switch over to unified MAKEDEV

reassing majors for crypto and pf to use the newly defined MI major range

Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.

add isdn telephony dialout devices

Correctly fix pty majors

pty (pts) is major 4, not 6

Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

Add nsmb support.

fix ugen issue from latest shell changes that treat numeric constants
differently depending on their prefix.

Add wsfont support. Addresses PR#18388.

Add ksyms to "std" devices.

Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.

make ipl consistently "IP Filter"

Sync vnd descriptions to one wording.

Add the radio(4) driver to NetBSD/alpha

whitespace consistency cleanup

Include cgd on the list of things to be mknod(8)ed on all arches.

- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)

Add the kttcp device.

add bktr

By default, make ugen0 in the usbs target too, as i386 and x86_64 already did.

Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.

Add device creation support for systrace.

branches: 1.95.2;
Rename ISDN devices, per discussion on tech-kern. The network devices
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).

Move `stic*' before `st*' to avoid a false match.

Remove trailing semicolons from lines that don't need them.
TABify many lines.

various cleanups inspired by etc.i386/MAKEDEV:

* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"

* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent

* when making directories, don't use -p and don't redirect stdout to /dev/null

* clean up whitespace

* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)

* don't barf when we have fdesc mounted; just skip the devices fdesc provides


(these files should really be automagically generated...)

Use a tab instead of 7 spaces.

Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.

- Make stic0 as part of wscons.
- Remove wsmouse0/wskbd0 from all, since it already calls MAKEDEV wscons.

Create the ulpt devices that don't reset the printer on open.
(I don't get this, I could have sworn I committed these files a while ago.)

Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.

Add support for many more (930 or 992) ptys than the current 256.

Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.

This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.

Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.

Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.

Added clockctl

fix a couple of spelling mistakes in the i4b* descriptions

Standardize ch* and uk* descriptions.

Standardize scsibus* description.

Make more USB controller devices. You can easily have 6 these days.

Create wsmuxN and wsmuxctlN together.
Use separate nodes for wsmouse and wskbd.

Allow creation of wsmuxctl devices.

Create stic devices.

Make pci and agp device nodes.

Create dtyC* devices, as well.

Add an entry to make wsmux devices.

Follow up with style commit to put the isdn nodes in major number order.

First do minimal commit to correct botch in isdn major numbers.

Add ALTQ control devices.

Make mlx0 as part of all.

Add a driver for the Mylex DAC960 family (including DEC SWXCR).

Group isdn devices, so "sh MAKEDEV isdn" will create them all.
Add apropriate entries to the archs that already have isdn support
enabled in their cdev array.

Add MAKEDEV support for Cyclom-Y multiport serial boards. Driver
support was already in $MACHINE/$MACHINE/conf.c.

lsu -> ld, by popular request.

ca -> lsu

Get the major no right for uscanner.

Prepare for USB scanners, and add Rio 500 support while messing.

Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
"minimal" targets to use 16 PTYs.

branches: 1.60.2;
Add Cyclades-Z nodes.

branches: 1.59.2;
Make ca* devices.

Make /dev/usb, a node where USB events can be read.
Also add ttyU to hpcmips.

Fix raidN device creation.

- rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
- now raw partitions are used for memory disk ioctls

add SES device

Correct md* entries.

oops, wsmouse had same bad perms as wskbd

Don't set wskbd* devices to 666, use 600 like every other arch, to
prevent random users remapping your console keyboard.

Back out previous

Final chown user.group -> chown user:group changes.

branches: 1.49.2;
Tidy up comments a bit, to make the manpages generated from the a bit
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.

Add a comment about ttyU*.

Define the callunit variable for ttyU*.

Make creation of wsmux devices a little less confusing.

Rename umodem to ttyU. If it walks like a tty and quacks like a tty
it's a tty.

Add umodem device.

Make wsmux devices.

Support a second tape and cd drive on installation ramdisks.

+ttyEcfg

typo

under "minimal" correct a tyop: wsbkd0 -> wskbd0

branches: 1.38.2;
build audio[0123] links.

Add MIDI and sequencer devices. They seem to work, even.

kbd -> wskbd, mouse -> wsmouse

On platforms that have GENERIC kernels containing 'bpfilter 8' or greater,
create at least eight bpf dev entries. (All except atari).

Add ugen device.

Add USB devices.

Added RAID devices for everyone!

