| History log of /src/etc/etc.hpcmips |
| Revision | Date | Author | Comments |
| 1.59 | 24-Oct-2003 |
jdolecek | switch over to unified MAKEDEV
|
| 1.58 | 10-Oct-2003 |
jdolecek | reassing majors for crypto and pf to use the newly defined MI major range
|
| 1.57 | 03-Oct-2003 |
dsl | Add a /dev/constty == /dev/console but with minor 1.
Use for tty sessions on 'console' so that output doesn't pinched by anyone
using TIOCCONS to get kernel and system messages.
|
| 1.56 | 19-Sep-2003 |
pooka | add isdn telephony dialout devices
|
| 1.55 | 05-Sep-2003 |
dsl | Put back port specific majors for ptys
|
| 1.54 | 30-Aug-2003 |
dsl | Change the way pseudo tty devices are generated in order to avoid
any pipes and running other commands (eg dd).
Measurable speeds up creating pseudo ttys.
(there has to be a better way than editing 51 files! - tedious at only
6 key presses per file)
|
| 1.53 | 22-Aug-2003 |
itojun | create /dev/crypto
|
| 1.52 | 27-Jul-2003 |
itojun | reserve cdev major # for PF. ok'ed by technical-exec
|
| 1.51 | 07-May-2003 |
christos | fix ugen issue from latest shell changes that treat numeric constants
differently depending on their prefix.
|
| 1.50 | 27-Apr-2003 |
ragge | Add ksyms to "std" devices.
|
| 1.49 | 17-Apr-2003 |
fvdl | Add an 'init' target, that creates the device nodes in the case where
MAKEDEV is being called from init(8) to create an MFS /dev. For most
ports, this is the same as 'all'. The only exceptions are i386 and
x86_64.
|
| 1.48 | 31-Mar-2003 |
perry | make ipl consistently "IP Filter"
|
| 1.47 | 30-Mar-2003 |
wiz | Miscellaneous fixes from Igor Sobrado, in PRs 20943-20959.
|
| 1.46 | 31-Dec-2002 |
shin | add PCI bus access device.
|
| 1.45 | 28-Nov-2002 |
hamajima | add midi and sequencer.
|
| 1.44 | 21-Oct-2002 |
lukem | whitespace consistency cleanup
|
| 1.43 | 21-Oct-2002 |
lukem | no need to chown root / chgrp wheel
|
| 1.42 | 14-Oct-2002 |
takemura | Enabled apm command device node for hpcmips and put apm.8 and zzz.8 man pages
into mi directory.
|
| 1.41 | 04-Oct-2002 |
elric | Include cgd on the list of things to be mknod(8)ed on all arches.
|
| 1.40 | 09-Aug-2002 |
lukem | - in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
|
| 1.39 | 19-Jun-2002 |
wiz | By default, make ugen0 in the usbs target too, as i386 and x86_64 already did.
|
| 1.38 | 18-Jun-2002 |
wiz | Update comment on how to regenerate MAKEDEV(8) after changing the
MAKEDEV script. Not that anybody acts on it, but it's nicer if it's correct.
|
| 1.37 | 17-Jun-2002 |
christos | Add device creation support for systrace.
|
| 1.36 | 23-Mar-2002 |
hamajima | branches: 1.36.2;
add audio device
|
| 1.35 | 23-Mar-2002 |
shin | add lkm.
|
| 1.34 | 23-Mar-2002 |
shin | change MAXPARTITIONS to 16.
|
| 1.33 | 16-Mar-2002 |
martin | Rename ISDN devices, per discussion on tech-kern. The network devices
become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).
|
| 1.32 | 13-Mar-2002 |
simonb | Remove trailing semicolons from lines that don't need them.
TABify many lines.
|
| 1.31 | 04-Mar-2002 |
lukem | various cleanups inspired by etc.i386/MAKEDEV:
* use "ln -fs foo bar" instead of "rm -f bar; ln -s foo bar"
* remove unnecessary chown root or chgrp wheel directives; older code here
didn't bother doing this, so why be inconsistent
* when making directories, don't use -p and don't redirect stdout to /dev/null
* clean up whitespace
* wrap the main parser code in a function makedev(), and call makedev
instead of "sh $0". (this is a bit faster)
* don't barf when we have fdesc mounted; just skip the devices fdesc provides
(these files should really be automagically generated...)
|
| 1.30 | 03-Mar-2002 |
toshii | Use a tab instead of 7 spaces.
|
| 1.29 | 25-Feb-2002 |
atatat | Change a 62 to a 16, so that the proper number of slots is skipped.
Fixes PR 15650.
|
| 1.28 | 11-Feb-2002 |
augustss | Create the ulpt devices that don't reset the printer on open.
