| History log of /src/etc/etc.evbarm/Makefile.inc |
| Revision | | Date | Author | Comments |
| 1.136 |
| 22-Mar-2025 |
hgutch | Also generate hashes for files in gzimg directories.
At one point this should probably be unified at least a bit with the hash
generation of regular sets, so that there is a single place that defines
the types of hashes generated for sets and gzimg.
|
| 1.135 |
| 12-Jan-2025 |
jmmv | Explicitly enable X11 sets for evbarm images
Instead of passing -x to mkimage by default in etc.evbarm/Makefile.inc,
be explicit and pass the -x flag to all images via their MKI_OPTS.
This is to allow adding extra images that do _not_ want to pull in X11
because there is no way to tell mkimage to "revert" the inclusion of
those sets once they have already been requested.
This change follows the same style found in etc.evbppc, where __mkimage
does not include -x and every image definition (there is only one though)
explicitly passes this flag.
|
| 1.134 |
| 11-Jan-2025 |
jmmv | Inject TOOL_SED and TOOL_PWD_MKDB into mkimage
The configuration files used for mkimage might want to customize the passwd
database of the generated image (as is the case for an out-of-tree config
file I have) and passing in these tools helps to execute those modifications.
|
| 1.133 |
| 31-Dec-2024 |
jmmv | Avoid unnecessary evbarm image re-compression during build
|
| 1.132 |
| 29-Dec-2024 |
jmmv | Recognize MKPOSTFIX=no in mkimage
|
| 1.131 |
| 03-Nov-2022 |
skrll | Provide MI PMAP support on AARCH64
|
| 1.130 |
| 29-Oct-2022 |
jmcneill | Stop building TISDP2420.
|
| 1.129 |
| 29-Oct-2022 |
jmcneill | Remove commented out kernel configs
|
| 1.128 |
| 22-Aug-2022 |
brook | By default, do not install any bootable images.
The previous commit introduced the ability to install a set of
bootable images as a normal part of a release build. While this made
it easy to install bootable images, the contents of a release build
depend on whether or not U-Boot packages are installed in /usr/pkgsrc,
which is the default location searched by installboot(8).
This commit requires users to explicitly list the bootable images to
be installed, which by default is none (i.e., prior behavior).
|
| 1.127 |
| 21-Aug-2022 |
brook | Create bootable images in ${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/gzimg.
Release builds for arm platforms create compressed images in
${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/gzimg. However, in some
cases, e.g., armv7.img.gz, they are not bootable. Consequently, boot
blocks must be manually installed in the images, which is an extra
barrier for testing systems or adopting NetBSD. This has prompted
creation of external repositories, e.g., armbsd.org, to host a
collection of bootable images. However, this does not ease the burden
on developers compiling their own systems; for them, manual
installation of boot blocks is still required.
For arm platforms, etc/etc.evbarm/Makefile.inc contains the commands
used to create system images. Because installboot(8) can write boot
blocks directly to system images, a loop through possible boards can
create a series of bootable images during the normal build process.
In the case of many arm platforms, installboot(8) uses U-Boot boot
blocks, which are not part of the NetBSD source code. Developers can,
however, install as many U-Boot boot blocks as desired, either in the
default location of /usr/pkg/share/u-boot or in a set of directories
pointed to by the U-Boot search path, the INSTALLBOOT_UBOOT_PATHS
environment variable. For each board with an available boot block, a
board-specific bootable image will be created in
${RELEASEDIR}/${RELEASEMACHINEDIR}/binary/gzimg. If a boot block is
not available, which is the typical situation currently, no additional
image will be created.
This facility creates opportunities to build bootable images for any
number of boards within the scope of a standard release build.
However, that is not required and will not occur without the
intervention of installing U-Boot boot blocks prior to the build.
|
| 1.126 |
| 20-May-2022 |
rin | Build OPENBLOCKS_A6 kernel for evbarmv5-e[bl].
It works --- except for:
- mvsata(4) problems (already reported repeatedly)
- NFS root with mvgbe(4) is weird; the system eventually locks up
Yes, we need to fix them...
|
| 1.125 |
| 30-Aug-2021 |
rin | Build KUROBOX_PRO for evbarmv5eb.
Other marvell-based machines may also work, but not tested yet.
|
| 1.124 |
| 24-Jul-2021 |
jmcneill | aarch64: Restrict KERNEL_SUFFIXES to img only
|
| 1.123 |
| 27-May-2021 |
rin | Switch arm64.img to big-endian for aarch64eb, as libsa/efiboot support
bi-endian FFS/disklabel now.
Many thanks to mrg@ for working on this!!
|
| 1.122 |
| 01-Dec-2020 |
rin | branches: 1.122.2;
Build RPI and RPI2 kernels also for earmv6{,hf}eb.
|
| 1.121 |
| 02-Oct-2020 |
jmcneill | Build arm64.img for aarch64eb with a LE FFS, and include GENERIC64 in
release builds.
|
| 1.120 |
| 28-May-2020 |
jmcneill | Create a separate Arm64 image that uses MBR partitioning. Amlogic SoCs
require the bootloader to be installed on SD cards at LBA1 which makes
them incompatible with GPT images.
|
| 1.119 |
| 24-May-2020 |
jmcneill | Pass TOOL_GPT to mkimage
|
| 1.118 |
| 23-May-2020 |
rin | Fix typo in comment: IMX21_OLINUXINO --> IMX23_OLINUXINO
|
| 1.117 |
| 23-May-2020 |
jmcneill | Remove references to defunct arm and earm arches
|
| 1.116 |
| 22-May-2020 |
jmcneill | Only build GENERIC kernel for armv7 releases.
|
| 1.115 |
| 18-May-2020 |
jmcneill | Separate devicetree .dts -> .dtb building from kernel builds. They are now
part of a separate set, "dtb.tgz", and only built when MKDTB=yes. This
defaults to yes for earmv[67]* and aarch64, and no everywhere else.
|
| 1.114 |
| 03-Nov-2019 |
jmcneill | Remove commented out IGEPV2 entry
|
| 1.113 |
| 03-Nov-2019 |
jmcneill | Remove OVERO from build, and commented out N900 kernel config
|
| 1.112 |
| 31-Oct-2019 |
jmcneill | Remove BEAGLEBOARDXM from the build
|
| 1.111 |
| 30-Oct-2019 |
jmcneill | Revert previous for now.
|
| 1.110 |
| 30-Oct-2019 |
jmcneill | Remove IGEPV2 and OVERO kernels from build
|
| 1.109 |
| 30-Oct-2019 |
jmcneill | Remove BEAGLEBOARD kernel from list of kernels to build
|
| 1.108 |
| 28-Oct-2019 |
jmcneill | Unhook BEAGLEBONE kernel from the build
|
| 1.107 |
| 02-Jun-2019 |
thorpej | branches: 1.107.2;
Include armv4 for "earm", not just "earmv4".
|
| 1.106 |
| 18-May-2019 |
skrll | Switch the kernel7.img RaspberryPi kernel in the armv7 image to GENERIC
and thus reducing the number of kernels built in an evbarmv7 release.
|
| 1.105 |
| 31-Mar-2019 |
jmcneill | Remove SUNXI kernel config.
|
| 1.104 |
| 31-Mar-2019 |
jmcneill | Remove TEGRA kernel config.
|
| 1.103 |
| 30-Mar-2019 |
jmcneill | Remove redundant TARGET_ENDIANNESS check
|
| 1.102 |
| 30-Mar-2019 |
jmcneill | Include bootarm.efi with releases
|
| 1.101 |
| 20-Jan-2019 |
skrll | G/C VEXPRESS_A15
|
| 1.100 |
| 20-Jan-2019 |
skrll | Another kernel bites te dust.
Remove ODROID-C1 as it is now replaced by GENERIC. Thanks jmcneill.
|
| 1.99 |
| 05-Nov-2018 |
skrll | Match the right MACHINE_ARCHes for GENERIC.
|
| 1.98 |
| 04-Nov-2018 |
skrll | Only add GENERIC to earmv6 and earmv7 builds
|
| 1.97 |
| 01-Nov-2018 |
skrll | Add GENERIC to big-endian KERNEL_SETS
|
| 1.96 |
| 01-Nov-2018 |
skrll | Use the GENERIC kernel where possible in armv7.img and remove the old
kernels from the bulid for SUNXI and TEGRA.
While I'm here disable *_INSTALL kernel builds for boards supported by
armv7.img
|
| 1.95 |
| 21-Oct-2018 |
skrll | Sort
|
| 1.94 |
| 27-Aug-2018 |
jmcneill | Copy bootaa64.efi to releasedir
|
| 1.93 |
| 01-Apr-2018 |
ryo | branches: 1.93.2;
Add initial support for ARMv8 (AARCH64) (by nisimura@ and ryo@)
- sys/arch/evbarm64 is gone and integrated into sys/arch/evbarm. (by skrll@)
- add support fdt. evbarm/conf/GENERIC64 fdt (bcm2837,sunxi,tegra) based generic 64bit kernel config. (by skrll@, jmcneill@)
|
| 1.92 |
| 11-Dec-2017 |
jmcneill | branches: 1.92.2;
Add missing RPI FDT build goop, from nick.
|
| 1.91 |
| 30-Nov-2017 |
jmcneill | Unhook BPI, CUBIEBOARD, and CUBIETRUCK kernels from the build (use SUNXI kernel now)
|
| 1.90 |
| 20-Aug-2017 |
christos | Creating installation/ramdisk here does not work; it happens too late.
|
| 1.89 |
| 06-Jul-2017 |
jmcneill | Enable memory disk support in the TEGRA kernel and remove TEGRA_INSTALL.
|
| 1.88 |
| 06-Jul-2017 |
jmcneill | Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
files for SUNXI and TEGRA kernels on the MSDOS partition.
|
| 1.87 |
| 05-Jul-2017 |
jmcneill | Copy install ramdisk to releasedir. Provide both a raw ffs and
Legacy U-Boot version of it.
|
| 1.86 |
| 05-Jul-2017 |
jmcneill | Remove SUNXI_INSTALL kernel
|
| 1.85 |
| 02-Jul-2017 |
jmcneill | Replace HUMMINGBIRD_A31 with the SUNXI kernel.
|
| 1.84 |
| 20-Jun-2017 |
skrll | Don't try and build VEXPRESS_A15_INSTALL
|
| 1.83 |
| 20-Jun-2017 |
skrll | Replace ALLWINNER_A80 (it's never really worked) with VEXPRESS_A15.
