand.c: revision 1.2
sys/arch/evbarm/conf/GENERIC: revision 1.62
distrib/utils/embedded/conf/armv7.conf: revision 1.39
sys/arch/evbarm/conf/GENERIC: revision 1.63
sys/arch/arm/ti/ti_fb.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.64
sys/arch/evbarm/conf/GENERIC: revision 1.65
sys/arch/evbarm/conf/GENERIC: revision 1.66
sys/arch/evbarm/conf/GENERIC: revision 1.67
sys/arch/arm/ti/ti_platform.c: revision 1.7
sys/arch/arm/ti/ti_platform.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.2
sys/arch/arm/ti/ti_platform.c: revision 1.9
sys/arch/arm/ti/am3_prcm.c: revision 1.3
sys/arch/arm/ti/am3_prcm.c: revision 1.4
sys/arch/arm/ti/am3_prcm.c: revision 1.5
sys/arch/arm/ti/am3_prcm.c: revision 1.6
sys/arch/arm/ti/am3_prcm.c: revision 1.7
sys/arch/evbarm/conf/DEVKIT8000: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.9
sys/dev/fdt/syscon.c: revision 1.4
sys/arch/arm/ti/files.ti: revision 1.10
sys/arch/arm/ti/ti_mux_clock.c: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.11
sys/arch/arm/ti/if_cpswreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.12
sys/arch/arm/ti/ti_sdhc.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.13
sys/arch/arm/ti/files.ti: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.15
sys/arch/arm/ti/files.ti: revision 1.16
sys/arch/arm/ti/omap3_cm.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.17
sys/arch/arm/ti/omap3_cm.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.18
sys/arch/arm/ti/omap3_cm.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.19
sys/arch/arm/ti/omap3_cm.c: revision 1.4
sys/arch/arm/ti/ti_motg.c: revision 1.1
sys/arch/arm/ti/ti_rngreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.1
sys/arch/arm/dts/omap3-beagle-xm.dts: revision 1.1
sys/arch/arm/ti/am3_platform.c: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARDXM_INSTALL: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.22
sys/arch/evbarm/conf/README.evbarm: revision 1.23
sys/arch/arm/ti/ti_platform.c: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.24
sys/arch/arm/ti/ti_omaptimer.c: revision 1.2
sys/arch/arm/ti/ti_prcm.c: revision 1.2
sys/arch/evbarm/conf/README.evbarm: revision 1.25
sys/arch/arm/ti/ti_omaptimer.c: revision 1.3
sys/arch/arm/ti/ti_prcm.c: revision 1.3
sys/arch/evbarm/conf/README.evbarm: revision 1.26
sys/arch/arm/ti/ti_omaptimer.c: revision 1.4
sys/arch/evbarm/conf/README.evbarm: revision 1.27
sys/arch/arm/ti/ti_ehci.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.20
sys/arch/arm/ti/ti_cpufreq.c: revision 1.1
sys/arch/arm/ti/ti_cpufreq.c: revision 1.2
sys/arch/arm/fdt/smsh_fdt.c: revision 1.2
sys/arch/arm/ti/omap3_dssreg.h: revision 1.1
sys/arch/evbarm/conf/OVERO: revision 1.56
sys/arch/evbarm/conf/TI: file removal
sys/arch/arm/dts/omap3-beagle.dts: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.55
sys/dev/fdt/fdtvar.h: revision 1.56
distrib/utils/embedded/files/armv7_boot_nonefi.cmd: revision 1.2
sys/dev/fdt/fdt_phy.c: revision 1.6
sys/arch/arm/ti/ti_iicreg.h: revision 1.1
sys/arch/arm/ti/ti_lcdc.c: revision 1.1
sys/arch/arm/ti/ti_gpio.c: revision 1.1
sys/arch/arm/ti/ti_iicreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.c: revision 1.2
sys/dev/fdt/files.fdt: revision 1.46
sys/arch/arm/ti/ti_gpio.c: revision 1.2
sys/arch/arm/ti/ti_iicreg.h: revision 1.3
sys/arch/arm/ti/ti_lcdc.c: revision 1.3
sys/dev/fdt/files.fdt: revision 1.47
sys/arch/arm/ti/ti_gpio.c: revision 1.3
sys/dev/fdt/pinctrl_single.c: revision 1.1
sys/arch/evbarm/conf/files.generic: revision 1.9
sys/arch/arm/ti/ti_gpmc.c: revision 1.1
sys/arch/arm/ti/ti_lcdcreg.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARD: file removal
sys/arch/arm/ti/omap3_prm.c: revision 1.1
sys/arch/arm/ti/ti_platform.h: file removal
sys/arch/arm/ti/omap3_platform.c: revision 1.1
sys/arch/arm/ti/ti_prcm.h: revision 1.2
sys/arch/arm/ti/omap3_platform.c: revision 1.2
sys/arch/arm/ti/ti_prcm.h: revision 1.3
sys/arch/arm/ti/ti_prcm.h: revision 1.4
sys/dev/fdt/fdt_clock.c: revision 1.9
sys/arch/arm/ti/ti_edma.c: revision 1.1
sys/arch/arm/ti/ti_otg.c: revision 1.1
distrib/utils/embedded/files/armv7_boot.cmd: revision 1.15
sys/arch/arm/ti/if_cpsw.c: revision 1.7
sys/arch/evbarm/conf/std.igepv2: file removal
sys/arch/arm/ti/if_cpsw.c: revision 1.8
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.1
Adapt ti fdt glue to support GENERIC kernel.
