all: fix "Invalid internal option" warning from make

vax: use vax-mopcopy to generate usr/mdec/boot.mop from usr/mdec/boot;
include boot.mop in the base set once again.

OK rin@

branches: 1.19.54;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

branches: 1.18.18;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.17.12; 1.17.16;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

branches: 1.16.16;
Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

use RELINSTALL

Sprinkle some .WAIT's

Don't install boot.mop if ELF.

use check_RELEASEDIR

don't set the owner or group when installing into $RELEASEDIR

Use ${PRINTOBJDIR}. Install boot.fs

ramdisk-kernel needs ${.CURDIR}

Use
${MAKE}
instead of
make

branches: 1.5.2;
make snap_md_post do the right thing.

add ramdisk-kernel.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

branches: 1.2.2;
Put in new code to make a ramdisk system for installation.

Installation tools for vax.

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc

branches: 1.7.2;
make snap_md_post do the right thing.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

RCSID Police.

Don't hardcode in the current release information; generate it
automatically on the fly, by using
`sh ${BSDSRCDIR}/sys/conf/osrelease.sh -s`

Bump the REV to 12D to get in sync with param.h and newvers.sh.
This REALLY needs to be in ONE file and not in 11 files.

Installation tools for vax.

All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

branches: 1.5.20; 1.5.22;
Convert TNF licenses to new 2 clause variant

branches: 1.4.32; 1.4.34;
Remove references to xcontrib and xmisc now that they've been merged
into xbase.

Consistently use "netbsd-XXXXX" instead of "netbsd.XXXXX".

Fix a new nits. we never the dev entries for cd0 or cd1. opps. be
consistent with terminal types.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

Merge four separate copies of list2sh.awk runlist.sh (three identical
and one with slightly less options). Release build verified on amiga,
bebox and evbsh3. Vax build fails for unrelated reason.

branches: 1.3.44;
Put in new code to make a ramdisk system for installation.

RCSID Police.

Installation tools for vax.

Merge four separate copies of list2sh.awk runlist.sh (three identical
and one with slightly less options). Release build verified on amiga,
bebox and evbsh3. Vax build fails for unrelated reason.

branches: 1.2.44;
RCSID Police.

Installation tools for vax.

branches: 1.1.2; 1.1.14;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

fix few typos in comments.

branches: 1.20.2;
Add missing stuff for vax

Do not populate /dev on CD images by default, instead rely on init
doing the tmpfs / MAKEDEV magic.
On images for machines with serious ram shortage (where the additional
tmpfs hurts, like VAX) override this with CDDEV_POPULATE=true.
Should fix PR port-amd64/54776.

Consistently use ${RELEASEDIR}/${RELEASEMACHINE} instead of
${RELEASEDIR}/${MACHINE} (Paul Ripke)

branches: 1.17.2;
Now that we do not force debug sets off install CDs any more, explicitly
set CDRELEASE_NODEBUG everywhere.

branches: 1.16.10; 1.16.12;
Initial pass to be unaffected by build umask on build artifacts
1. ${MKDIR} -> ${MKDIR} ${MKDIRPERM}
2. ${CP} -> ${INSTALL} ${COPY} -m <perm>

branches: 1.15.2; 1.15.4;
Make sure to copy the language catalog files for sysinst, but do not
copy sysinst itself to / on the CD, and instead use the base version
for installation.

2nd try: make amd64, i386, sparc64 and vax iso images use full sets.
While there fix an old bug that makefs used the build hosts /etc/group
and passwd information when creating the image.
Thanks to Andreas Gustafsson for extensive testing.

Revert previous untill fallout has been fixed.

Add a new simple method to put whole sets on CD images (instead of
listing single binaries or patterns) and use those for the existing
ISO images.

Add libpthread.so* - new lzma needs it.

Punt custom dhcpcd hooks in favour up upstream hooks

CD images need libarchive if MKBSDTAR is yes.

branches: 1.8.2;
Adjust for sysinst move.