(I don't get this, I could have sworn I committed these files a while ago.)
|
| 1.27 | 02-Feb-2002 |
tls | Fix minor mistake made while increasing number of pty devices: where we had
"pty0 pty1 pty2 pty3" before, for a total of 64 device nodes, we now want
just "pty0" for a total of 62 -- the original commit had "pty0 pty1" for a
total of 124, which ate too many inodes and made "ls /dev" a bit messy.
|
| 1.26 | 02-Feb-2002 |
tls | Add support for many more (930 or 992) ptys than the current 256.
Changes taken from the i386 MAKEDEV. Note that the unusual use of 'dd'
to index an array was chosen because 'dd' is on all ports' install media.
This form of this change comes from Andrew Brown; the original idea to
bump the number of ptys this way comes from Brian Marcotte at Panix.
|
| 1.25 | 21-Jan-2002 |
abs | Move 'wscons' to directly after 'std'. Various MAKEDEVs had it pretty much
at the end, and as wscons (actually ttyE0) is required to login on the console,
it is probably better that an out of space MAKEDEV fail on some other device.
|
| 1.24 | 19-Jan-2002 |
oster | Update the various MAKEDEV's to reflect the default of 8 RAIDframe devices.
|
| 1.23 | 13-Jan-2002 |
manu | Added clockctl
|
| 1.22 | 08-Jan-2002 |
lukem | fix a couple of spelling mistakes in the i4b* descriptions
|
| 1.21 | 19-Dec-2001 |
wiz | Standardize ch* and uk* descriptions.
|
| 1.20 | 19-Dec-2001 |
wiz | Standardize scsibus* description.
|
| 1.19 | 15-Nov-2001 |
augustss | Make more USB controller devices. You can easily have 6 these days.
|
| 1.18 | 29-Oct-2001 |
augustss | Create wsmuxN and wsmuxctlN together.
Use separate nodes for wsmouse and wskbd.
|
| 1.17 | 13-Oct-2001 |
augustss | Allow creation of wsmuxctl devices.
|
| 1.16 | 10-May-2001 |
lukem | don't prevent pty6 from creating ttyv*, since there's no custom console on ttyv
|
| 1.15 | 08-Jan-2001 |
martin | Add isdn devices
|
| 1.14 | 27-Sep-2000 |
tsutsui | Fix memory disk entries (md?c -> md?d)
since RAW_PART == 3 on these ports.
|
| 1.13 | 23-Sep-2000 |
augustss | Prepare for USB scanners, and add Rio 500 support while messing.
|
| 1.12 | 27-Jul-2000 |
mason | Move to a default of 64 PTYs in "all" targets. Normalize "floppy" and
"minimal" targets to use 16 PTYs.
|
| 1.11 | 12-Mar-2000 |
takemura | branches: 1.11.4;
Add wsmux0 and wsmux1.
|
| 1.10 | 11-Mar-2000 |
shin | add missing callunit.
fix ucbsnd.
|
| 1.9 | 04-Mar-2000 |
uch | add TX39 internal UART and UCB1200 audio device.
|
| 1.8 | 29-Feb-2000 |
augustss | Make /dev/usb, a node where USB events can be read.
Also add ttyU to hpcmips.
|
| 1.7 | 21-Jan-2000 |
tsutsui | - rename (revert) normal memory disk device name /dev/mdX -> /dev/mdXa
- now raw partitions are used for memory disk ioctls
|
| 1.6 | 18-Dec-1999 |
tsutsui | Correct md* entries.
|
| 1.5 | 18-Oct-1999 |
ad | Back out previous
|
| 1.4 | 06-Oct-1999 |
ad | Final chown user.group -> chown user:group changes.
|
| 1.3 | 20-Sep-1999 |
hubertf | branches: 1.3.2;
edit for MAKEDEV.8
|
| 1.2 | 18-Sep-1999 |
hubertf | Tidy up comments a bit, to make the manpages generated from the a bit
nicer. Also, add a comment on how to re-generate the manpages if the
MAKEDEV file was changed.
|
| 1.1 | 16-Sep-1999 |
takemura | branches: 1.1.1;
Initial revision
|
| 1.1.1.1 | 16-Sep-1999 |
takemura | Import NetBSD/hpcmips source files from hpcmips repository.