Add /dev/scsibus* device nodes.

s/kdb/kbd/ in the `MAKEDEV minimal' target.

Add the "speaker" device.

Fixes PR #3858: /dev/fd uniformly updated in MAKEDEV to make directory
(and file nodes) owned by root.wheel, and /dev/fd directory mode 755. Now
it matches mtree (and the rest of the system's permissions/owner layout).

add appropriate entry to make "random" as documented in rnd(4).
add "random" entry to "all".

Add a minimal set of devices for install disks, etc.

Ooops. It's blk=2,chr=12, not the other way around.

branches: 1.24.2;
ttyv* shouldn't be treated specially on the alpha (it's an i386-ism)

remove enss* before we try & mknod it

* use $((...)) not `expr ...`
* st* has perms 660 not 640
* use $0 not MAKEDEV
* add enss* to ss*
* remove superfluous use of umask
* ensure umask is reset after running MAKEDEV.local

Create /dev/audioctl and allow creation of multiple audio devices.

Make MAKEDEV and MAKEDEV.local mutually consistant. Reported in
pr #2596 by Tatoku Ogaito, but my fix is different from his.
This is purely an aesthetic change.

Make all tty??/pty?? pairs that can be opened by openpty().
Remove use of awk for generating names.
Make all consistent as possible.
Closes PR 3420.

Make all MAKEDEVs make fd/* similar. No need for awk or expr.
Inspired by PR 3420. Some MAKEDEVS had the fd separated out
of std and fd added to std.

Satellite receiver driver for ISA cards from PlanetConnect by Jason and
Herb for Canada Connect Corp.

Added a new device entry for ipfilter: /dev/ipauth

Add ipnat and ipstate at the appropriate minor numbers off the ipfilter
device.

clean up slightly, add wd and fd (even though they don't have drivers in
the kernel yet).

add 'ipl' device node entry, for ip-filter.

Device rename: `rd' => `md'

slight clean up of that last (fix some major numbers)

sync with conf.c: kill mmclock; add rd, audio, ss, and uk.

{,r}cd0c's minor number was wrong; fix. Make all device nodes for
'cd', just like for 'sd', 'vnd', and 'ccd'.

branches: 1.8.4;
add handling of lpt/lpa (interruptless) parallel printer port device
nodes (character, major 31). when making 'all', make lpa0 and lpt0.

add a way to build kbd and mouse devices

add device node for "mmclock," a high-resolution memory-mapped clock
pseudo-device.

Add entries for the ccd.

oops; ttyE* are major number 25

rename SCC tty devices from tty0? to ttyB?. add entries for ttyC?
(AlphaStation ns16550 "com" ports), and ttyE? (Workstation console
(framebuffer & keyboard) emulators).

kill a redundant Id tag

alpha etc files

MAKEDEV: New `virtio' target for all virtio-related devices.

We can use this to add more as they come up so we don't have to keep
tweaking every etc.${MACHINE}/MAKEDEV.conf every time. Currently
this makes nodes for viocon(4) and vio9p(4).

(Not all GENERIC kernels enable vio9p(4) but I suspect the ones that
don't really should; for those that are disabled because PAGE_SIZE !=
4096, I expect it's just a matter of some additional indexing to make
vio9p(4) work with other page sizes.)

PR kern/59211: vio9p(4): missing from various GENERICs and MAKEDEVs

branches: 1.15.4;
viocon(4): New virtio tty driver imported from OpenBSD.

viocon* at virtio?

/dev/ttyVI??

Tested under qemu with:

qemu-system-aarch64 ... \
-device virtio-serial \
-chardev socket,path=/tmp/ttyVI00,server=on,wait=off,id=ttyVI00 \
-device virtconsole,chardev=ttyVI00,name=org.NetBSD.dev.ttyVI00 \
...

I updated MAKEDEV.conf to create /dev/ttyVI?? on all ports where it
looks likely to work based on:
(a) having pci or a non-pci virtio attachment,
(b) `qemu-system-$ARCH -M ?' mentioned something resembling the port,
and
(c) `qemu-system-$ARCH -device virtio-serial' launched without
complaining about the virtio-serial device.

(Criterion (c) excluded sparc and sparc64.)

remove nsmb from MD list of devices to create for 'all'

Remove the satlink driver. It was disabled everywhere, had no man page and
no use either. Spotted by thorpej in PR/21345, ok christos.

Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.