Idea from jmcneill@
|
| 1.82 |
| 09-Jun-2017 |
ryo | add support for i.MX6UltraLite, and
ConnectCore for iMX6UL Starter Board.
|
| 1.81 |
| 07-Jan-2017 |
kiyohara | branches: 1.81.6;
Add CUBOX to v7 and v7hf.
|
| 1.80 |
| 17-May-2016 |
ryo | branches: 1.80.2;
Add initial support for Freescale i.MX7 SoC and
Atmark Techno Armadillo-IoT G3 boards.
Contributed by Internet Initiative Japan Inc.
|
| 1.79 |
| 13-Dec-2015 |
jmcneill | Remove JETSONTK1 and NYAN-BIG kernels, add a new unified kernel named TEGRA.
|
| 1.78 |
| 18-Jul-2015 |
matt | Build CUBOX-I kernels
|
| 1.77 |
| 15-Jul-2015 |
martin | Add a new endianes flag to mkimage and pass it on big endian arm builds.
From Rin Okuyama.
|
| 1.76 |
| 22-May-2015 |
jmcneill | define TOOL_MKUBOOTIMAGE for mkimage
|
| 1.75 |
| 15-May-2015 |
matt | More sorting.
|
| 1.74 |
| 15-May-2015 |
matt | alphabetize armv7 kernels
|
| 1.73 |
| 14-May-2015 |
jmcneill | hook JETSONTK1 kernel into build
|
| 1.72 |
| 09-Apr-2015 |
jmcneill | Rename beagleboard.img to armv7.img. The new image includes the same
kernels as beagleboard.img plus support for Raspberry Pi 2, ODROID-C1,
Cubieboard2, Cubietruck, Hummingbird A31, and Banana Pi.
|
| 1.71 |
| 16-Mar-2015 |
jmcneill | hook ODROID-C1 into build
|
| 1.70 |
| 06-Mar-2015 |
skrll | Add RPI2 to kernels build for both earmv[67].
Use the earmv6 built kernels to create an image that can be used on both
RPI and RPI2
|
| 1.69 |
| 26-Feb-2015 |
kiyohara | Add OVERO to v7 and v7hf.
|
| 1.68 |
| 27-Jan-2015 |
jmcneill | build INTEGRATOR_CP_INSTALL
|
| 1.67 |
| 14-Dec-2014 |
jmcneill | build ALLWINNER_A80 kernel
|
| 1.66 |
| 13-Oct-2014 |
jmcneill | add HUMMINGBIRD_A31 kernel
|
| 1.65 |
| 10-Sep-2014 |
matt | Add CUBIETRUCK
|
| 1.64 |
| 07-Sep-2014 |
skrll | Add BPI to the list of kernels to build.
|
| 1.63 |
| 25-Jul-2014 |
hkenken | branches: 1.63.2;
Initial commit of support for Kobo touch. (i.MX507 or i.MX508)
(http://www.kobo.com)
|
| 1.62 |
| 30-Mar-2014 |
matt | branches: 1.62.2;
Update list of kernels
|
| 1.61 |
| 07-Mar-2014 |
hkenken | modified NetWalker kernel config
* add ARM_HAS_VBAR, FPU_VFP etc.
|
| 1.60 |
| 01-Mar-2014 |
matt | Add BE version of cubieboard. Plus hf too. And hf for BCM5301X.
|
| 1.59 |
| 08-Sep-2013 |
matt | Add CUBIEBOARD
|
| 1.58 |
| 19-Aug-2013 |
jmcneill | Instead of trying to pass two kernels to beagleboard.conf, pass one and
derive the path to the second from the first.
|
| 1.57 |
| 17-Aug-2013 |
jmcneill | Try to pick up the right location for BEAGLEBONE and BEAGLEBOARD kernels.
|
| 1.56 |
| 07-Aug-2013 |
matt | fix another typo
|
| 1.55 |
| 07-Aug-2013 |
matt | Fix a typo
|
| 1.54 |
| 06-Aug-2013 |
matt | Need to separate BE MACHINE_ARCH so that armv7 can be excluded.
|
| 1.53 |
| 06-Aug-2013 |
matt | Simply and deal with all the various earm MACHINE_ARCH variants
|
| 1.52 |
| 16-Jun-2013 |
jakllsch | Use TOOL_GZIP in mkimage, and pass the TOOL_GZIP into it.
|
| 1.51 |
| 23-Mar-2013 |
he | Add KUROBOX_PRO as an EVBARM_BOARDS member.
|
| 1.50 |
| 21-Mar-2013 |
mlelstv | fix ALL_KERNELS handling
|
| 1.49 |
| 19-Mar-2013 |
garbled | Add a new installer image for Raspberry PI to evbarm
Includes the following major changes:
1) Add new configmenu item to sysinst to allow creation of users at
post-install time.
2) Add an sshramdisk type to evbarm, which is a ramdisk with sshd
enabled, allowing users to install on a headless PI by sshing to the
device with the account "sysinst" password "netbsd" to begin the
installation. (Note, neither the account, nor the ssh setup are copied to
the finalized installation image)
3) Change mkimage to build a boot-only image, without the root filesystems.
Much of the sshramdisk code could be reused on other ports easily.
|
| 1.48 |
| 17-Mar-2013 |
mlelstv | Handle ALL_KERNELS selection
|
| 1.47 |
| 21-Feb-2013 |
hans | Use HOST_SH to run scripts. Makes mkimage work on SunOS.
|
| 1.46 |
| 20-Feb-2013 |
skrll | Move INTEGRATOR_CP from EVBARM_BOARDS to KERNEL_SETS so an
INTEGRATOR_CP_INSTALL kernel isn't required.
|
| 1.45 |
| 19-Feb-2013 |
skrll | Add support for the ARM Integrator/CP from Sergio L�pez.
The code hasn't been tested on real hardware, but INTEGRATOR_CP config
is useful for QEMU which supports it.
|
| 1.44 |
| 13-Feb-2013 |
christos | Avoid //
|
| 1.43 |
| 10-Feb-2013 |
jmcneill | fix output filename for __mkimage macro
|
| 1.42 |
| 10-Feb-2013 |
jmcneill | fix rpi kernel path, defer image building until after release target is done
|
| 1.41 |
| 10-Feb-2013 |
christos | avoid dup kernel
|
| 1.40 |
| 10-Feb-2013 |
christos | add beagleboard
|
| 1.39 |
| 10-Feb-2013 |
christos | pass more tools down.
|
| 1.38 |
| 10-Feb-2013 |
christos | Follow a different approach to install the kernel and compress the image.
|
| 1.37 |
| 09-Feb-2013 |
christos | get the kernel from the release directory.
|
| 1.36 |
| 09-Feb-2013 |
christos | merge back changes I undid
|
| 1.35 |
| 09-Feb-2013 |
christos | hook image building for rpi.
|
| 1.34 |
| 06-Feb-2013 |
matt | build the armv5t, armv6 and armv7 kernels for earm but only the v6 and v7
for earmhf.
|
| 1.33 |
| 05-Feb-2013 |
matt | Add earmhf support
|
| 1.32 |
| 17-Sep-2012 |
msaitoh | - Add OPENRD.
- Compile BEAGLEBOARD_INSTALL.
|
| 1.31 |
| 01-Sep-2012 |
matt | branches: 1.31.2;
Add BCM5301X
|
| 1.30 |
| 06-Aug-2012 |
matt | Add earm/earmeb changes
|
| 1.29 |
| 03-Aug-2012 |
kiyohara | Add ub to KERNEL_SUFFIXES.
|
| 1.28 |
| 26-Jul-2012 |
skrll | Add RPI to KERNEL_SETS
|
| 1.27 |
| 14-Feb-2012 |
jakllsch | branches: 1.27.2;
Bump MV2120 SYMTAB_SPACE.
Add kernels variants for root on the primary partitions of "Drive 1".
Add MV2120 to evbarm release.
|
| 1.26 |
| 30-Jan-2012 |
nisimura | add the missing backslash.
|
| 1.25 |
| 30-Jan-2012 |
nisimura | Add FriendlyARM Mini2440 support.
- new code for Samsung S3C2440 SoC.
- update for other S3C2xx0.
This port was done by Paul Fleischer.
|
| 1.24 |
| 28-Nov-2011 |
sekiya | Enable SHEEVAPLUG for build.
|
| 1.23 |
| 30-Oct-2008 |
cliff | branches: 1.23.8; 1.23.18;
add GEMINI to EVBARM_BOARDS list
|
| 1.22 |
| 21-Oct-2008 |
matt | Build TISDP2420 kernels
|
| 1.21 |
| 24-Jul-2007 |
pavel | branches: 1.21.12; 1.21.18;
Add a comment reminding to update the release notes if the list of
kernels change.
|
| 1.20 |
| 09-Nov-2006 |
scw | Add CP3100 and CP3100_INSTALL to kernel/build sets.
|
| 1.19 |
| 18-Oct-2006 |
he | Add the GUMSTIX kernels now that the distrib setup tries to find
those kernels.
|
| 1.18 |
| 16-Apr-2006 |
nonaka | A port of NetBSD to the I-O DATA HDL-G "Giga LANDISK".