file list:
sys/arch/hpcmips/
distrib/hpcmips/
etc/etc.hpcmips/
lib/libc/arch/mips/fplib/
lib/libc/arch/mips/fplib/Makefile.inc
lib/libc/arch/mips/fplib/environment.h
lib/libc/arch/mips/fplib/fplib_glue.c
lib/libc/arch/mips/fplib/fplib_libc.c
lib/libc/arch/mips/fplib/hpcmips-gcc.h
lib/libc/arch/mips/fplib/softfloat-macros.h
lib/libc/arch/mips/fplib/softfloat-specialize.h
lib/libc/arch/mips/fplib/softfloat.c
lib/libc/arch/mips/fplib/softfloat.h
lib/libc/arch/mips/gen/ieee.h
lib/libc/arch/mips/gen/sf_fabs.c
lib/libc/arch/mips/gen/sf_flt_rounds.c
lib/libc/arch/mips/gen/sf_fpgetmask.c
lib/libc/arch/mips/gen/sf_fpgetround.c
lib/libc/arch/mips/gen/sf_fpgetsticky.c
lib/libc/arch/mips/gen/sf_fpsetmask.c
lib/libc/arch/mips/gen/sf_fpsetround.c
lib/libc/arch/mips/gen/sf_fpsetsticky.c
lib/libc/arch/mips/gen/sf_isinf.c
lib/libc/arch/mips/gen/sf_ldexp.c
lib/libc/arch/mips/gen/sf_modf.c
|
| 1.3.2.1 | 27-Dec-1999 |
wrstuden | Pull up to last week's -current.
|
| 1.11.4.3 | 26-Feb-2001 |
he | Pull up revision 1.14 (requested by tsutsui):
Fix memory disk entries (md?c -> md?d) since RAW_PART == 3 on
these ports.
|
| 1.11.4.2 | 11-Aug-2000 |
mason | Move to default of 16 PTYs in "floppy" and "minimal" targets.
Requested by mason, approved by jhawk.
|
| 1.11.4.1 | 11-Aug-2000 |
mason | Create 64 PTYs in "all" target by default.
Requested by mason, approved by jhawk.
|
| 1.36.2.2 | 12-Apr-2004 |
jmc | Pullup patch (requested by taca in ticket #1664)
Fix ugen issue from latest shell changes that treat numeric constants
differently depending on their prefix.
|
| 1.36.2.1 | 10-Aug-2002 |
lukem | Pull up revision 1.40 (requested by lukem):
- in local), only run $0.local if it is an existing file
(prevents spurious warning for mfs /dev, amongst other things)
- for mipsco, news68k, newsmips: ensure that "umask 77" is run after $0.local
- for playstation2: add local) target, and use in all) (for consistency)
|
| 1.8 | 23-Sep-2018 |
maxv | Remove ISDN from the kernel. It has remained unmaintained for a long time,
is of poor quality, and is now an obstacle to MP-ification. It was removed
ten years ago from FreeBSD for the same reason.
This retires a big user of the mbuf API, and will ease maintenance of the
kernel.
|
| 1.7 | 08-Dec-2016 |
nat | branches: 1.7.12; 1.7.14;
Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.
|
| 1.6 | 16-Aug-2012 |
abs | branches: 1.6.16;
Add 'bpf' to all ramdisk targets (*), or floppy targets if ramdisk calls that.
Sort bpf to come directly after 'std' where relevant.
* (apart from etc.evbppc who's ramdisk target *only* builds md0,
which just doesn't make sense).
Should allow a fighting chance for dhcpcd to get an IP address.
|
| 1.5 | 26-Feb-2011 |
ahoka | branches: 1.5.4;
Import the Flash and NAND subsytem code contributed by the University
of Szeged, Hungary.
The commit includes:
- Flash layer, which gives a common API to access flash devices
- NAND controller subsystem for the flash layer
- An example OMAP driver which is used on BeagleBoard or alike ARM boards
|
| 1.4 | 15-Jan-2007 |
hubertf | branches: 1.4.32;
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@
|
| 1.3 | 24-Oct-2003 |
jdolecek | branches: 1.3.16;
sync with reality, put back some entries mistakely omitted
in the initial conversion from MD MAKEDEV
|
| 1.2 | 19-Oct-2003 |
jdolecek | determine the platform number of disk partitions by looking
at MAXPARTITIONS/OLDMAXPARTITIONS in kernel sources, so that it wouldn't
need to be specified separately in MAKEDEV.conf
change platform MAKEDEV.conf to contain only MD targets and nothing else;
simplify the parsing in MAKEDEV.awk accordingly
|
| 1.1 | 15-Oct-2003 |
jdolecek | MD part of unified MAKEDEV
this contains information about disk partitions used by platform,