Do not search 64-bit directories for dts files
Fix am33xx_platform_early_putchar for pre-MMU output
Add bus driver for TI sysc interconncet.
Make com work again
Add EDMA TPCC and TPTC drivers.
Add driver for one-register-per-pin type pinctrl devices.
Add MMCHS support.
Add USB support.
Disable autoidle
Place devmap above KERNEL_IO_VBASE
Use Timer2 for timecounter, and enable hw module.
Add support for TI AM335x
Add atmel,24c256 compat data
Add I2C support.
Add tiiic, tps65217pmic
Add FDT support
Fix early putchar, add reset func
No support for tegra210 in armv7 kernel
Switch to GENERIC kernels only.
Get mac address from DT
Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.
enumerate devices under child "clocks" node
Add support for platform specific opp table filters.
Add fdtbus_clock_count to count the number of clock references on a given node
enumerate devices under child "clocks" node
Add AM335x DVFS support.
Enable TI AM335x DVFS support
Add support for GPIO controller.
Add tigpio
Unhook BEAGLEBONE kernel from the build
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).
Add support for hardware RNG.
Add tirng
Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty
Rename SOC_TI_AM335X to SOC_AM33XX and rename ti_platform.c to
am3_platform.c
Set stdout-path on TI OMAP3 BeagleBoard
Add support for TI OMAP3.
Add OMAP3 support.
Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.
Skip xref if it is 0
Add generic USB PHY driver
Add driver for TI TWL4030 Power Management IC
Use the hwmod clk to get the timer rate and explicitly enable the
timecounter timer.
Add OMAP3 USB support.
Add twl, usbnopphy, tiusb, tiusbtll
Move omap3 dtb files to /boot/dtb
Remove BEAGLEBOARD kernel from list of kernels to build
Remove BEAGLEBOARD kernel (supported by GENERIC now)
Fix PRM_RSTCTRL_RST_DPLL3 definition, now reset works.
Remove DEVKIT8000 kernel (GENERIC should work now)
Remove DPLL5 init ported from old omap code, it is not required
Set the stdout-path on xM like Ti OMAP3 BeagleBoard
Remove BEAGLEBOARDXM from the build
Remove BEAGLEBOARDXM kernel (supported by GENERIC now)
Handle different register layout on OMAP3
Add omapfb to FDT-ized TI port.
Use dss as console on Nokia N900.
Enable IRQ status bits for omap3 type and set speed properly
Add RTC support
Remove tps65950pm (hardware now supported by twl4030.c)
Add NAND flash support.
Add tigpmc, omapnand
Attach tiusb before the default pass since it adds a bus to reduce kernel output
Replace tps65950pm with twl (the former has been removed)
Fix non-FDT build
Cleanup and remove dependency on arch/arm/omap
Add support for GPIO interrupts and fix reading the state of output pins.
Match smsc,lan9115 and honour local-mac-address/mac-address properties
Only one instance of twl(4) is needed
Remove OVERO from build, and commented out N900 kernel config
OMAP3 SoC and all peripherals in the OVERO kernel are now supported by
GENERIC.
Remove commented out IGEPV2 entry
OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.
No longer used.
Also match ti,omap2-onenand
Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context
Add driver for NXP TDA19988 HDMI encoder
Add support for AM335x display controller (LCDC).
Add tdahdmi, tilcdc, tifb
Test DRM_MODE_* flags, not VID_*
Comment out mode fixup (not needed it seems)
Use 297MHz for display clock
Select closest rate to desired pixel clock
Speed up mode setting a bit and turn off the display while changing modes
|
| 1.2.4.2 | 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.2.4.1 | 27-Oct-2019 |
martin | file armv7_boot_nonefi.cmd was added on branch phil-wifi on 2020-04-13 07:45:36 +0000
|
| 1.1 | 19-Apr-2023 |
brook | Install /boot/boot.cfg with EFI bootloaders.