Please refer to following URL for this machine.
http://www.iodata.com/products/products.php?cat=HNP&sc=HDL&ts=2&tsc=14&sc=HDL&pId=HDL-G400U
|
| 1.17 |
| 28-Feb-2006 |
scw | Add NSLU2 to armeb KERNEL_SETS.
|
| 1.16 |
| 27-Feb-2005 |
bsh | add TWINTAIL.
SMDK2410/2800 now have install kernels.
CVS: ----------------------------------------------------------------------
CVS: CVSROOT cvs.NetBSD.org:/cvsroot
|
| 1.15 |
| 28-Dec-2004 |
joff | Add TS7200
|
| 1.14 |
| 17-Mar-2004 |
mycroft | Build a SMDK2410 kernel.
|
| 1.13 |
| 26-May-2003 |
thorpej | Don't build a big-endian image on platforms which don't run big-endian.
|
| 1.12 |
| 10-Apr-2003 |
thorpej | Build a selection of install kernels.
|
| 1.11 |
| 27-Jan-2003 |
thorpej | Add ADI_BRH, IXM1200, and SMDK2800 kernel sets.
|
| 1.10 |
| 02-Dec-2002 |
lukem | - add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate
|
| 1.9 |
| 02-May-2002 |
lukem | - consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform
|
| 1.8 |
| 13-Apr-2002 |
thorpej | Make an Npwr kernel set, and build the Npwr install kernel.
|
| 1.7 |
| 12-Apr-2002 |
thorpej | Add an installation/instkernel subdirectory to the release.
|
| 1.6 |
| 29-Mar-2002 |
thorpej | Add binary/gzimg to INSTALLATION_DIRS.
|
| 1.5 |
| 28-Mar-2002 |
thorpej | Add evbarm snapshot/release targets.
|
| 1.4 |
| 28-Mar-2002 |
thorpej | Add the IQ80321 kernel.
|
| 1.3 |
| 22-Feb-2002 |
thorpej | Add "bin" to the list of valid kernel suffixes.
|
| 1.2 |
| 30-Nov-2001 |
thorpej | Add KERNEL_SUFFIXES; it currently includes "srec".
|
| 1.1 |
| 29-Nov-2001 |
thorpej | Add release-building glue for NetBSD/evbarm. Currently we build
two kernel sets: one for INTEGRATOR, one for IQ80310.
|
| 1.21.18.2 |
| 24-Jul-2007 |
pavel | Add a comment reminding to update the release notes if the list of
kernels change.
|
| 1.21.18.1 |
| 24-Jul-2007 |
pavel | file Makefile.inc was added on branch matt-mips64 on 2007-07-24 10:49:25 +0000
|
| 1.21.12.1 |
| 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.23.18.3 |
| 22-May-2014 |
yamt | sync with head.
for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.
this commit was splitted into small chunks to avoid
a limitation of cvs. ("Protocol error: too many arguments")
|
| 1.23.18.2 |
| 30-Oct-2012 |
yamt | sync with head
|
| 1.23.18.1 |
| 17-Apr-2012 |
yamt | sync with head
|
| 1.23.8.2 |
| 15-Feb-2014 |
matt | Fix KERNEL_SETS
|
| 1.23.8.1 |
| 15-Feb-2014 |
matt | Deal with armv7{,eb} MACHINE_ARCH
|
| 1.27.2.1 |
| 09-Aug-2012 |
jdc | Pull up revisions:
src/sys/arch/evbarm/dev/plcomreg.h revisions 1.2,1.3,1.4
src/sys/arch/evbarm/conf/INTEGRATOR revision 1.65
src/sys/arch/evbarm/dev/plcom.c revisions 1.34,1.35,1.36,1.37,1.38,1.39,1.40
src/sys/arch/evbarm/ifpga/plcom_ifpga.c revisions 1.12,1.13,1.14
src/sys/arch/evbarm/dev/plcomvar.h revisions 1.9,1.10,1.11
src/sys/arch/evbarm/ifpga/plcom_ifpgavar.h revision 1.2
src/sys/arch/arm/arm/cpufunc.c revisions 1.105,1.108
src/sys/arch/arm/arm32/cpu.c revision 1.79
src/sys/arch/arm/include/armreg.h revisions 1.49,1.54
src/sys/arch/arm/arm32/pmap.c revision 1.229
src/sys/arch/arm/arm32/arm32_machdep.c revision 1.77
src/sys/arch/arm/include/cpu.h revision 1.64
src/sys/arch/arm/arm/cpufunc_asm_arm1136.S revision 1.3
src/sys/arch/arm/arm/cpufunc_asm_arm11x6.S revision 1.1
src/sys/arch/arm/conf/files.arm revision 1.106
src/sys/arch/arm/include/cpufunc.h revision 1.57
src/sys/dev/sdmmc/sdhc.c revisions 1.14,1.24
src/sys/dev/sdmmc/sdhcvar.h revisions 1.7,1.8
src/sys/arch/evbarm/ifpga/ifpgareg.h revision 1.4
src/sys/arch/evbarm/integrator/integrator_machdep.c revision 1.69
src/sys/arch/arm/broadcom/bcm2835_dma.c revision 1.1
src/sys/arch/arm/broadcom/bcm2835_emmc.c revision 1.1
src/sys/arch/arm/broadcom/bcm2835_intr.c revision 1.1
src/sys/arch/arm/broadcom/bcm2835_intr.h revision 1.1
src/sys/arch/arm/broadcom/bcm2835_obio.c revision 1.1
src/sys/arch/arm/broadcom/bcm2835_plcom.c revision 1.1
src/sys/arch/arm/broadcom/bcm2835_pm.c revision 1.1
src/sys/arch/arm/broadcom/bcm2835_pmvar.h revision 1.1
src/sys/arch/arm/broadcom/bcm2835_space.c revision 1.1
src/sys/arch/arm/broadcom/bcm2835_tmr.c revision 1.1
src/sys/arch/arm/broadcom/bcm2835reg.h revision 1.1
src/sys/arch/arm/broadcom/bcm2835var.h revision 1.1
src/sys/arch/arm/broadcom/bcm_amba.h revision 1.1
src/sys/arch/arm/broadcom/files.bcm2835 revision 1.1
src/sys/arch/evbarm/Makefile revision 1.9
src/sys/arch/evbarm/conf/RPI revision 1.1
src/sys/arch/evbarm/conf/files.rpi revision 1.1
src/sys/arch/evbarm/conf/mk.rpi revision 1.1
src/sys/arch/evbarm/conf/std.rpi revision 1.1
src/sys/arch/evbarm/rpi/genassym.cf revision 1.1
src/sys/arch/evbarm/rpi/rpi.h revision 1.1
src/sys/arch/evbarm/rpi/rpi_machdep.c revision 1.1
src/sys/arch/evbarm/rpi/rpi_start.S revision 1.1,1.2
src/etc/etc.evbarm/Makefile.inc revision 1.28
(requested by skrll in ticket #454).
don't mix #define<TAB> and #define<SPACE> in a file.
avoid warning with options PLCOM_DEBUG for INTEGRATOR.
Rename register values. No functional change - same code before and after.
Existing names are prefixed with PL01X_ where they're common between the
PL010 and the PL011. The PL010_/PL011_ prefixes are added where they're
found only on the respective chips.
Replace the simple_lock with a kmutex_t. Update the locking to match
com(4) in the few places it didn't already.
DOH. Replace a line that got accidently deleted in the last commit.
device_t/softc split
struct device * -> device_t
struct cfdata * -> cfdata_t
Add the 'Z' to the 1176 cpu product name.
ok matt@
Fix locking botch introduced in 1.36.
Fix a KASSERT. From/OK'ed by matt@
Fix racy softint dispatch that lead to KASSERT(si->si_active) in
softint_execute
Discussed with matt@. "Looks good to me"
Add the documented ARM11[37]6 Auxiliary control register defines.
Add support for the ARM1176JZS
Add a flag for the lack of LED_ON in HOST_CTL (ti omap3 doesn't do that).
Provide a method for attachments to specify capabilites.
Add support for the PL011 to plcom. Pull across a bunch of fixes from
com(4) while I'm here and do some other tidyup.
Tested on a RaspberryPi.
PL010 not tested.
Initial commit of support for the RaspberryPI (www.raspberrypi.org)
This is enough for serial console via the gpio header pins and to get to
multiuser.
A huge thank you to Matt Thomas for all his help.
Add RPI to KERNEL_SETS
Remove #if 0 code.
|
| 1.31.2.4 |
| 19-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
| 1.31.2.3 |
| 23-Jun-2013 |
tls | resync from head
|
| 1.31.2.2 |
| 25-Feb-2013 |
tls | resync with head
|
| 1.31.2.1 |
| 20-Nov-2012 |
tls | Resync to 2012-11-19 00:00:00 UTC
|
| 1.62.2.1 |
| 10-Aug-2014 |
tls | Rebase.
|
| 1.63.2.5 |
| 06-Aug-2015 |
snj | Pull up following revision(s) (requested by skrll in ticket #909):
distrib/sets/lists/etc/mi: revision 1.237
distrib/sets/lists/tests/mi: revision 1.613
distrib/utils/embedded/conf/armv7.conf: revisions 1.1, 1.2
distrib/utils/embedded/conf/beagleboard.conf: delete
distrib/utils/embedded/conf/evbarm.conf: revisions 1.21, 1.22
distrib/utils/embedded/conf/rpi.conf: revisions 1.28, 1.29
distrib/utils/embedded/conf/rpi_inst.conf: revisions 1.7, 1.8
distrib/utils/embedded/conf/usermode.conf: revision 1.5
distrib/utils/embedded/conf/x86.conf: revision 1.5
distrib/utils/embedded/files/resize_disklabel: revision 1.1
distrib/utils/embedded/mkimage: revisions 1.49, 1.55-1.59
etc/defaults/rc.conf: revision 1.133
etc/etc.evbarm/Makefile.inc: revisions 1.72, 1.76
etc/rc.d/Makefile: revision 1.93 via patch
etc/rc.d/resize_root: revisions 1.1-1.3
etc/rc.d/root: revision 1.5
sbin/resize_ffs/Makefile: revision 1.5
sbin/resize_ffs/resize_ffs.8: revisions 1.14-1.16
sbin/resize_ffs/resize_ffs.c: revisions 1.39-1.44
share/man/man5/rc.conf.5: revision 1.158, 1.159
tests/sbin/resize_ffs/Makefile: revision 1.4
tests/sbin/resize_ffs/common.sh: revision 1.14
tests/sbin/resize_ffs/t_check.sh: revision 1.1
tests/sbin/resize_ffs/t_grow.sh: revision 1.9
tests/sbin/resize_ffs/t_grow_swapped.sh: revision 1.3
tests/sbin/resize_ffs/t_shrink.sh: revision 1.8
tests/sbin/resize_ffs/t_shrink_swapped.sh: revision 1.2
fix image building:
- round up the total size of the disk image
- fix fdisk offset for netbsd ffs images
--
Make get_dev_size work on regular files too.