When uncompressing the kernel, allow overwriting of an existing one in the
cdrom content directory - this helps update builds.

Instead of running MAKEDEV inside the image content dir (which would only
work for root), make it emit a mtree spec file and pass that to makefs.
This should also work for unprivileged builds.
Problem pointed out by Izumi Tsutsui.

Pre-populate /dev on the CD - with rockridge extensions we can do this and
it saves us one tmpfs (or mfs) instance, which helps quite a bit on low
memory machines.

The current vax /boot is super slow unziping kernels - and this is a CD, wich
has space enough, so unzip the kernel on it to speed up the boot process.
XXX The /boot bug should nevertheless be fixed.

Use GENERIC instead of INSTALL (including the ramdisk) for this CD image
and mount the CD filesystem as root instead for installation.

branches: 1.2.6; 1.2.18;
use ${CDIMAGE} instead of ${CDBASE}.iso

branches: 1.1.2; 1.1.14; 1.1.22; 1.1.30; 1.1.38; 1.1.40;
Add an iso_image target (iso-image as a target name doesn't play well with
bsd.subdirs.mk) in distrib/makefile, which builds an iso image for $MACHINE
with binary sets, stored in ${RELEASEDIR}/iso. The image is bootable for:
alpha, amd64, cats, i386, pmax, sgimips, sparc, sparc64, sun3, vax.
mac68k/macppc no there yet because of missing feature in makefs.

call iso_image in distrib/ for iso-image in the top Makefile.

kernfs no longer needs a hacky workaround to make rootdev appear.

branches: 1.3.2; 1.3.6; 1.3.28;
Make it deal with /dev being the result of a "MAKDEV all" instead of
"MAKEDEV init" by mounting a ptyfs if needed.

If mounting the various tmpfs instances fails, we do not have enough
RAM installed. Tell the user about it and exec a single user shell
(instead of randomly failing later and hanging the machine.)

Use GENERIC instead of INSTALL (including the ramdisk) for this CD image
and mount the CD filesystem as root instead for installation.

branches: 1.1.2; 1.1.6;
Use GENERIC instead of INSTALL (including the ramdisk) for this CD image
and mount the CD filesystem as root instead for installation.

Enable basic command line editing in evbarm, sparc64 and vax installer shells

(Following the pattern in amd64)

When a user selects "exit installer" or hits ^Z in sysinst, the
calling install.sh runs a shell, plus shows a message indicating
they can type "exit" to return to the installer.

Add -E to the arguments to this shell, to enable command line editing,
(primarily for arrow keys, but basic emacs sequences will also work)

With the change of all the install.sh scripts in amd64, evbarm,
i386, sparc64 and vax are identical apart from NetBSD RCD tags and
the sysctl -nx kern.consdev check (some of the latter are definitely
either wrong, or have an incorrect comment attached. Will return
to later)

branches: 1.2.26;
Make sure to copy the language catalog files for sysinst, but do not
copy sysinst itself to / on the CD, and instead use the base version
for installation.

branches: 1.1.2; 1.1.6;
Use GENERIC instead of INSTALL (including the ramdisk) for this CD image
and mount the CD filesystem as root instead for installation.

Add missing stuff for vax

VAX boot.fs: Fix owner/group/permissions for VAX's boot.fs (Jan-Benedict Glaw)

(Initial patch from Christos Zoulas.) Don't create an archive based on local
permission bits and owner/group. Instead, feed a small manifest into `pax`
and let it to its work.

NB: Don't also feed in an entry for the current directory ".", as `pax` will
then archive all files in the current directory, in `readdir()` order.

more MKREPRO_TIMESTAMP fixes (for pax/tar generated files)

branches: 1.13.44; 1.13.48;
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}

branches: 1.12.32; 1.12.36;
Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

Install release files under "${RELEASEDIR}/${MACHINE}/..." instead of
"${RELEASEDIR}/...".