and MD MAKEDEV targets, such as 'init', MD part of 'all',
as well as any other MD-specific targets not covered by MAKEDEV.tmpl
|
| 1.3.16.1 | 18-Feb-2007 |
tron | Pull up following revision(s) (requested by hubertf in ticket #429):
etc/etc.bebox/MAKEDEV.conf: revision 1.5
etc/etc.x68k/MAKEDEV.conf: revision 1.8
etc/etc.next68k/MAKEDEV.conf: revision 1.3
etc/etc.ofppc/MAKEDEV.conf: revision 1.5
etc/etc.hpcmips/MAKEDEV.conf: revision 1.4
etc/etc.amd64/MAKEDEV.conf: revision 1.8
etc/etc.algor/MAKEDEV.conf: revision 1.4
etc/etc.sparc64/MAKEDEV.conf: revision 1.12
etc/etc.hp300/MAKEDEV.conf: revision 1.11
etc/etc.sgimips/MAKEDEV.conf: revision 1.8
etc/etc.pc532/MAKEDEV.conf: revision 1.5
etc/etc.mvmeppc/MAKEDEV.conf: revision 1.6
etc/etc.mvme68k/MAKEDEV.conf: revision 1.6
etc/etc.pmppc/MAKEDEV.conf: revision 1.6
etc/etc.cobalt/MAKEDEV.conf: revision 1.4
etc/etc.evbmips/MAKEDEV.conf: revision 1.4
etc/etc.sparc/MAKEDEV.conf: revision 1.11
etc/etc.hpcarm/MAKEDEV.conf: revision 1.7
etc/etc.i386/MAKEDEV.conf: revision 1.12
etc/etc.acorn32/MAKEDEV.conf: revision 1.8
etc/etc.evbppc/MAKEDEV.conf: revision 1.5
etc/etc.amiga/MAKEDEV.conf: revision 1.10
etc/etc.prep/MAKEDEV.conf: revision 1.4
etc/etc.sandpoint/MAKEDEV.conf: revision 1.4
etc/MAKEDEV.tmpl: revision 1.71
etc/etc.alpha/MAKEDEV.conf: revision 1.7
etc/etc.ibmnws/MAKEDEV.conf: revision 1.6
etc/etc.macppc/MAKEDEV.conf: revision 1.7
etc/etc.mmeye/MAKEDEV.conf: revision 1.5
etc/etc.mac68k/MAKEDEV.conf: revision 1.7
etc/etc.vax/MAKEDEV.conf: revision 1.10
etc/etc.arc/MAKEDEV.conf: revision 1.6
etc/etc.hp700/MAKEDEV.conf: revision 1.4
etc/etc.mipsco/MAKEDEV.conf: revision 1.3
etc/etc.atari/MAKEDEV.conf: revision 1.7
Fix MAKEDEV on shark: Move ses(4) devices from MI code (MAKEDEV.tmpl) to
those platforms that actually have the driver.
See also:
http://mail-index.netbsd.org/tech-userlevel/2007/01/08/0001.html
Fixes PR 26511 properly.
OK'd by wrstuden@
|
| 1.4.32.1 | 05-Mar-2011 |
bouyer | Sync with HEAD
|
| 1.5.4.1 | 30-Oct-2012 |
yamt | sync with head
|
| 1.6.16.1 | 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$
tag issues.)
|
| 1.7.14.1 | 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.7.12.1 | 30-Sep-2018 |
pgoyette | Ssync with HEAD
|
| 1.10 | 19-Sep-2008 |
tsutsui | Invoke ${MAKESUMS} for ${RELEASEDIR}/${RELEASEMACHINEDIR}/installation files
as snap_md_post target in etc/etc.${MACHINE}/Makefile.inc rather than
as release target in distrib/${MACHINE}/Makefile so that builds for
release in distrib/${MACHINE}/Makefile don't have to be serialized.
XXX: maybe ramdisk kernels should be installed into binary/kernel dir
XXX: as other ports rather than installation dir, and
XXX: kernel config names should be preserved in their filenames.
|
| 1.9 | 24-Jul-2007 |
pavel | branches: 1.9.12; 1.9.18;
Add a comment reminding to update the release notes if the list of
kernels change.
|
| 1.8 | 02-Dec-2002 |
lukem | branches: 1.8.16; 1.8.20;
consistency tweaks
|
| 1.7 | 02-Dec-2002 |
lukem | - add snap_post, which makes "clean depend all release" in ../distrib/
for all platforms.
- remove now unnecessary replicated code in the various snap_md_post targets
- remove snap_md_pre; nothing uses it any more
- use ${NETBSDSRCDIR} and ${KERNSRCDIR} as appropriate
|
| 1.6 | 02-May-2002 |
lukem | - consistency cleanup
- ensure INSTALLATION_DIRS contains the appropriate extra directories
for a given platform
|
| 1.5 | 23-Mar-2002 |
shin | now TX3922 support is in GENERIC.
|
| 1.4 | 29-Nov-2001 |
thorpej | Change the way kernel sets are specified, and make them
more consistent. To quote the comment in etc/Makefile
that describes how it's done:
# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
|
| 1.3 | 22-Apr-2001 |
shin | add build kernel.