--
Use `!= -1' instead of `== 0' out of paranoia.
--
- Add -c to check to see if grow/shrink is required
- Divide by DEV_BSIZE when returning size of file.
- Update manpage
--
New sentence, new line. Sort option descriptions.
--
Add resize_root boot operation. If resize_root=YES in rc.conf then
the system attempts to resize the root file system to fill it's
partition prior to mounting read-write. Useful for things like AMI
file system images. May eventually be used by arm images after
coming up with similar solution for increasing the parition size.
--
- Add new tests for -c check flag in resize_ffs
--
Bump date for previous.
it's -> its
--
Handle case in grow() where last cylinder group is too small for ufs2.
Align with code in shrink().
--
factor out geometry calculation and use this also in CheckOnly mode.
be a bit more verbose in Verbose mode.
--
Add support for auto-growing the root partition. Enable it for rpi.img.
--
initialize resize before pulling in board config
--
add KEYWORD: interactive, honour resize_root_flags and
resize_root_postcmd rc vars
--
if the -p flag is specified, display a progress bar while growing the
file-system
--
show resize_ffs progress bar when resizing root partition
--
fix typo in previous; pass -y unconditionally to resize_ffs, not -p
--
Rename beagleboard.img to armv7.img. The new image includes the same
kernels as beagleboard.img plus support for Raspberry Pi 2, ODROID-C1,
Cubieboard2, Cubietruck, Hummingbird A31, and Banana Pi.
--
Properly spell X' name. From X(7):
The X.Org Foundation requests that the following names be
used when
referring to this software:
X
X Window System
X Version 11
X Window System, Version 11
X11
--
Add some documentation:
Tell what this does, and what it expects from conf files
--
Cleanup: make_filesystems is not used any longer, purge remains
--
More cleanup:
Instead of first overwriting the *_evbarm functions with own code,
and then calling them from the regular functions, directly put the
code into the regular functions.
No more functions from evbarm.conf are used now.
Some variables are still used!
--
define TOOL_MKUBOOTIMAGE for mkimage
--
fix mkubootimage
|
| 1.63.2.4 |
| 21-Mar-2015 |
snj | Pull up following revision(s) (requested by jmcneill in ticket #598):
sys/arch/arm/amlogic/amlogic_board.c: up to revision 1.9
sys/arch/arm/amlogic/amlogic_canvasreg.h: revision 1.1
sys/arch/arm/amlogic/amlogic_com.c: up to revision 1.4
sys/arch/arm/amlogic/amlogic_comreg.h: up to revision 1.3
sys/arch/arm/amlogic/amlogic_comvar.h: revision 1.1
sys/arch/arm/amlogic/amlogic_cpufreq.c: up to revision 1.2
sys/arch/arm/amlogic/amlogic_crureg.h: up to revision 1.7
sys/arch/arm/amlogic/amlogic_dwctwo.c: up to revision 1.2
sys/arch/arm/amlogic/amlogic_genfb.c: revision 1.1
sys/arch/arm/amlogic/amlogic_gmac.c: up to revision 1.2
sys/arch/arm/amlogic/amlogic_hdmireg.h: revision 1.1
sys/arch/arm/amlogic/amlogic_intr.h: up to revision 1.5
sys/arch/arm/amlogic/amlogic_io.c: up to revision 1.7
sys/arch/arm/amlogic/amlogic_reg.h: up to revision 1.9
sys/arch/arm/amlogic/amlogic_rng.c: revision 1.1
sys/arch/arm/amlogic/amlogic_sdhc.c: up to revision 1.3
sys/arch/arm/amlogic/amlogic_sdhcreg.h: revision 1.1
sys/arch/arm/amlogic/amlogic_space.c: revision 1.1
sys/arch/arm/amlogic/amlogic_var.h: up to revision 1.8
sys/arch/arm/amlogic/amlogic_vpureg.h: revision 1.1
sys/arch/arm/arm/bootconfig.c: revisions 1.7-1.8
sys/arch/arm/conf/files.arm: revision 1.129
sys/arch/arm/cortex/pl310.c: revisions 1.16-1.17
sys/arch/arm/cortex/a9_mpsubr.S: revisions 1.25-1.29
sys/arch/arm/cortex/a9tmr.c: revisions 1.8-1.12
sys/arch/arm/cortex/a9tmr_var.h: revision 1.4
sys/arch/arm/cortex/a9wdt.c: revisions 1.3-1.4
sys/arch/arm/cortex/armperiph.c: revisions 1.5-1.7
sys/arch/arm/arm/cpufunc.c: revision 1.151
sys/arch/arm/include/bootconfig.h: revision 1.7
sys/arch/arm/include/locore.h: revision 1.19
sys/arch/evbarm/amlogic/amlogic_machdep.c: up to revision 1.17
sys/arch/evbarm/amlogic/amlogic_start.S: up to revision 1.2
sys/arch/evbarm/amlogic/genassym.cf: revision 1.1
sys/arch/evbarm/amlogic/platform.h: revision 1.1
sys/arch/evbarm/conf/files.amlogic: up to revision 1.8
sys/arch/evbarm/conf/std.amlogic: up to revision 1.2
sys/arch/evbarm/conf/mk.amlogic: revision 1.1
sys/arch/evbarm/conf/ODROID-C1: up to revision 1.12
sys/arch/evarm/conf/ODROID-C1_INSTALL: revision 1.1
Don't use not as a variable since it's reserved in C++.
--
clean the a9 l2 cache before turning it on.
--
Add Cortex-A17 support
--
Fix CORTEXA17 support
--
Let the "cbar" device property override the cbar value, to work around
broken bootloaders
--
add a helper to update a9tmr frequency
--
detach and re-attach timecounter when updating freq, and reinit timer on
each cpu
--
fix typo
--
add BOOTOPT_TYPE_MACADDR for parsing mac address parameters
--
make sure we set ACTLR.SMP=1 for CPU_CORTEXA5 in !MP case, ok matt@
--
According to the Cortex-A5 TRM, the CBAR register is not implemented and
always reads as 0x00000000. Add ARM_CBAR option to set this in kernel
config.
--
skip a TLBIALL on Cortex-A5 that stops my odroid-c1 from booting, ok matt
--
match on Cortex-A5
--
match on Cortex-A5
--
allow arml2cc to be used on Cortex-A5 if the "offset" property is specified
--
print "A5" instead of "A9" at attach time if running on a Cortex-A5
--
Improve inline asm around dsb/dmb/isb:
- always use volatile and mark them as memory barrier
- use the common version from locore.h in all places not included from
userland
--
Work-in-progress Odroid-C1 support.
--
no need to override ARM_CBAR, remove unused COM_16750 option
--
Add basic serial console support.
--
add dwctwo and usb devices
--
ODROID-C1 SMP support.
--
auto-detect RAM size
--
ODROID-C1 onboard ethernet support.
--
add amlogicrng, add commented-out genfb placeholder
--
enable amlogicsdhc
--
add ODROID-C1 install kernel
--
Add CPUFREQ option to set boot CPU frequency. ODROID-C1 is advertised
as quad-core 1.5GHz but boots up at 1.2GHz; add CPUFREQ=1512 to config
and make sure to set the correct speed before attaching CPUs.
The speed can still be scaled down with machdep.cpu sysctls.
--
disable DEBUG, LOCKDEBUG, VERBOSE_INIT_ARM
--
Basic framebuffer console support. Work in progress.
|
| 1.63.2.3 |
| 11-Mar-2015 |
snj | Pull up following revision(s) (requested by skrll in ticket #582):
distrib/utils/embedded/conf/rpi.conf: revision 1.27
etc/etc.evbarm/Makefile.inc: revision 1.70
sys/arch/arm/broadcom/bcm2835_intr.c: revision 1.5-1.7
sys/arch/arm/broadcom/bcm2835_obio.c: revision 1.23, 1.24
sys/arch/arm/broadcom/bcm2835_space.c: revision 1.8
sys/arch/arm/broadcom/bcm2835reg.h: revision 1.14
sys/arch/arm/broadcom/bcm2835var.h: revision 1.2
sys/arch/arm/broadcom/files.bcm2835: revision 1.24
sys/arch/arm/cortex/a9_mpsubr.S: revision 1.30
sys/arch/arm/cortex/armperiph.c: revision 1.8, 1.9
sys/arch/arm/cortex/gtmr.c: revision 1.9
sys/arch/arm/cortex/gtmr_var.h: revision 1.5
sys/arch/arm/cortex/mpcore_var.h: revision 1.3
sys/arch/arm/include/cpu.h: revision 1.84
sys/arch/evbarm/conf/RPI2: revision 1.1, 1.2
sys/arch/evbarm/conf/RPI2_INSTALL: revision 1.1
sys/arch/evbarm/conf/RPI: revision 1.59, 1.60
sys/arch/evbarm/conf/mk.rpi: revision 1.4
sys/arch/evbarm/conf/std.rpi: revisions 1.16-1.19 via patch
sys/arch/evbarm/rpi/genassym.cf: revision 1.2
sys/arch/evbarm/rpi/rpi.h: revision 1.4
sys/arch/evbarm/rpi/rpi2_start.S: revision 1.1
sys/arch/evbarm/rpi/rpi_machdep.c: revision 1.57, 1.58 via patch
sys/arch/evbarm/rpi/rpi_start.S: revision 1.13
Move some options into std.rpi
--
Add __HAVE_MM_MD_CACHE_ALIASING
Pull up following revision(s) (requested by skrll in ticket #582):
Fix TPIDRPRW_IS_CURLWP builds.