On ARM ports, the EFI boot loader handles a boot.cfg file if it
exists, but one is not installed by default. In contrast, both the
i386 and amd64 ports do install boot.cfg by default. Bring these
ports into agreement by installing boot.cfg on ARM ports with EFI boot
loaders.
|
| 1.6 | 29-Jan-2024 |
mrg | properly quote arguments.
|
| 1.5 | 11-Dec-2021 |
mrg | branches: 1.5.2;
remove clause 3 from all my licenses that aren't conflicting with
another copyright claim line. again. (i did this in 2008 and then
did not update all of my personal templates.)
|
| 1.4 | 05-Oct-2019 |
mlelstv | branches: 1.4.4;
Fix typo
|
| 1.3 | 12-Jun-2019 |
mrg | various cleanups inspired by reviews:
- clean up variable usage
- be explicit that $ssh_userkeys is global
- don't assig id output to a variable not used
|
| 1.2 | 12-Jun-2019 |
mrg | explicitly strip carriage return so that non-unix text files work.
|
| 1.1 | 11-Jun-2019 |
mrg | add a method to add user accounts or ssh keys to the embedded
(installable) images which may be run entirely headless and
have no current method to edit the installation without another
netbsd host to modify the root (FFS) partition.
creds_msdos reads the creds.txt file from the msdos boot
partition and provides 4 basic methods:
sshkeyfile <user> <path on msdos>
sshkey <user> <entry>
useraddhash <user> <passwd hash>
useradd <user> <passwd>
the first two create a user with ssh key(s), and the second
two create a user with a password. if the last method is used
and raw passwords are given, the creds.txt file will be
shredded and deleted by rm -P.
inspired by a request from a pine64 user. ok jmcneill@.
|
| 1.4.4.2 | 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.4.4.1 | 05-Oct-2019 |
martin | file creds_msdos was added on branch phil-wifi on 2020-04-13 07:45:36 +0000
|
| 1.5.2.1 | 04-Feb-2024 |
martin | Pull up following revision(s) (requested by mrg in ticket #580):
distrib/utils/embedded/files/creds_msdos: revision 1.6
properly quote arguments.
|
| 1.3 | 12-Jun-2019 |
mrg | move creds_msdos.8 into the normal place and install it.
|
| 1.2 | 11-Jun-2019 |
wiz | Use more markup, fix some typos.
|
| 1.1 | 11-Jun-2019 |
mrg | add a method to add user accounts or ssh keys to the embedded
(installable) images which may be run entirely headless and
have no current method to edit the installation without another
netbsd host to modify the root (FFS) partition.
creds_msdos reads the creds.txt file from the msdos boot
partition and provides 4 basic methods:
sshkeyfile <user> <path on msdos>
sshkey <user> <entry>
useraddhash <user> <passwd hash>
useradd <user> <passwd>
the first two create a user with ssh key(s), and the second
two create a user with a password. if the last method is used
and raw passwords are given, the creds.txt file will be
shredded and deleted by rm -P.
inspired by a request from a pine64 user. ok jmcneill@.
|
| 1.6 | 27-Sep-2023 |
riastradh | ec2_init: Suppress error message for nonexistent sysctl.
We're querying to see whether the sysctl node is available and if so
what its text is, not interested in the error message.
XXX pullup-10
|
| 1.5 | 15-Oct-2022 |
jmcneill | branches: 1.5.2;
ec2_init: Add support for Oracle Cloud
|
| 1.4 | 20-Jul-2021 |
rhialto | Extract just the random bits to feed to /dev/urandom.
This makes no difference in the randomness of the pool, but it improves
on the estimation (if any) of how many random bits were obtained.
Also make the ftp -q time out a bit longer since I got some time outs.
|
| 1.3 | 15-Jul-2021 |
rhialto | Add some OpenStack support.
I found that in the cloud I tried, by the time this script runs, there
is no default route in effect yet. That takes some 5 to 10 seconds
longer. So I added a retry loop, and to make that easier, changed the
order of queries. To make sure it doesn't wait ~forever for a
non-existent service I added the -q 1 option to ftp invocations.
I also added OpenStack-specific metadata which contains a different
random_seed of 512 bytes every time it is requested. See
https://github.com/openstack/nova/blob/master/nova/api/metadata/base.py#L355
It may not be trusted data but only in the strictest sense of the word.
The data can only be observed by people with access to the cloud's
overlay network for the particular VM.
|
| 1.2 | 01-Jul-2021 |
jmcneill | AWS marketplace does not allow root ssh logins. Create an ec2-user account
and install the ssh key in that user's home directory instead.
|
| 1.1 | 30-Nov-2018 |
jmcneill | branches: 1.1.2; 1.1.4;
Add support for configuring Amazon.com EC2 SSH keys and hostnames. While
here, only set wscons=YES if a wsdisplay0 device is present.
|
| 1.1.4.2 | 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.1.4.1 | 30-Nov-2018 |
christos | file ec2_init was added on branch phil-wifi on 2019-06-10 21:42:37 +0000
|
| 1.1.2.2 | 26-Dec-2018 |
pgoyette | Sync with HEAD, resolve a few conflicts
|
| 1.1.2.1 | 30-Nov-2018 |
pgoyette | file ec2_init was added on branch pgoyette-compat on 2018-12-26 14:01:13 +0000
|
| 1.5.2.1 | 02-Oct-2023 |
martin | Pull up following revision(s) (requested by riastradh in ticket #382):
distrib/utils/embedded/files/ec2_init: revision 1.6
ec2_init: Suppress error message for nonexistent sysctl.
