Specify -fno-unwind-tables to shring ramdisk binaries.

Saves ~8KB.

+= for MAKEFS_FLAGS

branches: 1.47.2;
bump

branches: 1.46.6;
Increase the image size to 1700KB.
At this point, the build succeeds if the build path is short,
but may fail if long. Thanks for martin@ and tsutsui@.

Increase the image size to 1600KB.

Increase the image size to 1500KB.

Revert previous (to grow the ramdisk size).
> kill ping6,rtsol,df,dmesg,sync,pwd to make things fit.

kill ping6,rtsol,df,dmesg,sync,pwd to make things fit.

- add dhcpcd support to x68k install ramdisk
- enable bpf(4) in INSTALL kernel for dhcpcd
- bump ramdisk size from 1400k to 1440k
No objection on port-x68k.

branches: 1.40.6; 1.40.8; 1.40.12;
Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

Add ${DISTRIBDIR}/common/termcap (which superseded local one) to IMAGEDEPENDS.

termcap.vt was removed.
http://mail-index.netbsd.org/source-changes/2009/09/20/msg001101.html

Ten identical list.inet6 files, or one common/list.inet6?
Not a difficult choice.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

${NETBSDSRCDIR}/distrib/common/protocols => ${DISTRIBDIR}/common/protocols
${NETBSDSRCDIR}/distrib/common/services => ${DISTRIBDIR}/common/services

Move sun2, sun3 & x68k across to the common distrib etc/services, and
while here reduce it from 1180 to 794 bytes (whitespace & comment cleanup)

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Increase the image size from 1300KB to 1400KB.

branches: 1.29.2; 1.29.8;
Increase ramdisk size.

branches: 1.28.8; 1.28.10; 1.28.12;
Stop installing inst.fs.gz (and kern.fs).
inst.fs of 1200KB is too small to contain a recent image.

branches: 1.27.4;
Rev 1.24 that I had changed was a mistake. sorry.
1200K is the total size of a floppy.

Only use ping6 and rtsol if ${USE_INET6} != "no".
Part of PR 28994.

Add French, German and Polish sysinstmsgs to all ramdisks that include sysinst
expect those where at least one of the language variants isn't built,
and those that are known not to have enough space (i386 ramdisk-tiny).
Files added to list.sysinst, list.sysinst.en is used when these files
cannot be added.
This might hit a size limit on another build - but I have no (sane) way of
testing it.

branches: 1.24.2;
Increase the image size, to build.

Rework how SMALLPROG was being used and how INET6 support was enabled.
There's two variables added to Makefile.crunch:

SMALLPROG If 1, add SMALLPROG=1 to CRUNCHENV. [default: 1]
This can be used by various Makefiles to
determine if a `small' version of the program
is required.

SMALLPROG_INET6 If 1 and SMALLPROG == 1, add SMALLPROG_INET6=1
to CRUNCHENV. [default: 0]
This can be used by various Makefiles to
determine if the `small' version has INET6
support enabled.

Only enable SMALLPROG_INET6 for programs on the ramdisks that have INET6 in
the appropriate kernel, and cleanup INET6 setting.
(Note: this means that sysinst won't get INET6 support if the kernel
it's running on doesn't have it).

This change saves a fair bit of space on various install images
(including i386 ramdisk-{ps2,small,tiny}) that didn't have INET6 in
the kernel but were unconditionally getting INET6 support in their tools.

Add missing /dev/sram. it is used by memswitch(8).

branches: 1.21.2;
- reorganise to be more consistent with other distrib/* directories
(no need for a "common" subdir which contains stuff only really
referenced by one other directory)
- use Makefile.tarfloppy instead of local code to build floppies
- use .WAIT in the top-level Makefile appropriately
- install inst.fs directly from ramdisk/Makefile rather than providing
separate inst/Makefile

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

Adjust ramdisk sizes.

Pull common files into newly created ramdisk-common directory.

Reduce ramdisk size by using hacked commands in distrib/utils.

Use
${MAKE}
instead of
make

branches: 1.15.4;
use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Give up support of 4MB RAM machines for standard sysinst-based installer.
Restricted small installer must be used on those machines.

Use new target echoimage to get the image name.

Make it be compiled again.

branches: 1.11.4;
Build INSTALL kernel automatically.
obj directory handling for read-only /usr/src.
Refer DESTDIR.

Sync with the recent crunchgen changes.
- Remove *.cro files and not the obsoleted *.lo files.

From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.

Descend to the utils dir for targets clean and depend.