${RELEASEDIR} is never cleaned , and ${RELEASEDIR}/${MACHINE} is only
cleaned if UPDATE is not defined.

Invoke ${PAX} with '-O' so that various errors don't hang the make
or the command with an interactive question. (This also prevents
weird problems if a directory element of '-f path' is missing and
'make -j N' is being used).

ramdisk-kernel creates install.ram.gz now, not netbsd.INSTALL.gz

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

minor consistency tweaks

Replace "obs" with "bs" and "conv=osync" with "conv=sync" in the dd command.
This is necessary because POSIX doesn't specify "conv=osync" and GNU dd
doesn't implement it. I believe that in this case, where only one output
block should ever be generated and the input is a regular file, bs/sync is
equivalent to obs/osync.

Simplify even more.

Simplify a bit. Use installboot.

Convert floppy to use ustarfs

use distrib/common/Makefile.image, allowing for UNPRIVED builds.
(untested)

branches: 1.1.2;
Add a makefile to make boot.fs for vax.

use distrib/common/Makefile.image, allowing for UNPRIVED builds.
(untested)

branches: 1.1.2;
Add a makefile to make boot.fs for vax.

Convert floppy to use ustarfs

use distrib/common/Makefile.image, allowing for UNPRIVED builds.
(untested)

branches: 1.3.34;
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc

RCSID Police.

Installation tools for vax.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.3.26;
Spell removable with only two es. Inspired by jmc@openbsd.

RCS Id Police.

Installation tools for vax.

branches: 1.3.44;
Add $HOME to profiles, closes pr 4323 (from Tatoku Ogaito)

RCS Id Police.

Installation tools for vax.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.3.42;
Fix listfiles to handle object directories. Patches supplied by
Izumi Tsutsui in PR misc/7628.

RCSID Police.

Installation tools for vax.

Merge four separate copies of list2sh.awk runlist.sh (three identical
and one with slightly less options). Release build verified on amiga,
bebox and evbsh3. Vax build fails for unrelated reason.

branches: 1.15.32;
Use ${HOST_SH} instead of `sh'.

If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.

Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc

Add MTREE?= to add Makefiles and use when running mtree

Use symbol MTREECONF instead of MTREE to refer configuration file
to avoid conflicts. Pointed out by chs@netbsd.org.

make -> ${MAKE}.
Noted by Olaf Seibert on current-users.

Change all ocurrences of "crunchgen" to ${CRUNCHGEN}

Use
${MAKE}
instead of
make

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Sync with the recent crunchgen changes.
- Remove *.cro files and not the obsoleted *.lo files.

From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.

Modify all calls to newfs in ramdisk/miniroot creation to include
the needed endianism of the architecture. One step towards cross-building
releases.

Not touched are newfs calls in install scripts as they run on the desired
machine and thus default correctly.

distclean is a synonym for cleandir

RCSID Police.

Update for changes to vnconfig(8).

Installation tools for vax.

Avoid more obsolescent binary primaries not supported by crunched test(1).

See PR/54835 and PR/56983 for details.

branches: 1.5.32; 1.5.102;
netbsd.org->NetBSD.org

sweep of my licenses (userland files w/o only my copyright) for
consistency. (no functional changes)

move RCS Id, and fix bogus comment start (# instead of # ?!?!)

RCSID Police.

Installation tools for vax.

more gnu directory removal.

branches: 1.4.30; 1.4.34;
Use the rescue terminfo.db in our images instead of termcap.

branches: 1.3.38;
Remove update from all ramdisks.

branches: 1.2.6;
RCSID Police.

Installation tools for vax.

Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Sort some entries.

branches: 1.9.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

branches: 1.8.12;
MAKEDEV.subr no longer exists. Don't install it in any ramdisk
or miniroot images.

Treate MAKEDEV.subr just as we treat MAKEDEV when creating ramdisk
images or miniroot images.