We're querying to see whether the sysctl node is available and if so
what its text is, not interested in the error message.
|
| 1.1 | 21-Jan-2024 |
jmcneill | branches: 1.1.2;
wii: Add 128x48 icon to SD card image
|
| 1.1.2.2 | 03-Feb-2024 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #561):
etc/etc.evbppc/Makefile.inc: revision 1.15
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.1
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.2
sys/arch/evbppc/wii/dev/bwdsp.c: revision 1.1
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.3
sys/arch/evbppc/wii/dev/bwdsp.c: revision 1.2
distrib/utils/embedded/files/evbppc_wii_icon.png: revision 1.1
usr.sbin/sysinst/arch/evbppc/md.h: revision 1.4
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.4
sys/arch/evbppc/wii/dev/viio.h: revision 1.1
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.5
sys/arch/evbppc/wii/dev/mainbus.h: revision 1.1
distrib/utils/embedded/conf/wii.conf: revision 1.1
distrib/utils/embedded/conf/wii.conf: revision 1.2
distrib/utils/embedded/conf/wii.conf: revision 1.3
sys/dev/sdmmc/sdhcvar.h: revision 1.34
sys/dev/sdmmc/sdhc.c: revision 1.118
sys/arch/evbppc/wii/dev/resetbtn.c: revision 1.1
distrib/utils/embedded/conf/evbppc.conf: revision 1.1
sys/dev/wsfb/genfb.c: revision 1.91
sys/arch/evbppc/wii/dev/resetbtn.c: revision 1.2
sys/dev/wscons/wsconsio.h: revision 1.127
sys/arch/powerpc/oea/oea_machdep.c: revision 1.85
sys/arch/evbppc/wii/dev/hollywood.h: revision 1.1
sys/arch/evbppc/conf/std.wii: revision 1.1
sys/arch/evbppc/wii/dev/hollywood.h: revision 1.2
sys/arch/evbppc/wii/dev/hollywood.c: revision 1.1
sys/arch/evbppc/conf/std.wii: revision 1.2
sys/arch/evbppc/wii/dev/hollywood.c: revision 1.2
sys/arch/evbppc/conf/std.wii: revision 1.3
sys/arch/powerpc/oea/cpu_subr.c: revision 1.109
sys/arch/evbppc/wii/wii_mmuinit.S: revision 1.1
sys/dev/usb/usb.h: revision 1.124
sys/arch/evbppc/wii/machdep.c: revision 1.1
sys/arch/evbppc/wii/dev/rtcsram.c: revision 1.1
sys/arch/powerpc/include/oea/hid.h: revision 1.14
sys/arch/evbppc/wii/mainbus.c: revision 1.1
sys/arch/evbppc/wii/machdep.c: revision 1.2
sys/arch/evbppc/wii/dev/ehci_hollywood.c: revision 1.1
sys/arch/evbppc/wii/mainbus.c: revision 1.2
sys/arch/evbppc/wii/machdep.c: revision 1.3
sys/arch/evbppc/wii/dev/ehci_hollywood.c: revision 1.2
sys/arch/evbppc/wii/mainbus.c: revision 1.3
sys/arch/evbppc/wii/machdep.c: revision 1.4
sys/arch/evbppc/wii/dev/hwgpio.c: revision 1.1
sys/arch/evbppc/wii/dev/sdhc_hollywood.c: revision 1.1
sys/arch/evbppc/wii/dev/sdhc_hollywood.c: revision 1.2
sys/arch/evbppc/wii/wii_locore.S: revision 1.1
sys/arch/evbppc/conf/files.wii: revision 1.1
sys/arch/evbppc/wii/wii_locore.S: revision 1.2
sys/arch/evbppc/include/wii.h: revision 1.1
sys/arch/evbppc/conf/files.wii: revision 1.2
sys/arch/evbppc/wii/dev/exi.c: revision 1.1
sys/arch/evbppc/include/wii.h: revision 1.2
sys/arch/evbppc/conf/files.wii: revision 1.3
sys/arch/powerpc/powerpc/clock.c: revision 1.18
sys/arch/evbppc/include/wii.h: revision 1.3
sys/arch/evbppc/conf/files.wii: revision 1.4
sys/arch/evbppc/include/wii.h: revision 1.4
sys/arch/evbppc/wii/dev/exi.h: revision 1.1
sys/arch/evbppc/wii/dev/avenc.c: revision 1.1
sys/arch/evbppc/include/wii.h: revision 1.5
sys/arch/evbppc/include/wii.h: revision 1.6
sys/arch/evbppc/include/wii.h: revision 1.7
sys/arch/evbppc/wii/dev/avenc.h: revision 1.1
