switch over to unified MAKEDEV

reassing majors for crypto and pf to use the newly defined MI major range

remove 'cbq' from the list of supported special devices

Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.

Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)

create /dev/crypto

reserve cdev major # for PF. ok'ed by technical-exec

Removed references to devices and special targets not actually supported.

Remove device nodes for obsolete olms and omms drivers.
Except for i386, the driver never existed for that port anyway...

Add ksyms to "std" devices.

Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.

make ipl consistently "IP Filter"

Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.

Make gdrom device on ramdisk.

Unification: "Maple Bus", "Maple" -> "Maple bus"

Add maple devices to comment.

Add mmem* and mlcd*.
Fix some disk assumed 8 partitions (actually 16).

don't bother creating /dev/io on archs which don't support it

whitespace consistency cleanup

Include cgd on the list of things to be mknod(8)ed on all arches.

- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)

Fix cd and md entries since RAW_PART is 2 on sh3 ports.

Add comments for ws* devices.
Please, don't forget to add comment lines when adding/enabling device
nodes.

- remove redundant wscons devices in target "all"
- add wsmux devices
- make correct md devices

Sync "sh $0.local all" lines.

Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.

no apm support

Add device creation support for systrace.

type miss of i partition: 9->8

increase partition to 16.

branches: 1.15.2;
Remove /dev/pms0 creation from ports that do not have the driver;
obsolete it on the ones that had it in the 'all' target.

Remove trailing semicolons from lines that don't need them.
TABify many lines.

various cleanups inspired by etc.i386/MAKEDEV:

* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"

* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent

* when making directories, don't use -p and don't redirect stdout to /dev/null

* clean up whitespace

* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)

* don't barf when we have fdesc mounted; just skip the devices fdesc provides


(these files should really be automagically generated...)

Use a tab instead of 7 spaces.

Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.

Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.

Add support for many more (930 or 992) ptys than the current 256.

Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.

This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.

Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.

Added clockctl

Remove descriptions for ss*, uk*, and ch*, which actually have no rules.

Add comment about how to generate MAKEDEV.8, and remove empty call units
section in comment (since MAKEDEV2manpage.pl expects at least one entry
per section).

Added target to make maple direct access device nodes.

Bugfixes.

Added entries for GDROM, SCI(F) and WSCONS. Also removed ttyv*.

Initial import of port "dreamcast" (cloned from port "evbsh3").

For ramdisk image, generate only 2 pairs of pty devices, instead of 16,
in order to save space further.

Create wd0 and wd1 device node for G1IDE kernel.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

branches: 1.5.16;
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.

branches: 1.4.18;
Move "makedev cfs" for the vcoda device from MI MAKEDEV.tmpl to
MD MAKEDEV.conf. Not all ports have vcoda in their majors.foo files
and we shouldn't (re)assign major numbers on all ports before 5.0.

Should close PR port-sgimips/38962.

branches: 1.3.26; 1.3.30;
Only make bpf, not bpfN

determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf

change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly

MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl

Build a raw binary format GENERIC kernel and put it into distribution dir.
This would make it possible to create a bootable CD using root on gdrom
without toolchain (i.e. without whole src tree).

branches: 1.3.18;
Add a comment reminding to update the release notes if the list of
kernels change.

Make the release bits more complete for hpcsh & dreamcast.
Change sent by FUKAUMI Naoki in private e-mail, thanks.

seems like dreamcast distrib/ build needs GENERIC_MD kernel

use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries

the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them

Back out last change because we now have a special disktab for the
FFS regression test.

Add missing "floppy288" entry required for FFS regression test.

Initial import of port "dreamcast" (cloned from port "evbsh3").

Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.

Initial import of port "dreamcast" (cloned from port "evbsh3").

Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion

branches: 1.6.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.

- Turn off console login.
- Remove nonexistent tty00 and tty01.
- Add and enable ttyE0 and scif0.

Revert 'console' back to /dev/console (from /dev/constty)

Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.

Added ttyp[g-zA-Z] (bin/15594).

Initial import of port "dreamcast" (cloned from port "evbsh3").