--
A MULTIPROCESSOR kernel requires TPIDRPRW_IS_CURCPU.
--
Use TPIDRPRW_IS_CURLWP as it's a slight code reduction and performance
improvement.
Initial RPI2 support - it doesn't work yet. The generic timer gets messed
up somehow.
This commit changes the KVA layout of the RPI.
--
Make this compile where gtmr isn't used.
--
Spin up the non-boot CPUs, but don't allow cpu_boot_secondary_processors
to see them for now.
RPI2 nows works well with only the boot cpu.
--
Appease a KASSERT - will be remove when MULTIPROCESSOR RPI2 is fixed.
--
Add RPI2 to kernels build for both earmv[67].
Use the earmv6 built kernels to create an image that can be used on both
RPI and RPI2
--
Add an RPI2_INSTALL
|
| 1.63.2.2 |
| 14-Nov-2014 |
martin | Pull up following revision(s) (requested by skrll in ticket #230):
sys/dev/i2c/axp22x.c: revision 1.1
etc/etc.evbarm/Makefile.inc: revisions 1.65-1.66
sys/arch/evbarm/conf/HUMMINGBIRD_A31: revisions 1.1-1.15
sys/arch/evbarm/conf/HUMMINGBIRD_A31_INSTALL: revisions 1.1-1.3
sys/dev/i2c/axp22x.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.57
Add Merrii Hummingbird A31 board kernels.
Add AXP22x Power Management Unit driver.
|
| 1.63.2.1 |
| 12-Nov-2014 |
martin | Pull up following revision(s) (requested by skrll in ticket #222):
etc/etc.evbarm/Makefile.inc 1.64
sys/arch/evbarm/conf/BPI 1.2,1.4,1.6-1.7,1.9
sys/arch/evbarm/conf/BPI_INSTALL 1.1
sys/arch/evbarm/conf/CUBIEBOARD 1.18-1.30
sys/arch/evbarm/conf/CUBIETRUCK 1.4,1.6
sys/arch/evbarm/conf/mk.awin 1.4
sys/arch/evbarm/conf/std.awin 1.4 (via patch)
sys/conf/files 1.1104
sys/dev/usb/motg.c 1.9-1.12
sys/dev/usb/motgreg.h 1.2-1.4
Allow attachment glue to override the number of endpoints
-
options MOTG_ALLWINNER to select the awin specific reg layout
options MOTG_ALLWINNER
-
Instead of polluting motgreg.h with AllWinner specific registers (things
were getting out of hand), move the AllWinner reg definitions to
arch/arm/allwinner/awin_otgreg.h and include that instead of
dev/usb/motgreg.h when MOTG_ALLWINNER is defined.
let the bus driver override fifo size
-
If the bus driver supplies a fifo size and dynfifo is true, use it
-
Various kernel config fixes.
|
| 1.80.2.1 |
| 20-Mar-2017 |
pgoyette | Sync with HEAD
|
| 1.81.6.3 |
| 25-Aug-2017 |
martin | branches: 1.81.6.3.2;
Pull up following revision(s) (requested by snj in ticket #211):
etc/etc.evbarm/Makefile.inc: revision 1.83
etc/etc.evbarm/Makefile.inc: revision 1.84
Replace ALLWINNER_A80 (it's never really worked) with VEXPRESS_A15.
Idea from jmcneill@
Don't try and build VEXPRESS_A15_INSTALL
|
| 1.81.6.2 |
| 20-Jul-2017 |
snj | Pull up following revision(s) (requested by jmcneill in ticket #146):
etc/etc.evbarm/Makefile.inc: revisions 1.85, 1.86
Replace HUMMINGBIRD_A31 with the SUNXI kernel.
--
Remove SUNXI_INSTALL kernel
|
| 1.81.6.1 |
| 18-Jul-2017 |
snj | Pull up following revision(s) (requested by jmcneill in ticket #114):
sys/arch/arm/samsung/exynos_intr.h: revision 1.3
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.2
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.3
sys/arch/arm/sunxi/sunxi_gates.c: revision 1.1
distrib/utils/embedded/mkimage: revision 1.66
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.4
sys/arch/arm/sunxi/sunxi_rsb.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.5
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.6
sys/arch/arm/sunxi/sun8i_h3_ccu.c: revision 1.7
sys/dev/gpio/gpio.c: revision 1.59
sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.1
sys/conf/Makefile.kern.inc: revision 1.257
sys/arch/evbarm/conf/ODROID-XU_INSTALL: file removal
sys/arch/arm/sunxi/sunxi_ccu_prediv.c: revision 1.2
sys/conf/Makefile.kern.inc: revision 1.258
sys/arch/arm/fdt/psci_fdt.h: revision 1.1
sys/arch/arm/sunxi/sunxi_resets.c: revision 1.1
sys/arch/evbarm/conf/files.sunxi: revision 1.1
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.8
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.9
sys/arch/arm/samsung/files.exynos: revision 1.22
distrib/utils/embedded/conf/armv7.conf: revision 1.13
sys/arch/arm/samsung/files.exynos: revision 1.23
sys/arch/evbarm/conf/std.tegra: revision 1.15
distrib/utils/embedded/conf/armv7.conf: revision 1.14
sys/arch/arm/samsung/files.exynos: revision 1.24
distrib/utils/embedded/conf/armv7.conf: revision 1.15
sys/arch/evbarm/sunxi/genassym.cf: revision 1.1
sys/arch/arm/samsung/exynos_fdt.c: file removal
sys/dev/fdt/fdt_pinctrl.c: revision 1.4
sys/arch/arm/samsung/exynos_sysmmu.c: revision 1.2
sys/arch/arm/sunxi/sun8i_h3_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_twi.c: revision 1.1
sys/dev/usb/ehci.c: revision 1.255
sys/arch/arm/sunxi/sunxi_twi.c: revision 1.2
sys/arch/arm/sunxi/sun8i_a83t_ccu.h: revision 1.1
sys/dev/ic/dwc_mmc.c: revision 1.11
sys/arch/arm/cortex/gic.c: revision 1.24
distrib/evbarm/instkernel/ramdisk/Makefile: revision 1.17
etc/etc.evbarm/Makefile.inc: revision 1.87
etc/etc.evbarm/Makefile.inc: revision 1.88
sys/arch/arm/fdt/gic_fdt.c: revision 1.5
etc/Makefile: revision 1.429
sys/arch/arm/fdt/gic_fdt.c: revision 1.6
sys/arch/arm/fdt/gic_fdt.c: revision 1.7
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.2
sys/arch/evbarm/conf/std.sunxi: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.3
sys/arch/evbarm/conf/std.sunxi: revision 1.2
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.4
sys/arch/evbarm/conf/std.sunxi: revision 1.3
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.5
sys/arch/arm/sunxi/sunxi_ccu_div.c: revision 1.1
sys/dev/gpio/gpiovar.h: revision 1.17
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.6
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.7
sys/arch/arm/sunxi/sunxi_gpio.c: revision 1.8
sys/arch/arm/sunxi/sunxi_rsb.h: revision 1.1
sys/arch/arm/samsung/exynos_i2c.c: revision 1.12
sys/dev/fdt/fdtvar.h: revision 1.21
sys/arch/evbarm/sunxi/sunxi_start.S: revision 1.1
sys/arch/arm/samsung/exynos_i2c.c: revision 1.13
sys/dev/fdt/fdtvar.h: revision 1.22
sys/arch/evbarm/conf/SUNXI: revision 1.10
sys/dev/fdt/fdtvar.h: revision 1.23
sys/arch/evbarm/conf/SUNXI: revision 1.11
sys/dev/fdt/gpioleds.c: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.24
sys/arch/evbarm/conf/SUNXI: revision 1.12
sys/arch/evbarm/conf/SUNXI: revision 1.13
sys/arch/arm/cortex/gic.c: revision 1.30
sys/arch/evbarm/conf/SUNXI: revision 1.14
sys/arch/evbarm/conf/SUNXI: revision 1.15
sys/arch/evbarm/conf/SUNXI: revision 1.16
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.1
etc/Makefile: revision 1.430
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.2
etc/Makefile: revision 1.431
sys/arch/evbarm/conf/VEXPRESS_A15: revision 1.17
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.3
sys/arch/arm/sunxi/sunxi_emac.c: revision 1.4
sys/arch/arm/samsung/exynos5422_clock.c: revision 1.6
sys/arch/arm/samsung/exynos_platform.c: revision 1.1
sys/dev/ofw/ofw_subr.c: revision 1.29
sys/arch/arm/samsung/exynos_platform.c: revision 1.2
sys/arch/evbarm/conf/mk.vexpress: revision 1.3
sys/arch/arm/samsung/exynos_platform.c: revision 1.3
sys/arch/evbarm/conf/mk.vexpress: revision 1.4
sys/arch/arm/samsung/exynos_platform.c: revision 1.4
sys/arch/arm/arm/psci.h: revision 1.1
sys/arch/arm/samsung/exynos_platform.c: revision 1.5
sys/arch/arm/samsung/exynos_platform.c: revision 1.6
sys/arch/evbarm/fdt/fdt_machdep.c: revision 1.10
external/bsd/mdocml/bin/mandoc/Makefile: revision 1.12
sys/dev/fdt/files.fdt: revision 1.17
sys/dev/fdt/files.fdt: revision 1.18
sys/dev/fdt/files.fdt: revision 1.19
sys/arch/arm/samsung/exynos_sscom.c: revision 1.8
sys/arch/arm/sunxi/sun8i_a83t_ccu.c: revision 1.1
sys/arch/arm/sunxi/sunxi_mmc.c: revision 1.1
sys/arch/arm/samsung/exynos_sscom.c: revision 1.9
sys/arch/arm/conf/files.arm: revision 1.133
sys/arch/arm/samsung/mct_var.h: revision 1.5