distrib/utils/embedded/mkimage: revision 1.79
sys/arch/evbppc/conf/WII: revision 1.1
sys/arch/evbppc/conf/INSTALL_WII: revision 1.1
distrib/utils/embedded/files/evbppc_wii_meta.xml: revision 1.1
sys/arch/evbppc/wii/dev/vireg.h: revision 1.1
sys/arch/evbppc/conf/WII: revision 1.2
distrib/utils/embedded/files/evbppc_wii_meta.xml: revision 1.2
sys/arch/evbppc/wii/dev/vireg.h: revision 1.2
sys/arch/evbppc/conf/WII: revision 1.3
sys/arch/evbppc/conf/WII: revision 1.4
usr.sbin/sysinst/arch/evbppc/md.c: revision 1.11
sys/arch/evbppc/wii/dev/ohci_hollywood.c: revision 1.1
sys/dev/usb/ehcivar.h: revision 1.52
sys/arch/evbppc/wii/pic_pi.c: revision 1.1
sys/arch/evbppc/wii/dev/ohci_hollywood.c: revision 1.2
etc/etc.evbppc/ttys: revision 1.8
sys/arch/evbppc/wii/dev/bwai.c: revision 1.1
sys/arch/evbppc/wii/dev/bwai.c: revision 1.2
sys/arch/evbppc/wii/dev/bwai.c: revision 1.3
sys/arch/evbppc/wii/autoconf.c: revision 1.1
sys/arch/evbppc/conf/Makefile.wii.inc: revision 1.1
sys/arch/evbppc/wii/dev/bwai.h: revision 1.1
sys/arch/evbppc/wii/autoconf.c: revision 1.2
sys/arch/evbppc/conf/Makefile.wii.inc: revision 1.2
powerpc: oea: Fix prefetchable mappings
Prefetchable mappings need PMAP_NOCACHE to get write-combine semantics.
powerpc: oea: Decode IBM750CL L2 cache information.
sdmmc: add support for optional delay after register write
wscons: Add HOLLYWOOD display and YUY2 pixel format types
wsfb: add support for optional "devcmap" property
A hardware driver can supply a pointer to a 16x 32-bit array to override
the default rasops device colour map in the "devcmap" property.
ehci: add EHCIF_32BIT_ACCESS flag to force 32-bit MMIO
fix comments: HID0 ICFI/DCFI are "flash invalidate", not "flush invalidate"
powerpc: fix delay for large (> ~5sec) values
When calculating the target timebase, promote '1000' on the RHS to ULL
to force 64-bit calculation, otherwise 'n * 1000' will overflow.
usb: increase USB_PORT_RESET_RECOVERY from 10ms to 20ms
I changed this from 250ms to 10ms back in 2021 based on a similar FreeBSD
change, but it seems to be a bit too aggressive for some platforms.
evbppc: Add initial support for the Nintendo Wii
wii: support RB_POWERDOWN
build fix: use dd with count=1 for compat with NetBSD dd(1)
wii: Add NTSC 480p support.
In addition to this, add VIIO_{GET,SET}REGS ioctl support to allow for
poking at video interface registers from userland. This is helpful for
debugging display issues.
wii: Add 128x48 icon to SD card image
wii: Fix a comment
wii: Add drivers for Broadway DSP and Audio interface.
0: [*] audio0 @ bwdsp0: Broadway DSP
playback: 16, 2ch, 48000Hz
record: unavailable
(P-) slinear_be 16/16, 2ch, { 48000 }
wii: Add screenblank support.
wii: Use screen dimming register for screen blanking.
wii: Add GPIO, I2C, and basic A/V encoder driver.
wii: Use A/V encoder volume controls instead of using a software filter.
wii: Simply DSP driver - no interrupt handler required.
wii: provide device names to intr_establish
wii$ intrctl list
interrupt id CPU0 device name(s)
pi irq 14 64769* hollywood0
hollywood irq 36 5872* ehci0
hollywood irq 39 58907* sdhc0
hollywood irq 40 4* sdhc1
hollywood irq 49 0* resetbtn0
pi irq 5 0* bwai0
wii: Add support for passing boot options to the kernel.
wii: Add External interface bus and RTC support
wii: Remove objcopy after kernel build.
HBC will do the right thing.
Add wsvt25 entries (off by default) for ttyE0-ttyE3.