Size hacks.
Use libhack, x_route, x_ifconfig, init_s in the distrib/utils
to reduce the ramdisk size.

branches: 1.7.2;
Mostly imported from netbsd-1-3 branch (1.3.3 and 1.3.4)
- Set ${driveunits} correctly.
- swapon on small memory machines.

Modify all calls to newfs in ramdisk/miniroot creation to include
the needed endianism of the architecture. One step towards cross-building
releases.

Not touched are newfs calls in install scripts as they run on the desired
machine and thus default correctly.

Back out previous patches: it is not necessory now.

Flush buffer cache.

distclean is a synonym for cleandir

We don't need to manually flush the buffer cache after ``vnconfig -u''
anymore.

Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Pull common files into newly created ramdisk-common directory.

Use
${MAKE}
instead of
make

branches: 1.8.4;
use bsd.kernobj.mk to tell us KERNOBJDIR for compiled kernels.

Sync with the recent crunchgen changes.
- Remove *.cro files and not the obsoleted *.lo files.

From Bill Studenmund commit message:
> 3) Generate .cro files rather than .lo files. .lo now is used for "local
> objects" - obj's for the host machine not the target machine.

Modify all calls to newfs in ramdisk/miniroot creation to include
the needed endianism of the architecture. One step towards cross-building
releases.

Not touched are newfs calls in install scripts as they run on the desired
machine and thus default correctly.

Back out previous patches: it is not necessory now.

Flush buffer cache.

distclean is a synonym for cleandir

We don't need to manually flush the buffer cache after ``vnconfig -u''
anymore.

Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

branches: 1.4.26;
Spell removable with only two es. Inspired by jmc@openbsd.

- reorganise to be more consistent with other distrib/* directories
(no need for a "common" subdir which contains stuff only really
referenced by one other directory)
- use Makefile.tarfloppy instead of local code to build floppies
- use .WAIT in the top-level Makefile appropriately
- install inst.fs directly from ramdisk/Makefile rather than providing
separate inst/Makefile

Pull common files into newly created ramdisk-common directory.

branches: 1.1.12;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Dead.

Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

branches: 1.11.32;
netbsd.org->NetBSD.org

- reorganise to be more consistent with other distrib/* directories
(no need for a "common" subdir which contains stuff only really
referenced by one other directory)
- use Makefile.tarfloppy instead of local code to build floppies
- use .WAIT in the top-level Makefile appropriately
- install inst.fs directly from ramdisk/Makefile rather than providing
separate inst/Makefile

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

Reduce ramdisk size by using hacked commands in distrib/utils.

branches: 1.7.2;
sweep of my licenses (userland files w/o only my copyright) for
consistency. (no functional changes)

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Don't start update.

branches: 1.4.4;
after checking and setting DONEPROFILE, export it so that children of the
shell (e.g. programs and shells invoked via sysinst) don't try to run
sysinst again. Fixes PR#7805.

branches: 1.3.2;
They won't work :-p

Add $HOME to profiles, closes pr 4323 (from Tatoku Ogaito)

branches: 1.1.2;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Dead.

Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

PR install/54780: in the (of course totally unlikely) case that sysinst
should crash, run "stty sane".

branches: 1.15.48; 1.15.50;
TERM=x68k -> vt220. sysinst works again.

branches: 1.14.32;
netbsd.org->NetBSD.org

- reorganise to be more consistent with other distrib/* directories
(no need for a "common" subdir which contains stuff only really
referenced by one other directory)
- use Makefile.tarfloppy instead of local code to build floppies
- use .WAIT in the top-level Makefile appropriately
- install inst.fs directly from ramdisk/Makefile rather than providing
separate inst/Makefile

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

Reduce ramdisk size by using hacked commands in distrib/utils.

branches: 1.10.2;
sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

rename (revert) memory disk filename /dev/mdX -> /dev/mdXa

Fix root device name md0a -> md0

Don't start update.

branches: 1.5.4;
after checking and setting DONEPROFILE, export it so that children of the
shell (e.g. programs and shells invoked via sysinst) don't try to run
sysinst again. Fixes PR#7805.

Run /start in the same shell.
Reduce memory use.

branches: 1.3.2;
They won't work :-p

Add $HOME to profiles, closes pr 4323 (from Tatoku Ogaito)

branches: 1.1.2;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

Reduce ramdisk size by using hacked commands in distrib/utils.

branches: 1.10.2;
sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

swapon only if physmem <= 4MB.
Other message cosmetics.

SMALL kernel is not included in kern.tgz.

branches: 1.6.2;
Mostly imported from netbsd-1-3 branch (1.3.3 and 1.3.4)
- Set ${driveunits} correctly.
- swapon on small memory machines.

Setup $driveunits properly.