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.1
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.2
sys/arch/evbarm/conf/std.vexpress: revision 1.6
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.3
sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.1
sys/arch/arm/sunxi/sunxi_platform.c: revision 1.4
sys/arch/arm/sunxi/sun6i_a31_gpio.c: revision 1.2
sys/arch/arm/sunxi/files.sunxi: revision 1.1
sys/dev/ofw/ofw_subr.c: revision 1.30
sys/arch/arm/sunxi/files.sunxi: revision 1.2
sys/dev/ofw/openfirm.h: revision 1.35
sys/arch/arm/sunxi/files.sunxi: revision 1.3
sys/dev/ofw/openfirm.h: revision 1.36
sys/arch/arm/sunxi/files.sunxi: revision 1.4
sys/arch/arm/sunxi/files.sunxi: revision 1.5
sys/arch/evbarm/exynos/exynos_machdep.c: file removal
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.1
sys/arch/arm/samsung/sscom.c: revision 1.9
sys/arch/arm/sunxi/files.sunxi: revision 1.6
sys/dev/fdt/ohci_fdt.c: revision 1.1
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.1
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.2
sys/arch/arm/sunxi/files.sunxi: revision 1.7
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.2
sys/arch/arm/sunxi/sunxi_gpio.h: revision 1.3
sys/arch/arm/sunxi/files.sunxi: revision 1.8
sys/arch/arm/sunxi/sunxi_usbphy.c: revision 1.3
sys/arch/arm/sunxi/files.sunxi: revision 1.9
sys/arch/arm/samsung/exynos_sscom.c: revision 1.10
sys/arch/evbarm/conf/mk.tegra: revision 1.5
sys/arch/arm/samsung/exynos_dwcmmc.c: revision 1.4
sys/arch/evbarm/conf/mk.tegra: revision 1.6
sys/arch/evbarm/conf/EXYNOS: revision 1.15
sys/arch/evbarm/conf/EXYNOS: revision 1.16
sys/arch/evbarm/conf/EXYNOS: revision 1.17
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.1
sys/arch/evbarm/conf/EXYNOS: revision 1.19
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu.c: revision 1.5
sys/arch/arm/sunxi/sunxi_emac.h: revision 1.1
sys/arch/evbarm/conf/mk.sunxi: revision 1.1
sys/arch/evbarm/include/bootconfig.h: revision 1.7
sys/arch/evbarm/conf/TEGRA: revision 1.24
sys/arch/arm/arm/psci.c: revision 1.1
sys/dev/led.c: revision 1.1
sys/dev/led.c: revision 1.2
sys/arch/arm/arm/psci_arm.S: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_gate.c: revision 1.2
sys/dev/fdt/ehci_fdt.c: revision 1.1
sys/dev/fdt/ehci_fdt.c: revision 1.2
sys/arch/arm/sunxi/sun6i_a31_ccu.h: revision 1.1
sys/arch/evbarm/conf/EXYNOS: revision 1.21
sys/arch/arm/sunxi/files.sunxi: revision 1.10
sys/arch/arm/sunxi/files.sunxi: revision 1.11
sys/dev/fdt/fdtbus.c: revision 1.14
sys/arch/arm/sunxi/sunxi_mmc.h: revision 1.1
sys/arch/arm/samsung/exynos5422_dma.c: file removal
usr.bin/config/mkmakefile.c: revision 1.69
sys/conf/files: revision 1.1178
sys/arch/arm/sunxi/sunxi_platform.h: revision 1.1
sys/arch/evbarm/exynos/exynos_start.S: revision 1.4
sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.11
sys/arch/arm/samsung/exynos_pinctrl.c: revision 1.12
sys/arch/arm/sunxi/sunxi_rtc.c: revision 1.1
sys/arch/arm/sunxi/sun8i_h3_ccu.h: revision 1.1
sys/arch/arm/samsung/exynos5410_clock.c: revision 1.1
sys/arch/arm/samsung/exynos5410_clock.c: revision 1.2
sys/arch/evbarm/conf/SUNXI: revision 1.1
external/bsd/elftosb/usr.sbin/elftosb/Makefile: revision 1.5
sys/arch/evbarm/conf/SUNXI: revision 1.2
sys/arch/arm/fdt/psci_fdt.c: revision 1.1
sys/arch/evbarm/conf/SUNXI: revision 1.3
sys/arch/evbarm/conf/SUNXI: revision 1.4
sys/arch/evbarm/conf/files.exynos: revision 1.3
sys/arch/evbarm/conf/SUNXI: revision 1.5
sys/arch/evbarm/conf/SUNXI: revision 1.6
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.1
sys/dev/fdt/fixedfactorclock.c: revision 1.1
sys/dev/fdt/fdt_subr.c: revision 1.14
sys/arch/evbarm/conf/SUNXI: revision 1.7
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.2
sys/arch/arm/sunxi/sun8i_a83t_gpio.c: revision 1.1
sys/dev/fdt/fdt_subr.c: revision 1.15
sys/arch/evbarm/conf/SUNXI: revision 1.8
sys/arch/arm/sunxi/sunxi_ccu_nm.c: revision 1.3
sys/dev/ic/dwc_mmc_reg.h: revision 1.6
sys/dev/fdt/fdt_subr.c: revision 1.16
sys/arch/evbarm/conf/SUNXI: revision 1.9
usr.bin/config/mkmakefile.c: revision 1.70
sys/dev/fdt/fdt_phy.c: revision 1.1
sys/arch/evbarm/conf/ODROID-XU: file removal
sys/arch/arm/fdt/arm_fdt.c: revision 1.4
sys/arch/arm/samsung/exynos_reg.h: revision 1.14
sys/conf/files: revision 1.1180
sys/arch/arm/samsung/exynos_reg.h: revision 1.15
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.4
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.5
sys/arch/arm/sunxi/sunxi_ccu.h: revision 1.6
sys/dev/ic/dwc_mmc_var.h: revision 1.6
sys/arch/arm/samsung/exynos_combiner.c: revision 1.7
sys/arch/evbarm/exynos/platform.h: revision 1.2
sys/arch/arm/fdt/files.fdt: revision 1.12
sys/arch/evbarm/conf/std.exynos: revision 1.2
sys/arch/evbarm/conf/std.exynos: revision 1.3
sys/arch/arm/rockchip/rockchip_dwcmmc.c: revision 1.6
sys/arch/arm/sunxi/sunxi_com.c: revision 1.1
sys/dev/led.h: revision 1.1
sys/arch/evbarm/conf/std.exynos: revision 1.5
sys/arch/arm/sunxi/sunxi_com.c: revision 1.2
sys/arch/evbarm/conf/files.evbarm: revision 1.26
usr.bin/config/defs.h: revision 1.99
sys/arch/arm/fdt/arm_fdtvar.h: revision 1.6
sys/arch/arm/samsung/exynos_soc.c: revision 1.32
sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.1
sys/arch/arm/sunxi/sun6i_a31_ccu.c: revision 1.2
sys/arch/arm/samsung/mct.c: revision 1.11
sys/arch/evbarm/conf/ODROID-U: file removal
sys/arch/arm/samsung/mct.c: revision 1.12
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.1
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.2
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.3
sys/arch/arm/sunxi/sunxi_ccu_nkmp.c: revision 1.4
Get the EXYNOS kernel building again with recent FDT changes. Untested.
Use arm_fdt_cpu_hatch and add mmu entry for DTB
Fix exynos5 devmap, bootstrap, and implement early_putchar.
Calculate UART frequency based on bootloader config.
Fix KERNEL_BASE_PHYS (how did this ever work?)
Avoid divide-by-zero for unconfigured PLLs
Correctly initialize i2cbus attach args.
Add delay and enable mct timecounter.
Fix build w/o VERBOSE_INIT_ARM
Remove ODROID-U and ODROID-XU kernel configs as they no longer work.
- Replace CONSADDR with SSCOM2CONSOLE in example
- Remove gtmr (Exynos5422 uses mct)
- cinclude EXYNOS.local instead of TEGRA.local
Use fdtbus_intr_establish to hook in block interrupts instead of
intr_establish.
Simplify MCT; just enable it and then attach an ARMv7 generic timer.
Add support for building DTB files during kernel build, from christos.
build vexpress-v2p-ca15-tc1.dtb with the kernel
build tegra124-apalis-eval.dtb, tegra124-jetson-tk1.dtb, tegra124-nyan-big.dtb, tegra124-nyan-blaze.dtb, and tegra124-venice2.dtb with the kernel
Allow multiline makeoptions to work by quoting the newline..
Bump for quoting makeoptions with multiple lines.
un-c99
bump required config version for multiline makeoptions feature
Set DTS makeoption in kernel config
Assign DTB files to a variable so we can make -V DTB
put the dtb files with their kernels.
no need for debug printing.
Don't assume that CPU index = GIC CPU interface number. We can determine
the current CPU interface number by reading from the read-only
GICD_ITARGETSR0 through GICD_ITARGETSR7 registers.
This gets interrupts working on Exynos 5422, where the boot processor has
GIC CPU interface #4.
use -v to get the expanded variable.
Use -v to get the expanded variables.
Get baud rate from sclk_uartN instead of uartN. Print IRQ number at attach.
Fix PLL con0 register locations and add uart clocks
Disable exyortc for now, it doesn't work.
More or less a rewrite of dwc_mmc, based on awin_mmc, adding DMA support.
Update for new dwc_mmc driver
Fix dmesg
Add Exynos 5410 clock controller driver.
Fix a few typos in clock parent names for mmc clocks.
