| History log of /src/etc/etc.cesfic |
| Revision | Date | Author | Comments |
| 1.13 | 24-Oct-2003 |
jdolecek | switch over to unified MAKEDEV
|
| 1.12 | 10-Oct-2003 |
jdolecek | reassing majors for crypto and pf to use the newly defined MI major range
|
| 1.11 | 03-Oct-2003 |
dsl | Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
|
| 1.10 | 05-Sep-2003 |
dsl | Put back port specific majors for ptys
|
| 1.9 | 30-Aug-2003 |
dsl | Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
|
| 1.8 | 22-Aug-2003 |
itojun | create /dev/crypto
|
| 1.7 | 27-Jul-2003 |
itojun | reserve cdev major # for PF. ok'ed by technical-exec
|
| 1.6 | 27-Apr-2003 |
ragge | Add ksyms to "std" devices.
|
| 1.5 | 17-Apr-2003 |
fvdl | Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
|
| 1.4 | 21-Oct-2002 |
lukem | whitespace consistency cleanup
|
| 1.3 | 09-Aug-2002 |
lukem | - in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
|
| 1.2 | 18-Jun-2002 |
wiz | Add comments so that the autogenerated MAKEDEV(8) has some contents.
|
| 1.1 | 17-Jun-2002 |
drochner | make the port more complete
|
| 1.2 | 19-Oct-2003 |
jdolecek | determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf
change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
|
| 1.1 | 15-Oct-2003 |
jdolecek | MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
|
| 1.1 | 02-Jan-2011 |
tsutsui | Make sure to build GENERIC kernel on release build.
This means there is no kernel binary in past releases. Oh well...
|
| 1.2 | 19-Dec-2002 |
jdolecek | use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries
the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them
|
| 1.1 | 17-Jun-2002 |
drochner | make the port more complete
|
| 1.6 | 25-Sep-2019 |
abs | Switch default console tty from /dev/console to /dev/constty
With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.
The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off
Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)
As discussed on current-users
|
| 1.5 | 07-Oct-2008 |
abs | branches: 1.5.62; 1.5.64;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion
|
| 1.4 | 20-Jun-2004 |
christos | branches: 1.4.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.
|
| 1.3 | 04-Oct-2003 |
dsl | Revert 'console' back to /dev/console (from /dev/constty)
|
| 1.2 | 03-Oct-2003 |
dsl | Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.
|
| 1.1 | 17-Jun-2002 |
drochner | make the port more complete
|
| 1.4.26.1 | 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.5.64.1 | 28-Oct-2019 |
martin | Pull up following revision(s) (requested by abs in ticket #384):
etc/etc.evbmips/ttys: revision 1.7
etc/etc.sparc64/ttys: revision 1.12
etc/etc.shark/ttys: revision 1.9
etc/etc.amiga/ttys: revision 1.25
etc/etc.arc/ttys: revision 1.9
etc/etc.sbmips/ttys: revision 1.6
etc/etc.landisk/ttys: revision 1.4
etc/etc.alpha/ttys: revision 1.13
etc/etc.amigappc/ttys: revision 1.4
etc/etc.mmeye/ttys: revision 1.8
etc/etc.ia64/ttys: revision 1.2
etc/etc.sandpoint/ttys: revision 1.8
etc/etc.hp300/ttys: revision 1.17
etc/etc.riscv/ttys: revision 1.2
etc/etc.i386/ttys: revision 1.21
etc/etc.aarch64/ttys: revision 1.2
etc/etc.algor/ttys: revision 1.6
etc/etc.sparc/ttys: revision 1.17
etc/etc.mipsco/ttys: revision 1.7
etc/etc.luna68k/ttys: revision 1.9
etc/etc.iyonix/ttys: revision 1.5
etc/etc.evbcf/ttys: revision 1.3
etc/etc.netwinder/ttys: revision 1.9
etc/etc.mvme68k/ttys: revision 1.10
etc/etc.evbarm/ttys: revision 1.8
etc/etc.evbsh3/ttys: revision 1.7
etc/etc.pmax/ttys: revision 1.16
etc/etc.hpcmips/ttys: revision 1.12
etc/etc.vax/ttys: revision 1.10
etc/etc.news68k/ttys: revision 1.10
etc/etc.mvmeppc/ttys: revision 1.7
etc/etc.hppa/ttys: revision 1.2
etc/etc.next68k/ttys: revision 1.11
etc/etc.ews4800mips/ttys: revision 1.3
etc/etc.epoc32/ttys: revision 1.2
etc/etc.emips/ttys: revision 1.2
etc/etc.evbppc/ttys: revision 1.7
etc/etc.sgimips/ttys: revision 1.11
etc/etc.or1k/ttys: revision 1.2
etc/etc.cesfic/ttys: revision 1.6
etc/etc.amd64/ttys: revision 1.7
etc/etc.playstation2/ttys: revision 1.7
etc/etc.zaurus/ttys: revision 1.4
etc/etc.newsmips/ttys: revision 1.10
Switch default console tty from /dev/console to /dev/constty
With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.
The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off
Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)
As discussed on current-users
|
| 1.5.62.1 | 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