/usr/sbin/installboot was missing from installation media.

branches: 1.5.6;
Need /etc/netconfig.

Remove update from the miniroot lists.

branches: 1.3.6;
Oops, had forgotten hard link to fsck_ffs. Pointed out by Roger Ivie.

RCSID Police.

Installation tools for vax.

branches: 1.2.44;
RCSID Police.

Installation tools for vax.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

branches: 1.2.44;
RCS Id Police.

Installation tools for vax.

branches: 1.1.4;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

It turns out vax liveimage requires INSTALLBOOT_AFTER_DISKLABEL.

It looks tools disklabel(8) doesn't preserve installed bootblock
on creating a new label. Confirmed on simh.

Should be pulled up to at least netbsd-10.

branches: 1.4.10; 1.4.12;
Use the special device name "ROOT." in /etc/fstab not just on the arm
images, but also on the bootable disk images of other ports, so that
they can be booted from differently named devices. Merge the i386 and
amd64 -live-sd0root and -live-wd0root images into a single live image
per port, bootable both from usb media and in qemu. Drop the -xx0root
suffixes from image names as they are no longer meaningful.

branches: 1.3.30; 1.3.32;
Allow overriding live-image and install-image sizes by
INSTIMAGEMB (for install-images), USBIMAGEMB (for x86 sd0root liveimages),
and EMUIMAGEMB (for other liveimages) variables.
Per discussion on current-users@:
http://mail-index.NetBSD.org/current-users/2012/10/29/msg021368.html

branches: 1.2.2;
Change the naming scheme of "live" images and usb install images
to incorporate the OS name and version.

XXX should also not hardcode ${BOOTDISK} in the name, but that would
require reordering stuff and more testing than I have time for right now.
Another day.

As discussed on current-users@ back in March, with some adjustments.

branches: 1.1.2; 1.1.4;
Add "live-image" and "install-image" target support to build.sh.

"live-image" target builds pre-installed disk images that can be used on
emulators or boot from USB memory sticks to try NetBSD without installation.
Currently amd64, i386, pmax, sparc, sparc64, sun2, sun3, and vax
(which have working emulators and don't require extra tools like preparing
msdosfs or partitioning MD label structures) support this target.

"install-image" target builds an bootable installation disk image that can
be used as an install CD but burned into USB memory sticks etc.
Current only amd64 and i386 (which would support USB boot) have this target.

For more details (and known issue) see following posts on netbsd-bugs@:
http://mail-index.NetBSD.org/netbsd-bugs/2011/08/06/msg023639.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/09/23/msg024207.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/07/msg025166.html
http://mail-index.NetBSD.org/netbsd-bugs/2011/12/08/msg025178.html

No particular comments about implementation, and
"go ahead" comments from mrg@, riz@ and christos@.

Closes PR toolchain/45153 and PR misc/45155.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Revert STRIPPROG -> STRIP

STRIP -> STRIPPROG

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.

+= for MAKEFS_FLAGS

branches: 1.24.8; 1.24.12;
bump md image size

Fix PR install/47123 (sysinst fails with "openpty() failed" on many ports):
Add "ipty" to MAKEDEVTARGETS in miniroot/Makefile.inc since "MAKEDEV all"
no longer creates /dev/pty* device nodes and miniroot doesn't mount ptyfs.

branches: 1.22.2;
All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

- Increase MAXPARTITIONS for vax from 8 to 16, using the standard NetBSD
mechanism to ensure all existing /dev nodes continue to work
- Adjust boot block layout to fit additional partitions
- Adjust number of inodes on install media

branches: 1.20.6; 1.20.8;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.16.32;
Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

It seems the miniroot needs more inodes now. Decrease density to 4k so that
it builds again.

don't bother copying or generating etc/spwd.db, as the miniroot was
switched to libhack a little while ago

branches: 1.13.2;
consistently use "${INSTALLBOOT} -v ..."