Add support for "PAL" (576i) mode on Wii.
|
| 1.1.2.1 | 21-Jan-2024 |
martin | file evbppc_wii_icon.png was added on branch netbsd-10 on 2024-02-03 11:47:05 +0000
|
| 1.2 | 24-Jan-2024 |
jmcneill | branches: 1.2.2;
wii: Add support for passing boot options to the kernel.
|
| 1.1 | 20-Jan-2024 |
jmcneill | evbppc: Add initial support for the Nintendo Wii
|
| 1.2.2.2 | 03-Feb-2024 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #561):
etc/etc.evbppc/Makefile.inc: revision 1.15
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.1
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.2
sys/arch/evbppc/wii/dev/bwdsp.c: revision 1.1
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.3
sys/arch/evbppc/wii/dev/bwdsp.c: revision 1.2
distrib/utils/embedded/files/evbppc_wii_icon.png: revision 1.1
usr.sbin/sysinst/arch/evbppc/md.h: revision 1.4
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.4
sys/arch/evbppc/wii/dev/viio.h: revision 1.1
sys/arch/evbppc/wii/dev/wiifb.c: revision 1.5
sys/arch/evbppc/wii/dev/mainbus.h: revision 1.1
distrib/utils/embedded/conf/wii.conf: revision 1.1
distrib/utils/embedded/conf/wii.conf: revision 1.2
distrib/utils/embedded/conf/wii.conf: revision 1.3
sys/dev/sdmmc/sdhcvar.h: revision 1.34
sys/dev/sdmmc/sdhc.c: revision 1.118
sys/arch/evbppc/wii/dev/resetbtn.c: revision 1.1
distrib/utils/embedded/conf/evbppc.conf: revision 1.1
sys/dev/wsfb/genfb.c: revision 1.91
sys/arch/evbppc/wii/dev/resetbtn.c: revision 1.2
sys/dev/wscons/wsconsio.h: revision 1.127
sys/arch/powerpc/oea/oea_machdep.c: revision 1.85
sys/arch/evbppc/wii/dev/hollywood.h: revision 1.1
sys/arch/evbppc/conf/std.wii: revision 1.1
sys/arch/evbppc/wii/dev/hollywood.h: revision 1.2
sys/arch/evbppc/wii/dev/hollywood.c: revision 1.1
sys/arch/evbppc/conf/std.wii: revision 1.2
sys/arch/evbppc/wii/dev/hollywood.c: revision 1.2
sys/arch/evbppc/conf/std.wii: revision 1.3
sys/arch/powerpc/oea/cpu_subr.c: revision 1.109
sys/arch/evbppc/wii/wii_mmuinit.S: revision 1.1
sys/dev/usb/usb.h: revision 1.124
sys/arch/evbppc/wii/machdep.c: revision 1.1
sys/arch/evbppc/wii/dev/rtcsram.c: revision 1.1
sys/arch/powerpc/include/oea/hid.h: revision 1.14
sys/arch/evbppc/wii/mainbus.c: revision 1.1
sys/arch/evbppc/wii/machdep.c: revision 1.2
sys/arch/evbppc/wii/dev/ehci_hollywood.c: revision 1.1
sys/arch/evbppc/wii/mainbus.c: revision 1.2
sys/arch/evbppc/wii/machdep.c: revision 1.3
sys/arch/evbppc/wii/dev/ehci_hollywood.c: revision 1.2
sys/arch/evbppc/wii/mainbus.c: revision 1.3
sys/arch/evbppc/wii/machdep.c: revision 1.4
sys/arch/evbppc/wii/dev/hwgpio.c: revision 1.1
sys/arch/evbppc/wii/dev/sdhc_hollywood.c: revision 1.1
sys/arch/evbppc/wii/dev/sdhc_hollywood.c: revision 1.2
sys/arch/evbppc/wii/wii_locore.S: revision 1.1
sys/arch/evbppc/conf/files.wii: revision 1.1
sys/arch/evbppc/wii/wii_locore.S: revision 1.2
sys/arch/evbppc/include/wii.h: revision 1.1
sys/arch/evbppc/conf/files.wii: revision 1.2
sys/arch/evbppc/wii/dev/exi.c: revision 1.1
sys/arch/evbppc/include/wii.h: revision 1.2
sys/arch/evbppc/conf/files.wii: revision 1.3
sys/arch/powerpc/powerpc/clock.c: revision 1.18
sys/arch/evbppc/include/wii.h: revision 1.3
sys/arch/evbppc/conf/files.wii: revision 1.4
sys/arch/evbppc/include/wii.h: revision 1.4
sys/arch/evbppc/wii/dev/exi.h: revision 1.1
sys/arch/evbppc/wii/dev/avenc.c: revision 1.1
sys/arch/evbppc/include/wii.h: revision 1.5
sys/arch/evbppc/include/wii.h: revision 1.6
sys/arch/evbppc/include/wii.h: revision 1.7
sys/arch/evbppc/wii/dev/avenc.h: revision 1.1
distrib/utils/embedded/mkimage: revision 1.79
sys/arch/evbppc/conf/WII: revision 1.1
sys/arch/evbppc/conf/INSTALL_WII: revision 1.1
distrib/utils/embedded/files/evbppc_wii_meta.xml: revision 1.1
sys/arch/evbppc/wii/dev/vireg.h: revision 1.1
sys/arch/evbppc/conf/WII: revision 1.2
distrib/utils/embedded/files/evbppc_wii_meta.xml: revision 1.2
sys/arch/evbppc/wii/dev/vireg.h: revision 1.2
sys/arch/evbppc/conf/WII: revision 1.3
sys/arch/evbppc/conf/WII: revision 1.4
usr.sbin/sysinst/arch/evbppc/md.c: revision 1.11
sys/arch/evbppc/wii/dev/ohci_hollywood.c: revision 1.1
sys/dev/usb/ehcivar.h: revision 1.52
sys/arch/evbppc/wii/pic_pi.c: revision 1.1
sys/arch/evbppc/wii/dev/ohci_hollywood.c: revision 1.2
etc/etc.evbppc/ttys: revision 1.8
sys/arch/evbppc/wii/dev/bwai.c: revision 1.1
sys/arch/evbppc/wii/dev/bwai.c: revision 1.2
sys/arch/evbppc/wii/dev/bwai.c: revision 1.3
sys/arch/evbppc/wii/autoconf.c: revision 1.1
sys/arch/evbppc/conf/Makefile.wii.inc: revision 1.1
sys/arch/evbppc/wii/dev/bwai.h: revision 1.1
sys/arch/evbppc/wii/autoconf.c: revision 1.2
sys/arch/evbppc/conf/Makefile.wii.inc: revision 1.2
powerpc: oea: Fix prefetchable mappings
Prefetchable mappings need PMAP_NOCACHE to get write-combine semantics.