1) Remove all vestiges of tar from src/distrib. Use pax and appropriate
commandlines for all tar operations. (work supplied by Matt Green)
2) Update arch/*/md.c to deal with new sysinst/run.c. Special case
anything that needs to do a redirect or a pipe.
3) #if 0 some unused code in target.c. This code will need to be updated,
or special cased with do_system.

Big thank you to Matt for all his work on this.

We support only SCSI disks.

They won't work :-p

branches: 1.1.2;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Use more shrinked tools in src/distrib/utils.

Saves ~24KB.

Revert previous (to grow the ramdisk size).
> kill ping6,rtsol,df,dmesg,sync,pwd to make things fit.

kill ping6,rtsol,df,dmesg,sync,pwd to make things fit.

Recent sysinst seems to require chroot.

branches: 1.31.2; 1.31.4;
Remove unnecessary gnu/usr.bin path from SRCDIRS.

branches: 1.30.2;
Remove mount_kernfs(8). INSTALL kernel doesn't have file-system KERNFS
and dmesg(8) is enough for sysinst.

Adjust file lists for recent move:
usr/sbin/chown -> sbin/chown
usr/bin/chgrp -> bin/chgrp

Remove terminfo.db as it's now embedded in libterminfo.

Use the rescue terminfo.db in our images instead of termcap.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

Nothing needs disktab anymore, so we'd rather have an inode and
slightly over 1K of space on install media...

Move sun2, sun3 & x68k across to the common distrib etc/services, and
while here reduce it from 1180 to 794 bytes (whitespace & comment cleanup)

Alas poor dot.hdprofile. I knew him... not at all Horatio. (Remove)

Fix indent and sort some entries.

branches: 1.21.2;
Use the cutdown distrib/common/services and distrib/common/protocols
rather than the full fat etc versions

Add -lprop to the LIBS line so that ifconfig will link.

branches: 1.19.20; 1.19.22;
Delete the:
SPECIAL dmesg srcdir distrib/utils/x_dmesg
line from all the ramdisk 'list' files. dmesg/Makefile will add -DSMALL
if SMALLPROG is defined (which it is by Makefile.crunch).

Only use ping6 and rtsol if ${USE_INET6} != "no".
Part of PR 28994.

Separate mount_* from mount. These are not the same substance
currently.
It makes sysinst work. This problem was reported by Yasushi Oshima
in japanese x68k mailing list (x6netbsd-users) on Apr 2003.

Now that usr.bin/ftp/Makefile supports SMALLPROG and SMALLPROG_INET6,
we don't need distrib/utils/x_ftp anymore...

- reorganise to be more consistent with other distrib/* directories
(no need for a "common" subdir which contains stuff only really
referenced by one other directory)
- use Makefile.tarfloppy instead of local code to build floppies
- use .WAIT in the top-level Makefile appropriately
- install inst.fs directly from ramdisk/Makefile rather than providing
separate inst/Makefile

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

Pull common files into newly created ramdisk-common directory.

Reduce ramdisk size by using hacked commands in distrib/utils.

branches: 1.11.2;
Need /etc/netconfig.

Add memswitch(8).
Remove update(8).

branches: 1.9.4;
Fix listfiles to handle object directories. Patches supplied by
Izumi Tsutsui in PR misc/7628.

G/c of the deleted programs.

Size hacks.
Use libhack, x_route, x_ifconfig, init_s in the distrib/utils
to reduce the ramdisk size.

branches: 1.6.2;
Add pax. Remove tar.

Mostly imported from netbsd-1-3 branch (1.3.3 and 1.3.4)
- Set ${driveunits} correctly.
- swapon on small memory machines.

There is no installboot for x68k port.

Use MI versions of the dot.commonutils and dot.instutils helper
scripts for ramdisk-based script installer (even where commented out).

They won't work :-p

branches: 1.1.2;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Ten identical list.inet6 files, or one common/list.inet6?
Not a difficult choice.

branches: 1.2.20;
Fix path of ping6 and rtsol.
lukem fixed the i386 one in July.
Fixes PR/32240

branches: 1.1.2;
Only use ping6 and rtsol if ${USE_INET6} != "no".
Part of PR 28994.

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

Remove /kern, which is not any longer needed.

branches: 1.1.12;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

Reduce ramdisk size by using hacked commands in distrib/utils.

branches: 1.8.4;
Add memswitch(8).
Remove update(8).

Make it be compiled again.

branches: 1.6.4;
Size hacks.
Use libhack, x_route, x_ifconfig, init_s in the distrib/utils
to reduce the ramdisk size.

branches: 1.5.2;
Mostly imported from netbsd-1-3 branch (1.3.3 and 1.3.4)
- Set ${driveunits} correctly.
- swapon on small memory machines.