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

- replace image_md_post: target with IMAGE_MD_POST variable, and use
that after building ${IMAGE}
- use ${IMAGEBUILT} to ensure that IMAGE_MD_POST is only run if IMAGE changes

switch to "${INSTALLBOOT} -m vax"

ensure all sysinst-using makefs generated images have at least 15 inodes free,
and be consistent how MAKEFS_FLAGS is defined.

Make ramdisk 1.5MB in size. cleanup miniroot makefile

Add -o density=5k to make sure there are enough inodes.

Switch from disklabel to installboot. (since installboot will be so much
easier to make a host tool)

Commit work-in-progess rototill of distrib/miniroot and associated machine
dependent files:

- Use infrastructure from distrib/common to build file system images with
crunchgen-ed programs from a list file.

- Non root ("UNPRIVED") builds from a read-only source tree are possible,
as makefs(8) replaces vnconfig(8)/vnd use, devices are generated using
common/makedev2spec.awk, etc.

- Cross builds should be possible, except that some ports need cross-compile
host tool versions of installboot and any appropriate host disk labelling
tools.
XXX: pmax, sparc and vax need fixing for this!

- This code has NOT YET BEEN TESTED on most of the ports.
It should work, but it is extremely likely that the file system
parameters may need tweaking to get things to fit.
See MAKEFS_FLAGS in sparc/miniroot/Makefile.inc for an example.
If assistance is required, please ask!

Fix tag broken in previous commit. Oops.

Dummy commit to lose -kk.

branches: 1.1.6;
Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

branches: 1.4.32;
netbsd.org->NetBSD.org

sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

nvi has moved.

branches: 1.15.2;
All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

branches: 1.14.2; 1.14.4;
Update location of "less" source directory to the build of various
install medias.

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

No need to install /usr/share/zoneinfo into miniroot
because libc functions in libhack doesn't require it and
zoneinfo files seem to get larger since tzcode2009k import.
(due to 64bit time_t support?)

Briefly tested sysinst on sparc miniroot.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

usr.bin/vi/build -> usr.bin/nvi/build

branches: 1.7.26;
/usr/sbin/installboot was missing from installation media.

branches: 1.6.2;
don't bother copying or generating etc/spwd.db, as the miniroot was
switched to libhack a little while ago

branches: 1.5.2;
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Commit work-in-progess rototill of distrib/miniroot and associated machine
dependent files:

- Use infrastructure from distrib/common to build file system images with
crunchgen-ed programs from a list file.

- Non root ("UNPRIVED") builds from a read-only source tree are possible,
as makefs(8) replaces vnconfig(8)/vnd use, devices are generated using
common/makedev2spec.awk, etc.

- Cross builds should be possible, except that some ports need cross-compile
host tool versions of installboot and any appropriate host disk labelling
tools.
XXX: pmax, sparc and vax need fixing for this!

- This code has NOT YET BEEN TESTED on most of the ports.
It should work, but it is extremely likely that the file system
parameters may need tweaking to get things to fit.
See MAKEFS_FLAGS in sparc/miniroot/Makefile.inc for an example.
If assistance is required, please ask!

fix typo.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.

bump

branches: 1.35.24;
+= for MAKEFS_FLAGS

branches: 1.34.8; 1.34.12;
Bump INSTALL ramdisk size slightly to allow building with DBG=-g.

Slightly bump ramdisk size, so the content fits even when compiled with
gcc 4.8 (usually binaries are smaller or same size, this increase is
strange)

Backout previous - it was apparently untested and breaks the build. The
commit message did not mention any reasons for the bump either.

bump md image size

branches: 1.30.2;
All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

Include racd0 and racd1 on ramdisk

Add a Makefile dependency

Bump the ramdisk size so that the contents fits again.

branches: 1.26.6; 1.26.8;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

Replace references to local and now no-longer-existing termcap files
with references to ${DISTRIBB}/common/termcap. Hi, abs@!