INSTALL_TX3912 INSTALL_TX3922
|
| 1.2 | 17-Jun-2000 |
shin | branches: 1.2.4;
make kernels for TX3912 TX3922.
|
| 1.1 | 12-Jun-2000 |
shin | Do machine dependent part of 'make release'.
|
| 1.2.4.2 | 23-Jun-2000 |
minoura | Sync w/ netbsd-1-5-base.
|
| 1.2.4.1 | 17-Jun-2000 |
minoura | file Makefile.inc was added on branch minoura-xpg4dl on 2000-06-23 15:45:59 +0000
|
| 1.8.20.1 | 22-Sep-2008 |
bouyer | Pull up following revision(s) (requested by tsutsui in ticket #1204):
distrib/hpcarm/Makefile 1.4 - 1.6
distrib/hpcarm/instkernel/Makefile 1.1
distrib/hpcarm/stand/Makefile 1.1 - 1.2
distrib/hpcmips/Makefile 1.29 - 1.33
distrib/hpcmips/instkernel/Makefile 1.1
distrib/hpcmips/stand/Makefile 1.1 - 1.2
distrib/hpcsh/Makefile 1.7 - 1.9
distrib/hpcsh/instkernel/Makefile 1.1
distrib/hpcsh/stand/Makefile 1.1 - 1.2
distrib/miniroot/Makefile 1.65 - 1.66
etc/etc.hpcarm/Makefile.inc 1.6 - 1.8
etc/etc.hpcmips/Makefile.inc 1.9 - 1.10
etc/etc.hpcsh/Makefile.inc 1.4 - 1.5
Build install kernels and standalone bootloaders in their own directories
so that parallel build works properly.
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}
Add ${IMAGE}.gz to dependency list of release:: target as well as the one
in src/distrib/common/Makefile.image so that ${MAKESUMS} will be invoked
after the target image is installed into the releasedir, not before,
even if make -jN is specified.
XXX some ports do ${MAKESUMS} for installation/miniroot files
XXX in etc/etc.${MACHINE}/Makefile.inc later again.
- add INSTALLATION_DIRS+=installation/miniroot so that miniroot.fs.gz
image is installed properly
- INSTALL_IPAQ should be in BUILD_KERNELS rather than KERNEL_SETS
since it requires ramdisk image by mdsetimage(8) in src/distrib
Invoke ${MAKESUMS} for ${RELEASEDIR}/${RELEASEMACHINEDIR}/installation files
as snap_md_post target in etc/etc.${MACHINE}/Makefile.inc rather than
as release target in distrib/${MACHINE}/Makefile so that builds for
release in distrib/${MACHINE}/Makefile don't have to be serialized.
|
| 1.8.16.1 | 22-Sep-2008 |
bouyer | Pull up following revision(s) (requested by tsutsui in ticket #1204):
distrib/hpcarm/Makefile 1.4 - 1.6
distrib/hpcarm/instkernel/Makefile 1.1
distrib/hpcarm/stand/Makefile 1.1 - 1.2
distrib/hpcmips/Makefile 1.29 - 1.33
distrib/hpcmips/instkernel/Makefile 1.1
distrib/hpcmips/stand/Makefile 1.1 - 1.2
distrib/hpcsh/Makefile 1.7 - 1.9
distrib/hpcsh/instkernel/Makefile 1.1
distrib/hpcsh/stand/Makefile 1.1 - 1.2
distrib/miniroot/Makefile 1.65 - 1.66
etc/etc.hpcarm/Makefile.inc 1.6 - 1.8
etc/etc.hpcmips/Makefile.inc 1.9 - 1.10
etc/etc.hpcsh/Makefile.inc 1.4 - 1.5
Build install kernels and standalone bootloaders in their own directories
so that parallel build works properly.
Change remaining instances of ${RELEASEDIR}/${MACHINES} to
${RELEASEDIR}/${RELEASEMACHINEDIR}
Add ${IMAGE}.gz to dependency list of release:: target as well as the one
in src/distrib/common/Makefile.image so that ${MAKESUMS} will be invoked
after the target image is installed into the releasedir, not before,
even if make -jN is specified.
XXX some ports do ${MAKESUMS} for installation/miniroot files
XXX in etc/etc.${MACHINE}/Makefile.inc later again.