powerpc: oea: Decode IBM750CL L2 cache information.
sdmmc: add support for optional delay after register write
wscons: Add HOLLYWOOD display and YUY2 pixel format types
wsfb: add support for optional "devcmap" property
A hardware driver can supply a pointer to a 16x 32-bit array to override
the default rasops device colour map in the "devcmap" property.
ehci: add EHCIF_32BIT_ACCESS flag to force 32-bit MMIO
fix comments: HID0 ICFI/DCFI are "flash invalidate", not "flush invalidate"
powerpc: fix delay for large (> ~5sec) values
When calculating the target timebase, promote '1000' on the RHS to ULL
to force 64-bit calculation, otherwise 'n * 1000' will overflow.
usb: increase USB_PORT_RESET_RECOVERY from 10ms to 20ms
I changed this from 250ms to 10ms back in 2021 based on a similar FreeBSD
change, but it seems to be a bit too aggressive for some platforms.
evbppc: Add initial support for the Nintendo Wii
wii: support RB_POWERDOWN
build fix: use dd with count=1 for compat with NetBSD dd(1)
wii: Add NTSC 480p support.
In addition to this, add VIIO_{GET,SET}REGS ioctl support to allow for
poking at video interface registers from userland. This is helpful for
debugging display issues.
wii: Add 128x48 icon to SD card image
wii: Fix a comment
wii: Add drivers for Broadway DSP and Audio interface.
0: [*] audio0 @ bwdsp0: Broadway DSP
playback: 16, 2ch, 48000Hz
record: unavailable
(P-) slinear_be 16/16, 2ch, { 48000 }
wii: Add screenblank support.
wii: Use screen dimming register for screen blanking.
wii: Add GPIO, I2C, and basic A/V encoder driver.
wii: Use A/V encoder volume controls instead of using a software filter.
wii: Simply DSP driver - no interrupt handler required.
wii: provide device names to intr_establish
wii$ intrctl list
interrupt id CPU0 device name(s)
pi irq 14 64769* hollywood0
hollywood irq 36 5872* ehci0
hollywood irq 39 58907* sdhc0
hollywood irq 40 4* sdhc1
hollywood irq 49 0* resetbtn0
pi irq 5 0* bwai0
wii: Add support for passing boot options to the kernel.
wii: Add External interface bus and RTC support
wii: Remove objcopy after kernel build.
HBC will do the right thing.
Add wsvt25 entries (off by default) for ttyE0-ttyE3.
Add support for "PAL" (576i) mode on Wii.
|
| 1.2.2.1 | 24-Jan-2024 |
martin | file evbppc_wii_meta.xml was added on branch netbsd-10 on 2024-02-03 11:47:05 +0000
|
| 1.5 | 18-Mar-2023 |
mlelstv | Can't use disklabel to find the real size of a disk since a fake disklabel
read from disk is trusted. Revert to use drvctl again.
|
| 1.4 | 18-Feb-2023 |
mlelstv | Handle arbitrary raw partitions.
Fetch geometry from disklabel to be consistent.
Use disktab format instead of the normal human-readable output for parsing
the disklabel.