From jmcneill@
Update for new dwc_mmc driver
Implement platform reset for exynos5
Attach fdtbus to a /clocks node with no compatible string.
Add support for ARM Power State Coordination Interface (PSCI).
Support interrupt sharing.
Add initial support for Allwinner H3 SoC.
ARM Trusted Firmware reserves SGIs 8-15 for secure use. Even without ATF,
U-Boot on some platforms may use SGIs in this range for the PSCI
implementation.
Change ARMGIC_IPI_BASE to 0 from (16 - NIPI) and add a compile-time assert
to ensure that we don't end up with a conflict.
Add H3 MMC support
SD/MMC clock fixes
Add FDT PHY interface.
Add glue for generic ehci/ohci bindings.
Rename a variable, NFC.
Support parents in different clock domains.
Add USB stuff. Doesn't quite work yet.
Synopsys DesignWare APB UART needs "options COM_AWIN" for now.
Add i2c glue.
Add RTC driver.
PHY registers start at index 1. Now USB works.
Don't allow sharing edge and level triggered interrupts.
Add arm_fdt_memory_dump helper for dumping physical addresses from ddb
Print clocks with aprint_debug
Remove unused defines
Add fdtbus_get_string helper
Add of_search_compatible, which searches an array of compat_data structures
for a matching "compatible" entry matching the supplied OFW node. This
allows us to associate data with compatible strings.
Add driver for Allwinner Gigabit Ethernet (EMAC) as found in sun8i and
later family SoCs.
This is a port of my FreeBSD driver which has been confirmed to work on
Allwinner H3, A83T, and A64 SoCs.
Fix dmesg
Add basic support for Allwinner A31.
Add basic FDT GPIO support.
Fix the pinctrl api to match the spec. A pinctrl config can have more
than one xref, and an xref may have specifier data associated with it.
Enable sunxi pinctrl support
Adjust to new pinctrl API
Add P2WI/RSB driver, based on awin_p2wi.c.
Fix typo in a compat string.
Configure pin defaults at attach
No need to explicitly set pinctrl config 0 now
Fix some register definitions.
Disallow sharing between MPSAFE and non-MPSAFE handlers.
Add of_match_compat_data.
This routine searches an array of compat_data structures for a
matching "compatible" entry matching the supplied OFW node.
Add options __HAVE_CPU_UAREA_ALLOC_IDLELWP
Add support for reserved memory and MEMORY_DISK_DYNAMIC for FDT-based
kernels.
the extent code cannot use the full range of u_long,
so ignore the last page before 4GB too. ok jmcneill@
Copy install ramdisk to releasedir. Provide both a raw ffs and
Legacy U-Boot version of it.
Replace HUMMINGBIRD_A31 with SUNXI kernel on armv7.img and include .dtb
files for SUNXI and TEGRA kernels on the MSDOS partition.
Let the controller provide a default name for pins. This makes pins easier
to locate when we have multiple banks and a variable number of pins per
bank.
Attach gpio(4) to sunxigpio
Test for kernel build directory before reading DTB list
Add support for Allwinner A83T SoC.
Add A83T files
Fixup busdma sync and locking in the RX path. Disable batch RX/TX ints.
Fix AHB2 register definition and explicitly set AHB2 parent to PLL_PERIPH0/2 -- this gives us 50% more bus bandwidth for emac
Restore TX_INTERVAL_DEFAULT to 64
Drop the sunxi_emac_rx_batch feature. It was originally designed to
reduce the amount of mutex unlock/lock cycles during the RX path on
FreeBSD and if_input, but it is not required to drop the lock before
calling if_percpuq_enqueue on NetBSD.
Write back the data value instead of mask in sunxi_gpio_write
Add a helper for exposing LED controls via sysctl.
Add GPIO LED driver.
add gpioleds
Add misc. gates and resets driver, and explicitly enable PIO clocks
at attach.
Add fdtbus_get_string_index helper.
Add driver for fixed-factor clocks.
Add ffclock
Remove the requirement for ehci to attach after companion devices.
"go for it" - skrll@
Remove the hack to find companion devices and just assume 1 companion if
ETTF flag is not set.
Remove pass numbers for ehci/ohci now that the attach order no longer matters
Use unsigned char for ctype functions, suggested by christos
Add : to body of populate_sunxi to appease bash.
port-evbarm/52388: Fix number of args to a debug printf.
|
| 1.81.6.3.2.1 |
| 13-Dec-2017 |
matt | Build MTKATLAS
|
| 1.92.2.4 |
| 26-Jan-2019 |
pgoyette | Sync with HEAD
|
| 1.92.2.3 |
| 26-Nov-2018 |
pgoyette | Sync with HEAD, resolve a couple of conflicts
|
| 1.92.2.2 |
| 06-Sep-2018 |
pgoyette | Sync with HEAD
Resolve a couple of conflicts (result of the uimin/uimax changes)
|
| 1.92.2.1 |
| 07-Apr-2018 |
pgoyette | Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
|
| 1.93.2.2 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.93.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.107.2.1 |
| 27-Nov-2019 |
martin | Pull up following revision(s) (requested by jmcneill in ticket #491):
sys/arch/evbarm/conf/BEAGLEBOARD_INSTALL: file removal
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.2
sys/arch/arm/ti/ti_sysc.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.1
sys/arch/arm/ti/ti_rng.c: revision 1.2
sys/dev/i2c/tps65950.c: file removal
sys/arch/evbarm/conf/std.ti: file removal
sys/dev/i2c/files.i2c: revision 1.101
sys/dev/i2c/files.i2c: revision 1.102
sys/dev/i2c/at24cxx.c: revision 1.32
sys/dev/i2c/files.i2c: revision 1.103
sys/dev/i2c/twl4030.c: revision 1.1
sys/dev/i2c/files.i2c: revision 1.104
sys/dev/i2c/twl4030.c: revision 1.2
sys/dev/i2c/twl4030.c: revision 1.3
sys/arch/arm/ti/ti_com.c: revision 1.6
sys/arch/arm/ti/ti_com.c: revision 1.7
sys/arch/arm/ti/ti_com.c: revision 1.8
sys/dev/fdt/cpufreq_dt.c: revision 1.11
sys/arch/arm/ti/ti_iic.c: revision 1.1
sys/dev/fdt/cpufreq_dt.c: revision 1.12
sys/arch/arm/ti/ti_usb.c: revision 1.1
sys/arch/arm/ti/ti_iic.c: revision 1.2
sys/dev/fdt/cpufreq_dt.c: revision 1.13
sys/arch/arm/ti/ti_iic.c: revision 1.3
sys/arch/arm/ti/ti_iic.c: revision 1.4
sys/arch/evbarm/conf/files.ti: file removal
sys/arch/evbarm/conf/BEAGLEBOARDXM: file removal
sys/arch/arm/dts/omap3-n900.dts: revision 1.1
sys/arch/arm/ti/ti_edma.h: revision 1.1
sys/arch/evbarm/conf/OVERO_INSTALL: file removal
sys/arch/arm/ti/ti_usbtll.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.5
etc/etc.evbarm/Makefile.inc: revision 1.108
sys/arch/arm/ti/files.ti: revision 1.6
sys/dev/i2c/tps65217pmic.c: revision 1.13
etc/etc.evbarm/Makefile.inc: revision 1.109
sys/arch/arm/ti/files.ti: revision 1.7
sys/dev/i2c/tps65217pmic.c: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.8
sys/arch/arm/ti/files.ti: revision 1.9
sys/dev/fdt/usbnopphy.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.55
sys/arch/evbarm/conf/GENERIC: revision 1.56
sys/arch/evbarm/conf/GENERIC: revision 1.57
sys/arch/evbarm/conf/GENERIC: revision 1.58
sys/arch/evbarm/conf/GENERIC: revision 1.59
sys/arch/evbarm/conf/BEAGLEBONE: file removal
sys/arch/arm/ti/omap2_gpmcreg.h: revision 1.1
sys/arch/arm/ti/ti_otgreg.h: revision 1.1
sys/arch/arm/ti/ti_tptc.c: revision 1.1
sys/arch/evbarm/conf/IGEPV2: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.10
sys/dev/i2c/tda19988.c: revision 1.1
sys/arch/evbarm/conf/OVERO: file removal
sys/dev/i2c/tda19988.c: revision 1.2
sys/dev/i2c/tda19988.c: revision 1.3
sys/arch/arm/ti/omap3_dss.c: revision 1.1
sys/arch/evbarm/conf/BEAGLEBONE_INSTALL: file removal
sys/arch/arm/ti/ti_omapintc.c: revision 1.2
etc/etc.evbarm/Makefile.inc: revision 1.112
etc/etc.evbarm/Makefile.inc: revision 1.113
sys/arch/arm/ti/ti_div_clock.c: revision 1.1
etc/etc.evbarm/Makefile.inc: revision 1.114
sys/arch/evbarm/conf/N900: revision 1.32
sys/arch/evbarm/conf/N900: revision 1.33
distrib/utils/embedded/conf/armv7.conf: revision 1.36
sys/arch/evbarm/conf/GENERIC: revision 1.60
distrib/utils/embedded/conf/armv7.conf: revision 1.37
sys/arch/arm/ti/omap2_nand.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.61
sys/arch/arm/ti/omap2_nand.c: revision 1.2
sys/arch/evbarm/conf/GENERIC: revision 1.62
distrib/utils/embedded/conf/armv7.conf: revision 1.39
sys/arch/evbarm/conf/GENERIC: revision 1.63
sys/arch/arm/ti/ti_fb.c: revision 1.1
sys/arch/evbarm/conf/GENERIC: revision 1.64