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

branches: 1.20.12;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

minor consistency tweaks

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Set DBG=-Os for libhack.

ensure all sysinst-using makefs generated images have at least 15 inodes free,
and be consistent how MAKEFS_FLAGS is defined.

Add some free inodes and add ra2/ra3.

Make ramdisk 1.5MB in size. cleanup miniroot makefile

- Be consistent how libhack is used: If extra HACKOBJS (e.g., gethost.o) are
required, define them before pulling in libhack/Makefile.inc so that the
dependencies work correctly.
- Other minor cleanups

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc

Add MTREE?= to add Makefiles and use when running mtree

Use symbol MTREECONF instead of MTREE to refer configuration file
to avoid conflicts. Pointed out by chs@netbsd.org.

Change all ocurrences of "crunchgen" to ${CRUNCHGEN}

Use
${MAKE}
instead of
make

branches: 1.5.4;
Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Patches to update to reality, from Todd Whitesel.

Sync with the recent crunchgen changes.
- Remove *.cro files and not the obsoleted *.lo files.

From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

Add MTREE?= to add Makefiles and use when running mtree

Use symbol MTREECONF instead of MTREE to refer configuration file
to avoid conflicts. Pointed out by chs@netbsd.org.

Change all ocurrences of "crunchgen" to ${CRUNCHGEN}

Use
${MAKE}
instead of
make

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Sync with the recent crunchgen changes.
- Remove *.cro files and not the obsoleted *.lo files.

From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.

Put in new code to make a ramdisk system for installation.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.2.38;
Patches to update to reality, from Todd Whitesel.

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

sweep of my licenses (userland files w/o only my copyright) for
consistency. (no functional changes)

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

sweep of my licenses (userland files w/o only my copyright) for
consistency. (no functional changes)

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

after checking and setting DONEPROFILE, export it so that children of the
shell (e.g. programs and shells invoked via sysinst) don't try to run
sysinst again. Fixes PR#7805.

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

sweep of my licenses (userland files w/o only my copyright) for
consistency. (no functional changes)

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Put in new code to make a ramdisk system for installation.

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.9.34; 1.9.36;
All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

branches: 1.8.32; 1.8.56; 1.8.58;
netbsd.org->NetBSD.org

sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

rename (revert) memory disk filename /dev/mdX -> /dev/mdXa

Fix root device name md0a -> md0

Don't start update.

branches: 1.2.4;
after checking and setting DONEPROFILE, export it so that children of the
shell (e.g. programs and shells invoked via sysinst) don't try to run
sysinst again. Fixes PR#7805.

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Put in new code to make a ramdisk system for installation.

All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

Use special ed and umount.

branches: 1.28.2; 1.28.4;
Update location of "less" source directory to the build of various
install medias.

Remove unnecessary gnu/usr.bin path from SRCDIRS.

Use src/distrib/utils/x_gzip in all install ramdisks/miniroots for now
since installation file systems might be flooded by -llzma.

branches: 1.25.4;
Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Fix indent on common/protocols changes.

branches: 1.18.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.16.12; 1.16.14;
Since /etc/services has gotten rather large, use a minimal one for install
kernels. (mount_nfs is notably the only binary that doesn't gracefully deal
with the lack of an /etc/services file, it appears.)

/usr/sbin/installboot was missing from installation media.

branches: 1.14.2;
Add -lz, now needed by gzip.

Now that usr.bin/ftp/Makefile supports SMALLPROG and SMALLPROG_INET6,
we don't need distrib/utils/x_ftp anymore...

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

link mount_mfs to newfs

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

nuke slattach and restore/rrestore to get back space taken by new rpc code

add netconfig

Fix a new nits. we never the dev entries for cd0 or cd1. opps. be
consistent with terminal types.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

Patches to update to reality, from Todd Whitesel.