Avoid overflows in size computation.
|
| 1.3 | 06-Oct-2018 |
jmcneill | resize_disklabel: if disk and partition is not specified, use kern.root_device/kern.root_partition sysctls
|
| 1.2 | 14-Apr-2017 |
jmcneill | branches: 1.2.10; 1.2.12;
Grow the MBR partition table entry for the BSD partition before
growing the disklabel.
|
| 1.1 | 06-Apr-2015 |
jmcneill | branches: 1.1.2; 1.1.4; 1.1.6;
Add support for auto-growing the root partition. Enable it for rpi.img.
|
| 1.1.6.1 | 21-Apr-2017 |
bouyer | Sync with HEAD
|
| 1.1.4.1 | 26-Apr-2017 |
pgoyette | Sync with HEAD
|
| 1.1.2.2 | 06-Aug-2015 |
snj | Pull up following revision(s) (requested by skrll in ticket #909):
distrib/sets/lists/etc/mi: revision 1.237
distrib/sets/lists/tests/mi: revision 1.613
distrib/utils/embedded/conf/armv7.conf: revisions 1.1, 1.2
distrib/utils/embedded/conf/beagleboard.conf: delete
distrib/utils/embedded/conf/evbarm.conf: revisions 1.21, 1.22
distrib/utils/embedded/conf/rpi.conf: revisions 1.28, 1.29
distrib/utils/embedded/conf/rpi_inst.conf: revisions 1.7, 1.8
distrib/utils/embedded/conf/usermode.conf: revision 1.5
distrib/utils/embedded/conf/x86.conf: revision 1.5
distrib/utils/embedded/files/resize_disklabel: revision 1.1
distrib/utils/embedded/mkimage: revisions 1.49, 1.55-1.59
etc/defaults/rc.conf: revision 1.133
etc/etc.evbarm/Makefile.inc: revisions 1.72, 1.76
etc/rc.d/Makefile: revision 1.93 via patch
etc/rc.d/resize_root: revisions 1.1-1.3
etc/rc.d/root: revision 1.5
sbin/resize_ffs/Makefile: revision 1.5
sbin/resize_ffs/resize_ffs.8: revisions 1.14-1.16
sbin/resize_ffs/resize_ffs.c: revisions 1.39-1.44
share/man/man5/rc.conf.5: revision 1.158, 1.159
tests/sbin/resize_ffs/Makefile: revision 1.4
tests/sbin/resize_ffs/common.sh: revision 1.14
tests/sbin/resize_ffs/t_check.sh: revision 1.1
tests/sbin/resize_ffs/t_grow.sh: revision 1.9
tests/sbin/resize_ffs/t_grow_swapped.sh: revision 1.3
tests/sbin/resize_ffs/t_shrink.sh: revision 1.8
tests/sbin/resize_ffs/t_shrink_swapped.sh: revision 1.2
fix image building:
- round up the total size of the disk image
- fix fdisk offset for netbsd ffs images
--
Make get_dev_size work on regular files too.
--
Use `!= -1' instead of `== 0' out of paranoia.
--
- Add -c to check to see if grow/shrink is required
- Divide by DEV_BSIZE when returning size of file.
- Update manpage
--
New sentence, new line. Sort option descriptions.
--
Add resize_root boot operation. If resize_root=YES in rc.conf then
the system attempts to resize the root file system to fill it's
partition prior to mounting read-write. Useful for things like AMI
file system images. May eventually be used by arm images after
coming up with similar solution for increasing the parition size.
--
- Add new tests for -c check flag in resize_ffs
--
Bump date for previous.
it's -> its
--
Handle case in grow() where last cylinder group is too small for ufs2.
Align with code in shrink().
--
factor out geometry calculation and use this also in CheckOnly mode.
be a bit more verbose in Verbose mode.
--
Add support for auto-growing the root partition. Enable it for rpi.img.
--
initialize resize before pulling in board config
--
add KEYWORD: interactive, honour resize_root_flags and
resize_root_postcmd rc vars
--
if the -p flag is specified, display a progress bar while growing the
file-system
--
show resize_ffs progress bar when resizing root partition
--
fix typo in previous; pass -y unconditionally to resize_ffs, not -p
--
Rename beagleboard.img to armv7.img. The new image includes the same
kernels as beagleboard.img plus support for Raspberry Pi 2, ODROID-C1,
Cubieboard2, Cubietruck, Hummingbird A31, and Banana Pi.
--
Properly spell X' name. From X(7):
The X.Org Foundation requests that the following names be
used when
referring to this software:
X
X Window System
X Version 11
X Window System, Version 11
X11
--
Add some documentation:
Tell what this does, and what it expects from conf files
--
Cleanup: make_filesystems is not used any longer, purge remains
--
More cleanup:
Instead of first overwriting the *_evbarm functions with own code,
and then calling them from the regular functions, directly put the
code into the regular functions.
No more functions from evbarm.conf are used now.
Some variables are still used!
--
define TOOL_MKUBOOTIMAGE for mkimage
--
fix mkubootimage
|
| 1.1.2.1 | 06-Apr-2015 |
snj | file resize_disklabel was added on branch netbsd-7 on 2015-08-06 21:13:43 +0000
|
| 1.2.12.1 | 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.2.10.1 | 20-Oct-2018 |
pgoyette | Sync with head
|
| 1.2 | 24-May-2020 |
jmcneill | Add support for hybrid MBR/GPT images.
|
| 1.1 | 24-May-2020 |
jmcneill | Add GPT support to mkimage.
|
