Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Revert STRIPPROG -> STRIP

STRIP -> STRIPPROG

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.

+= for MAKEFS_FLAGS

branches: 1.24.8; 1.24.12;
bump md image size

Fix PR install/47123 (sysinst fails with "openpty() failed" on many ports):
Add "ipty" to MAKEDEVTARGETS in miniroot/Makefile.inc since "MAKEDEV all"
no longer creates /dev/pty* device nodes and miniroot doesn't mount ptyfs.

branches: 1.22.2;
All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

- Increase MAXPARTITIONS for vax from 8 to 16, using the standard NetBSD
mechanism to ensure all existing /dev nodes continue to work
- Adjust boot block layout to fit additional partitions
- Adjust number of inodes on install media

branches: 1.20.6; 1.20.8;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.16.32;
Rename a large chunk of the make(1) variables which refer to a
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC

For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo

Document all of these in bsd.README.

This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.

It seems the miniroot needs more inodes now. Decrease density to 4k so that
it builds again.

don't bother copying or generating etc/spwd.db, as the miniroot was
switched to libhack a little while ago

branches: 1.13.2;
consistently use "${INSTALLBOOT} -v ..."

yet another distrib overhaul:
- move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib
(fixes problem caused by implicit include of ../Makefile.inc in certain
submake conditions triggered by makefiles not yet in tree)
- removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of
etc/Makefile to create all the release directories
- renamed RELINSTALL to RELEASE_INSTALL
- renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR
- renamed MDSETDIR to MDSET_RELEASEDIR
- removed ITARGET
- move release target from top level to appropriate subdirectory
- ensure release target has correct depends
- replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD
- Makefile.image: add realall: ${IMAGE}

replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

- replace image_md_post: target with IMAGE_MD_POST variable, and use
that after building ${IMAGE}
- use ${IMAGEBUILT} to ensure that IMAGE_MD_POST is only run if IMAGE changes

switch to "${INSTALLBOOT} -m vax"

ensure all sysinst-using makefs generated images have at least 15 inodes free,
and be consistent how MAKEFS_FLAGS is defined.

Make ramdisk 1.5MB in size. cleanup miniroot makefile

Add -o density=5k to make sure there are enough inodes.

Switch from disklabel to installboot. (since installboot will be so much
easier to make a host tool)

Commit work-in-progess rototill of distrib/miniroot and associated machine
dependent files:

- Use infrastructure from distrib/common to build file system images with
crunchgen-ed programs from a list file.

- Non root ("UNPRIVED") builds from a read-only source tree are possible,
as makefs(8) replaces vnconfig(8)/vnd use, devices are generated using
common/makedev2spec.awk, etc.

- Cross builds should be possible, except that some ports need cross-compile
host tool versions of installboot and any appropriate host disk labelling
tools.
XXX: pmax, sparc and vax need fixing for this!

- This code has NOT YET BEEN TESTED on most of the ports.
It should work, but it is extremely likely that the file system
parameters may need tweaking to get things to fit.
See MAKEFS_FLAGS in sparc/miniroot/Makefile.inc for an example.
If assistance is required, please ask!

Fix tag broken in previous commit. Oops.

Dummy commit to lose -kk.

branches: 1.1.6;
Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

branches: 1.4.32;
netbsd.org->NetBSD.org

sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

nvi has moved.

branches: 1.15.2;
All apply to vax only:
- Drop KERNFS from INSTALL kernel
- Add dmesg to sysinst ramdisk
- Add 'ramdisk' target to MAKEDEV and use
- Add dhcpcd to sysinst ramdisk
- Drop old install.md script
- Misc install image cleanup (reduce diff to zaurus of all things)

branches: 1.14.2; 1.14.4;
Update location of "less" source directory to the build of various
install medias.

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

No need to install /usr/share/zoneinfo into miniroot
because libc functions in libhack doesn't require it and
zoneinfo files seem to get larger since tzcode2009k import.
(due to 64bit time_t support?)

Briefly tested sysinst on sparc miniroot.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

usr.bin/vi/build -> usr.bin/nvi/build

branches: 1.7.26;
/usr/sbin/installboot was missing from installation media.

branches: 1.6.2;
don't bother copying or generating etc/spwd.db, as the miniroot was
switched to libhack a little while ago

branches: 1.5.2;
replace _SRC_TOP_ with NETBSDSRCDIR, since the latter is the "public" version

Commit work-in-progess rototill of distrib/miniroot and associated machine
dependent files:

- Use infrastructure from distrib/common to build file system images with
crunchgen-ed programs from a list file.

- Non root ("UNPRIVED") builds from a read-only source tree are possible,
as makefs(8) replaces vnconfig(8)/vnd use, devices are generated using
common/makedev2spec.awk, etc.

- Cross builds should be possible, except that some ports need cross-compile
host tool versions of installboot and any appropriate host disk labelling
tools.
XXX: pmax, sparc and vax need fixing for this!

- This code has NOT YET BEEN TESTED on most of the ports.
It should work, but it is extremely likely that the file system
parameters may need tweaking to get things to fit.
See MAKEFS_FLAGS in sparc/miniroot/Makefile.inc for an example.
If assistance is required, please ask!

fix typo.

Updagte the VAX bits so they actually work. Use the common method of building
miniroots. Fix the ramdisk bits. Use the INSTALL kernel. This stuff has
really suffered from bitrot.

branches: 1.1.2;
Put in new code to make a ramdisk system for installation.