Remove update from the miniroot lists.

branches: 1.3.4;
Generate the /dist/obsolete_* files used by sysinst from the obsolete lists
in sets/lists/*. The sript sets/makeobsolete concatenates the mi and md
obsolete list files all or a specified set and dumps it in a file, in a
subdir specified on the command line (inspired from the maketar and makeflist
files).
Use this for all the sysinst-based installs.
Untested for non-i386, and the md obsolete list may be wrong or incomplete.
Each postmaster is supposed to check this on his port.

Fix listfiles to handle object directories. Patches supplied by
Izumi Tsutsui in PR misc/7628.

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

Generate the /dist/obsolete_* files used by sysinst from the obsolete lists
in sets/lists/*. The sript sets/makeobsolete concatenates the mi and md
obsolete list files all or a specified set and dumps it in a file, in a
subdir specified on the command line (inspired from the maketar and makeflist
files).
Use this for all the sysinst-based installs.
Untested for non-i386, and the md obsolete list may be wrong or incomplete.
Each postmaster is supposed to check this on his port.

Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

nuke slattach and restore/rrestore to get back space taken by new rpc code

Remove update since it doesn't exist anymore

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

Patches to update to reality, from Todd Whitesel.

use x_ping for ping, remove reference to -lipsec.
(sorry if you have specific need for "real" ping)

Remove update from all ramdisks.

branches: 1.1.2; 1.1.6;
Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

Put in new code to make a ramdisk system for installation.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

branches: 1.1.44;
Put in new code to make a ramdisk system for installation.

Convert to New Distrib World Order, removing pre-sysinst goop whilst here.
Per discussion with Matt Thomas, who said he'd test this if I did the
conversion.

sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Put in new code to make a ramdisk system for installation.

branches: 1.11.34;
- whitespace consistency cleanup
- build (mdset/nm/strip) into ${filename} as one rule, and move ${filename}.gz
into separate rule
- rename MDSET.${filename}.nosymbols -> MDSET_NOSYMBOLS.${filename}
- rename MDSET.${filename}.post -> MDSET_POST.${filename}, and don't do
suffix handling here
- rework suffix handling:
- rename MDSET.${filename}.suffixes -> MDSET_SUFFIXES.${filename},
and change from list of suffixes to list of "suffix cmdtobuildsuffix",
where cmdtobuildsuffix is the name of the variable containing the
command to build ${filename}.${suffix} (available as "${.TARGET}").
- for each ${filename}.${suffix}, depend upon ${filename} and use
${cmdtobuildsuffix} to create the former.
- add separate ${filename}.${suffix}.gz rule
- mipsco & pmax: rename "install.gz" to "netbsd-INSTALL.gz", for
consistency and so the target to build the mdset kernel doesn't get
confused with general "install" target

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Makefile.mdset:
replace
TARGETS = KERNEL IMAGE [...]
with
MDTARGETS = KERNEL IMAGE FILENAME [...]
If FILENAME is "-", use "netbsd.${KERNEL}" as the target filename

The rest:
Update for new MDTARGETS syntax. In some cases, the kernel
name from the "old" method will be used to override the default.

- don't pull in <bsd.prog.mk> in Makefile.mdset; do that in the caller instead
- renamed optional post-strip action variable from ${KERNEL}.post to
netbsd.${KERNEL}.post

convert to using distrib/common/Makefile.mdset

minor cleanup

Make sure <bsd.own.mk> is pulled in before ${PRINTOBJDIR} is used.

Convert to using ${MDSETIMAGE}.

Provide a default value for $MDSETIMAGE and pull in bsd.own.mk to have
it overriden as needed for cross/-current builds.

Use ${PRINTOBJDIR}. Install boot.fs

Build the INSTALL ramdisk kernel

branches: 1.2.34;
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc

Installation tools for vax.

branches: 1.2.34;
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc

Installation tools for vax.

branches: 1.2.34;
replace local ${REV} with ${DISTRIBREV} from distrib/Makefile.inc

Installation tools for vax.