- add INSTALLATION_DIRS+=installation/miniroot so that miniroot.fs.gz
image is installed properly
- INSTALL_IPAQ should be in BUILD_KERNELS rather than KERNEL_SETS
since it requires ramdisk image by mdsetimage(8) in src/distrib
Invoke ${MAKESUMS} for ${RELEASEDIR}/${RELEASEMACHINEDIR}/installation files
as snap_md_post target in etc/etc.${MACHINE}/Makefile.inc rather than
as release target in distrib/${MACHINE}/Makefile so that builds for
release in distrib/${MACHINE}/Makefile don't have to be serialized.
|
| 1.9.18.2 | 24-Jul-2007 |
pavel | Add a comment reminding to update the release notes if the list of
kernels change.
|
| 1.9.18.1 | 24-Jul-2007 |
pavel | file Makefile.inc was added on branch matt-mips64 on 2007-07-24 10:49:26 +0000
|
| 1.9.12.1 | 05-Oct-2008 |
mjf | Sync with HEAD.
|
| 1.6 | 19-Dec-2002 |
jdolecek | use single minimal default disktab file for most archs, replacing
MD disktab where possible (everything but vax)
the MD disktab was often either empty, or contained entries even for disks
which support geometry autodetection (SCSI), and/or non-interesting/long
obsolete entries
the old records are still available in example disktab in
/usr/share/examples/disktab/disktab in case anyone would need them
|
| 1.5 | 07-May-2002 |
simonb | Fix some white space niggles.
|
| 1.4 | 07-May-2002 |
jdolecek | fix typos
|
| 1.3 | 09-Apr-2002 |
tron | Back out last change because we now have a special disktab for the
FFS regression test.
|
| 1.2 | 09-Apr-2002 |
tron | Add missing "floppy288" entry required for FFS regression test.
|
| 1.1 | 16-Sep-1999 |
takemura | branches: 1.1.1;
Initial revision
|
| 1.1.1.1 | 16-Sep-1999 |
takemura | Import NetBSD/hpcmips source files from hpcmips repository.
file list:
sys/arch/hpcmips/
distrib/hpcmips/
etc/etc.hpcmips/
lib/libc/arch/mips/fplib/
lib/libc/arch/mips/fplib/Makefile.inc
lib/libc/arch/mips/fplib/environment.h
lib/libc/arch/mips/fplib/fplib_glue.c
lib/libc/arch/mips/fplib/fplib_libc.c
lib/libc/arch/mips/fplib/hpcmips-gcc.h
lib/libc/arch/mips/fplib/softfloat-macros.h
lib/libc/arch/mips/fplib/softfloat-specialize.h
lib/libc/arch/mips/fplib/softfloat.c
lib/libc/arch/mips/fplib/softfloat.h
lib/libc/arch/mips/gen/ieee.h
lib/libc/arch/mips/gen/sf_fabs.c
lib/libc/arch/mips/gen/sf_flt_rounds.c
lib/libc/arch/mips/gen/sf_fpgetmask.c
lib/libc/arch/mips/gen/sf_fpgetround.c
lib/libc/arch/mips/gen/sf_fpgetsticky.c
lib/libc/arch/mips/gen/sf_fpsetmask.c
lib/libc/arch/mips/gen/sf_fpsetround.c
lib/libc/arch/mips/gen/sf_fpsetsticky.c
lib/libc/arch/mips/gen/sf_isinf.c
lib/libc/arch/mips/gen/sf_ldexp.c
lib/libc/arch/mips/gen/sf_modf.c
|
| 1.2 | 04-May-2002 |
jdolecek | Move the sample fstab files to /usr/share/examples/fstab/. Duplicates
or very similar configs removed.
|
| 1.1 | 16-Sep-1999 |
takemura | branches: 1.1.1;
Initial revision
|
| 1.1.1.1 | 16-Sep-1999 |
takemura | Import NetBSD/hpcmips source files from hpcmips repository.
file list:
sys/arch/hpcmips/
distrib/hpcmips/
etc/etc.hpcmips/
lib/libc/arch/mips/fplib/
lib/libc/arch/mips/fplib/Makefile.inc
lib/libc/arch/mips/fplib/environment.h
lib/libc/arch/mips/fplib/fplib_glue.c
lib/libc/arch/mips/fplib/fplib_libc.c
lib/libc/arch/mips/fplib/hpcmips-gcc.h
lib/libc/arch/mips/fplib/softfloat-macros.h
lib/libc/arch/mips/fplib/softfloat-specialize.h
lib/libc/arch/mips/fplib/softfloat.c
lib/libc/arch/mips/fplib/softfloat.h
lib/libc/arch/mips/gen/ieee.h
lib/libc/arch/mips/gen/sf_fabs.c
lib/libc/arch/mips/gen/sf_flt_rounds.c
lib/libc/arch/mips/gen/sf_fpgetmask.c
lib/libc/arch/mips/gen/sf_fpgetround.c
lib/libc/arch/mips/gen/sf_fpgetsticky.c
lib/libc/arch/mips/gen/sf_fpsetmask.c
lib/libc/arch/mips/gen/sf_fpsetround.c
lib/libc/arch/mips/gen/sf_fpsetsticky.c
lib/libc/arch/mips/gen/sf_isinf.c
lib/libc/arch/mips/gen/sf_ldexp.c
lib/libc/arch/mips/gen/sf_modf.c
|
| 1.12 | 25-Sep-2019 |
abs | Switch default console tty from /dev/console to /dev/constty
With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.