Use pax instead of tar on the ramdisk bins.. create appropriate link for
tar to get tar-like fonctionality.

Remove strings(1) (temporary?) since it is no longer in
src/usr.bin and the GNU version seems too large for floppies.
Use single-user only init(8), which saves ramdisk capacity
and a key stroke.

They won't work :-p

branches: 1.1.2;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Move sun2, sun3 & x68k across to the common distrib etc/services, and
while here reduce it from 1180 to 794 bytes (whitespace & comment cleanup)

branches: 1.1.34;
- reorganise to be more consistent with other distrib/* directories
(no need for a "common" subdir which contains stuff only really
referenced by one other directory)
- use Makefile.tarfloppy instead of local code to build floppies
- use .WAIT in the top-level Makefile appropriately
- install inst.fs directly from ramdisk/Makefile rather than providing
separate inst/Makefile

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

branches: 1.2.10;
RCS Id Police.

Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

34 different termcap subsets, plus a couple of ports still using
the full termcap distfile. In an attempt to reduce the madness
switch everyone (except the i386 cd install which does its own
thing) to the same (under 8K) termcap subset:

ansi ansi/pc-term compatible with color
dumb|unknown 80-column dumb tty
hp300h HP Catseye console
iris-ansi-ap IRIS ANSI in application-keypad mode
iris-ansi|iris-ansi-net IRIS emulating 40 line ANSI terminal (almost VT100)
sun|sun1|sun2|sun-il Sun Microsystems Inc. console with working insert-line
vt100|vt100-am DEC VT100 (w/advanced video)
vt220-8 DEC VT220 8 bit terminal
vt220|vt200|vt300 DEC VT220 in vt100 emulation mode
wsvt25 NetBSD wscons in 25 line DEC VT220 mode
wsvt25m NetBSD wscons in 25 line DEC VT220 mode with Meta
x68k|x68k-ite NetBSD/x68k ITE
xterm|vs100 xterm terminal emulator (X Window System)

Trying to provide similar functionality across all ports? It'll never
catch on...

branches: 1.3.34;
- reorganise to be more consistent with other distrib/* directories
(no need for a "common" subdir which contains stuff only really
referenced by one other directory)
- use Makefile.tarfloppy instead of local code to build floppies
- use .WAIT in the top-level Makefile appropriately
- install inst.fs directly from ramdisk/Makefile rather than providing
separate inst/Makefile

Pull common files into newly created ramdisk-common directory.

branches: 1.1.12;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.

Reorganize (again) the installation system.
- Remove historical `script' installer, which was provided for
4MB RAM systems.
- Instead we provide `floppy-root' installer, which is composed
of 2 floppies just like the installation system used in the netbsd-1-2
days; one floppy contains (GENERIC) kernel and the other contains
the miniroot.
- The miniroots for both `ramdisk-root' installation system and
`floppy-root' installation system are identical.

Reduce ramdisk size by using hacked commands in distrib/utils.

branches: 1.10.2;
sweep of my licenses for consistency. (no functional changes) These
files have copyright held by people in addition to myself. (I did the
original work, they copied it, enhanced it, and added their copyright
to the derivative work.) Their approval has been given re: the license
change.

fix up NetBSD RCS Ids to match the standard, and the leading comment as
to match as well. No functional changes.

Forgotten part in 1.7.
Copy /sbin/fsck_ffs with /sbin/fsck.

Two changes.
- Now that fsck is only the wrapper for fsck_*, ffs upgrade options
should passed through with -T option. fsck_ffs is also required to
be copied with fsck.
- fsck_ffs may request large memory when the partition is big.
Configure swap device even when the RAM > 4MB.

swapon only if physmem <= 4MB.
swapon before fsck. This is needed if the connected disk is large.
Other message cosmetics.

SMALL kernel is not included in kern.tgz.

branches: 1.4.2;
Mostly imported from netbsd-1-3 branch (1.3.3 and 1.3.4)
- Set ${driveunits} correctly.
- swapon on small memory machines.

1) Remove all vestiges of tar from src/distrib. Use pax and appropriate
commandlines for all tar operations. (work supplied by Matt Green)
2) Update arch/*/md.c to deal with new sysinst/run.c. Special case
anything that needs to do a redirect or a pipe.
3) #if 0 some unused code in target.c. This code will need to be updated,
or special cased with do_system.

Big thank you to Matt for all his work on this.

They won't work :-p

branches: 1.1.2;
Initial commit of installer use ramdisk image.
lifted from i386, modified for x68k by me.