sys/arch/evbarm/conf/GENERIC: revision 1.65
sys/arch/evbarm/conf/GENERIC: revision 1.66
sys/arch/evbarm/conf/GENERIC: revision 1.67
sys/arch/arm/ti/ti_platform.c: revision 1.7
sys/arch/arm/ti/ti_platform.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.2
sys/arch/arm/ti/ti_platform.c: revision 1.9
sys/arch/arm/ti/am3_prcm.c: revision 1.3
sys/arch/arm/ti/am3_prcm.c: revision 1.4
sys/arch/arm/ti/am3_prcm.c: revision 1.5
sys/arch/arm/ti/am3_prcm.c: revision 1.6
sys/arch/arm/ti/am3_prcm.c: revision 1.7
sys/arch/evbarm/conf/DEVKIT8000: file removal
sys/arch/arm/ti/am3_prcm.c: revision 1.8
sys/arch/arm/ti/am3_prcm.c: revision 1.9
sys/dev/fdt/syscon.c: revision 1.4
sys/arch/arm/ti/files.ti: revision 1.10
sys/arch/arm/ti/ti_mux_clock.c: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.11
sys/arch/arm/ti/if_cpswreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhc.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.12
sys/arch/arm/ti/ti_sdhc.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.13
sys/arch/arm/ti/files.ti: revision 1.14
sys/arch/arm/ti/files.ti: revision 1.15
sys/arch/arm/ti/files.ti: revision 1.16
sys/arch/arm/ti/omap3_cm.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.17
sys/arch/arm/ti/omap3_cm.c: revision 1.2
sys/arch/arm/ti/files.ti: revision 1.18
sys/arch/arm/ti/omap3_cm.c: revision 1.3
sys/arch/arm/ti/files.ti: revision 1.19
sys/arch/arm/ti/omap3_cm.c: revision 1.4
sys/arch/arm/ti/ti_motg.c: revision 1.1
sys/arch/arm/ti/ti_rngreg.h: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.1
sys/arch/arm/dts/omap3-beagle-xm.dts: revision 1.1
sys/arch/arm/ti/am3_platform.c: revision 1.1
sys/arch/arm/ti/ti_sdhcreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARDXM_INSTALL: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.22
sys/arch/evbarm/conf/README.evbarm: revision 1.23
sys/arch/arm/ti/ti_platform.c: file removal
sys/arch/evbarm/conf/README.evbarm: revision 1.24
sys/arch/arm/ti/ti_omaptimer.c: revision 1.2
sys/arch/arm/ti/ti_prcm.c: revision 1.2
sys/arch/evbarm/conf/README.evbarm: revision 1.25
sys/arch/arm/ti/ti_omaptimer.c: revision 1.3
sys/arch/arm/ti/ti_prcm.c: revision 1.3
sys/arch/evbarm/conf/README.evbarm: revision 1.26
sys/arch/arm/ti/ti_omaptimer.c: revision 1.4
sys/arch/evbarm/conf/README.evbarm: revision 1.27
sys/arch/arm/ti/ti_ehci.c: revision 1.1
sys/arch/arm/ti/files.ti: revision 1.20
sys/arch/arm/ti/ti_cpufreq.c: revision 1.1
sys/arch/arm/ti/ti_cpufreq.c: revision 1.2
sys/arch/arm/fdt/smsh_fdt.c: revision 1.2
sys/arch/arm/ti/omap3_dssreg.h: revision 1.1
sys/arch/evbarm/conf/OVERO: revision 1.56
sys/arch/evbarm/conf/TI: file removal
sys/arch/arm/dts/omap3-beagle.dts: revision 1.1
sys/dev/fdt/fdtvar.h: revision 1.55
sys/dev/fdt/fdtvar.h: revision 1.56
distrib/utils/embedded/files/armv7_boot_nonefi.cmd: revision 1.2
sys/dev/fdt/fdt_phy.c: revision 1.6
sys/arch/arm/ti/ti_iicreg.h: revision 1.1
sys/arch/arm/ti/ti_lcdc.c: revision 1.1
sys/arch/arm/ti/ti_gpio.c: revision 1.1
sys/arch/arm/ti/ti_iicreg.h: revision 1.2
sys/arch/arm/ti/ti_lcdc.c: revision 1.2
sys/dev/fdt/files.fdt: revision 1.46
sys/arch/arm/ti/ti_gpio.c: revision 1.2
sys/arch/arm/ti/ti_iicreg.h: revision 1.3
sys/arch/arm/ti/ti_lcdc.c: revision 1.3
sys/dev/fdt/files.fdt: revision 1.47
sys/arch/arm/ti/ti_gpio.c: revision 1.3
sys/dev/fdt/pinctrl_single.c: revision 1.1
sys/arch/evbarm/conf/files.generic: revision 1.9
sys/arch/arm/ti/ti_gpmc.c: revision 1.1
sys/arch/arm/ti/ti_lcdcreg.h: revision 1.1
sys/arch/evbarm/conf/BEAGLEBOARD: file removal
sys/arch/arm/ti/omap3_prm.c: revision 1.1
sys/arch/arm/ti/ti_platform.h: file removal
sys/arch/arm/ti/omap3_platform.c: revision 1.1
sys/arch/arm/ti/ti_prcm.h: revision 1.2
sys/arch/arm/ti/omap3_platform.c: revision 1.2
sys/arch/arm/ti/ti_prcm.h: revision 1.3
sys/arch/arm/ti/ti_prcm.h: revision 1.4
sys/dev/fdt/fdt_clock.c: revision 1.9
sys/arch/arm/ti/ti_edma.c: revision 1.1
sys/arch/arm/ti/ti_otg.c: revision 1.1
distrib/utils/embedded/files/armv7_boot.cmd: revision 1.15
sys/arch/arm/ti/if_cpsw.c: revision 1.7
sys/arch/evbarm/conf/std.igepv2: file removal
sys/arch/arm/ti/if_cpsw.c: revision 1.8
sys/arch/arm/ti/ti_dpll_clock.c: revision 1.1
Adapt ti fdt glue to support GENERIC kernel.
Do not search 64-bit directories for dts files
Fix am33xx_platform_early_putchar for pre-MMU output
Add bus driver for TI sysc interconncet.
Make com work again
Add EDMA TPCC and TPTC drivers.
Add driver for one-register-per-pin type pinctrl devices.
Add MMCHS support.
Add USB support.
Disable autoidle
Place devmap above KERNEL_IO_VBASE
Use Timer2 for timecounter, and enable hw module.
Add support for TI AM335x
Add atmel,24c256 compat data
Add I2C support.
Add tiiic, tps65217pmic
Add FDT support
Fix early putchar, add reset func
No support for tegra210 in armv7 kernel
Switch to GENERIC kernels only.
Get mac address from DT
Skip nodes with an "opp-suspend" property and fix tables that have disabled
nodes in the middle.
enumerate devices under child "clocks" node
Add support for platform specific opp table filters.
Add fdtbus_clock_count to count the number of clock references on a given node
enumerate devices under child "clocks" node
Add AM335x DVFS support.
Enable TI AM335x DVFS support
Add support for GPIO controller.
Add tigpio
Unhook BEAGLEBONE kernel from the build
Remove BEAGLEBONE kernel config (AM335x SoC is supported by GENERIC now).
Add support for hardware RNG.
Add tirng
Add explicit FDT_OPP for operating-points-v2 so the link set won't be empty
Rename SOC_TI_AM335X to SOC_AM33XX and rename ti_platform.c to
am3_platform.c
Set stdout-path on TI OMAP3 BeagleBoard
Add support for TI OMAP3.
Add OMAP3 support.
Move a lot of *.dtb files to a dtb/ subdirectory on the FAT partition.
Mkimage (eroneously) creates a FAT16 partition (despite the configuration
asking for FAT32), and that has a root directory size limit.
Idea from Jared.
Skip xref if it is 0
Add generic USB PHY driver
Add driver for TI TWL4030 Power Management IC
Use the hwmod clk to get the timer rate and explicitly enable the
timecounter timer.
Add OMAP3 USB support.
Add twl, usbnopphy, tiusb, tiusbtll
Move omap3 dtb files to /boot/dtb
Remove BEAGLEBOARD kernel from list of kernels to build
Remove BEAGLEBOARD kernel (supported by GENERIC now)
Fix PRM_RSTCTRL_RST_DPLL3 definition, now reset works.
Remove DEVKIT8000 kernel (GENERIC should work now)
Remove DPLL5 init ported from old omap code, it is not required
Set the stdout-path on xM like Ti OMAP3 BeagleBoard
Remove BEAGLEBOARDXM from the build
Remove BEAGLEBOARDXM kernel (supported by GENERIC now)
Handle different register layout on OMAP3
Add omapfb to FDT-ized TI port.
Use dss as console on Nokia N900.
Enable IRQ status bits for omap3 type and set speed properly
Add RTC support
Remove tps65950pm (hardware now supported by twl4030.c)
Add NAND flash support.
Add tigpmc, omapnand
Attach tiusb before the default pass since it adds a bus to reduce kernel output
Replace tps65950pm with twl (the former has been removed)
Fix non-FDT build
Cleanup and remove dependency on arch/arm/omap
Add support for GPIO interrupts and fix reading the state of output pins.
Match smsc,lan9115 and honour local-mac-address/mac-address properties
Only one instance of twl(4) is needed
Remove OVERO from build, and commented out N900 kernel config
OMAP3 SoC and all peripherals in the OVERO kernel are now supported by
GENERIC.
Remove commented out IGEPV2 entry
OMAP3 SoC and all peripherals in the IGEPV2 kernel are now supported by
GENERIC.
No longer used.
Also match ti,omap2-onenand
Defer power monitor polling to the sysmon taskq thread to avoid i2c transactions in intr context
Add driver for NXP TDA19988 HDMI encoder
Add support for AM335x display controller (LCDC).
Add tdahdmi, tilcdc, tifb
Test DRM_MODE_* flags, not VID_*
Comment out mode fixup (not needed it seems)
Use 297MHz for display clock
Select closest rate to desired pixel clock
Speed up mode setting a bit and turn off the display while changing modes
|
| 1.122.2.1 |
| 31-May-2021 |
cjep | sync with head
|