The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off
Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)
As discussed on current-users
|
| 1.11 | 13-Jul-2017 |
christos | branches: 1.11.6; 1.11.8;
turn on "console" which can be either the serial console or the glass tty
instead of ttyE0, to facilitate anita tests. From uanand.
|
| 1.10 | 13-Jun-2012 |
martin | Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
|
| 1.9 | 07-Oct-2008 |
abs | branches: 1.9.18; 1.9.20;
Add a constty entry, marked 'off', with otherwise the same settings
as the console. Now when coming up in single user mode the tset in
/.profile can set the terminal type correctly.
Note: I believe constty should be 'on' and console 'off', but thats a
separate discussion
|
| 1.8 | 20-Jun-2004 |
christos | branches: 1.8.26;
remove ad-hok list of pty's from port tty files, and auto-generate it so
that it is consistent, and in the proper order.
|
| 1.7 | 04-Oct-2003 |
dsl | Revert 'console' back to /dev/console (from /dev/constty)
|
| 1.6 | 03-Oct-2003 |
dsl | Change 'console' login to use /dev/constty so that its output isn't
stolen by code that requests system messages using TIOCCONS.
|
| 1.5 | 13-Feb-2002 |
martti | Added ttyp[g-zA-Z] (bin/15594).
|
| 1.4 | 01-May-2001 |
shin | run getty on /dev/ttyE0 by default.
otherwise, user can't start X server.
|
| 1.3 | 12-Aug-2000 |
mason | This should be the final part of moving to 64 PTYs by default. Added
entries for tty{r,s}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} to /etc/ttys.
Thanks to Matthew Green for pointing out the need.
|
| 1.2 | 12-Feb-2000 |
shin | branches: 1.2.4;
change console terminal type from 'unknown' to 'vt100'.
|
| 1.1 | 16-Sep-1999 |
takemura | branches: 1.1.1;
Initial revision
|
| 1.1.1.1 | 16-Sep-1999 |
takemura | Import NetBSD/hpcmips source files from hpcmips repository.
file list:
sys/arch/hpcmips/
distrib/hpcmips/
etc/etc.hpcmips/
lib/libc/arch/mips/fplib/
lib/libc/arch/mips/fplib/Makefile.inc
lib/libc/arch/mips/fplib/environment.h
lib/libc/arch/mips/fplib/fplib_glue.c
lib/libc/arch/mips/fplib/fplib_libc.c
lib/libc/arch/mips/fplib/hpcmips-gcc.h
lib/libc/arch/mips/fplib/softfloat-macros.h
lib/libc/arch/mips/fplib/softfloat-specialize.h
lib/libc/arch/mips/fplib/softfloat.c
lib/libc/arch/mips/fplib/softfloat.h
lib/libc/arch/mips/gen/ieee.h
lib/libc/arch/mips/gen/sf_fabs.c
lib/libc/arch/mips/gen/sf_flt_rounds.c
lib/libc/arch/mips/gen/sf_fpgetmask.c
lib/libc/arch/mips/gen/sf_fpgetround.c
lib/libc/arch/mips/gen/sf_fpgetsticky.c
lib/libc/arch/mips/gen/sf_fpsetmask.c
lib/libc/arch/mips/gen/sf_fpsetround.c
lib/libc/arch/mips/gen/sf_fpsetsticky.c
lib/libc/arch/mips/gen/sf_isinf.c
lib/libc/arch/mips/gen/sf_ldexp.c
lib/libc/arch/mips/gen/sf_modf.c
|
| 1.2.4.1 | 12-Aug-2000 |
mason | This should be the last piece of the move to 64 default PTYs. /etc/ttys now
has entries for 64 ptys.
Thanks to Matthew Green for pointing out the need for this.
|
| 1.8.26.1 | 17-Jan-2009 |
mjf | Sync with HEAD.