This retires a big user of the mbuf API, and will ease maintenance of the
kernel.

branches: 1.11.24; 1.11.26;
Add raid disk nodes for the install images

Create a bpf(4) device node on ramdisk for DHCP client.

Add sysmon (required for the envsys framework).

branches: 1.8.2; 1.8.8;
Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl. There are
also a few instances of slightly different changes in the
case patterns.

Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.

See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html

Fixes PR 26511 properly.

OK'd by wrstuden@

branches: 1.6.10;
Add a few logical disks (ld[0-3]) to the minimal configuration so installation
can be done to Mylex DAC960 raid drives.

branches: 1.5.2;
Rework MAKEDEV:

* Use "mknod -F netbsd -r" to create nodes, instead of
"rm ; mknod; chmod; chown".
This means permissions & ownership of existing nodes will
not be changed.
This is up to 30% faster when populating an empty /dev,
and nearly 2x faster when re-running on an existing /dev.

* New options:
-f force change of permission & ownership of existing
devices
-m mknod override name/path of mknod program
(which defaults to $TOOL_MKNOD, then "mknod").
-s generate mtree(8) specfile instead of creating devices

* Remove /usr/etc from $PATH; not needed anymore.

* Provide functions to create devices & directories:
mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
create device node `name' with the appropriate permissions
lndev src target
create a symlink from src to target
makedir dir mode
create directory with appropriate mode

* UIDs and GIDs are hardcoded in at MAKEDEV generation time.
(Unfortunately there's not a simple way of determining a GID
a la "id -n user" for determining a UID).

This was tested by generating MAKEDEV for each MACHINE,MACHINE_ARCH
combination and comparing the results of "MAKEDEV all" from the
previous version to the new one.
(This testing actually highlighted mistakes in the previous configuration!)


Simplify distrib/common/Makefile.makedev to use "MAKEDEV -s"

add stic0 to 'all' (used to be created in alpha 'wscons' target)

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

target 'audio' creates /dev/audio0-3, g/c the duplicit entries creating
the files again

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Provide a binary/kernel/netbsd-GENERIC.QEMU.gz in the Alpha release
hierarchy. This is identical to netbsd-GENERIC, except it has been
dbsym'd so that the kernel symbols are available when running under
Qemu (which loads the kernel directly, but does not load the symbol
table).

branches: 1.10.2;
GENERIC.MP is no more. GENERIC defaults to MULTIPROCESSOR now.

don't create an empty installation/misc directory in the release tree.

branches: 1.8.18; 1.8.58;
Add a comment reminding to update the release notes if the list of
kernels change.

consistency tweaks

- add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate

add GENERIC.MP to KERNEL_SETS on architectures with MP support

remove unused installation/tapeimage

Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#

Add Makefile snippets to install netboot in installation/netboot
under ``make release''.

branches: 1.1.8; 1.1.10;
* Define INSTALLATION_DIRS and BUILD_KERNELS.
* Build in src/distrib
* Call the new release targets in src/distrib/{alpha,notes}

Note: The notes installation command is MI and should eventually move
to somewhere in ../Makefile

use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them

Back out last change because we now have a special disktab for the
FFS regression test.

Add missing "floppy288" entry required for FFS regression test.

oops

add in rz28 and rz29 disks

Make partition a of the 3.5" floppy label a 4.2BSD filesystem, rather
than unknown. (This now matches the i386.)

branches: 1.4.2;
fix bogon in the ImageDisk entry, add an entry for 3.5" floppies (useful
for making floppy images w/vnd).

add a couple more useful entries

shrink root and swap partitions by 15M each, and grow usr partition to match.

alpha etc files

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

RCS Id Police.

ufs -> ffs; PR #1381

alpha etc files

Switch default console tty from /dev/console to /dev/constty

With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.

The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off

Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)

As discussed on current-users

branches: 1.12.34; 1.12.36;
Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.

branches: 1.11.18; 1.11.20;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.10.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.

Thanks to Matthew Green for pointing out the need.

branches: 1.5.8;
Set console and ttyE? term types to vt100.

branches: 1.4.8;
add a ttyE1 line

Use "std.9600" instead of "Pc" for the line type.
rename SCC tty devices from tty0? to ttyB?. add entries for ttyC?
(AlphaStation ns16550 "com" ports), and ttyE? (Workstation console
(framebuffer & keyboard) emulators).

start a getty on console, even though it's not clear that that's correct.

alpha etc files