|
| 1.9.20.1 | 24-Jun-2012 |
riz | Pull up following revision(s) (requested by martin in ticket #342):
etc/etc.shark/ttys: revision 1.8
etc/etc.hpcsh/ttys: revision 1.11
etc/etc.amiga/ttys: revision 1.24
etc/etc.arc/ttys: revision 1.8
etc/etc.alpha/ttys: revision 1.12
etc/etc.amigappc/ttys: revision 1.3
etc/etc.ofppc/ttys: revision 1.9
etc/etc.hp300/ttys: revision 1.16
etc/etc.rs6000/ttys: revision 1.2
etc/etc.i386/ttys: revision 1.20
etc/etc.acorn26/ttys: revision 1.4
etc/etc.iyonix/ttys: revision 1.4
etc/etc.netwinder/ttys: revision 1.8
etc/etc.mac68k/ttys: revision 1.20
etc/etc.evbarm/ttys: revision 1.7
etc/etc.pmax/ttys: revision 1.15
etc/etc.hpcmips/ttys: revision 1.10
share/terminfo/terminfo: revision 1.5
etc/etc.mvmeppc/ttys: revision 1.6
etc/etc.next68k/ttys: revision 1.10
etc/etc.acorn32/ttys: revision 1.9
etc/etc.ibmnws/ttys: revision 1.4
etc/etc.atari/ttys: revision 1.10
etc/etc.sgimips/ttys: revision 1.10
etc/etc.newsmips/ttys: revision 1.9
etc/etc.hpcarm/ttys: revision 1.6
etc/etc.cats/ttys: revision 1.7
etc/etc.amd64/ttys: revision 1.6
etc/etc.prep/ttys: revision 1.8
etc/etc.zaurus/ttys: revision 1.3
Per discussion on tech-userlevel, finally fix PR 10127:
move all ttyE* entries that use "vt100" emulation to wsvt25 term type.
The terminfo vt220 entry lacked (correctly) a delete key entry, which
was a regression against the netbsd-5 termcap entry. On the other hand,
only a very small number of foreign systems lacks support for wsvt25
nowadays.
Add a delete key capability to our wsvt25 entry. Fixes a problem noted by
David Lord on netbsd-users.
|
| 1.9.18.1 | 30-Oct-2012 |
yamt | sync with head
|
| 1.11.8.1 | 28-Oct-2019 |
martin | Pull up following revision(s) (requested by abs in ticket #384):
etc/etc.evbmips/ttys: revision 1.7
etc/etc.sparc64/ttys: revision 1.12
etc/etc.shark/ttys: revision 1.9
etc/etc.amiga/ttys: revision 1.25
etc/etc.arc/ttys: revision 1.9
etc/etc.sbmips/ttys: revision 1.6
etc/etc.landisk/ttys: revision 1.4
etc/etc.alpha/ttys: revision 1.13
etc/etc.amigappc/ttys: revision 1.4
etc/etc.mmeye/ttys: revision 1.8
etc/etc.ia64/ttys: revision 1.2
etc/etc.sandpoint/ttys: revision 1.8
etc/etc.hp300/ttys: revision 1.17
etc/etc.riscv/ttys: revision 1.2
etc/etc.i386/ttys: revision 1.21
etc/etc.aarch64/ttys: revision 1.2
etc/etc.algor/ttys: revision 1.6
etc/etc.sparc/ttys: revision 1.17
etc/etc.mipsco/ttys: revision 1.7
etc/etc.luna68k/ttys: revision 1.9
etc/etc.iyonix/ttys: revision 1.5
etc/etc.evbcf/ttys: revision 1.3
etc/etc.netwinder/ttys: revision 1.9
etc/etc.mvme68k/ttys: revision 1.10
etc/etc.evbarm/ttys: revision 1.8
etc/etc.evbsh3/ttys: revision 1.7
etc/etc.pmax/ttys: revision 1.16
etc/etc.hpcmips/ttys: revision 1.12
etc/etc.vax/ttys: revision 1.10
etc/etc.news68k/ttys: revision 1.10
etc/etc.mvmeppc/ttys: revision 1.7
etc/etc.hppa/ttys: revision 1.2
etc/etc.next68k/ttys: revision 1.11
etc/etc.ews4800mips/ttys: revision 1.3
etc/etc.epoc32/ttys: revision 1.2
etc/etc.emips/ttys: revision 1.2
etc/etc.evbppc/ttys: revision 1.7
etc/etc.sgimips/ttys: revision 1.11
etc/etc.or1k/ttys: revision 1.2
etc/etc.cesfic/ttys: revision 1.6
etc/etc.amd64/ttys: revision 1.7
etc/etc.playstation2/ttys: revision 1.7
etc/etc.zaurus/ttys: revision 1.4
etc/etc.newsmips/ttys: revision 1.10
Switch default console tty from /dev/console to /dev/constty
With this switch processes (such as xconsole) can open /dev/console
without breaking login on the text or serial console. This can be
trivially triggered by enabling xdm in rc.conf and hitting
Ctrl+Alt+F1 or equivalent once booted.
The changes:
- Add entry for /dev/console or /dev/constty if missing
- If a port's had /dev/console 'on' switch it off and enable /dev/constty
- If a port did not have /dev/console 'on', leave /dev/constty off
Some ports had /dev/console off and /dev/ttyE0 enabled, presumably to
avoid just this issue. It may make sense to adjust these also (but not
in this pass)
As discussed on current-users
|
| 1.11.6.1 | 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
